Mainstage is reading my buttons together instead of separate.
I use the M-Audio Oxygen 88 MIDI controller with Mainstage 2. When I try to assign a screen control to a button on my MIDI controller, it reads the buttons together so that every button performs the same action. I don't know if the problem is with the hardware or with the software, or if I am simply not doing something correctly. I have followed all the instructions in the manual. If anyone knows what the problem is or why it is happening, that information would be greatly appreciated.
Hi
Sounds like the controller keyboard is sending out the same MIDI messages for each button?
You need to check what messages are being sent from the controller, and make sure that they are different for each button/fader etc. The easiest way to do this would be using the MIDI activity monitor in Mainstage, but there may be an editor program for the Oxygen that wouldl help (or the 3rd party MIDI Monitor app).
CCT
Similar Messages
-
How do I get my soundtracks to stay together instead of separating them by artist?
How do I get my soundtracks to stay together instead of separating them by artist?
My bookmarks sidebar opens when I (accidentally) press Ctrl+b.
You also can open and close the sidebar using
View > Sidebar > Bookmarks
If you are displaying the orange Firefox button rather than the classic menu bar, tap the Alt key to display the menus temporarily and then you can use the View menu. -
my ipod screen has went white i have tried plugging it into itunes and pressing the home button and top button together for 10 seconds but it wont work!! this has happened twice before already and i havent even had it a year yet, i should have listened to my sister and never have bought one!!! someone help please ?
- Connect to computer and it it shows in iTune restore via iTunes
- Then try letting the battery fully drain. After charging for an hour try the reset (both buttons) and connecting to computer and restore. -
my iphone 4 doesnt want to start . all it shows is the apple icon.i have tried holding the home button together with the lock button. nothing seems to work . please help.
Plug the iPhone in with the Wall Charger. Then while plugged in do the Reset again, hold both Home and Power buttons until the iPhone Restarts. This usually begins to happen in less than 20 seconds time.
If you this does not work you can try to Restore the Firmware on your iPhone. If you decide to do this, connect your iPhone to your computer with iTunes open. Hold both the Home and Power buttons until the iPhone is detected by iTunes in Recovery Mode, this takes about 20 seconds time. Restore your iPhone.
If this does not work, you can try to Restore the Firmware on your iPhone in DFU Mode. Connect your iPhone to your computer with iTunes open. Hold both Home and Power buttons for exactly 10 seconds, release the Power Button and keep holding the Home Button until iTunes recognizes the iPhone in Recovery Mode, about 20 seconds more time. Restore the iPhone.
If this does not work and you have Warranty or AppleCare Coverage take your iPhone to Apple for resolution of the problem. -
My grandsons new Apple refurbed 35g ipad keeps locking up with a black screen amd nothing else. I have reset it many times pressing the home and off buttons together but it keeps locking up. Help,please!
Thank you for trying to help. I followed your instructions, it took 6 hours to download, and then said it could not solve the problem (something to do with error 9?). It will have to go back to Apple - its only 3 days since it came out of the package and its very disappointing for him. Looks like I have to hang around in the Apple store in Plymouth all tomorrow until they can fix it, or will change it. Thanks for your help.
-
My phone died last night and when I plugged it in it wouldn't turn on.I tried restarting it but it has yet to turn on since last night,It was just a black screen,i try the on/off and home buttons together but its not working,What should I do?
How long have you had your phone? Because if you've had it a long time, the battery in the phone might of died on you. Or have you dropped it in water, snow, from high up? All those things could of disconnected something internally in your phone, or permentaly damaged the internal hard drive its self, or the sims card.
-
My iPhone 4S on iOS7 is stuck on Apple Logo, and it goes off, then back to Apple Logo again for hours. Pressing home button together with sleep button does not help. Plugging the phone to Mac and restart does not help either. What do I do?
Have not backed up for months, so prefer not to lose the data.
Thank you for your help in advance.Restore iPhone with iTunes on computer. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time of holding both buttons. Click the Update or Restore button that iTunes offers.
-
my iPod touch isn't working correctly.it is displaying a white light and no matter what i try it isn't helping.tries holding the reset and power button together and tryed holding the power button in but it doesn't work. please can someone help?
Try the remaining items in the white-screen topic of.
iPod touch: Hardware troubleshooting
If not successful. let the battery fully drain and then charfe for an hour and try again.
Frequently a white scree nis due to a hardware problem. -
my iphone suddenly died as well. Holding the sleep button and home button together got it going again. Any ideas why this happened?
No, I don't think anyone here would know.
Mine has done that once or twice. -
MY iphone5 is stuck on apple logo. Sleep/wake and home button together don't work and connecting to iTunes doesn't either. Anyone any ideas
You need to hold both those buttons down for several seconds, until the Apple logo reappears. Don't release until then.
-
I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond. I have tried pressing the two buttons together and briefly get the Apple logo but still can not restart, the logo disappears. I have tried connecting to my iMac to restore the iPad but the device does not show up (I have an old iMac). What else can I do?
You need to be running Snow Leopard 10.6.8 at the very least in order to sync your iPad with iTunes so you could update your Mac, if it can be updated, and if you care to do so.
If that's not an option, you will have to find someone that can restore the device for you with their computer running iTunes or make an appointment at an Apple Store and ask them to restore the device for you.
I hope that you have an iCloud backup, because you will lose everything on the device when it is restored.
Snow Leopard can still be purchased in the U.S. Apple Online Store.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Also, I would not give up on the reset technique....holding down on the sleep and home buttons at the same time until the Apple logo appears. It takes about 10-15 seconds and sometimes just a little longer to get the logo to appear. -
Guys I have a iPod Touch 4g with iOs 4.3.3... I want portrait orientation lock button back... I miss it a lot... A dumb mute button shows instead of it... I hate it... Is there anyway I can get d PO lock button back? Any method?? Pleaaaaaaase help me guys
You can inform Apple of your displeasure:
Apple - iPod touch - Feedback
That is all. -
Can anyone help with the blue screen I just got. Tried to power back up like one Apple user suggested by holding the power and screen button together, came back briefly, then shut down. Now nothing. Any help?
Plug your device into the original charger & block in a wall outlet and leave it alone for a couple of hours. Then, while it is still plugged in, restart it by holding down the home button and the power button for 10-15 seconds until you see the Apple, then let go.
-
I started the lastest iPhone 5s software update then my phone just shut down and will not turn back on. I've tried the home button, the button plus the top right button together for 20 sec, plug it in and nothing
Plug your device into the original charger & block in a wall outlet and leave it alone for a couple of hours. Then, while it is still plugged in, restart it by holding down the home button and the power button for 10-15 seconds until you see the Apple, then let go.
-
I was prepare to update the latest facebook app, but on the half way suddenly stuck... i can't press any button! i can only press the swtich off and menu button together for restart my phone, and of course turn into full black screen and the apple comes back again to the screen and for a really long time. I did try to sync to my laptop but it can't work, the apple stay there forever. Can someone help me?
OR RECOVERY MODE
Recovery Mode
1. turn off the iPhone.
2. connect the USB cable to the iphone.
3. press the home button (the large round), and press and hold connect the other end of the USB cable to your PC.
4. continue to hold pemuto the home button.
5. within about 8/10 seconds will appear on the screen of the phone USB cable + iTunes.
6. your iphone is now in recovery mode.
7. will open automatically iTunes you will detect an iPhone in recovery mode.
To return to normal mode you just hold the home button + shut down: the Apple logo in about 1 minute and the iphone will reboot.
Maybe you are looking for
-
Unable to Open Project with RoboHelp 9
I've been working on a project using RoboHelp 9. Last night when I attempted to save RoboHelp froze. Looking at the CPU usage in task manager I saw it was still hovering between 45 and 50% CPU usage. Seeing as it was the end of the day anyway, I deci
-
Multi gestures not working on iPad Air ios8 onwards
Multi gestures not working on iPad Air ios8 onwards. Turning gestures off then on works briefly. It's annoying. Is the Air bust? In for rep-air?
-
Error while putting an object in Replicated Cache
Hi, I am running just a single node of coherence with Replicated cache. But when I am trying to add an object to it I am getting the below exception. However I don't get this error while doing the same thing in a Distributed cache. Can someone please
-
My MacBook Pro will connect to Wifi at one location (this is a secure location) but will not allow access to the internet. I will put in the password but will not display page. Other wifi capable devises do not have this issue but my Mac and my Iph
-
Is anyone successfully burning HD DVD?
I know there isn't an actual HD DVD burner out there, but there is a "backdoor" way to make an HD DVD. My question is, is anyone successfully doing this? What HD DVD player is it working on for playback? Is there any real news about the release of HD