MainStage message: possible conflict with third party midi or audio drivers

Just when I thought everything was going to be ok...
MainStage gives me a message that it detects a possible conflict with third party audio or midi drivers. The only midi device I'm using is class compliant (doesn't need a driver). My audio interface is an Apogee Duet and I'm using the most recent driver. Logic registers no such complaint. MainStage freezes. Any ideas?
Thanks,
Mark

Hello.
I am seeing this whenever MIDI events are being sent into either Logic or MainStage (primarily MainStage), while they are launching. On my setup, this will either crash the application during launch, ( sent to Apple ) or trigger this "...3rd party conflict / driver..." dialog.
In either instance, disabling incoming MIDI messages by turning them off on all connected MIDI devices, or as suggested, waiting to connect the device in question until, the application is fully launched, fixes my version of this issue.
** Please Note: In my experience, increasing the number incoming MIDI messages, exacerbates the issue and, makes a dialog or crash more likely to occur.
Hope this is helpful.

Similar Messages

Conflict between one or more third party MIDI or audio drivers

I have a Logic Pro 8 session with 17 audio files, each one of which have 2 to 4 plugins.
Every time I try to bounce the session to an .aiff or .mp3 this dialog box appears:
Logic Pro has detected a possible conflict between one or more third party MIDI or audio drivers.
Be sure to install the latest drivers for all audio and MIDI equipment connected to your computer, and remove any older or unused drivers.
I haven't installed any extra drivers/midi controllers/software. I just work entirely with Logic and an M-Audio external card (which is unplugged and audio preferences set to Built-In Input). And anyway, this issue arose after having recorded all the audios, after doing the editing, so no other possible installation move was done.
Please, help me find a solution.
Thanks.

I have looked in Library/Audio/MIDI Drivers and there is just one file called EmagicUSBMIDIDriver.plugin - can this be causing the problem?
Nothing on User/YourName/Library/Audio/MIDI Drivers.
I have found 3 AVID folders on Applications:
- Avid MetaSync Manager
- Avid MetaSync Publisher
- Avid_Uninstallers
Shall I remove these?
There is also an empty folder called Digidesign on User/Library/Audio/Plugins
I have tried it with the M-Audio card connected and selected in Logic, and it doesn't work.

Possible conflict between one or more third party midi or audio drivers

just wondering if anyone has any new info about this error yet. i can't resolve it and still can't open many of my logic 7 files.
thanks

koltonmusic wrote:
thanks for responding.
i have many times removed and or re-installed all of the midi drivers.
this problem occurs even without any midi or audio drivers in the system. this has been a problem since logic 8 came out for me and others. one user sent some L7 file sto apple and he said that evn apple support has reproduced the problem. that was last year.
i was just hoping that there might be some new info out there.
thanks
Hi,
In this case, I recommend you do a clean install of your operating system. Make sure you back up your important data beforehand.
Afterwards, install Logic 8, and test it with the internal audio only. In other words do NOT install any third party drivers of any kind.
This should work very well. If it does not, then I would suspect your motherboard has issues, and should be replaced by Apple.
Cheers

Conflict with Third Party Apps?

I am getting an occasional error saying there is a possible conflict with third party apps and that I need to check the drivers of my MIDI devices to see if they are up to date? Sorry but I did not record the exact wording. Does anyone know what this might mean, and how I need to go about checking drivers? I have a lot of interfaces and not sure how to see what's what. Thanks.

Hi Midlake,
Well, because they are known troublemakers. Search for 'takes' or 'take folder(s)' or 'comp' here on the forum and you'll find many a troubled soul crying out for help - including seasoned pro's, who thought they were beyond tears...
O, they are fine for recording many takes - but thats' all. I'll select the best takes/phrases.
regards, Erik.

CS4: conflict with third-party plugin

Hi
We face the issue that our plugin conflicts with an existing closed-source plugin. We use a unique developer ID and I believe that all declarations in our plugin are correct. My question; how can I get indesign to yield more informative error messages, than just the usual conflict dialog upon startup?
-and can the conflict be caused by other issues than misdefined pmid's?
Thanks!
Kind regards Toke

I never encountered conflicts other than the ID clash. You can verify if the culprit is your plugin iD or not by trying the plugin ID of some other plugin you had developed in this plugin just for a test to see if it resolves the problem.
You could also try and comment out declerations from your plugin to zero down on the decleration that is causing the issues.
Manan Joshi
- Efficient InDesign Solutions -
MetaDesign Solutions
http://metadesignsolutions.com/services/indesign-development.php

Class conflicts with third-party libraries on j2ee engine

Hi,
I am deploying a repository manager into EP. In my repository I referenced javax.xml.namespace.QName, which conflicts with the one declared in jaxrpc.jar in j2ee/cluster/server0/bin/ext/webservices_lib.
I am not very clear about how NW j2ee engine loads classes, but it seems that it loads classes in j2ee/cluster/server0/bin/ext/webservices_lib first. As a result, I got a class confliction error:
java.lang.NoSuchMethodError: javax.xml.namespace.QName.<init>(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)V
If I remove QName.class from the jar in webservices_lib, it works fine, but this not the right way. I have read Note 990854, but not clear about how to do. Could anyone give any help?
Thanks,
Ray

Close this thread as it makes little sense.

Third party MIDI/Audio driver conflict message!@#@!#@

I'm getting the "Logic Pro has detected a possible conflict between one or more third party MIDI or audio drivers" message.
I'm running a G5 dual 2 gig, OSX 10.4.8, Logic Pro 7.2.3, Emagic AMT8 and RME DSP9652.
When I start Logic, it hangs on "checking MIDI drivers" forever, then gives me the conflict message 4 or 5 times, then tells me MIDI services won't be available.
I have not changed ANYTHING... it's worked fine forever. I removed the EmagicUSBMIDIDriver.plugin from the MIDI drivers folder, tried it with nothing in the folder, and same thing (I had a Yamaha MIDI driver and one from the RME, but I dumped them. It's worked fine with the additional drivers for a long time, so I doubt that's the problem). I reloaded the EmagicUSBMIDIDriver.plugin from the 7.2 installer DVD, same thing.
Someone mentioned this problem was caused by too many devices drawing current on the USB bus, but I only have a mouse/keyboard, printer, XS Key, and a iLok for Waves on the the USB bus.
HELP!
Mitchell

I have looked in Library/Audio/MIDI Drivers and there is just one file called EmagicUSBMIDIDriver.plugin - can this be causing the problem?
Nothing on User/YourName/Library/Audio/MIDI Drivers.
I have found 3 AVID folders on Applications:
- Avid MetaSync Manager
- Avid MetaSync Publisher
- Avid_Uninstallers
Shall I remove these?
There is also an empty folder called Digidesign on User/Library/Audio/Plugins
I have tried it with the M-Audio card connected and selected in Logic, and it doesn't work.

Conflict between third party drivers

I've been starting to get those error-messages that says;
"Logic Pro has detected a possible conflict between one or more third party MIDI or audio drivers.
Be sure to install the latest drivers for all audio and MIDI equipment connected to your computer, and remove any older unused drivers."
Then I have an option to press "OK", I do and it appears 3-4 times, and then eventually Logic Pro starts up, but all is very slow. After a reboot it disapears, but as soon as I restart Logic it comes back again.
I tried to disconnect every unit, remove and re-install every driver, but it's still there.
I'm using a Powermac 2 x 2.0 with a MOTU soundcard, and I hava an old MT4 connected. Anyone who experienced a similar situation?
Thanks in advance.

I have looked in Library/Audio/MIDI Drivers and there is just one file called EmagicUSBMIDIDriver.plugin - can this be causing the problem?
Nothing on User/YourName/Library/Audio/MIDI Drivers.
I have found 3 AVID folders on Applications:
- Avid MetaSync Manager
- Avid MetaSync Publisher
- Avid_Uninstallers
Shall I remove these?
There is also an empty folder called Digidesign on User/Library/Audio/Plugins
I have tried it with the M-Audio card connected and selected in Logic, and it doesn't work.

Garage band wont work, need to install midi or audio drivers?

tried backing up my comp to install OSX leopard but failed. now garage band wont work! I keep getting this message...also want to know if its possible to upgrade to osx leopard with a 4th gen macbook that runs osx 10.4.11
*garageband has detected a possible conflict between one or more third party midi or audio drivers.*
Be sure to install the latest drivers for all audio and MIDI equipment connected to your computer. For instructions on removing older drivers, consult the manufacturers' documentation.

Im having the same problem, I upgraded my IMAC and was using tiger and I upgraded it to MAC 10.5.7, now GarageBand wont work saying my midi and audio drivers arent correct. My Reason 4.0 wont start either saying the same thing failed to open the midi library. My Protools works fine but I dont know how to update the audio and midi drivers that it matches the software I uploaded. I also went to the audio midi set up and it read, Audio MIDI Setup was unable to launch the MIDI Server. This means that you will be unable to view or edit your MIDI configurations.
Improperly written MIDI drivers can prevent the MIDI Server from launching successfully. If you have recently installed a new MIDI driver, try uninstalling it and then relaunching Audio MIDI Setup. If Audio MIDI Setup works correctly after that, then please contact the driver's manufacturer for further support.

Is it possible for a third party to be added to an esatblished text message thread?

Is it possible for a third party to be added to a text message thread (between 2 people). This test message thread has been established for over a year! He says he could see our message history via his icloud. Is this possible? Please help.....

How "third party" are we talking about here.....? Not another user (usually family) who has access to the same Apple Id, is it? I know, that seems too obvious.....
Could you explain the situation a little more? Did you or the other party forward your iMessage ("text" between "i" devices/Mac users) to this 3rd party? How did this 3rd party end up with any portion of your conversation (or is that the question)? I know it is easy to forward a portion of your conversation to another user. When you choose to forward a "text bubble", you receive round check boxes next to all messages in the conversation; you just pick and choose how much you want the 3rd party to receive. Other than that method, I know of no way to loop in a 3rd party to an existing conversation via iPhone or iPad.
Anyone else?
Best of luck,
Bill

SharePoint 2013 on-premises integration with third party email account

the Email sending issue from SharePoint is causing too much time waste
First let me explain how our SharePoint is deployed
Sharepoint version : 2013
Deployment type : on-premise
Authentication : from Domain controller also hosted locally
domain name ; say domain.com this domain.com is same as our website address hosted on godaddy
SharePoint computer name on local DNS : sharepoint.domain.com
OS and IIS : 2008 r2 , IIS 7.5
Network firewall : 25 26 ports opened for sharepoint , both incoming and outgoing.
Server firewall : turned off
Email configuration Attempts by IIS 6.0
We tried following setting on IIS 6.0 SMTP local server properties
In General tab
qualified name was shown as : sharepoint.dts-solution.com
IP assigned : sharepoint server IP , advanced putted two entries of IP with ports as 25,26
In Access tab
Authentication : selected as Anonymous
Connection : All except below list : empty list
Relay : only the list below , one entry as 127.0.0.1 and other is local static IP of SharePoint server
in Delivery tab
outbound security : Basic authentication : accessed user in AD and given the right password, also checked with annonymous -not working
outbound connection: all default values and port = 25
Advance : fully qualified domain name = sharepoint.domain.com , DNS test showed success, rest every check box unchecked
On sharepoint central management settings
Outbound email = sharepoint.domain.com
from and reply to address = [email protected]
IIS 7.5 SMTP settings
In IIS 7.5 sharepoint application we added SMTP settings as smtp server = godaddy out going smtp , user name as [email protected] , password = godaddy password , port : godaddy outgoing port .
Godaddy account
Our website hosted on godaddy with same name as domain.com
open relay not possible on emails.
Results
After setting alerts on SharePoint sites and assigning tasks with alerts we receive email in queue folder but they never get forwarded. We just wish to use any of our email *.domain.com to send outgoing emails from SharePoint . Its been a while we have no
success.
Tech Learner

Hi,
As I understand, you are using SharePoint 2013 integrating with third party SMTP server which provides email function.
From SharePoint side, I'd suggest you refer to the link below to configure email integration:
http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
If you have already confirm that message is sent from SharePoint, while stuck in queue on SMTP server, then the issue might be related to relay on SMTP server. Since the issue is related to third party product, we do not have enough resource here,
I'd recommend you contact their support engineer for more assistance:
https://support.godaddy.com/help/category/154/email
https://support.godaddy.com/help/article/3552/managing-your-email-account-smtp-relays
Thanks for the understanding.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

How do you turn third-party midi loops into Apple Loops?

Does anyone know how to turn third-party midi loops into Apple Loops? I've got hundreds of short midi files that I purchased, and I would like to be able to use them in the loop browser of Logic Studio. I tried some of the obvious ways of doing this, like using Apple Loop Utility, but it doesn't seem to recognize .mid files. Seems like .mid files would be right up its alley, so maybe I'm doing something wrong...

Yes, have the same problem but with wav loops. i have 75000 wav loops from third part and do not find how to "logicized" it. For the moment i can use them into a project but they are not adapting when i change the bpm of the projetc for exemple.
If you know the solution i would be rescued

Integration of ChaRM with third party tools

Hi all,
We are in the process of building the solution for Change Request Management implementation integrated with third party tool.
As the normal process for ChaRM is to work with the Service Desk functionality (to raise a ticket, then support message, change request, change document etc...), but what we need is create the change request, and change document directly with ChaRM without using the Service Desk functionality.
Did anybody come across this situation?
Please share your experience.
Thanks in advance.
Balaji

Hi Balaji,
there is no problem, as I understand, you want to use ChaRM without Service Desk. OK, than you create directly a Change Request in CRMD_ORDER, the transaction type you have to select is SDCR (standard transaction type), you have to approve it and then you can create a change document, it is not necessary that you start with a Service Desk ticket like SLFN.
You need configured TMS a SolMan Project with a Maintenance Cycle, thats it (but this is enough , don't forget the customizing).
I hope I understood you correct
Udo

How to integrate iReceivables with third party payment system?

Hi,
My requirement is to integrate iReceivables with third party payment system.
Can anyone guide me to achieve this.
Thanks & Regards,
Sunita

Hello Prasad,
<b>Connection with an External Payroll System</b>
Payroll Outsourcing functionality allows you to compile master data or payroll data in the SAP system to submit to a third-party service provider in an electronic format. The Outsourcing solution available in the United States and Canada provides a generic interface which writes data into an IDoc (Intermediate Document) for transport to a third-party system. In order to transport data into and out of the SAP system, you must set up a logical system, partner definition, and outsourcing ports.
If you have built your own payroll interface, using the Interface Toolbox, for example, you can use the Import section of this scenario. The Export section applies only to the transport of IDocs.
For more information regarding outsourcing, refer to the SAP Library, Human Resources -> PY Payroll -> PY-US United States Payroll or PY-CA Canada Payroll -> Outsourcing.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/af/f4ea3444e9c47fe10000009b38f83b/frameset.htm
Import Payroll Results from a Third-Party System
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0a/e62481feaf11d1a5500060087832f8/frameset.htm
regards
Prasad
Message was edited by:
prasad chintala

SAP IDM 7.0 integration with third party system

Hi Experts,
I know SAP IDM 7.0 can integrate with third party systems and create user ids on most of the third party systems.
But I need to know regarding If it is possible to integrate with following systems
1) Microsoft Exchange 2007 ( I know till exchange 2003 SAP IDM support )
2) Microsoft Active directory 2008 ( I know till Actice directory 2003)
3) EMC Documentum 6.5
4) ARIS 7.1.0
5) BlackBoard, Release 9.0
6) Oracle 10g ( Is it possible to create users at oracle level ? or at what level ? )
7) Sun Solaris Sparc ( Is it possible to create users at OS level )
If you have information how on this please share. I know that provisioning framework will have templates for most of the target systems. I want to know if they are available for above systems on SAP IDM 7.0 or if not have we can connect to them?

Hi Matthew
Your expertise in SAP IDM is indeed a great help!!
>Can't see why not, it's all done via SQL commands. I've done similar things with MSSQL
You mean that there will be oracle 10g drivers/oledb connectors in SAP IDM and in through SQL commands like "create user alfredo identified by alfredos_secret; " we can create user in oracle database ?. As you said this should be possible. What about creating user( user management ) in oracle 10g application like dba or scot and assigning the privileges in oracle application?
>might need to do via UNIX scripts, but it can be done
You mean that Unix scripts will be defined in SAP IDM and SAP IDM will execute these scripts in the Sun Solaris Sparc ?. It should be possible as you said. By the way how we will be able connect to Sun Solaris sparc ? Is it via the option "file " under the "Repositories" with repositories wizard and later executing the file from SAP IDM ?
Thank you once again for your expert answers on third party systems.

MainStage message: possible conflict with third party midi or audio drivers

Similar Messages

Maybe you are looking for