Mainstage Starter Templates Not Loading

After updating to 2.1, I noticed the "Starter Templates" are not loading. I have reinstalled all Mainstage content but still not functioning. Any ideas?
Thank you.

Yes, all other templates work except the Starter Rig templates. When I click in Guitar Starter rig, only one rig loads rather than the dozen or so that used to load.

Similar Messages

Flash File placed in template not loading

I've created a simple flash banner to use on a website I'm
developing. This website is built off of a template, in which I
placed the flash file.
When I preview the template, it works wonderfully. Trouble
is, when I apply the template to all my pages, and then preview one
of those pages, the flash file is not loading.
Anyone have an idea what I'm doing wrong? Go to the web
address below to see the files:
www.vanhornconstruction.com/temp

Make the link to the SWF a root relative one in the Template
page.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Zimmerman74" <[email protected]> wrote in
message
news:flljbb$efv$[email protected]..
> I've created a simple flash banner to use on a website
I'm developing.
> This
> website is built off of a template, in which I placed
the flash file.
>
> When I preview the template, it works wonderfully.
Trouble is, when I
> apply
> the template to all my pages, and then preview one of
those pages, the
> flash
> file is not loading.
>
> Anyone have an idea what I'm doing wrong? Go to the web
address below to
> see
> the files:
>
> www.vanhornconstruction.com/temp
>

Sample Templates Not Loading Correctly

In Dreamweaver CS3, my sample template pages are not loading
with the CSS or image links. If I go into the folder where the
samples are kept, it will load the CSS and images. But in
Dreamweaver, I seemed to have changed something that I can't figure
out what it was and how to fix it.
Is there a way to redirect your site images and CSS to a new
folder or do you have to do each one individually?

If you drag your files to new folders WITHIN DW;s file list,
you should get
a message asking if you want DW to update links. When you
click YES, DW will
correct all affected links for you.
"speedr69" <[email protected]> wrote in
message
news:f9m1io$61$[email protected]..
> In Dreamweaver CS3, my sample template pages are not
loading with the CSS
> or
> image links. If I go into the folder where the samples
are kept, it will
> load
> the CSS and images. But in Dreamweaver, I seemed to have
changed something
> that
> I can't figure out what it was and how to fix it.
>
> Is there a way to redirect your site images and CSS to a
new folder or do
> you
> have to do each one individually?
>

VDS didn't start: Could not load JDBC driver

Hello,
I want to start the VDS Tutorial, but I get an error:
Exception: Data source 'Derby database' failed. Check your CLASSPATH! (in Tools
-> Options) Could not load JDBC driver 'org.apache.derby.jdbc.EmbeddedDriver'
Shutting down...
Data source 'Derby database' failed. Check your CLASSPATH! (in Tools -> Options)
Could not load JDBC driver 'org.apache.derby.jdbc.EmbeddedDriver'
But I add the derby.jar file in the VDS under Tools - Options - Classpath
Have you any ideas...?!

I try to start the server without the tutorial and that works...

JSPM fails to start: Could not load data model com.sap.sdt.jspm.model

Hi
We running windows server with ERP 6.0 and this was coppied from another server.
The JSPM fails with the following error.
Trouble Ticket Report
Java Support Package Manager for SAP NetWeaver'04s
SID................: $(/J2EE/StandardSystem/SAPSystemName)
Hostname...........: $(/J2EE/SAPGlobalHost)
Install directory..: $(/J2EE/StandardSystem/SAPSIDDirectory)
Database...........: $(/J2EE/DBSystem/DBInfoName)
Operating System...: $(/J2EE/StandardSystem/CentralInstance/J2EEEngineInstanceHost/OpSysType)
JDK version........: $(/SystemProperties/JavaVersion) $(/SystemProperties/JavaVendor)
JSPM version.......: $(/MAIN_VERSION)
System release.....: $(/J2EE/StandardSystem/Version)
ABAP stack present.: $(/J2EE/StandardSystem/BCSystemPresent)
The execution ended in error.
Could not load data model com.sap.sdt.jspm.model.JspmDataModel. See previous messages.
Class with name com.sap.sdt.j2ee.model.NWDISystemRole not found.
More information can be found in the log file .
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.tools.model.LoadException
Could not load data model com.sap.sdt.jspm.model.JspmDataModel. See previous messages.
JSPM_MAIN
JSPMPhases
NetWeaver Upgrade
SAPJup
Java Upgrade
SAPJup.LOG
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[D:
usr
sap
ERP
DVEBMGS10
j2ee
JSPM
log
log_2008_11_17_12_39_25
SAPJup.LOG]/>
<!PATTERN[SAPJup.LOG]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
#1.5 #C0000A0A0A3D00000000000F010E329300045BE031D40CA8#1226918373625#/System/Server/Upgrade/Jump##com.sap.sdt.ucp.pce.build.BuilderDirector.extractElements(BuilderDirector.java:132)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.pce.build.BuilderDirector.extractElements(BuilderDirector.java:132)#Java###Tag with name found.#2#ControlUnit#JSPM#
#1.5 #C0000A0A0A3D000000000010010E329300045BE031D577F0#1226918373718#/System/Server/Upgrade/Jump##com.sap.sdt.ucp.pce.build.BuilderDirector.createUnits(BuilderDirector.java:186)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.pce.build.BuilderDirector.createUnits(BuilderDirector.java:186)#Java###Creating control unit .#1#JSPM#
#1.5 #C0000A0A0A3D000000000011010E329300045BE031D6E720#1226918373812#/System/Server/Upgrade/Jump##com.sap.sdt.ucp.pce.ctrl.ExecutionDialog.showWelcomeDialog(ExecutionDialog.java:421)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.pce.ctrl.ExecutionDialog.showWelcomeDialog(ExecutionDialog.java:421)#Java###Could not process dialog because execution dialogs have been suppressed.#1#JspmWelcomeDialog#
#1.5 #C0000A0A0A3D000000000012010E329300045BE031D6E720#1226918373812#/System/Server/Upgrade/Jump##com.sap.sdt.ucp.pce.ctrl.ActionExecutor.execute(ActionExecutor.java:103)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.pce.ctrl.ActionExecutor.execute(ActionExecutor.java:103)#Java###Starting execution of action with name and type .#2#Unit#JSPM#
#1.5 #C0000A0A0A3D000000000013010E329300045BE032541218#1226918382015#/System/Server/Upgrade/Jump##com.sap.sdt.ucp.pce.ctrl.ActionExecutor.execute(ActionExecutor.java:103)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.pce.ctrl.ActionExecutor.execute(ActionExecutor.java:103)#Java###Starting execution of action with name and type .#2#Modul#JSPMPhases#
#1.5 #C0000A0A0A3D000000000014010E329300045BE032541218#1226918382015#/System/Server/Upgrade/Jump##com.sap.sdt.ucp.pce.ctrl.ActionExecutor.execute(ActionExecutor.java:103)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.pce.ctrl.ActionExecutor.execute(ActionExecutor.java:103)#Java###Starting execution of action with name and type .#2#Phase#JSPM_MAIN#
#1.5 #C0000A0A0A3D000000000015010E329300045BE0333D02E8#1226918397281#/System/Server/Upgrade/Jump##com.sap.sdt.tools.model.AbstractDataModelElement.getClassByName(AbstractDataModelElement.java:743)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.tools.model.AbstractDataModelElement.getClassByName(AbstractDataModelElement.java:743)#Java###Class with name com.sap.sdt.j2ee.model.NWDISystemRole not found.##
#1.5 #C0000A0A0A3D000000000016010E329300045BE0333D3D80#1226918397296#/System/Server/Upgrade/Jump##com.sap.sdt.tools.model.DataModel.load(DataModel.java:89)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.tools.model.DataModel.load(DataModel.java:89)#Java###Could not load data model com.sap.sdt.jspm.model.JspmDataModel. See previous messages.##

Hi Patrick ,
What user did you use to start JSPM? Was it <sid>adm? Also based on the error it seems there is something wrong with DataModel.xml JSPM uses. And you've mentioned it was copied from another system if I get it right.
So as a quick workaround you could try removing:
- Jspm.DataModel.xml
- Jspm.J2EE.DataModel.xml
- Jspm.JSPM.DataModel.xml
from ../j2ee/JSPM/data/variables directory and give JSPM another try.
Please make sure the rest of the XMLs are in place otherwise JSPM won't start.
Regards,
Vasil

Starter Templates Not Creating CSS Files

I'm using the About Page starter template. It asks me to save the About Page.css file, which I do, and then it asks me to name the new page, which I do, then it asks me to copy the dependent files, including the About Page.css file, which I do. The next box that pops up tells me that there is no About Page.css file and when the template opens it is only partially styled. I tried renaming the file and/or saving it somewhere else but nothing works. I tried the blog template and get the same result with the blog css file missing.
Why is this happening and how can I fix it?
Kim

Thanks for your help but it's really not worth the effort.
I have a county government website running fine with the current set up. Local files on my file server and remote files on the web server. It's been working great for years.
I wanted to try out the new starter templates just to see how they operate. They simply refuse to create that one css file. All the other dependent files are created and stored where I indicate. Only the one file is missing on each template. It's not the end of the world. I just thought I was overlooking something.
Thanks again.

Query Template Not Loading

Hi,
We are using XMII 12.0 and NW 7.1,
We have deployed Query templates in web pages and while loading , applets are not loading...
in NWA we saw the following error
Unable to load template PATH [pathId=<id no>,<Query Template Path>]..
Category: /Applications/XMII
Location: com.sap.xmii.Illuminator.templates.TemplateManager
Application: sap.com/xappsxmiiear
but the template mentioned in the error is in the same path and working fine if we open from work bench.
and also we are seeing the following error.
Exception of type com.sap.sql.log.OpenSQLException caught: Synchronisation reader could not access data source java:comp/env/jdbc/XMIIDataSource..
Pages are not working...
What is the problem? How to solve it?
Regards,
Senthil

I think that you have the wrong version of NW for the installation of MII 12.0. It is not NW 7.1 (NWCE), but rather 2004s (7.0?).
Check the installation guide. There may be some other downloads required before loading NW.
Good luck,
Mike

Templates not loading...

Hi,
I've just upgraded to the latest Final Cut Studio (from FCS1). All is good and rosy, but if I try to open a template in Motion 4 (or FCP7), nothing happens.
This is on my Mac Pro, which previously had FCS1 installed. I put a clean install on my Macbook, and it works without a hitch.
I've not changed anything in Motion; in FCP I've only changed the scratch disk...it all worked fine prior to upgrading.
Lost file links maybe? Any ideas?
Cheers

No worries - applying the support article in the forum heading fixed the problem.
Didn't realise it was the same thing (I got no error pop-up).
Here's the support article link if you're reading this in the far future...
http://support.apple.com/kb/TS3061

CS5 won't start - "Could not load actions because an unexpected end-of-file was encountered"

It's version 12.0.2. When I click ok, it says "Could not initialize photoshop because the preferences file was invalid (it has been deleted)".
Any ideas what I could do to get the program to start? I've restarted the machine several times.

I managed to sort this out now - by deleting preferences

Page template not loading into BC

HI there
I have created a new template by creating a page (not from masters) and have added {tag_pagecontent} by adding HTML, and uploaded it to BC. The template is not ppearing in templates.
Can anyone please help me? Has something changed with last update?
Thanks so much
Bec.

ok so I have create a page in my muse file and called it template_recipes
Last time i did this I was told not to use a master page. So i created this page from scratch using no master, and embedded the html code tag {tag_pagecontent]
Published it to BC and no template was found in "Page Templates" in BC
So then i did the same steps but created the page with a Master and published it to BC.... Still no template in "page templates"
Nothing is working and I am tearing my hair out... can anyone lhelp me please????

Java web start will not load on my computer

When I try and start the IR (PI version 7.1) I get the download of Java Web Start aborting as it complains that the client.jar file is corrupt.
I just got a colleague to do the same thing on her computer and the dowload worked perfectly!
I have JRE 1.5.0.18 on my computer, my colleague has 1.6 on her machine.
HELP!
Ross Goodman

Hi Ross,
Perform the below step:
Integration Builder> Administration-> JAVA Web Start Administration--> Re-initialization and force signing.
This function will cause the above re-collection and additionally a re-signing of ALL resources with a dummy certificate. The original SAP signatures of the jarfiles will be lost. It is recommended to use this function only in test systems. To get back the original SAP signatures the application has to be deployed again.
Thanks,

Certain websites sometimes do not load properly?

Randomly some websites have started to not load properly. For example there may just be a white screen with the links and things from the website but they may not be in the right place, right font, etc, as if firefox is stopping the webpage downloading in the middle of it doing so. Another example is the webpage may appear to have finished loading but the text and links will be on top of each other and in the wrong places.
I have tried reinstalling firefox and updating to the latest version but it has made no difference.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Photoshop CS6 Not Loading: Actions & Preferences Errors

Photoshop CS6 has been working like a dream, and recently it has pushed some very large files.
But, upon trying to open Photoshop this morning, I get these two messages:
Could not load actions because an unexpected end-of-file was encountered.
Could not initialize Photoshop because the Preferences file was invalid (it has been deleted).
          - although the file was still in the AppData...Adobe Photoshop CS6 Settings.
Tried to 'restore' Preferences:
Keyboard - CTRL ALT SHFT upon clicking PSD icon
Said 'Yes' to allow changes to system
Still received same two messages
Removed the Adobe Photoshop CS6 Prefs.psp
          Restarted Photoshop, still received same two messages.
          Tried resetting, CTL ALT SHFT, again still same two messages.
Read Adobe thread to 'rename' the Actions Palette.psp, but keep it in the folder:
I renamed it 'renamed' and left the Adobe Photoshop CS6 Prefs.psp in the folder as well.
Did not receive the 'load actions' error, but
Still received the 'Preference file was invalid' message.
Tried CTRL ALT SHFT to reset,
Still received the 'Preference file was invalid' message.
Left the Actions as 'renamed', but removed the Adobe Photoshop CS6 Prefs.psp file as well.
Still received the 'Preference file was invalid' message.
Tried CTRL ALT SHFT to reset,
Still received the 'Preference file was invalid' message.
Do I need to do a re-install?
Thanks bunches,

I am having only the single issue:
Could not initialize Photoshop because preferences files was invalid (it has been deleted).
What happened was that I had to do a force quit (Mac OSX 10.8.4) due to Spotlight and Parallels Win 7 running a system slowdown.   I don't believe my new HD is corrupted. BUt there has to be a way to get PShop working again.. I've tried shift start and not loading 3rd party plugins, but nothing is working.
UPDATE: Download and reinstall fixed it after uninstalling and removing preferences. However, you can't use the CC Applications Manager to do so. You have to do a direct download.
Message was edited by: jefferis

MainStage patches not loading Guitar Rig 4 patches

I'm trying to use Guitar Rig 4 as a channel strip plugin for live EG performance. Unfortunately Mainstage seems unable to properly recall assigned Guitar Rig patches and/or recall screen mapping for those patches. It seems like it only loads the first GR4 patch. If I open up the plugin I see the correct GR4 plugin name but when I double click it seems to then load.
I've mapped screen controls to specific editable functions within Guitar Rig 4's patch. Unfortunately after reboot Mainstage patches do not properly load Guitar Rig patches and screen control mapping breaks.
For instance within a specific Mainstage patch, I have a Guitar Rig 4 patch that has a stereo delay. I screen map to the stereo delay's controllable functions (mix, feedback, etc). I test it out and everything works properly. I save. I restart and then the screen controls lose their mappings.
So what's up? Is it a user error or a limitation between the two softwares?
Andy

Hi again,
OK so to map a MS toggle switch to activate an event in a Plug-in like Guitar Rig 4?
- You have Pedalboard as an insert in the channel strip?
- You have Guitar Rig as an insert in the channel strip?
- if so
- selecect the unassigned button in Manstage edit mode
- MS will open the screen control inspector panel below the edit view of your MS edit window
- In the third tab 'unassined' of the inspector you sohould see columns make sure you're looking at the left most col
- You will find the name of the channel strip (guitar-1) or something like that - select it
- The next col will fill with info on the channel strip including the inserts - select Guitar Rig 4- The next col will fill with all the attributes of the Guitar Rig patch you've selected as an insert
- The list will contain all the controllable attrubutes of the componants that mack up the guitar rig patch.
- Select the WAH/ON/OFF or what have you.
- Now the switch in MS will control the ON/OFF state of the WAH efect in that Guitar Rig patch.
The same process works for rotary knobs so you can have MS contol the ON/OFF function and allow you to adjust say the Gain and Tone of your choosen Guitar Rig effect. Obviously you can use for Amps/effects/Cabs/and even Tapdeck etc.
Once you have a channel strip set up and your happy with the layout of MS you can save the channel strip and use it in Logic and vise versa - so I have started a library when my guitar and bass patches are channel strips.
This is because I mix up componants of the various Plig-ins I have say - Pedelboard => Ampdesigner => Guitar Rig 4 => Amplitube 3 => and Redwirez as a single 'patch'. So playing live I use the appropriate 'patch' strip in MS and when recording the I use same 'patch' strip in Logic.
Have fun!

Dw Templates - .dwt.php & Movie not loaded

Hi,
I'm in the middle of converting an existing website to .dwt for use with Contribute. All is going well, I have my editable regions working and my templates folder in the correct place.
I've run into a few problems, the primary one being Flash.
Dw is saving the templates as filename.dwt.php. They do function as you'd expect .dwt to function, but I can't find a reason for it doing this. Is this because they need to be .php files themselves to correctly use the code, or is this a setting I have somewhere? I've searched but I can't see details on this. Will this cause problems?
Dw would connect to the root domain, but not to the host directory (not the first time it has happened, I swear it doesn't like me). I've double checked permissions and logins, but it keeps throwing a permissions/directory doesn't exist error. This is not a problem as such as I can browse to it from the root, but I thought it may have some impact on the following problem. It is definitely affecting the check in/check out functionality, but for setup this is tolerable. If anyone knows reasons why or how to fix it, I'd love to know.
I had the files running on a local WAMP server. The template is *perfect*, exactly what I want the page/s based on it to look like. (Dw does throw a notification about placing editable regions inside a block level element and that meaning that users cannot create new blocks, which is fine by me, but might have some bearing?). In uneditable regions of the template there are two separate .swf files. When I view the template page, the files are visible and play as they are supposed to. When I view the page created from this template on the WAMP server, these areas collapse. When I view this page on the live test server, the areas are the correct size, but the movies do not play. A right click shows a greyed out notification of "movie not loaded". The page source shows that the links are relative and pointing to the correct place. The spry assets on the same page do load, all the other links work (relative), and I have checked that the .swf files are indeed on the server, working, and in the correct location. What could be causing the template-based page to malfunction like this? Am I missing something simple?
Any help with this would be greatly appreciated. This is my first time converting to templates and trying to get a site ready for Contribute and I would like to get a better understanding of why it is doing what it is doing. I've been going around in circles for hours and could really use a couple more heads on the matter.
Cheers,
Abbey

Hi Bob.
Yes, I am 100% sure; have just checked again. I cannot even
get it to work
on my local machine.
Where alse can I start looking for?
I am really desperate.
Regards,
Deon
"Bob Pierce" <[email protected]> wrote in
news:fulj1k$9t5$1
@forums.macromedia.com:
> Are you sure that the .swf was uploaded to your server?
>

Mainstage Starter Templates Not Loading

Similar Messages

Maybe you are looking for