Mainstage Ultrabeat into Logic Pro 8?
Hi,
Does anyone know how I could Export a Mainstage "Ultrabeat" (not just a loop but say a five minute improvision jam) into Logic Pro 8, so I could improvise over it in Logic Pro 8? Especially the rhythm combinations. Thanks!
I think you can use something like Soundflower to route audio from one app into another.
You can always just open the same UB channel strip setting in Logic and do everything in there that you would do in Mainstage.
Similar Messages
-
New bug in Ultrabeat into Logic Pro 8.0.1
Hey guys check this... a brand new bug (hope it would be only my mac, but with 8.0.0 there wasn't)
so open ultrabeat, choose the preset called Drag & drop samples under Drum Kits.
(just to use one free preset)
load a file and record something, then press play in order to listen your drum and try to load an other sample to make comparison (example: load a kick, do a 4/4 drum, try to replace the kick with an other sample and check the Preview sample in ultrabeat to try comparison... )
after this update no more Preview sample in ultrabeat voice (and than note will stop on playing when u try that function
sorry for the englishfinally i find someone else with the same prob, o already post into apple.com too
yes here the same, bug new in 8.0.1, cause on logic 8.0.0 all works fine (except some click noise when you pre-listen a file in autoloop)
however here what i can say to you (it's 3 days i'm studyng this cause i make a massive use of ultrabeat)
- no matter both power pc / intel soffer of this bug
- i try to update to leopard from my 10.4.11 (same bug) tryin a new os installation (same bug), tryn without audio card and driver (same bug)
so i really don't know how to solve it, cause there are only few people that have this problem
big mistake and big mistery -
Rewire Mainstage into Logic Pro / internal soundcard
Hey there, Logic Users!
I noticed that some of the Mainstage sounds are not too shabby and I would like them to load into Logic Pro.
Since my external soundcard is pretty much fried, I wanted to know if there's a way to rewire Mainstage into Logic Pro using the internal soundcard that the iMac provides?
Thanks for all the responses,
VNvideonoob wrote:
I noticed that some of the Mainstage sounds are not too shabby and I would like them to load into Logic Pro.
Hi
Mainstage and Logic share exactly the same plugins, channel strip settings and the like (with the notable exceptions of Playback and Loopback, which are only available in Mainstage).
There should be no need to attempt to hook up Mainstage to Logic simplly to load any sounds into Logic. Save the plugin presets or channel strips in Mainstage, and then Load them in Logic.
CCT -
I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9. I can not get all the track to play with internal instrument sounds... only the piano track. how can I get the others to play... drums, bass etc???? Help
Don't drag the midi into an open Logic project. The tracks won't set up correctly.
'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on. -
Transferring Files from Triton Le (via Smart card) into Logic pro 9
I'm trying to get original material from my triton Le smart card into Logic pro 9. I've looked at a couple forums and tried different ways. I know i can do it track by track/ real time audio, but would prefer having it as midi, as i've found cutting and splicing the realtime has produced some glitches in the music. The other way was to use a usb floppy disk drive save my material as midi on the floppy then open it in logic. This i've tried but must be missing something because i drag the file from my 17n1 card reader (which reads my smart card) into the floppy and it just takes the file as it is.
This will get figured out soon, some help would be great!!!HI guys first thanks for all the replies amazing that some one still listen to these post thanks ,especially i saw pancenter involved in many logic related problems so wow man keep going thanks .
what i did today i completlly reinstal my apple mac book pro ,instaled logic pro 8 on it and boom all is working with no problem so this mean that Mac pro has same pice of software which is making whole thinks bad. i will try to unistal cognitone and also maybe rewire i all ready did follow the link above (http://support.apple.com/kb/TS3968) but it did not help i will try to unistal cognitone ( by the way it is awesome programm ) such a sad story or maybe i just start from scratch .will post here on progress Thanks very much guys . -
how do I load an AU instrument (Garritan ARIA player) into Logic Pro X on a Mac Mini OSX 10.8.5 ?
You install the player .component in the Library/Audio/Plug Ins/Components folder (though an installer probably does that for you) and install(er) the sample content wherever you want, then you start Logic (the new plug in will be validated during startup), open or create a project, create/use a software instrument track, instantiate the player in an Instrument slot, and in the player itself you choose the sound(s) you want to play and load those.
-
How do I import a project from GarageBand into Logic Pro X?
Trying to imporrt all my projects from Garageband into Logic Pro X.
Open Logic X. Go to the help menu and select "logic pro help." Type garageband into the search bar. You will have one result to choose from.
-
How to import VEC1-3 packs into Logic Pro 9. help plz
Hello everyone, not sure if this has been answered (couldn't find nothing by searching) but i need help trying to import the VEC1,2,3 (Vengeance Essential Club sound pack) into logic pro. The samples/sounds/loops are all wav format.
any help would be appreciated. thank you!JSNP77 wrote:
i need help trying to import the VEC1,2,3 (Vengeance Essential Club sound pack) into logic pro. The samples/sounds/loops are all wav format.
There are "free download" EXS presets - look at the bottom of the [home page|http://www.vengeance-sound.com/eng/indexes/indexFreeSounds.html] "Vengeance EXS Presets" and download.
!http://img59.imageshack.us/img59/4967/aglogo45.gif! -
Hello, i have MainStage 2 and Logic Pro and want to upgrade.
Do I have to pay full price for both of them again?
Thanks!!Hi
If you want to get MainStage 3 and Logic Pro X, you have to buy them from the AppStore at full price.
CCT -
Unable to import wav sounds into Logic Pro X
I've been struggling with uploading all my sound kits into Logic Pro X. They are wav files. Every tutorial I watch has features that I don't have for some reason. Please help!
Hi
kcelik wrote:
Every tutorial I watch has features that I don't have for some reason.
Have you enabled all the Advanced Tools in the Logic Pro X;Preferences choices?
CCT -
can i open any new Garageband file
the latest of GB 6.0.5.
into LOGIC PRO
and does it fit nicely and easy
for those who have used it
thank you very much
glSimply take your GB project .... closed .... and drop it on the Logic image. Should open right up.
Peace ,
P. Dreadie -
Dropping beat into logic pro only puts 1 minute of a 3 minute beat help
Im taking a beat from iTunes and dropping it into logic pro x but the beat is 3 minutes long and logic pro will only take about 1 minute of the beat how do i stop it from cutting the beat that short
1) Yes.. Either you can reinstall from the DVDs you got as part of the Boxed set of Logic Studio 2/Logic Pro or.. if you purchased Logic Pro via the app store, download it again by going to the App Store app on your new Mac and going to the purchased tab which, after signing in using your Apple ID and password, will allow you to download Logic once more.
Note: In regards to the DVD boxed set... Some of the modern Macs no longer come with DVD/CD drives built in so you should make DMG images of your DVDs using your old Mac and the Disk utility... and store them on an external Hard Drive which you can then contact to your new Mac and install Logic from
2) You can select several regions at the same time and move them as you wish..
If you hold down the option key you will actually be able to make a copy of them and when you move them the originals will still be left in place..
See these pages of the User Guidel for more info
http://documentation.apple.com/en/logicpro/usermanual/#chapter=13%26section=13
http://documentation.apple.com/en/logicpro/usermanual/#chapter=13%26section=15
There are lots of other useful information about regions and tracks found in this main section of the User Guide
http://documentation.apple.com/en/logicpro/usermanual/#chapter=13%26section=0 -
Adobe Audition Into Logic Pro 7?
Do you know if there is a way to import adobe audition 2.0 files into Logic Pro 7? The reason I ask is beacsue someone wants me to work on a project for them and they recorded all their tracks for 5 songs in AA 2.0. I know garage band imports fine into Logic, but what about AA 2.0?
Any plugins out there?Nope... beyond Adobe and Apple not exactly being best buds... Audition is a PC only application (for now...Mac release slated for 07).
-
Ultrabeat in Logic Pro X is missing drum kits
Hi,
So recently, I got Logic Pro X because I've been meaning to try producing house music with it. I was introduced to Ultrabeat in some tutorials saying to click the dropdown menu (at the top) and select 01 drum kits and choose Trance Kit 02. However, when I click the dropdown menu, I seem to only have 8 samples in the drum kit and none of them sound good at all. Why do I have only 8? I've seen other discussions where people have up to 25+, is this something that I can download from the additonal content? And if so, what is it called?
Many Thanks!
MChen.Try Drum Machine
....and also the Logic Studio 2 Compatibility Sounds and Instruments found under the Legacy entry.... along with the GB 11 Sounds and instruments.. and finally the Instruments found under Jam pack 1, Jam Pack Remix and Jam Pack Rhythm,
Also make sure the Essential Sounds and Instruments set has downloaded completely too...
Personally, if you have the space, I'd download all the content... as there is so much on offer for free... that you may find useful in the future. -
Importing AAF files into Logic Pro 7.1
Hello All:
Have got a number of song sequences that are in the AAF format, complete with associated audio .aif sound files in the same folder.
These AAF files were created on another Logic pro studio, as they had to export them from Pro Tools into AAF .
i am able to IMPORT the sequence arrange with requisite tracks set up, but when the audio files attempt to load, i am prompted by the finder to MANUALLY locate each audio file to enable it to place into the Logic arrange page correctly.
I get the "where is the file"xxxxxB4Wrww.aif" type message, and can see the actual file located in the finder window, but it won't just locate them automatically.
It takes a loooong time to search out in the list each file and then click DONE to enter it!
Then repeat for EACH file name.....jeez.
One song has 78 audio files associated with it!
A local tech guy in a MAC software dealership said this was a continuing problem he had also with AAF in Logic 7.....
Any hints, before i spend 4 mind numbing hours hand-locating
these frikkin files?
Thank you in advance!sonidox wrote:
Hi All,
I've recently been having problems importing MP3 files into the arrange window. I thought I changed a setting and can't figure out what's up? Also I haven't been able to change my sampling rate to 48K or more. Mind you, I'm in transition right now moving to a different continent and my external drive is stored away so I'm playing and importing from my OS drive.Is that the issue??
Thanks,
Francisco
Hi Francisco.
Please re-post this as a NEW question. I just went over my last few posts, and here you are, and NO ONE has answered your question in three days. That is not usually the case in this forum.
Cheers
PS please give some details, what actually happens with the mp3 files? what is the actual problem? And also, what sound card / interface are you using?
Maybe you are looking for
-
Getting a coherent behaviour between two extensions of a bundle
Hi, I have two extensions in my bundle. The first (A) needs the second (B) OPEN in order to get datas. I have fixed the problem of communication with CSXSEvents. When the A is open, the B must be open too. But the B must evoluate by herself if the A
-
II'd like her to get a prompt to Ask Permission only. Most children can't remember complex passwords. Kids don't have any CC info so I don't see the need for a password prompt every time. It should be an option at least, since I'm sure some young kid
-
2 tables: CREATE TABLE Requirement reqID int IDENTITY(1,1) PRIMARY KEY, req_result_id numeric(10,0) NOT NULL, description varchar(200), heading varchar(100), GO INSERT INTO Requirement VALUES (5296,'Cold pack','HH19_5'); INSERT INTO Requirement
-
CS6 no longer saves JPEGs as .JPG
Every time I attempt to save output as JPEG, CS6 is substitutes the .eps format and puts up the EPS options dialog. Has anyone seen this before? What is going on and how can I fix this?
-
Hallo, zum Vertonen meiner Super 8 Filme benutze ich Adobe Audion 2.0 seit Jahren mit dem portabelen USB-Audio-Interface EMI 2/6 von emagic mit großem Erfolg. Nun steht der Wechsel von Windows XP zu Windows 8. Gerne würde ich Adobe Audition auch mit