Mainstage2 Compatability With Audio/ MIDI Interfaces and Lion?

I've recently upgraded to a new laptop with Lion and my old interface is no longer supported.
Can anyone suggest a small unit that will work with Mainstage2?
I bought the Scarrlet and it works with Logic but not Mainstage2.
Thanks!

ClayG wrote:
I don't think you should be touching the Audio/MIDI setup utility at all if you're just trying to listen to music. Those settings are there for those who do audio recording/MIDI work on their computers.
not true...
I use an external DAC connected through the digital output of the Mac Book Pro...Then, in order to play the music at the correct sample rate I DO have to change the setting in the audio/midi setup if using iTunes as a player.(before even open iTunes)
Amarra is a much better player than iTunes and it change the sample rate by itself without having to do it manually. But the issue remains, I just can not choose 88.2 KHz....
Any other ideas?

Similar Messages

Edirol Audio/Midi Interface and Yamaha Keyboard

Hi everybody,
I just got an Edirol Audio/Midi interface UA-20, installed correctly with latest drivers, garage band recognizes it. Now I want to connect my old Yamaha PSR SQ16 keyboard through it, but somehow it doesn't work. Can anybody please give me a guidance on how to connect it properly, maybe i'm too dumb for that...
Thanks for any help!

I'm shure you must have already figured this out, becouse it's very simple thing to do, but I'll post my answer anyway, perhaps someone else has the same problem.
The Yamaha PSR SQ16 has a "MIDI OUT" plug, in the back of the sinthetizer. To connect with de UA20 Edirol, all you need to do is to get a midi cable (you can find it in every music store) and plug the Yamaha PSR SQ16 MIDI OUT to the Edirol UA20 MIDI IN.
And boy, that's it.
All the fantastic sounds and samples that cames with Garageband, are now triggerd through your Yamaha PSR SQ16.
Things to check: in the AUDIO MIDI UTILITY, be shure that the UA20 is set as de midi in out device.
In Preferences of Garageband, be shure to check that the UA20 is set as audio and midi interface.
Hope this be helpfull.
I apologise for my english, it isn't my first language.
Saludos

Annoyance with Audio Midi Setup and ports in Logic

Hi all,
Just wondering if anyone else is annoyed with the way midi ports are addressed in Logic, in relation to Midi control of various commands in Logic.
A simple case in point for me is when I have my Virus TI turned on, I have one set up of logic_cs preferences and another for when my Virus TI is turned off. The only around this is to double up on the settings within the controller assignments window.
So you buy a new piece of external midi kit and all of a sudden all your previously setup controllers stop working..... So you have to re-enter them all again one by one.
Sometimes adding or removing a device, doesn't affect it at all... Just depends on the order of the ports on the physical input (in the environment).
If you could rename the ports in the Audio Midi Setup and change the order in which they appear, you might have some control over the random nature of the problem.
Has anyone else run into this, or am I the only bothering with it?
Matt

It's a well documented and long outdated situation.
See this thread.
http://discussions.apple.com/thread.jspa?threadID=1951148&tstart=15
pancenter-

Audio/midi interface compatibility with Logic Express Mac osx 10.6.5

hi all, I'm looking for a compatible audio/midi interface to use with the latest mac os. I recently purchased a Ediroll UA25 but was unable to get it working . I installed the latest drivers from the Roland site but when plugged in it just wasn't being recognised. I sent it back and got a full refund but now I am insure if the Ediroll was faulty or if it wasn't compatible with os 10.6.5. I am now in the process of looking to purchase another interface but am looking for help from you guys.
Thanks in advance,
kiev

Hi,
just out of curiousity: did you use the UA-25 or the UA-25EX? I know the 25EX has a driver switch on it's back where you can enable a standard driver which should be compatible to OS X without an additional driver.
However, i didn't find another interface including a compressor except for the Yamaha Audiogram 6, if you need this feature.
If you don't need it, buy a MOTU, preferably with firewire, or a Presonus. If you want quality, maybe an Apogee Duet. I myself - due to shortage of funds - still use either my Tascam Fireone or my Alesis I/O 2. The Alesis sounds nice for it's price, but i won't buy any of these lower end interfaces anymore. You get what you pay for. I also used the Edirol UA-25EX for a time, but this was before snow leopard, so i can't really say "Yes or No", but it was definitely a very good interface compared to it's price. I won't recommend M-Audio, however, but others like it.
Fox

Audio/MIDI Interface Compatibility with Logic Pro 7.2

Hello,
Is/are there a recommended audio/midi interface(s) that will work without audio/midi timing glitches with Logic Pro 7.2? Currently, I am using Pro Tools LE v7.1, along with the DIGI002 Rack. That combination works very well, with no glitches whatsover. The possibility of using Logic Pro 7.2 raises the question of what would be a compatible interface. I don't think the DIGI002 Rack has the necessary drivers, although I may be mistaken. However, there must be an interface that works well with Logic Pro 7.2.
Any help or advice would be much appreciated.
Thank you,
TonyVT
iMac Intel Dual Core Mac OS X (10.4.6)

Hello,
I went to the Metric Halo Web site and was not able to find the interface that you may have been referring to. It looks like the Mobile I/O may be the correct one, however, that interface is much more than I would want to spend (http://www.mhlabs.com/metric_halo/products/mio/)
The price seems to be @ $1200. Anyway, I am somewhat confused regarding the Metric Halo.
Any additional advice/help would be appreciated.
Thank you,
Tony Ventura
www.tonyventura.com
iMac Intel Dual Core Mac OS X (10.4.6)

Audio/midi interface for macbook pro with OSX 10.7.4?

I have been running Sibelius and GarageBand with my keyboard and sometimes vocals in my imac with OSX 10.6 via an old Tascam US-122 interface. I now have a new MacBook Pro with OSX 10.7.4, and am set up to run Sibelius and Logic Pro 9, but I can't seem to find a compatible audio/midi interface. There is plenty of discussion on M-Audio's site, but as of May '12, still incompatible. Ideas? Thanks. John

Yeah, the new MacBooks are USB3 i.e. you have to be careful which interface you use as some of them don't work yet.
Personally I have a NI Tracktor control 2 for live work ( works with USB 3 but no midi ) and a Focusrite Saffire for recording. My Saffire however is Firewire.
I do know that the Focusrite Saffire 6 is now working on USB 3 though. http://us.focusrite.com/usb-audio-interfaces/saffire-6-usb + it works with Mountain Lion.
Sadly though it's still a backward compatible USB 2 inteface, but... if you're only recording Guitar and vox, this really won't matter to be honest.
Also I'd recommend Focusrite over M-Audio gear any day of the week.

What audio/midi interface works with new iMac 2014

What audio/midi interface works with new iMac 2014. new imac only has USB3 and Thunderbolt.

Thanks for the info.
I have two MOTU 8pre's would these work with the Thunderbolt to Firewire adaptor?

Mobile usb audio/midi interface with preamps isn't working with GB

I have a M-audio mobile usb audio/midi interface with preamps and fastTrack Pro software that i'm having trouble using with garage band.. I just got this Mac os x 10.4.10 and i'm unfamiliar with GB and how to get a audio signal to register from my mic through the mobile usb audio/midi interface to GB.
any suggestions??

http://www.bulletsandbones.com/GB/GBFAQ.html#selectinterface ??

Can Anyone suggest and audio/midi interface for MacBook Logic Express?

Can anyone suggest an audio/midi interface for use with a MacBook and Logic Express? I'm seeing a lot of problems with Tascam devices; does anyone have an interface that actually works well? Two audio inputs and midi i/o would suit my current needs, but more would be fine if it works.
Thanks!

Any of the Pro-Tool Mboxs will work with Logic Express. Kind of an unadvertised feature. But I have an original M-box with very nice Focusrite Preamps that works like a charm. No midi though.. some of the newer M-boxes have them.
Also, I have a Presonus Firebox and I know they make some smaller interfaces. No problems working with those.
M-audio Makes some great interfaces too. Their Fast Track pro would probably have everything you need for under $200.

Does anyone know of a good A3 photo scanner compatable with OS 10.8 mountain lion? I need it to scan watercolour artwork. I was interested in Microtek scanmaker 9800XL and also Epson Expression 10000 but neither are compatible. Thanks :-)

Does anyone know of a good A3 photo scanner compatable with OS 10.8 mountain lion? I need it to scan watercolour artwork. I was interested in Microtek scanmaker 9800XL and also Epson Expression 10000 but neither are compatible. Thanks :-)

Daniel Craigie-
How full is the hard drive that you are trying to save to? Not that it should matter, but have you tried scanning another document?
Is the scanner plugged directly into the Mac? Try it that way.
Disconnect all peripherals except keyboard, monitor, mouse and scanner and see if the problem goes away.
Luck-
-DaddyPaycheck

Problem with Audio MIDI Setup using multiple accounts

I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

Audio/midi interface, FW800 enclosure, nearfield monitors for MacBook Pro?

I'm running Logic 9 on my MacBook Pro, having switched over completely to a laptop based solution from my previous Mac Pro.
My previous audio/midi interface was a Digidesign FW400 MBox, but I want to switch to a USB audio/midi interface plus an external FW800 enclosure as my recording drive.
I am also looking to replace my aging Roland nearfield monitors with something smaller. I mostly run soft synths and plug-ins (I have an old UAD-2 PCI and am trying to crossgrade to the ExpressCard solution too).
And I'm running Snow Leopard.
S0 my questions are these:
1) What would be a good USB2 audio/midi interface. I only need 1 x 1 for the midi (but 2 x 2 would be nice), plus XLR and 1/4 audio ins and both analog and digital outs. Decent Mac drivers a must!
2) Any recommendations for very small but decent quality nearfield monitors? I like the Genelec's, but for whatever reason they only appear to have XLR ins. SPDIF or 1/4 analog ins would be cool -- anything compatible with 1) above.
3) What is a good recommendation for a FW800 enclosure? Obviously looking for something quiet. My only audio in would be vocals, and they'd be recorded in the same room as the drives. There are some fanless options out there, but upon enquiry I've been advised I'd have to shut them down every four hours or so. I do have an old FW800 OWC twin drive enclosure, but despite the 'whisper quiet' claims, that thing sounds like a taxiing Learjet.
Thanks in advance for any thoughts or recommendations!

'Perfect' rather depends on what you want to do with it - microphone input? Level meter? Just a simple A-D converter? digital inputs?
I've used an earlier version of this device for some years with no problems (no MIDI though):
http://www.rolandus.com/products/productdetails.php?ProductId=758&ParentId=104
Other interfaces by Roland: http://www.rolandus.com/products/productlist.php?ParentId=104 - Edirol (taken over by roland) used to make MIDI interfaces as well but Roland don't seem to.
This page lists interfaces by several manufacturers:
http://www.bulletsandbones.com/GB/FAQPages/Interfaces.html

BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network

I'm trying to create an "ExtraLarge" VM with multiple NICs. The New-AzureVM returns the following error:
BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network
interfaces are not supported in the same deployment, also a virtual machine having no secondary network interfaces
cannot be updated to have secondary network interfaces and vice-versa.
But I have no other VMs. Or at least I did and then deleted them and all their disks. The service has no deployments (either staging or production).
Why is New-AzureVM complaining about a mismatch of VMs with and without secondary network interfaces when no other VMs exist?
I have tried many things to fix this, including the deletion of ALL of my resources. I have deleted and created the service many times, both with an affinity group and without. I have a screen print of the -debug output if your interested.
Thanks for the outstanding help.

Hi Ron,
IMPORTANT NOTE: Please do not post the CONFIDENTIAL DETAILS ever on the public forums, this is HIGH RISK action.
Please send an email with your contact details to my email
[email protected] so that I guide you on steps which help you come out of the current scenario. Thank you for understanding.
I suggest you to create a new VNET and new VM with cloud services. Create Multiple NIC VM. Let us know the results.
Ref:
http://azure.microsoft.com/blog/2014/10/30/multiple-vm-nics-and-network-virtual-appliances-in-azure/
http://blogs.technet.com/b/canitpro/archive/2014/11/04/step-by-step-create-a-vm-with-multiple-nics-in-azure.aspx
If you are unable to create a VM with multiple NIC, please open a support case as it requires more confidential information which is out of scope of FORUM support offerings.
Regards,
Girish

M-Audio USB MIDIsport 2x2 MIDI Interface and macbook pro

i just got a m-Audio USB MIDIsport 2x2 MIDI Interface on ebay, but I can not find drivers so that it will be able to run on my macbook pro (which is obviosly Intel).However, there is one driver that can support it but its for firewire, which dose not make any sence because it is a usb controler.
here is a link to the driver list
http://www.m-audio.com/index.php?do=support.drivers
please help thanks

You must have missed it.
http://www.m-audio.com/index.php?do=support.drivers&k=driver&s=4&p=f808e3999ca85 171bc6c92b8be1d6e2f&o=41&f=676
offers support for both PPC and Intel Macs.
I use it all the time when I travel. Cool and uncomplicated device.
Best,
sonther

Windows 7 Compatability with Labview 8.0 and missing files while interfacing the FPGA with LV

I am trying to use an FPGA (PCI-7830R) with Labview 8.0. The computer has Windows 7 OS. I installed LV 8.0 in the proper order with the FPGA Module and labview is able to see the FPGA when I open a .lvproj (the FPGA is in the tree) however there is a warning symbol next to the FPGA selection and when I try to open a .vi file that is used on the other stations in my lab (it works on all the other stations), labview is unable to find a whole bunch of files. There are some pictures.
Missing File (there are a bunch more but this is the fist one).

According to this LabVIEW Compatibility LabVIEW 8.0 is NOT compatible with Windows 7
Visualize the Solution
CLA
LabVIEW, LabVIEW FPGA

Mainstage2 Compatability With Audio/ MIDI Interfaces and Lion?

Similar Messages

Maybe you are looking for