Maint order should get TECO automatically after final Confirmation

Hi Gurus,
My customer requirement is that, Maint order should get TECO automatically after final Confirmation (in IW41) of last operation. Is it possible? If yes, plz let me know the steps which I need to do.
Thanks in Advanceu2026
Amol.

Hi,
This functionality is not available in std. SAP. You may go for enhancement. please check the following user exits for achieving your requirement. 
CONFPM05 PM/SM order conf.: Cust. specific enhancements when saving
IWO10009 PM Order: Customer Check for 'Save' Event
Praveen

Similar Messages

  • Production order status was not changed to 'CNF' after final confirmation.

    Hi guru.
    I experienced very special case that production order status was not changed to CNF after final confirmation.
    I did final confirmation and canceled confirmation. (CNF -> REL)
    And I did final confirmation again because of fixing activity quantity.
    the strange thing is that production order status wasn't changed from REL to CNF.
    I did  confirmation again with 0 activity, thereby  I solved this problem
    BUT i don't know why this case happened.
    Please, explain the reason.
    Thanks.

    Hi,
    As per my observation, their is not any change in the status of the order REL with confirmation CNF, instead of this, it has change from CRTD & then to TECO.
       Sequence of the status of the order as below
    1) CRTD MANC NMAT SETC
    2) REL  NMAT SETC - Changes from CRTD to REL after releasing of the order
    3) REL  CNF  PRC  CSER ERTR OPGN SETC -  After confirmation, it updated after the order REL status.
    Rgd,
    Chetan

  • Sales order should get block if XYZ payment terms is used

    Dear Expert,
    The requirement is like,
    If user add payment term XYZ  manually in salse order then that sales order should get block for review purpose.
    Note:
    if user add that payment term in sales order client want that order should block no matter what reason ,  here client not concern about credit limit and any outstanding from customer side ,
    Thanks in advance
    hanumant

    Hi,
    You need to block orders with payment terms XYZ, or only when user changes from ABC to XYZ??
    If first one is your requirment, you can do with userexit - USEREXIT_SAVE_DOCUMENT, and you need to create status profile for sales document type and assign to order type, in status profile put status AUTO - automatically approved, LOCK - when XYZ is payments terms it wil not and not create delivery & REJC- Rejected, when approver dont want to approve he can reject.
    In sales order userexit you need write logic when paytemnt terms is XYZ then put status as LOCK.
    New repor need to create to approve LOCKed orders so that user execute and approves or rejects.
    If only user change to XYZ, then you need to write logic in prepare userexit, but it will be tricy, need to store values in tempapory memory, ceck with abaper,

  • Emails get deleted automatically after 2 weeks

    My emails are getting deleted automatically after 2 weeks. I have important emails that I cannot retrieve. I changed setting to never delete but it keeps deleting. Also I called about the issue and It was never fixed. I cannot be loosing emails. Especially that this is an email address that everyone knows for me.

    Do you have the account enabled on more than one device or computer?  If so, the retention settings on that other device will override the settings in Comcast preferences.

  • WBS Forecast dates disappears during scheduling after final confirmation

    Hi dear Experts.I faced a problem with WBS dates.
    The system overwrites forecast and basic dates on WBS after final confirmation of attached activities. And start to schedule wbs dates from dates of activities with no confirmation. Is there any way to solve this prolem?
    In other words i need my WBS to take into scheduling ALL the operations forecast date. Moreover how the system can overwrite the forecast dates wich were entered manually by user?
    Green - actual dates
    Yellow (orange) - forecast dates
    Bue - Basic dates
    Please help.

    Hi Kirill,
    Please check the control parameters for WBS Scheduling. Check if the scheduling method over here is WBS Determines Dates. If this is the case, irrespective of the scheduling that was carried out at the activity level, the system overwrites the basic and forecast dates present at the WBS level. May be in your case the scheduling method that had been used was "Network determines dates".
    . Please change this and let me know if this helps.
    Regards
    Varun

  • Preventing additional component consumption after final confirm in PM Order

    Hi,
    I am trying to block the consumption of additional components after the final confirmation in a PM order, this is causing erroneous component consp. especially in orders with multiple operations.
    The user may choose a confirmed operation while recording a component, system gives an error but it does not prevent the recording of that component, I want the users to get an error and stop there in such a case.
    I hope I made myself clear, thanks in advance
    IW32 Screen: https://picasaweb.google.com/koray.tulumen/Paylasacaklarim#5707123654338971234

    OK once more I thought I should add screens to better tell what I was trying to ask, I could not do that with the old forum layout. Anyways, could I get that result (in the screens) thru customization. There have been other comments relying on Orders' user statuses but with multiple operations they are not usable, every operation is confirmed individually and order status does either let or deny material movements thru the whole order (all operations)
    Here are the screens, thanks again.

  • Anything that I copy on my desktop gets deleted automatically after a few seconds. Any idea what is going on ?

    I have a problem with my MBP.
    One day something weird started happening. Every time I would copy / save / download something on my desktop it got deleted automatically after a few seconds. On very very rare occasions this would not happen.
    This has been going on for 3 months now and I haven't found any sollution. The last option is to format and reinstall Lion but I hope there is a faster/better solution than that.
    I have a 2011 15-inch MBP with the up-to-date Mac OS X Lion.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
    Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search. A text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag -- do not type -- the line below into the Terminal window, then press return:
    kextstat -kl | awk ' !/com\.apple/ { print $6 $7 } '
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Step 3
    launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
    Step 4
    ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
    Remember, steps 1-4 are all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
    You can then quit Terminal.

  • MS-SQL Template is getting assigned automatically after System Reboot.

    Greetings, We have currently unassigned templates for MS-SQL Servers in Solution Manager Technical Monitoring for all technical systems as we don't want to monitor the DB Alerts. However, What we see is that after every OS reboot or DB Connectivity failure, for few technical systems the MS-SQL template is getting assigned automatically. If not assigned, it will start referring to SAP original template for metrics. I was unable to find any SAP note to fix this issue. Is there anything we could do to stop this? Please let me know if there is anything we could try.. Thank you, Haseeb Ahmed.

    Hi,
    I tested and noticed that the following registry key will be changed when modify paging file size:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management
    value name:PagingFiles
    Please change the paging file size again and check if the key is edited correctly. Reboot and see if the value is changed back to empty. 
    If issue still exists, please let us know if there is any third party app installed on server such as antivirus program, disk management program etc. I saw similar issues caused by third party application.
    If you have any feedback on our support, please send to [email protected]

  • Why SO Header not get closed automatically after all SO lines get closed?

    Hi all :
    Do you know the reason, why some SO Header still as Booked Status, even All the SO lines are already closed ?
    If I see the Workflow status the SO Header is in Status = Deferred and Activity = Wait
    And I can close it manually if I rewind the Activity in the Workflow, but I want to know why the SOs not get closed automatically.
    Thank you in advance
    Edited by: Daniel on Jan 18, 2011 8:41 AM

    Have you scheduled the concurrent request to use Workflow Background Processor to Process OEOH ? What is the frequency? Has it run after the lines got closed?
    Also, check the value of the WAIT attribute in the OEOH workflow? By default, it is set to close headers at the end of month.
    For more detail please see Note:141919.1 on Metalink.
    Also refer to metalink document # 397364.1 which details how to change the WAIT attributes.
    Hope this helps,
    Sandeep Gandhi

  • Reg:WBS TECO only after activity confirmation

    Hi,
    Can anybody suggest how to maintain some constraint in project Such that system will allow  WBS TECO only after all activity in that particular WBS will be confirmed.
    With Regards
    Rohit Prakash

    Hi,
    Try maintaining a User Status on the WBS that prohibits the business transaction TECO. That should definitely help you.
    Regards,
    Gokul

  • ATP Tree Structure is not getting created automatically after Sales Order is saved

    In one one of our scenario, when we add material to Sales Order and save with Requirement Type(under Procurrement Tab of Sales Order) , in APO there is no planned order or only planned order which is dynamically pegged created because the ATP Tree in APO is not being converted. There is no pegging relevant item create(e.g. Planned Order). When we are checking the persistent ATP Trees in APO (/SAPAPO/ATREE_DSP - ATP-Trees) we can see that they are not converted automatically. They are still there. If we do it manually via transaction (/SAPAPO/RRP_ATP2PPDS - Conversion ATP Tree Structures -> Production Planning) it works. Afterwards the Planned Order is available and fixed pegged.
    Why is APO not converting the ATP tree automatically ?
    I also checked the scheduling horizon for conversion of the ATP Tree and it is correct: Is there any relation with Check Mode setting under ATP tab in Material Master?

    Hi Prasad ,
    This enables you to debug the ATP tree . If you have created an entry here with your user name then it will not let ATP tree get converted into PP/DS orders automatically .
    It's very surprising because all  seems fine . Just cross check all the settings once with below .
    The conversion time depends on the following horizons and dates:
    ·  PP/DS Horizon
    ·  Scheduling horizon for the conversion of ATP tree structures
    ·  Requirements dates in the ATP tree structure
    PP/DS immediately converts the ATP tree structure when the sales order is saved
    ·  If the earliest requirements date for components is within the scheduling horizon or
    ·  If the latest requirements date for finished products is within the PP/DS horizon
    If none of these conditions are fulfilled when saving the sales order, the system saves the ATP tree structure in SAP APO. In this case you can only convert the ATP tree structure online or in the background when one of the conditions given above is fulfilled. Here, there is an offset for the horizons with which you can achieve an earlier conversion.
    You maintain the scheduling horizon for the conversion of ATP tree structures in Customizing for Production Planning and Detailed Scheduling under Maintain Global Parameters and Defaults. You maintain a location product specific PP/DS horizon in the location product master. If no location product specific PP/DS horizon exists, the system uses the PP/DS horizon from the planning version. You maintain these in Model and Planning Version Management.
    Love Singh

  • Purchase Order Cost Getting Changes Automatically

    Hi All,
            We have developed an application which works as a bridge between two applications and we are taking data from other application and transferring the same to SAP B 1 using DI API provided by SAP we are having 2007 PL10 and we are facing the problem in some purchase orders as while transferring the date we have provided one rate say 24 to DI API and it gets saved in SAP as 30 (In Item master we have provided some price lists as Rs. 30) and 20% in discount column, final amount comes 24 but while making GRN's we are providing base entry no only and we are not providing any rate or discount at that and GRN get's punched with Rate as 30 and it is creating mess with data, and strange thing is this is happening rarely i.e. once in 1000 transactions or so. Can someone help me in this.
    Thanks ,

    HI,
    Check if you have defined special prices for the vendors/customers ?
    Noor

  • Transfer order not getting created automatically for a backflushed FERT

    Hi,
    I am having a strange problem. in my business process the WM system is set in such a way that the when a production order is confirmed automatic goods receipt  for the  FERT is done. which will automatically create a transfer requirement and convert the TR in to TO automatically and TO will be confirmed automatically.
    the issue its not happening so.
    when I confirm a production order its creating a TR instead of creating TR --> TO --> TO confirmation.
    I tried doing manual goods receipt for the production ordeer and the process worked perfectly.
    this process is not working for only one plant. and in another plant when i confirm a production order its creating a TR automatically and then tr is getting converted in to TO automatically and TO is getting confirmed automatically.
    I checked all configuration and its all same for both plants.

    Maintain a storage location in your delivery.

  • AP Admin Status Getting Disabled Automatically After Upgrade to 7.4

    Hi,
    We were using wlan controller 5508 firmware 7.0.235 and decided to upgrade our firmware because we wanted to use some new AP models. We upgraded the controller to the 7.4.110.0 and after that a problem started. Some of the AP are becoming ADMIN DISABLED and they are getting down, this is happening all day and random times. I need to manually getting them admin enabled so we can use them. What can cause this problem?
    This happens in APs in Flexconnect mode.
    Regards.
    Wlan Cont
    AIR-CT5508-K9

    Problem happens with these AP : AIR-LAP1041N-E-K9 
    We have many AP it is very difficult which AP to debug, everytime different AP is getting disabled. I've also configured syslog but also I do not receive any syslog message to my syslog server. Should I upgrade to 7.5?
    Log from AP after disabled...
        Console logging: level debugging, 39 messages logged, xml disabled,
                         filtering disabled
        Monitor logging: level debugging, 0 messages logged, xml disabled,
                         filtering disabled
        Buffer logging:  level debugging, 39 messages logged, xml disabled,
                        filtering disabled
        Exception Logging: size (4096 bytes)
        Count and timestamp logging messages: disabled
        Persistent logging: disabled
        Trap logging: level emergencies, 12 message lines logged
            Logging to 10.0.2.47  (udp port 514, audit disabled,
                  link down),
                  0 message lines logged,
                  0 message lines rate-limited,
                  0 message lines dropped-by-MD,
                  xml disabled, sequence number disabled
                  filtering disabled
            Logging Source-Interface:       VRF Name:
    Log Buffer (1048576 bytes):
    *Mar  1 00:00:10.770: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
    *Mar  1 00:00:10.773: *** CRASH_LOG = YES
    *Mar  1 00:00:11.073: Port 1 is not presentSecurity Core found.
    Base Ethernet MAC address: D8:67:D9:FC:00:D6
    *Mar  1 00:00:12.424: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
    *Mar  1 00:00:13.507: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
    *Mar  1 00:00:14.518: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
    *Mar  1 00:00:16.503: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C1040 Software (C1140-K9W8-M), Version 15.2(2)JB2, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Compiled Mon 29-Jul-13 12:06 by prod_rel_team
    *Mar  1 00:00:16.503: %SNMP-5-COLDSTART: SNMP agent on host Antalya is undergoing a cold start
    *Mar  1 00:00:16.570: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar  1 00:00:17.567: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
    *Mar  1 00:00:28.630: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
    *Mar  1 00:00:28.632: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
    *Mar  1 00:00:28.633: bsnInitRcbSlot: slot 1 has NO radio
    *Mar  1 00:00:28.657: %CAPWAP-3-ERRORLOG: Binding Config Initialization failed for binding 1
    *Mar  1 00:00:29.190: Starting Ethernet promiscuous mode
    *Mar  1 00:00:29.396: %SSH-5-ENABLED: SSH 2.0 has been enabledlwapp_crypto_init: MIC Present and Parsed Successfully
    *Mar  1 00:00:44.681: Logging LWAPP message to 10.0.2.47.
    *Mar  1 00:01:03.711: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
    *Mar  1 00:01:13.713: %CAPWAP-3-ERRORLOG: Selected MWAR 'COLINS-WLC'(index 0).
    *Mar  1 00:01:13.713: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Aug 21 08:32:29.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.10.10.10 peer_port: 5246
    *Aug 21 08:32:30.063: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.10.10.10 peer_port: 5246
    *Aug 21 08:32:30.063: %CAPWAP-5-SENDJOIN: sending Join Request to 10.10.10.10
    *Aug 21 08:32:35.063: %CAPWAP-5-SENDJOIN: sending Join Request to 10.10.10.10
    *Aug 21 08:32:35.154: Starting Ethernet promiscuous mode
    *Aug 21 08:32:37.005: %LWAPP-4-CLIENTEVENTLOG: OfficeExtend Localssid saved in AP flash
    *Aug 21 08:32:37.025: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Aug 21 08:32:37.224: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller COLINS-WLC
    *Aug 21 08:32:37.273: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file
    *Aug 21 08:32:37.275: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file
    *Aug 21 08:32:37.275: %LWAPP-4-CLIENTEVENTLOG: No LS Flex ACL map configuration file to load. Connect to controller to get configuration file
    *Aug 21 08:32:37.276: %LWAPP-4-CLIENTEVENTLOG: No Central Dhcp map configuration file to load. Connect to controller to get configuration file
    *Aug 21 08:32:37.279: ac_first_hop_mac - IP:192.168.31.1 Hop IP:192.168.31.1 IDB:BVI1
    *Aug 21 08:32:37.279: Setting AC first hop MAC: 0024.14d9.f118
    *Aug 21 08:32:37.965: %WIDS-6-ENABLED: IDS Signature is loaded and enabled
    *Aug 21 08:32:47.905: %CDP_PD-4-POWER_OK: Full power - LOW_POWER_CLASSIC_NO_INJECTOR_CONFIGURED inline power source

  • Capped zones not getting discovered automatically after global zone discovr

    On solaris 10.
    We have global zones with capped and uncapped zones.
    Zones which are uncapped getting discovered under global zone.
    But zones which are capped are not getting discovered.
    As per all documents:http://docs.oracle.com/cd/E27363_01/doc.121/e27511/ftr_zones_mgmt.htm
    All the non-global zones in the selected global zone are automatically discovered
    Edited by: vtadmin on Aug 25, 2012 9:46 PM

    The most common reason this usually occurs is because the of the shared memory issue with the Sun MC database. Looks like this issue has been passed on to 4.0. Please try doing the following:
    When installing a Server in a whole-root Zone, edit /etc/project to set the shared memory setting first.
    Change the "default:3:::" entry to look like this:
    default:3::::project.max-shm-memory=(privileged,1073741824,deny)
    ...where 1073741824 indicates a 1GB setting (you may tune it lower). For more details, go here:
    http://docs.sun.com/app/docs/doc/819-5418/6n7gk6ilo?a=view
    Mostly this is a problem in whole root zones, but sometimes also applies to the global zones.

Maybe you are looking for