Maintain apportionment structure and equivalense number
Hi All
How to maintain apportionment structure in material master in MRP 2 view then joint production button if there's 2 material code as co-product and 1 main product but during production run ratio is 1:1 meaning 1 main product and 1 co-product only.
Scenario:
Main product 4400014
Co Product(s) 4400006
4400197
Equivalent Number for 4400014 is 36 and 4400006 64
4400014 is 46 and 4400197 54
Please help.
Thanks
Jesielle
Already found solution for this.
Similar Messages
-
Maintain the telephone and fax number of vendor in Purchase order document
Dear Expert,
Hi, i'm wondering here.. why when I create purchase order , and enter the vendor in vendor field, the telephone and fax field in PO header - address tab is not automatically appears, only the street/ house number , postal code and so forth appear?
I have checked in vendor master, all the communication info are maintained (telephone, fax, email)
You can give me any idea about this?
Thanks
PaulineHi Nick,
Do you mean the Purchasing Organisation comms in the vendor master data ? Yes I have maintained.
actually the field in vendor master and the field in purchase order have the same name SZA1_D0100-TEL_NUMBER why it is not link to each other?
Thanks
Pauline -
How to get STPOV structure values using BOM number and Plant number
hello All,
could you please help me out
'How to get STPOV structure values using BOM number and Plant number'
is there any function module where can i give input as bom and plant number .
waiting for your response.
regards
srinivasI did a quick where-used lookup in SE11 on the structure STPOV in function module interfaces and came up with the following:
Function Module Short Description
CK_F_TOTALCOST_COMPUTE
CS_ALT_SELECT_COUPLED_PRODUCT
CS_WHERE_USED_CLA Bills of material; class use
CS_WHERE_USED_CLA_ANY Bills of material; direct class use or via other class
CS_WHERE_USED_CLA_VIA_CLA Bills of material; class use via classes
CS_WHERE_USED_COP
CS_WHERE_USED_DOC Bills of material; document use
CS_WHERE_USED_DOC_ANY:Bills of material; direct and (indirectly) document use via
CS_WHERE_USED_DOC_VIA_CLA Bills of material; document use via classes
CS_WHERE_USED_KNO Bills of material; use object dependency
CS_WHERE_USED_MAT Bills of material; where-used list
CS_WHERE_USED_MAT_ANY:Bills of material; where-used list as article or class item
CS_WHERE_USED_MAT_VIA_CLA Bills of material; where-used list via classes
EXIT_SAPMC29M_001 BOM; Article Where-Used List
It appears that this structure is primarily used for where-used look-ups for components within the BOM. I don't know if any of these are what you're in need of.
Hope this helps,
Mark Schwendinger -
Explain me whole landscape in sap and request number structure?
Hi , I want to know the landscape of comapny and request number structure,,,,thanqking u
Hi , I want to know the landscape of comapny and request number structure,,,,thanqking u
-
Maintain Field Mapping and Conversion Rules//LSMW
Hello Friends,
I want to add new fields in the step.no.5(Maintain Field Mapping and Conversion Rules).
Indetail i'm going to upload the GL balances, for DR and CR line item fields are same so system is not accepting the same field value, so i have added 1 for the CR line item fields like in the below example.
BSEG-WRBTR(Dr line item)
BSEG-WRBTR1(Cr line item)
but BSEG-WRBTR1(Cr line item) field not displaying in the step.no.5 to mapping to source field.
please let me know the solution for this.
thanks
swapna.Hi,
I would like to ask few questions.
1. Are you using batch input recording or using any program for uploading. (through LSMW)
2. Whether all your debit or credit line items are same every transactions. I believe they should be same, because you are uploading the balances.
You should not have two similar fields for example, if it is WMBTR, then again WMBTR should not be there, it should WMBTR1 and WMBTR2. Make sure you have done the field mapping properly. When you have done the field mapping all the fileds must have been mapped. If any one of the fields are not mapped, then it will not be uploaded.
Please see the following LSMW sample guide:
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Maintain Object Attributes Do the recording - Make sure that you do not have two fields with the similar name. If you have two fields with the same name double click on the field name and add1 or 2 to differentiate between field names. Just Copy those fields and descriptions in excel sheet, delete the blank lines, then in excel data => text to columns, your field names and descriptions will be now in two columns. Copy them, then put your cursor on the next sheet, then edit => Paste Special => Transpose, all the columns will become your rows. Now your file structure is ready. Maintain Source Structures Give some unique structure name and description Maintain Source Fields Here you add the fields that are being used in EXCEL first sheet, just copy them and make all the fields as C (Constant) and then give length of 60 for all fields. Maintain Structure Relations Though structure relations are already created just go to this step, click on edit, then click on create structure relation, just accept the message stating that the structure relation has already been created. Maintain Field Mapping and Conversion Rules Do the field mapping for all the fields, all the fields willl be stretched and you will see five rows against each row. In case if there is any row that has NOT stretched means, there is something wrong in the mapping. Maintain Fixed Values, Translations, User-Defined Routines There is nothing to be done at this step. You can simply ignore this. Specify Files Make you must have saved your excel file as .txt (before saving make sure you have copied data from sheet2 to sheet 3 and then sheet 3 is saved at tab delimited file. Text (Tab delimited) Select your file, make SURE that you have select "TABULATOR" radio button and say OK. Assign Files Go to this step and click on Create assignment button and accept the message and say ok. Read Data Remove two check boxes and just click on execute button. See the log. Make sure you have number of entries (lines) in your excel file are matching with this. Display Read Data Display data give 1 to 999 lines and double click on one of the line and see whether fields are mapped correctly are not. Convert Data Execute and see the log match the number of entries. Display Converted Data Display converted data, give 1 to 999 and double click on one of the line and see whether fields are mapped correctly or not. Create Batch Input Session Check on Keep Batch Input sessions check box, then execute. If you select that check box, even after execution it will be there and you can analyze what happened. Run Batch Input Session (Takes you to SM35) Go to SM35 select the batch and click on process button (execute), make sure you have checked right hand side first three check boxes and FOREGROUND (because you want to save what it is creating) Say OK Keep on press ENTER on your key board in order to move the session further. If you follow these steps along with the guide, surely you should be successful. There may be small difference between the file and what I have explained but ultimately the purpose is same. Hope this is useful and let me know in case if you have any issues.
Regards, Ravi -
Cost-apportionment structure using co-products
Hello
We want to use co-products in our production process.
Im not sure how to define the cost-apportionment structure in the header material. I need to define 95% - 5% apportionment structure for two co-products in a Production order
I mark flag "co-products" in the principal material, then press boton "joint production"
I enter the following data:
Number 001 - Descripcion -Source structure (Z1) (Source structure has Source Tye U (?))
then I press boton "equivalence numbers" and in the dailogbox which appears, I put the two products-codes with their ratio
Material: 1411131 - 95
Material: 1401212 - 5
I expect this ratio to be used upon settlement of the "deltas" in the production order upon month closing.
Im not sure I have to use the field "Assignment"
Thanks for any input
AartHi Art ,
I think what-ever you have mentioned is correct ..
Please ensure that you have also defined CO-Product in your BOM and its set up correctly..
Now carry out your standard and actual costing process and revert back if you face any diffulties..
Regards
Sarada -
Rule 168 to work with org structure and not relationships
Hi,
I would like to use rule 168 to work with the organizartional structure and not the relationships maintained in PO10 organizational unit.
this is because i want the agent to be the person with the red hat and not the a002 relationship maintained in organizational unit. i tried using rule 157 but it does the same thing and determines agent based on relationships maintained in org unit.
basically i dont want the agent to be any of the line mangers which may have been set up, i want it to be the red hat of the org structure
does anyone know how i can do this, or will i need to delete the relationships between staffing?
Thanks
ForhadHere is a code example to read from the tables in base to the personnel number emulating the SWE_GET_MANAGER function, I hope this helps. Regards.
Z GET MANAGER *******************
***Gets the position for the creator of the requisition
clear V_OBJID.
select single objid into V_OBJID from HRP1001
where otype = 'S' and
plvar = '01' and
rsign = 'A' and
relat = '008' and
begda <= sy-datum and
endda >= sy-datum and
infty = '1001' and
sclas = 'US' and
sobid = pt_cont-VALUE+2.
if sy-subrc = 0.
valid if the user has personnel number don't proceed to look for the chief
clear V_OBJID2.
select single objid into V_OBJID2 from HRP1001
where otype = 'S' and
objid = V_OBJID and
plvar = '01' and
rsign = 'A' and
relat = '008' and
begda <= sy-datum and
endda >= sy-datum and
infty = '1001' and
sclas = 'P'.
if sy-subrc <> 0.
if the user exist in the correspondant date gets the chief position
clear V_POS_SOBID_CH.
select single sobid into V_POS_SOBID_CH from HRP1001
where otype = 'S' and
objid = V_OBJID and
plvar = '01' and
rsign = 'A' and
relat = '002' and
begda <= sy-datum and
endda >= sy-datum and
infty = '1001' and
sclas = 'S'.
if sy-subrc = 0.
if the relationship with a chief position exist gets the chief user id
clear V_US_SOBID_CH.
select single sobid into V_US_SOBID_CH from HRP1001
where otype = 'S' and
objid = V_POS_SOBID_CH and
plvar = '01' and
rsign = 'A' and
relat = '008' and
begda <= sy-datum and
endda >= sy-datum and
infty = '1001' and
sclas = 'US'.
IF sy-subrc = 0.
clear pt_actor.
refresh pt_actor.
pt_actor-otype = 'US'.
pt_actor-objid = V_US_SOBID_CH.
append pt_actor.
endif.
endif.
endif.
endif.
***************End of Z GET MANAGER.***************************** -
Hi,
I am using Apportionment Structure concepts for Main/Co product concepts.Here I assigned eq. number for main and coprod . per activity , ROH wise and OH wise.But particular ROH is only used for Co-prod only.I dont want it apportion it to main product. How to do it??You could use a separate cost element group and then use a separate source structure with 0 for the main product and 1 for the co-product.
-
Apportionment Structure in Co product.
Hi PP Gurus,
What is a significance of Apportionment Structure in Co product?
How does it affect co product as well as main product?
PLease give inputs in detail.
Thanks in advance.
Regards,
PRADEEPDear Pradeep,
Apportionment Structure
Definition
Determines how the total cost for a material is apportioned to the individual co-products
For a primary product or process material, the apportionment structure lists the co-products to which costs are to be distributed
Assigns equivalence numbers to those co-products
Use
The apportionment structure can be used to cost co-products in Product Cost Planning and to distribute actual costs ( Preliminary Settlement for Co-Products) in Cost Object Controlling.
The cost of the primary product or process material is distributed to the co-products on the basis of equivalence numbers. You can also specify the source assignments of a source structure in the apportionment structure.
Structure
An apportionment structure consists of the following:
A key identifying the apportionment structure
A text describing the apportionment structure
A list of co-products to which the total costs are distributed
Integration
You can maintain the apportionment structure in the following places:
In the material master record in the MRP view or Costing view
If you are using the component Production Planning for the Process Industries (PP-PI), the information in the material master record in the apportionment structure is transferred into the material list and from there into the manufacturing order.
Directly in the header of the manufacturing order
If you specify the apportionment structure directly in the manufacturing order, you cannot use a source structure.
When you create a manufacturing order in Cost Object Controlling, the system generates a settlement rule on the basis of the apportionment structure. You can see this settlement rule in the manufacturing order. The equivalences specified in the apportionment structure are transferred into the settlement rule.
You can also specify an apportionment structure in the production version.
Source Structure
Use
A source structure can be used to group total costs by source assignment. If you do not use a source structure, the costs must be apportioned equally to all cost elements. Source structures therefore enable you to define distribution rules that only refer to specific cost elements.
Prerequisites
You define a source structure in Customizing for Product Cost Planning under Cost Estimate with Quantity Structure ® Costing in Joint Production ® Define Source Structure. You assign a source assignment to each cost element group for which you want to apportion the cost separately.
You specify the source assignment in the material master record of the primary product or process material in the MRP view in the apportionment structure.
When you create a source structure, make sure that each debit cost element is assigned to a source assignment. If you are using a cost object hierarchy, the cost elements distributed to the manufacturing orders assigned to the lowest node in the cost object hierarchy must also be included.
Check these links to explore more,
http://help.sap.com/saphelperp60_sp/helpdata/EN/90/ba7207446711d189420000e829fbbd/frameset.htm_
http://help.sap.com/saphelperp60_sp/helpdata/EN/7e/cb855443a311d189ee0000e81ddfac/frameset.htm_
http://help.sap.com/saphelperp60_sp/helpdata/EN/b1/c04fed439a11d189410000e829fbbd/frameset.htm_ (co-product Cost)
Regards
Mangalraj.S -
Excise Invoice number and Internal Number
Hello Friends
I have some queries ,I will be thankful to you if you could guide me, in understanding themu2026
1) When we see the document in J1IEX ,in excise invoice tab, we see two fields :Excise invoice number and Internal Number.
For Internal number we define the range in object J_1INTNUM, but how do we define range for Excise invoice number
2) Where do we maintain the relation between GRPO (Excise Transaction type) with the Excise Invoice number
3) When do we require updating of register ,is it done on daily bases, and how can we see the entries of RG23A part 1.
4) We have excise invoice number range of posted ,in process and cancel documents which is assigned to GRPO transaction type, while running J1I7 though we select last option part 1 posted and part 2 not posted, still the system shows the cancelled documents, How can I avoid the cancel documents
Thanks
Siddharth1) When we see the document in J1IEX ,in excise invoice tab, we see two fields :Excise invoice number and Internal Number.
For Internal number we define the range in object J_1INTNUM, but how do we define range for Excise invoice number
-->> Ex inv nbr will be entered based on the vendor ex invoice .. this is external nbr assignment
2) Where do we maintain the relation between GRPO (Excise Transaction type) with the Excise Invoice number
--->> there is no relation between grpo vs. ex inv nbr
3) When do we require updating of register ,is it done on daily bases, and how can we see the entries of RG23A part 1.
>> u can see in J1I7 or thru table J_1IPART1
4) We have excise invoice number range of posted ,in process and cancel documents which is assigned to GRPO transaction type, while running J1I7 though we select last option part 1 posted and part 2 not posted, still the system shows the cancelled documents, How can I avoid the cancel documents
>> wait for others answers.. -
Vendor name and Vedor number in FAGLL03
Hi All,
My Client is running report for GR/IR, T-code FAGLL03, they want to see Vendor name and Vendor number columns in the report. I searched forums and got the answer for Vendor number but not clear
My questions are
1. I added field LIFNR in BSEG table in the SPRO and am able to see the vendor colum. If I transport to Test system, will I be able to see the vendor column? (in forums some one mentioned that they are not able to see the vendor column when they transport to Test system) they have been asked to run this program BALVBUFDEL, So I am concerned about this issue and want to know exactly what are the things that need to be done, what programs have to be run before transporting to Test system?
Also we are using ECC 6.0 and the highest support package present in the system is SAPKGPAD15. So I dont think I need to install the OSS note 1034354, I checked the OSS note and the highest APPL level is 604? but just making sure about this Patch level and OSS note.
2. Second, how to get the Vendor name cloumn in the report?
Could someone give me solution? your help will be really appreciated.
Thanks,
Harter
Edited by: Harter21 on Nov 8, 2009 2:57 AM
Edited by: Harter21 on Nov 8, 2009 2:58 AMHi Sanjay,
Thanks for the reply. I understood that we get Vendor number from the Function module ITEM_STRUC_EXTENSION and when you run that FM it updates the vendor number in the Structure FAGLPOSYEXT. I want to have Vendor name side to Vendor number field. Can I get vendor name also from the same FM?
I have tried in BSIS table and other OSS notes that are mentioned in that forum link but none of the OSS notes mentioned about the Vendor name and the vendor name is coming from LFA1 table and that has no connection with FAGLL03 report as far as I understand (correct me if I am wrong).
If you have any idea please throw some light.
Thank you very much,
Harter. -
In order confirmation i need invoice number and delivery number.
Dear Experts,
I need invoice number and delivery number in order confirmation.
how can i get the delivery number an invoice number.
Program name: RVADOR01
Regards
AhmedHi
In the Order confirmation Only sales order details will be there
You better write a PERFORM statement in Script and in the subroutine fetch the Delivery number and Invoice number with the following links and display them in script
LIPS-VGBEL = VBAK-VBELN
LIPS-VGPOS = VBAP-POSNR
VBRP-AUBEL = VBAK-VBELN
VBRP-AUPOS = VBAP-POSNR
You can also can use the VBFA table
using Prev doc type = C (order) and Subsequent doc type = J to get the Delivery
and Sunsequent type = M for getting the Invoice Number
see the sample code for subroutine
REPORT ZMPO1 .
form get_freight tables in_par structure itcsy out_par structure itcsy.
tables: ekko,konv,t685t.
data: begin of itab occurs 0,
ebeln like ekko-ebeln,
knumv like ekko-knumv,
end of itab.
data: begin of itab1 occurs 0,
knumv like konv-knumv,
kposn like konv-kposn,
kschl like konv-kschl,
kbetr like konv-kbetr,
waers like konv-waers,
kwert like konv-kwert,
end of itab1.
data: begin of iout occurs 0,
kschl like konv-kschl,
vtext like t685t-vtext,
kbetr like konv-kbetr,
kwert like konv-kwert,
end of iout.
data v_po like ekko-ebeln.
read table in_par with key 'EKKO-EBELN'.
if sy-subrc = 0.
v_po = in_par-value.
select
ebeln
knumv
from ekko
into table itab
where ebeln = v_po.
if sy-subrc = 0.
loop at itab.
select
knumv
kposn
kschl
kbetr
waers
kwert
into table itab1
from konv
where knumv = itab-knumv and
kappl = 'M'.
endloop.
loop at itab1.
if itab1-kposn <> 0.
select single * from t685t
where kschl = itab1-kschl
and kappl = 'M'
and spras = 'EN'.
iout-vtext = t685t-vtext.
iout-kschl = itab1-kschl.
iout-kbetr = itab1-kbetr.
iout-kwert = itab1-kwert.
append iout.
clear iout.
endif.
endloop.
sort itab1 by kposn.
loop at iout.
sort iout by kschl.
if ( iout-kschl eq 'GSDC' OR
iout-kschl eq 'GSFR' OR
iout-kschl eq 'GSIR' ).
at end of kschl.
read table iout index sy-tabix.
sum.
write:/ iout-kschl,iout-vtext,iout-kwert.
out_par-name = 'A1'.
out_par-value = iout-vtext.
append out_par.
out_par-name = 'A2'.
out_par-value = iout-kwert.
append out_par.
endat.
endif.
endloop.
endif.
endif.
endform.
IN THE FORM I AM WRITING THIS CODE.
/:DEFINE &A1& = ' '
/:DEFINE &A2& = ' '
/:PERFORM GET_FREIGHT IN PROGRAM ZMFORM_PO1
/:USING &EKKO-EBELN&
/:CHANGING &A1&
/:CHANGING &A2&
/:ENDPERFORM
&A1&
&A2&
This Code is to be written in the PO form under ADDRESS window.
/:DEFINE &A1& = ' '
/:DEFINE &A2& = ' '
/:DEFINE &A3& = ' '
/:DEFINE &A4& = ' '
/:DEFINE &A5& = ' '
/:DEFINE &A6& = ' '
/:PERFORM GET_VENDOR IN PROGRAM ZMFORM_PO
/:USING &EKKO-EBELN&
/:CHANGING &A1&
/:CHANGING &A2&
/:CHANGING &A3&
/:CHANGING &A4&
/:CHANGING &A5&
/:CHANGING &A6&
/:ENDPERFORM
&A1&
&A2&
&A3&
&A4&
&A5&
&A6&
Regards
Anji -
In 2012, I bought Photoshop CS6 Extended (education edition) for Mac. Now I want to install it on my new Macbook. I have the correct serial number and product code, but I receive an error message: the software may be a false copy etc....What to do?
Here is a copy of the error
This means : Installation failed.
Verification of the Adobe Software failed
The product you want to install is no valid Adobe product and seems to be falsified.
HUgo
Op 29-aug.-2014, om 23:42 heeft Jeff A Wright <[email protected]> het volgende geschreven:
I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Hugo please turn off your e-mail signature.
If your serial number is listed as being valid at http://www.adobe.com/ then I would recommend obtaining a fresh copy of the installation files. You can find details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
To download a fresh copy of the installation files please see Download CS6 products.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6685617#6685617
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Dynamic Structure and Components Issue
Hi,
I have a requirement of creating an inbound idoc program and populating dynamic structures. The program for the dynamic structure creation is as follows: ( I have been referencing Heilmans Blog ): The part for the inbound idoc creation works fine. The data will come in a flat file with Table name and 15 characterstcis. The table name is known at runtime. I need to create the dynamic table, find out the components and then populate the custom table with the dynamically created structures.
Custom table: 4 components
Internal table from file: 15 components with value.
There could be more than one table in the flat file and not all components or char in the flat file is mapped to the table.
I have been able to code the part where the components in the structure and the file components are in the same order. The problem is if the components in the structure and the file components are not in the same order. I would appreciate some inputs in this issue.
The part that has to be worked out is:
IF NOT L_TABNAME IS INITIAL.
perform get_structure.
perform create_dynamic_itab.
perform get_data.
ENDIF.
*& Report /FACTGLB/GTDMI_VARTAB_IDOCS02 *
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-07-02
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
REPORT ZGTDMI_VARTAB_IDOCS_DYNAMIC
NO STANDARD PAGE HEADING
LINE-SIZE 150
LINE-COUNT 55
MESSAGE-ID zfactglb.
**Include for Global Data Declaration
*INCLUDE /FACTGLB/GTDMI_VARTAB_TOP02.
**Include for Selection Screen
*INCLUDE /FACTGLB/GTDMI_VARTAB_SEL02.
**Include for Sub Routines
*INCLUDE /FACTGLB/GTDMI_VARTAB_FORMS02.
*& Include /FACTGLB/GTDMI_VARTAB_TOP02 *
*& Include /FACTGLB/GTDMI_VARTAB_TOP02 *
*& Include /FACTGLB/GTDMI_VARTAB_TOP
*& Include /FACTGLB/GTDMI_VARTAB_TOP
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-07-02
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
TYPE POOLS
*Type declaration for ALV display
TYPE-POOLS : slis.
Include .
type-pools: col, "#EC *
icon, "#EC *
sym, "#EC *
abap. "#EC *
Target structure definitions
tables:
E1CUVTM, "#EC *
E1DATEM, "#EC *
E1CUV1M, "#EC *
edp21, "#EC *
edi_dc40, "#EC *
edi_dd40, "#EC *
edi_ds40. "#EC *
GLOBAL TYPES
TYPES : BEGIN OF ty_vartab.
include structure E1CUVTM.
TYPES: END OF ty_vartab.
TYPES : BEGIN OF ty_vartabdate.
INCLUDE STRUCTURE E1DATEM.
TYPES : END OF ty_vartabdate.
*Structure for data retreived
TYPES : BEGIN OF ty_vardetails.
INCLUDE STRUCTURE E1CUV1M.
TYPES : END OF ty_vardetails.
*Structure for data retreived from table tabinput.
TYPES : BEGIN OF ty_tabinput,
lines type string,
END OF ty_tabinput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_dsninput, "#EC *
LINE(101) type c,
END OF ty_dsninput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_newinput, "#EC *
LINE(101) type c,
flag(1) type c,
END OF ty_newinput.
*Structure for keeping the values of all the custom tables
TYPES : BEGIN OF ty_custom_tabs,
matnr TYPE matnr, "Material Number
werks TYPE werks_d, "Plant
lgort TYPE lgort_d, "Storage Location
qunty TYPE P DECIMALS 2, "Standard Order Quantity
det_loc TYPE CHAR6, "Detail Location
class TYPE CHAR2, "Class
rate TYPE P DECIMALS 2, "Rate
END OF ty_custom_tabs.
*Type declared for the internal table and work area which will store
*fields for error log
TYPES : BEGIN OF ty_error_log,
matnr TYPE matnr, "Material Number
mtart TYPE mtart, "Material Type
sel_data TYPE char10, "No of selectyed data
END OF ty_error_log.
*Structure for keeping the output data
TYPES : BEGIN OF ty_final,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
END OF ty_final.
TYPES: begin of TY_CONTENTHD,
VTNAM(018) type C,
FLAG(001) type C,
end of TY_CONTENTHD.
TYPES: begin of TY_CONTENT,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
Z_VARCOND TYPE VARCOND.
TYPES: end of TY_CONTENT.
TYPES: begin of TY_CONTENTTAB,
VTNAM(018) type C,
COMP1(30) TYPE C,
CHAR1(030) type C,
COMP2(30) TYPE C,
CHAR2(030) type C,
COMP3(30) TYPE C,
CHAR3(030) type C,
COMP4(30) TYPE C,
CHAR4(030) type C,
COMP5(30) TYPE C,
CHAR5(030) type C,
COMP6(30) TYPE C,
CHAR6(030) type C,
COMP7(30) TYPE C,
CHAR7(030) type C,
COMP8(30) TYPE C,
CHAR8(030) type C,
COMP9(30) TYPE C,
CHAR9(030) type C,
COMP10(30) TYPE C,
CHAR10(030) type C,
COMP11(30) TYPE C,
CHAR11(030) type C,
COMP12(30) TYPE C,
CHAR12(030) type C,
COMP13(30) TYPE C,
CHAR13(030) type C,
COMP14(30) TYPE C,
CHAR14(030) type C,
COMP15(30) TYPE C,
CHAR15(030) type C,
FLAG(001) type C.
TYPES: end of TY_CONTENTTAB.
TYPES: BEGIN OF TY_E1CUVTM,
MSGFN TYPE MSGFN,
VAR_TAB TYPE APITABL,
STATUS TYPE RCUTBST,
VTGROUP TYPE RCUTBGR,
AUTHSTRUC TYPE RCUTBBE,
AUTHENTRY TYPE RCUFNBI,
FLDELETE TYPE FLLKENZ,
DBTABNAME TYPE TABNAME16,
DBCONACTIVE TYPE DBCON_ACTI,
PRESDEC TYPE VTDCT,
END OF TY_E1CUVTM.
TYPES: BEGIN OF TY_E1CUV1M,
MSGFN TYPE MSGFN,
VTLINENO TYPE VTLINENO,
VTCHARACT TYPE ATNAM,
ATWRT TYPE ATWRT,
ATFLV TYPE ATFLV,
ATAWE TYPE MSEHI,
ATFLB TYPE ATFLB,
ATAW1 TYPE MSEHI,
ATCOD TYPE ATCOD,
ATTLV TYPE ATTLV,
ATTLB TYPE ATTLB,
ATPRZ TYPE ATPRZ,
ATINC TYPE ATINC,
VTLINENO5 TYPE VTLINENO5,
END OF TY_E1CUV1M.
TYPES: BEGIN OF TY_E1DATEM,
MSGFN TYPE MSGFN,
KEY_DATE TYPE SYDATUM,
AENNR TYPE AENNR,
EFFECTIVITY TYPE CC_MTEFF,
END OF TY_E1DATEM.
TYPES: BEGIN OF ty_vtnam,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Name of variant table
dbtab_name type tabname16, "Custom table Name
error TYPE char1, " Indicates error in data format
reas TYPE char50, " Reason for failure
END OF ty_vtnam.
Get data type for characteristic
TYPES: BEGIN OF ty_cabn,
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
atfor TYPE atfor, "Data type of characteristic
atson TYPE atson, "Indicator: Additional Values
atprt TYPE atprt, "Check table
atprr TYPE atprr, "Name of Check Report Program
atprf TYPE atprf, "Function Module for Checking Values
anzdz TYPE anzdz, "Number of Decimal Places
check TYPE char1, "Indicates check required or not
END OF ty_cabn.
Get field names of variant table
TYPES: BEGIN OF ty_cuvtab_fld,
vtint TYPE vtint, " Internal number of variant table
atinn TYPE atinn, " Internal characteristic
vtpos TYPE vtpos, " Item number of characteristic in variant
*mod-012
DBFLD type NAME_FELD,
*mod-012
exist TYPE char1, " X Indictaes characteristic is part of fil
END OF ty_cuvtab_fld.
Store all data in internal table
TYPES: BEGIN OF ty_file,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
flag TYPE char1,
error TYPE char50,
END OF ty_file.
To check for duplicates
TYPES: BEGIN OF ty_dupl,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
slnid TYPE slnid,
END OF ty_dupl.
Get previously loaded characteristic values for internal table (CHAR)
TYPES: BEGIN OF ty_cuvtab_valc,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
valc TYPE atwrt, " Characteristic Value
END OF ty_cuvtab_valc.
Get previously loaded characteristic values for internal table (NUM)
TYPES: BEGIN OF ty_cuvtab_valn,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
val_from TYPE atflv, " Internal floating point from
END OF ty_cuvtab_valn.
Store column positions of characteristics
TYPES: BEGIN OF ty_col_pos,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Variant table name
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
field TYPE fieldname, "Field name
req TYPE char1, " Required or not
vtpos TYPE vtpos, " Item number of characteristics
DBFLD type NAME_FELD, " Field Name of Custom table.
END OF ty_col_pos.
Store valid values for characteristics
TYPES: BEGIN OF ty_cawn,
atinn TYPE atinn, " Internal characteristic
atzhl TYPE atzhl, " Int counter
atwrt TYPE atwrt, " Characteristic Value
atflv TYPE atflv, " Internal floating point from
lkenz TYPE lkenz, " Deletion indicator
END OF ty_cawn.
Store error messages for individual lines
TYPES: BEGIN OF ty_error,
vtnam TYPE vtnam, " Variant table name
fname TYPE fieldname, " Fieldname
atnam TYPE atnam, " Characteristic name
atwrt TYPE atwrt, " Characteristic value
row TYPE char5, " Row id
END OF ty_error.
Begin TPR# 4618
To store unique number for variant
TYPES: BEGIN OF ty_vnt_ma,
vtnam TYPE vtnam,
unique_no TYPE ZGTDM_UNQN,
no_chr TYPE ZGTDM_NO_CHR,
END OF ty_vnt_ma.
TYPES: BEGIN OF ty_dbtab,
vtint TYPE vtint,
vtnam TYPE vtnam,
DBTAB_NAME TYPE TABNAME16,
END OF ty_dbtab.
To find out concatenated number for
TYPES: BEGIN OF ty_split,
f1 TYPE char6,
END OF ty_split.
TYPES: BEGIN OF ty_charval,
char TYPE char30,
END OF ty_charval.
TYPES: BEGIN OF TY_DATA,
name TYPE string,
value(15) type c,
END OF TY_DATA.
DATA: I_DATATAB TYPE STANDARD TABLE OF TY_DATA.
TYPES:
TUMLS_MESSTYPE type /SAPDMC/LS_MESSTYPE,
TUMLS_MESSTYPETXT type EDI_TEXT60,
TUMLS_MESSCODE type EDIPMESCOD.
TYPES:
TUMLS_TABNAME TYPE TABNAME, "#EC *
TUMLS_SEGMENT TYPE TABNAME. "#EC *
TYPES:
TUMLS_PATHFILE TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILENAME TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILETEXT TYPE /SAPDMC/LS_FILETEXT.
TYPES:
BEGIN OF type_errorline,
msgty type SYMSGTY,
id type SYMSGID,
msgno type symsgno,
par1 type symsgv,
par2 type symsgv,
par3 type symsgv,
par4 type symsgv,
END OF type_errorline.
TYPES:
type_errortab TYPE SORTED TABLE
OF type_errorline
WITH NON-UNIQUE KEY id msgno par1 par2 par3 par4.
DATA:
LV_INDEX TYPE SY-INDEX,
LV_INDEX2 TYPE SYINDEX,
LV_TABLE1 TYPE REF TO DATA,
LV_TABLE2 TYPE REF TO DATA,
LV_TABLE3 TYPE REF TO DATA,
LV_TABLE4 TYPE REF TO DATA,
LV_LINE1 TYPE REF TO DATA,
LV_LINE2 TYPE REF TO DATA,
LV_LINE3 TYPE REF TO DATA,
LV_LINE4 TYPE REF TO DATA,
LV_OFFSET1 TYPE SYTABIX,
ST_IS_LAYOUT_ALV TYPE SLIS_LAYOUT_ALV,
L_IT_FCATLOG_ALV TYPE SLIS_T_FIELDCAT_ALV,
L_IT_FLDCAT TYPE LVC_T_FCAT.
GLOBAL INTERNAL TABLES
DATA : i_newinput TYPE STANDARD TABLE OF ty_newinput INITIAL SIZE 0."#EC *
DATA : i_contentheader1 TYPE STANDARD TABLE OF ty_contenthd INITIAL SIZE 0."#EC *
DATA : i_contenttab1 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab2 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab3 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab4 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab5 TYPE STANDARD TABLE OF ty_contenttab INITIAL SIZE 0."#EC *
DATA : i_E1CUV1M TYPE STANDARD TABLE OF E1CUV1M INITIAL SIZE 0."#EC *
DATA : i_errortab TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
GLOBAL WORK AREAS
**Internal Table for the structure TY_T001L
DATA : wa_vartab TYPE ty_vartab. "#EC *
DATA : wa_vartabdate TYPE ty_vartabdate. "#EC *
DATA : wa_vardetails TYPE ty_vardetails. "#EC *
DATA : wa_tabinput TYPE ty_tabinput. "#EC *
DATA : wa_dsninput TYPE ty_dsninput. "#EC *
DATA : wa_newinput TYPE ty_newinput. "#EC *
DATA : wa_gnewinput TYPE ty_newinput. "#EC *
DATA : wa_ginput_data TYPE ty_newinput. "#EC *
DATA : wa_final TYPE ty_final. "#EC *
DATA : wa_content TYPE ty_content. "#EC *
DATA : wa_contenthd TYPE ty_contenthd. "#EC *
DATA : wa_contentheader type ty_contenthd. "#EC *
DATA : wa_contenttab TYPE ty_content. "#EC *
DATA : wa_content1 TYPE ty_content. "#EC *
DATA : wa_contenthd1 TYPE ty_contenthd. "#EC *
DATA : wa_contentheader1 type ty_contenthd. "#EC *
DATA : wa_contenttab1 TYPE ty_content. "#EC *
DATA : wa_contenttab2 TYPE ty_content. "#EC *'
DATA : wa_contenttab3 TYPE ty_content. "#EC *
DATA : wa_contenttab4 TYPE ty_content. "#EC *
DATA : wa_contenttab5 TYPE ty_contentTAB. "#EC *
DATA : wa_E1CUVTM TYPE E1CUVTM. "#EC *
DATA : wa_E1CUV1M TYPE E1CUV1M. "#EC *
DATA : wa_E1DATEM TYPE E1DATEM. "#EC *
DATA : wa_error_tab TYPE solisti1. "#EC *
INTERNAL TABLES AND WORK AREAS FOR BDC
*Internal Table to store the data to display the error message
DATA : i_errormsg TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
*Internal Table to store the data to display the error message
DATA : i_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
DATA : itab_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
**Work area to store the data to display the error message
DATA : wa_errormsg TYPE solisti1. "#EC *
**Internal table which will store data for the error log
DATA:i_error_log TYPE STANDARD TABLE OF ty_error_log INITIAL SIZE 0."#EC *
GLOBAL VARIABLES
DATA: G_FILE TYPE string. "#EC *
DATA : g_ctr_input_recs(5) type c. "#EC *
DATA: g_ctr_output_recs(5) type p. "#EC *
data : g_msg(100) type c. "#EC *
data: g_struct_file TYPE string. "#EC *
data: g_login type FILEINTERN. "#EC *
data: g_phyin type string. "#EC *
DATA: g_lprnt type RSPOPSHORT. "#EC *
DATA: g_FNAME1 TYPE STRING. "#EC *
DATA : g_repid TYPE repid, "#EC *
g_exit(1) TYPE C, "#EC *
gx_variant type disvariant. "#EC *
DATA : g_lines TYPE i . "#EC *
data : g_save(1) type c. "#EC *
DATA : g_splid TYPE rspoid . "#EC *
data: p_login type FILEINTERN. "#EC *
data: p_phyin type string. "#EC *
DATA:
go_table TYPE REF TO cl_salv_table,
go_sdescr TYPE REF TO cl_abap_structdescr,
go_tdescr TYPE REF TO cl_abap_tabledescr,
gdo_data TYPE REF TO data,
gdo_handle TYPE REF TO data,
gs_comp TYPE abap_componentdescr,
gt_components TYPE abap_component_tab.
FIELD-SYMBOLS:
TYPE table.
GLOBAL CONSTANTS
CONSTANTS c_msgar TYPE rslgarea VALUE 'F8'. "#EC *
CONSTANTS c_msgid TYPE rslgsubid VALUE 'E'. "#EC *
CONSTANTS c_urgnc TYPE char04 VALUE 'HIGH'. "#EC *
CONSTANTS C_X(1) TYPE C VALUE 'X'. "#EC *
CONSTANTS C_Y(1) TYPE C VALUE 'Y'. "#EC *
CONSTANTS C_Z(1) TYPE C VALUE 'Z'. "#EC *
CONSTANTS C_E(1) TYPE C VALUE 'E'. "#EC *
CONSTANTS C_SAP(3) TYPE C VALUE 'SAP'. "#EC *
CONSTANTS C_MOD(3) TYPE C VALUE 'MOD'. "#EC *
CONSTANTS C_MD1(3) TYPE C VALUE 'MD1'. "#EC *
CONSTANTS C_MD2(3) TYPE C VALUE 'MD2'. "#EC *
CONSTANTS C_MD3(3) TYPE C VALUE 'MD3'. "#EC *
CONSTANTS C_MD4(3) TYPE C VALUE 'MD4'. "#EC *
CONSTANTS C_MD5(3) TYPE C VALUE 'MD5'. "#EC *
constants: c_000001(6) type c value '000001', "#EC *
c_e1cuv1m(7) type c value 'E1CUV1M', "#EC *
c_02(2) type c value '02', "#EC *
c_009(3) type c value '009', "#EC *
c_0001(4) type c value '0001'. "#EC *
constants: c_e1datem(7) type c value 'E1DATEM'. "#EC *
constants: c_e1cuvtm(7) type c value 'E1CUVTM'. "#EC *
GLOBAL INTERNAL TABLES FOR ALV DISPLAY
*Internal tables for ALV Field cat
DATA :
i_fieldcat_ov TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_dtl TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_ov1 TYPE lvc_t_fcat, "#EC *
i_events TYPE slis_t_event. "#EC *
GLOBAL WORK AREAS FOR ALV DISPLAY
*Work area for ALV Field layout
DATA : wa_layout TYPE slis_layout_alv. "#EC *
*Work area for Field Cat. Table
DATA : wa_fieldcat TYPE slis_fieldcat_alv. "#EC *
GLOBAL VARIABLES FOR ALV DISPLAY
DATA : g_event TYPE slis_t_event. "#EC *
DATA : g_top_of_page TYPE slis_t_listheader. "#EC *
DATA : g_ok_code TYPE char4. "#EC *
DATA : g_variant type disvariant. "#EC *
GLOBAL CONSTANTS FOR ALV DISPLAY
BAL handling
data: iv_log_handle type BALLOGHNDL. "#EC *
data: is_log_header type bal_s_log. "#EC *
data: iv_object type bal_s_log-object value 'CAPI'. "#EC *
data: iv_subobject type bal_s_log-subobject value 'CAPI_LOG'."#EC *
data: iv_tcode type bal_s_log-altcode value 'SE38'. "#EC *
*MOD-005
RANGES:
R_MESTYP FOR EDIDC-MESTYP, "#EC *
R_CREDAT FOR EDIDC-CREDAT, "#EC *
R_CRETIM FOR EDIDC-CRETIM, "#EC *
R_SNDPRT FOR EDIDC-SNDPRT, "#EC *
R_SNDPRN FOR EDIDC-SNDPRN. "#EC *
DATA:
L_MESSTYPE TYPE TUMLS_MESSTYPE. "#EC *
*MOD-005
data: p_sndprn TYPE EDI_SNDPRN, "#EC *
p_sndprt TYPE EDI_SNDPRT, "#EC *
p_sndpor TYPE EDI_SNDPOR. "#EC *
data: p_rcvprn TYPE EDI_RCVPRN, "#EC *
p_rcvprt TYPE EDI_RCVPRT, "#EC *
p_rcvpor TYPE EDI_RCVPOR. "#EC *
data:
init_E1CUVTM type E1CUVTM, "#EC *
prev_E1CUVTM type E1CUVTM, "#EC *
init_E1DATEM type E1DATEM, "#EC *
prev_E1DATEM type E1DATEM, "#EC *
init_E1CUV1M type E1CUV1M, "#EC *
prev_E1CUV1M type E1CUV1M. "#EC *
Source structure definitions
data:
begin of LSMW_TAB_CONTENT, "#EC *
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
end of LSMW_TAB_CONTENT.
Counters
data:
g_cnt_VAR_TAB type i, "#EC *
g_cnt_TAB_CONTENT type i. "#EC *
Counter ct_xxxxxxxxxx: number of transferred records
data:
ct_edi_dc40 type i, "#EC *
cs_edi_dc40 type i, "#EC *
ct_E1CUVTM type i, "#EC *
cs_E1CUVTM type i, "#EC *
ct_E1DATEM type i, "#EC *
cs_E1DATEM type i, "#EC *
ct_E1CUV1M type i, "#EC *
cs_E1CUV1M type i. "#EC *
Global data definitions and data declarations
DATA: wa_cabn TYPE ty_cabn,
wa_cawn TYPE ty_cawn,
wa_file TYPE ty_file,
wa_vtnam TYPE ty_vtnam,
wa_cuvtab_fld TYPE ty_cuvtab_fld,
wa_cuvtab_valn TYPE ty_cuvtab_valn,
wa_cuvtab_valc TYPE ty_cuvtab_valc,
wa_col_pos TYPE ty_col_pos,
wa_error TYPE ty_error,
wa_dupl TYPE ty_dupl,
wa_dupl_file TYPE ty_dupl.
DATA: wa_vnt_ma TYPE ty_vnt_ma,
wa_split TYPE ty_split.
DATA: wa_charval TYPE ty_charval. "#EC *
Internal table
DATA: i_cabn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_temp TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_atinn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_file TYPE STANDARD TABLE OF ty_file, "#EC *
i_file_tmp TYPE STANDARD TABLE OF ty_file, "#EC *
i_vtnam TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab_fld TYPE STANDARD TABLE OF ty_cuvtab_fld, "#EC *
i_cuvtab_valn TYPE STANDARD TABLE OF ty_cuvtab_valn, "#EC *
i_cuvtab_valc TYPE STANDARD TABLE OF ty_cuvtab_valc, "#EC *
i_col_pos TYPE STANDARD TABLE OF ty_col_pos, "#EC *
i_cawn TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_n TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_c TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_i TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cuv_error TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_dupl TYPE STANDARD TABLE OF ty_dupl, "#EC *
i_dbtab TYPE STANDARD TABLE OF ty_dbtab. "#EC *
DATA: i_vnt_ma TYPE STANDARD TABLE OF ty_vnt_ma, "#EC *
i_split TYPE STANDARD TABLE OF ty_split. "#EC *
DATA: i_dupl_file TYPE STANDARD TABLE OF ty_dupl. "#EC *
DATA: i_charval TYPE STANDARD TABLE OF ty_charval. "#EC *
Constants
CONSTANTS: c_char TYPE atfor VALUE 'CHAR', "#EC *
c_date TYPE atfor VALUE 'DATE', "#EC *
c_time TYPE atfor VALUE 'TIME', "#EC *
c_varcond TYPE atnam VALUE 'Z_VARCOND'. "#EC *
Field Symbols
FIELD-SYMBOLS: TYPE ANY.
Variables
DATA: g_raw(500) TYPE c, "#EC *
g_invalid TYPE char1, "#EC *
g_error TYPE char1, "#EC *
g_message TYPE char50, "#EC *
g_slnid_c TYPE slnid, "#EC *
g_slnid_n TYPE slnid, "#EC *
g_row TYPE char5. "#EC *
DATA: g_varcond TYPE varcond, "Variant condition "#EC NEEDED
g_split_var TYPE i. "#EC *
Types: begin of ty_charname,
name type atnam,
end of ty_charname.
data: wa_charname type ty_charname, "#EC *
i_charname type standard table of ty_charname. "#EC *
data: cnt_i type i, "#EC *
g_tabix type char10. "#EC *
Types: begin of ty_itab_zedidc40.
include structure edi_dc40.
TYPES: end of ty_itab_zedidc40.
Types: begin of ty_itab_zedidd40.
include structure edi_dd40.
TYPES: end of ty_itab_zedidd40.
DATA: itab_zedidc40 type standard table of
ty_itab_zedidc40 initial size 0. "#EC *
DATA: itab_zedidd40 type standard table of
ty_itab_zedidd40 initial size 0. "#EC *
DATA: wa_itab_zedidc40 type ty_itab_zedidc40.
DATA: wa_itab_zedidd40 type ty_itab_zedidd40.
*MOD-009
data: itab_ze1cuvtm type e1cuvtm, "#EC *
itab_ze1datem type e1datem, "#EC *
itab_ze1cuv1m type e1cuv1m. "#EC *
data: wdocnum(16) type n value 0. "#EC *
data: wsegnum(6) type n value 0. "#EC *
data: witemno(10) type n value 0. "#EC *
data: witemno_new(10) type n value 0. "#EC *
data: witemno_gst(10) type n value 0. "#EC *
data: witemno_qst(10) type n value 0. "#EC *
TYPES: BEGIN OF ty_input_data1, "#EC *
line(560) type c,
flag(1) type c,
END OF ty_input_data1.
DATA: i_input_data type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: i_input_data1 type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: wa_input_data type ty_input_data1. "#EC *
DATA: g_cnt_input_recs type i. "#EC *
DATA: g_flg_error type c. "#EC *
DATA: l_lines type i. "#EC *
DATA: l_lines_varcond type i. "#EC *
DATA: l_lines1 type i. "#EC *
DATA: l_tabix type i. "#EC *
DATA: wa_input_data1 type ty_input_data1. "#EC *
DATA: FILE TYPE STRING.
Fields that are made available to the user:
DATA:
g_cnt_records_read TYPE i, "#EC *
g_cnt_records_transferred TYPE i, "#EC *
g_cnt_transactions_read TYPE i, "#EC *
g_cnt_transactions_transferred TYPE i, "#EC *
g_cnt_idocs_package TYPE i. "#EC *
data: v_log_handle type balloghndl. "#EC *
DATA: gt_curr_edi_dc40 TYPE STANDARD TABLE OF edi_dc40 initial size 0."#EC *
DATA: gt_curr_edi_dd40 TYPE STANDARD TABLE OF edi_dd40 initial size 0."#EC *
DATA: wa_curr_edi_dc40 TYPE edi_dc40. "#EC *
DATA: wa_curr_edi_dd40 TYPE edi_dd40. "#EC *
internal table for error messages during conversion
DATA: g_error_tab TYPE type_errortab, "#EC *
wa_errortab TYPE type_errorline. "#EC *
DATA: g_edidd_segnam type EDI4SEGNAM, "#EC *
g_edidd_hlevel type EDI4HLEVEC. "#EC *
DATA: g_segnum(6) TYPE n.
DATA: g_objecttype(2) type C.
DATA: P_FNAME(128) TYPE C VALUE '/usr/sap/trans/vartabheader'. " MODIF ID MD1 OBLIGATORY.
DATA: P_FNAME1(128) TYPE C VALUE '/usr/sap/trans/vartabcontent'. " MODIF ID MD1 OBLIGATORY.
DATA: alv_fldcat TYPE slis_t_fieldcat_alv,
it_fldcat TYPE lvc_t_fcat.
field-symbols: .
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
data: l_wa_data TYPE TY_CONTENT,
l_tabname TYPE tabname,
itab_data TYPE standard table of TY_CONTENT.
DATA: l_len_slnid TYPE i, "#EC NEEDED
l_len_varcond TYPE i, "#EC NEEDED
l_temp_slnid TYPE i, "#EC NEEDED
l_temp_slnc TYPE char5, "#EC NEEDED
l_temp_varcond TYPE varcond, "#EC NEEDED
l_sub_var TYPE i, "#EC NEEDED
l_val_split TYPE char10. "#EC NEEDED
DATA: l_invalid. "#EC NEEDED
DECLARATION FOR SELECTION SCREEN
*selection-screen skip 1.
*For all the input field entries
SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
*Parameter for Input File Name:
PARAMETERS: p_inpt TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File Variant table
PARAMETERS: p_inpt1 TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File variant Content
SELECTION-SCREEN END OF BLOCK bl1.
IDoc creation
selection-screen begin of block idocpars
with frame title text-006.
parameters:
p_trfcpt as checkbox default C_X MODIF ID MD3,
p_packge(5) type n default 1 MODIF ID MD3.
selection-screen end of block idocpars.
SELECTION-SCREEN BEGIN OF BLOCK bl5 WITH FRAME TITLE text-038.
Radio Buttons :
parameters:
rb_idocp RADIOBUTTON GROUP RB3 DEFAULT 'X' USER-COMMAND UCOM MODIF ID MD6,
rb_custt RADIOBUTTON GROUP RB3 MODIF ID MD6.
SELECTION-SCREEN END OF BLOCK bl5.
SELECTION-SCREEN BEGIN OF BLOCK bl3 WITH FRAME TITLE text-032.
Radio Buttons :
parameters:
rb_apsrv RADIOBUTTON GROUP RB1 DEFAULT 'X' USER-COMMAND UCOM MODIF ID MD4,
rb_convt RADIOBUTTON GROUP RB1 MODIF ID MD4,
rb_idoc RADIOBUTTON GROUP RB1 MODIF ID MD4,
rb_proc RADIOBUTTON GROUP RB1 MODIF ID MD4.
SELECTION-SCREEN END OF BLOCK bl3.
SELECTION-SCREEN BEGIN OF BLOCK bl4 WITH FRAME TITLE text-037.
Radio Buttons :
parameters:
rb_appct RADIOBUTTON GROUP RB2 DEFAULT 'X' USER-COMMAND UCOM MODIF ID MD5,
rb_conct RADIOBUTTON GROUP RB2 MODIF ID MD5,
rb_cust RADIOBUTTON GROUP RB2 MODIF ID MD5.
SELECTION-SCREEN END OF BLOCK bl4.
INITIALIZATION
INITIALIZATION.
Check selection-screen entries *
*AT SELECTION-SCREEN.
PERFORM sub_get_physical_file USING p_fpath p_fname.
PERFORM sub_get_physical_file1 USING p_fpath1 p_fname1.
AT SELECTION SCREEN
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
PERFORM sub_get_file. " CHANGING p_fname. "#EC *
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname1.
PERFORM sub_get_file1. " CHANGING p_fname1. "#EC *
AT SELECTIHi,
I now have a requirement for the following:
Duplicate VARCOND if I Use small letters and capital letters. Sequential number also duplicated.
Here is the code and would appreciate if someone could shed some light on the issue.
*& Report ZVARTABDYNFINAL
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-08-25
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
REPORT ZVARTABDYNFINAL NO STANDARD PAGE HEADING
LINE-SIZE 150
LINE-COUNT 55
MESSAGE-ID /factglb/gta_custdev.
*& Include /FACTGLB/GTDMI_VARTAB_TOP02 *
*& Include /FACTGLB/GTDMI_VARTAB_TOP
*& Include /FACTGLB/GTDMI_VARTAB_TOP
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-08-25
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
TYPE POOLS
TYPE POOLS
TYPE POOLS
*Type declaration for ALV display
TYPE-POOLS : slis.
Include <icon>.
type-pools: col, "#EC *
icon, "#EC *
sym, "#EC *
abap. "#EC *
Target structure definitions
tables:
E1CUVTM, "#EC *
E1DATEM, "#EC *
E1CUV1M, "#EC *
edp21, "#EC *
edi_dc40, "#EC *
edi_dd40, "#EC *
edi_ds40. "#EC *
GLOBAL TYPES
TYPES : BEGIN OF ty_vartab.
include structure E1CUVTM.
TYPES: END OF ty_vartab.
TYPES : BEGIN OF ty_vartabdate.
INCLUDE STRUCTURE E1DATEM.
TYPES : END OF ty_vartabdate.
*Structure for data retreived
TYPES : BEGIN OF ty_vardetails.
INCLUDE STRUCTURE E1CUV1M.
TYPES : END OF ty_vardetails.
*Structure for data retreived from table tabinput.
TYPES : BEGIN OF ty_tabinput,
lines type string,
END OF ty_tabinput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_dsninput, "#EC *
LINE(101) type c,
END OF ty_dsninput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_newinput, "#EC *
LINE(101) type c,
flag(1) type c,
END OF ty_newinput.
*Structure for keeping the values of all the custom tables
TYPES : BEGIN OF ty_custom_tabs,
matnr TYPE matnr, "Material Number
werks TYPE werks_d, "Plant
lgort TYPE lgort_d, "Storage Location
qunty TYPE P DECIMALS 2, "Standard Order Quantity
det_loc TYPE CHAR6, "Detail Location
class TYPE CHAR2, "Class
rate TYPE P DECIMALS 2, "Rate
END OF ty_custom_tabs.
*Type declared for the internal table and work area which will store
*fields for error log
TYPES : BEGIN OF ty_error_log,
matnr TYPE matnr, "Material Number
mtart TYPE mtart, "Material Type
sel_data TYPE char10, "No of selectyed data
END OF ty_error_log.
*Structure for keeping the output data
TYPES : BEGIN OF ty_final,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
END OF ty_final.
TYPES: begin of TY_CONTENTHD,
VTNAM(018) type C,
FLAG(001) type C,
end of TY_CONTENTHD.
TYPES: begin of TY_CONTENT,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
Z_VARCOND type VARCOND.
TYPES: end of TY_CONTENT.
TYPES: begin of TY_CONTENTTAB,
VTNAM(018) type C,
COMP1(30) TYPE C,
CHAR1(030) type C,
COMP2(30) TYPE C,
CHAR2(030) type C,
COMP3(30) TYPE C,
CHAR3(030) type C,
COMP4(30) TYPE C,
CHAR4(030) type C,
COMP5(30) TYPE C,
CHAR5(030) type C,
COMP6(30) TYPE C,
CHAR6(030) type C,
COMP7(30) TYPE C,
CHAR7(030) type C,
COMP8(30) TYPE C,
CHAR8(030) type C,
COMP9(30) TYPE C,
CHAR9(030) type C,
COMP10(30) TYPE C,
CHAR10(030) type C,
COMP11(30) TYPE C,
CHAR11(030) type C,
COMP12(30) TYPE C,
CHAR12(030) type C,
COMP13(30) TYPE C,
CHAR13(030) type C,
COMP14(30) TYPE C,
CHAR14(030) type C,
COMP15(30) TYPE C,
CHAR15(030) type C,
FLAG(001) type C.
TYPES: end of TY_CONTENTTAB.
TYPES: BEGIN OF TY_E1CUVTM,
MSGFN TYPE MSGFN,
VAR_TAB TYPE APITABL,
STATUS TYPE RCUTBST,
VTGROUP TYPE RCUTBGR,
AUTHSTRUC TYPE RCUTBBE,
AUTHENTRY TYPE RCUFNBI,
FLDELETE TYPE FLLKENZ,
DBTABNAME TYPE TABNAME16,
DBCONACTIVE TYPE DBCON_ACTI,
PRESDEC TYPE VTDCT,
END OF TY_E1CUVTM.
TYPES: BEGIN OF TY_E1CUV1M,
MSGFN TYPE MSGFN,
VTLINENO TYPE VTLINENO,
VTCHARACT TYPE ATNAM,
ATWRT TYPE ATWRT,
ATFLV TYPE ATFLV,
ATAWE TYPE MSEHI,
ATFLB TYPE ATFLB,
ATAW1 TYPE MSEHI,
ATCOD TYPE ATCOD,
ATTLV TYPE ATTLV,
ATTLB TYPE ATTLB,
ATPRZ TYPE ATPRZ,
ATINC TYPE ATINC,
VTLINENO5 TYPE VTLINENO5,
END OF TY_E1CUV1M.
TYPES: BEGIN OF TY_E1DATEM,
MSGFN TYPE MSGFN,
KEY_DATE TYPE SYDATUM,
AENNR TYPE AENNR,
EFFECTIVITY TYPE CC_MTEFF,
END OF TY_E1DATEM.
TYPES: BEGIN OF ty_vtnam,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Name of variant table
dbtab_name type tabname16, "Custom table Name
error TYPE char1, " Indicates error in data format
reas TYPE char50, " Reason for failure
END OF ty_vtnam.
Get data type for characteristic
TYPES: BEGIN OF ty_cabn,
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
atfor TYPE atfor, "Data type of characteristic
atson TYPE atson, "Indicator: Additional Values
atprt TYPE atprt, "Check table
atprr TYPE atprr, "Name of Check Report Program
atprf TYPE atprf, "Function Module for Checking Values
anzdz TYPE anzdz, "Number of Decimal Places
check TYPE char1, "Indicates check required or not
END OF ty_cabn.
Get field names of variant table
TYPES: BEGIN OF ty_cuvtab_fld,
vtint TYPE vtint, " Internal number of variant table
atinn TYPE atinn, " Internal characteristic
vtpos TYPE vtpos, " Item number of characteristic in variant
*mod-012
DBFLD type NAME_FELD,
*mod-012
exist TYPE char1, " X Indictaes characteristic is part of fil
END OF ty_cuvtab_fld.
Store all data in internal table
TYPES: BEGIN OF ty_file,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
flag TYPE char1,
error TYPE char50,
END OF ty_file.
To check for duplicates
TYPES: BEGIN OF ty_dupl,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
slnid TYPE slnid,
END OF ty_dupl.
Get previously loaded characteristic values for internal table (CHAR)
TYPES: BEGIN OF ty_cuvtab_valc,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
valc TYPE atwrt, " Characteristic Value
END OF ty_cuvtab_valc.
Get previously loaded characteristic values for internal table (NUM)
TYPES: BEGIN OF ty_cuvtab_valn,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
val_from TYPE atflv, " Internal floating point from
END OF ty_cuvtab_valn.
Store column positions of characteristics
TYPES: BEGIN OF ty_col_pos,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Variant table name
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
field TYPE fieldname, "Field name
req TYPE char1, " Required or not
vtpos TYPE vtpos, " Item number of characteristics
END OF ty_col_pos.
Store valid values for characteristics
TYPES: BEGIN OF ty_cawn,
atinn TYPE atinn, " Internal characteristic
atzhl TYPE atzhl, " Int counter
atwrt TYPE atwrt, " Characteristic Value
atflv TYPE atflv, " Internal floating point from
lkenz TYPE lkenz, " Deletion indicator
END OF ty_cawn.
Store error messages for individual lines
TYPES: BEGIN OF ty_error,
vtnam TYPE vtnam, " Variant table name
fname TYPE fieldname, " Fieldname
atnam TYPE atnam, " Characteristic name
atwrt TYPE atwrt, " Characteristic value
row TYPE char5, " Row id
END OF ty_error.
Begin TPR# 4618
To store unique number for variant
TYPES: BEGIN OF ty_vnt_ma,
vtnam TYPE vtnam,
unique_no TYPE ZGTDM_UNQN,
no_chr TYPE ZGTDM_NO_CHR,
END OF ty_vnt_ma.
TYPES: BEGIN OF ty_dbtab,
vtint TYPE vtint,
vtnam TYPE vtnam,
DBTAB_NAME TYPE TABNAME16,
END OF ty_dbtab.
To find out concatenated number for
TYPES: BEGIN OF ty_split,
f1 TYPE char6,
END OF ty_split.
TYPES: BEGIN OF ty_charval,
char TYPE char30,
END OF ty_charval.
TYPES: BEGIN OF TY_DATA,
name TYPE string,
value(15) type c,
END OF TY_DATA.
DATA: I_DATATAB TYPE STANDARD TABLE OF TY_DATA. "#EC NEEDED
TYPES:
TUMLS_MESSTYPE type /SAPDMC/LS_MESSTYPE,
TUMLS_MESSTYPETXT type EDI_TEXT60,
TUMLS_MESSCODE type EDIPMESCOD.
TYPES:
TUMLS_TABNAME TYPE TABNAME, "#EC *
TUMLS_SEGMENT TYPE TABNAME. "#EC *
TYPES:
TUMLS_PATHFILE TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILENAME TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILETEXT TYPE /SAPDMC/LS_FILETEXT.
TYPES:
BEGIN OF type_errorline,
msgty type SYMSGTY,
id type SYMSGID,
msgno type symsgno,
par1 type symsgv,
par2 type symsgv,
par3 type symsgv,
par4 type symsgv,
END OF type_errorline.
TYPES:
type_errortab TYPE SORTED TABLE
OF type_errorline
WITH NON-UNIQUE KEY id msgno par1 par2 par3 par4.
DATA:
LV_LINE2 TYPE REF TO DATA.
GLOBAL INTERNAL TABLES
DATA : i_newinput TYPE STANDARD TABLE OF ty_newinput INITIAL SIZE 0."#EC *
DATA : i_contentheader1 TYPE STANDARD TABLE OF ty_contenthd INITIAL SIZE 0."#EC *
DATA : i_contenttab1 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab2 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab3 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab4 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab5 TYPE STANDARD TABLE OF ty_contenttab INITIAL SIZE 0."#EC *
DATA : i_E1CUV1M TYPE STANDARD TABLE OF E1CUV1M INITIAL SIZE 0."#EC *
DATA : i_errortab TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
GLOBAL WORK AREAS
**Internal Table for the structure TY_T001L
DATA : wa_vartab TYPE ty_vartab. "#EC *
DATA : wa_vartabdate TYPE ty_vartabdate. "#EC *
DATA : wa_vardetails TYPE ty_vardetails. "#EC *
DATA : wa_tabinput TYPE ty_tabinput. "#EC *
DATA : wa_dsninput TYPE ty_dsninput. "#EC *
DATA : wa_newinput TYPE ty_newinput. "#EC *
DATA : wa_gnewinput TYPE ty_newinput. "#EC *
DATA : wa_ginput_data TYPE ty_newinput. "#EC *
DATA : wa_final TYPE ty_final. "#EC *
DATA : wa_content TYPE ty_content. "#EC *
DATA : wa_contenthd TYPE ty_contenthd. "#EC *
DATA : wa_contentheader type ty_contenthd. "#EC *
DATA : wa_contenttab TYPE ty_content. "#EC *
DATA : wa_content1 TYPE ty_content. "#EC *
DATA : wa_contenthd1 TYPE ty_contenthd. "#EC *
DATA : wa_contentheader1 type ty_contenthd. "#EC *
DATA : wa_contenttab1 TYPE ty_content. "#EC *
DATA : wa_contenttab2 TYPE ty_content. "#EC *
DATA : wa_contenttab3 TYPE ty_content. "#EC *
DATA : wa_contenttab4 TYPE ty_content. "#EC *
DATA : wa_contenttab5 TYPE ty_contentTAB. "#EC *
DATA : wa_E1CUVTM TYPE E1CUVTM. "#EC *
DATA : wa_E1CUV1M TYPE E1CUV1M. "#EC *
DATA : wa_E1DATEM TYPE E1DATEM. "#EC *
DATA : wa_error_tab TYPE solisti1. "#EC *
INTERNAL TABLES AND WORK AREAS FOR BDC
*Internal Table to store the data to display the error message
DATA : i_errormsg TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
*Internal Table to store the data to display the error message
DATA : i_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
DATA : itab_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
**Work area to store the data to display the error message
DATA : wa_errormsg TYPE solisti1. "#EC *
**Internal table which will store data for the error log
DATA:i_error_log TYPE STANDARD TABLE OF ty_error_log INITIAL SIZE 0."#EC *
GLOBAL VARIABLES
DATA: G_FILE TYPE string. "#EC *
DATA : g_ctr_input_recs(5) type c. "#EC *
DATA: g_ctr_output_recs(5) type p. "#EC *
data : g_msg(100) type c. "#EC *
data: g_struct_file TYPE string. "#EC *
data: g_login type FILEINTERN. "#EC *
data: g_phyin type string. "#EC *
DATA: g_lprnt type RSPOPSHORT. "#EC *
DATA: g_FNAME1 TYPE STRING. "#EC *
DATA : g_repid TYPE repid, "#EC *
g_exit(1) TYPE C, "#EC *
gx_variant type disvariant. "#EC *
DATA : g_lines TYPE i . "#EC *
data : g_save(1) type c. "#EC *
DATA : g_splid TYPE rspoid . "#EC *
data: p_login type FILEINTERN. "#EC *
data: p_phyin type string. "#EC *
GLOBAL CONSTANTS
CONSTANTS c_msgar TYPE rslgarea VALUE 'F8'. "#EC *
CONSTANTS c_msgid TYPE rslgsubid VALUE 'E'. "#EC *
CONSTANTS c_urgnc TYPE char04 VALUE 'HIGH'. "#EC *
CONSTANTS C_X(1) TYPE C VALUE 'X'. "#EC *
CONSTANTS C_Y(1) TYPE C VALUE 'Y'. "#EC *
CONSTANTS C_Z(1) TYPE C VALUE 'Z'. "#EC *
CONSTANTS C_E(1) TYPE C VALUE 'E'. "#EC *
CONSTANTS C_SAP(3) TYPE C VALUE 'SAP'. "#EC *
CONSTANTS C_MOD(3) TYPE C VALUE 'MOD'. "#EC *
CONSTANTS C_MD1(3) TYPE C VALUE 'MD1'. "#EC *
CONSTANTS C_MD2(3) TYPE C VALUE 'MD2'. "#EC *
CONSTANTS C_MD3(3) TYPE C VALUE 'MD3'. "#EC *
CONSTANTS C_MD4(3) TYPE C VALUE 'MD4'. "#EC *
CONSTANTS C_MD5(3) TYPE C VALUE 'MD5'. "#EC *
constants: c_000001(6) type c value '000001', "#EC *
c_e1cuv1m(7) type c value 'E1CUV1M', "#EC *
c_02(2) type c value '02', "#EC *
c_009(3) type c value '009', "#EC *
c_0001(4) type c value '0001'. "#EC *
constants: c_e1datem(7) type c value 'E1DATEM'. "#EC *
constants: c_e1cuvtm(7) type c value 'E1CUVTM'. "#EC *
GLOBAL INTERNAL TABLES FOR ALV DISPLAY
*Internal tables for ALV Field cat
DATA :
i_fieldcat_ov TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_dtl TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_ov1 TYPE lvc_t_fcat, "#EC *
i_events TYPE slis_t_event. "#EC *
GLOBAL WORK AREAS FOR ALV DISPLAY
*Work area for ALV Field layout
DATA : wa_layout TYPE slis_layout_alv. "#EC *
*Work area for Field Cat. Table
DATA : wa_fieldcat TYPE slis_fieldcat_alv. "#EC *
GLOBAL VARIABLES FOR ALV DISPLAY
DATA : g_event TYPE slis_t_event. "#EC *
DATA : g_top_of_page TYPE slis_t_listheader. "#EC *
DATA : g_ok_code TYPE char4. "#EC *
DATA : g_variant type disvariant. "#EC *
GLOBAL CONSTANTS FOR ALV DISPLAY
BAL handling
data: iv_log_handle type BALLOGHNDL. "#EC *
data: is_log_header type bal_s_log. "#EC *
data: iv_object type bal_s_log-object value 'CAPI'. "#EC *
data: iv_subobject type bal_s_log-subobject value 'CAPI_LOG'."#EC *
data: iv_tcode type bal_s_log-altcode value 'SE38'. "#EC *
*MOD-005
RANGES:
R_MESTYP FOR EDIDC-MESTYP, "#EC *
R_CREDAT FOR EDIDC-CREDAT, "#EC *
R_CRETIM FOR EDIDC-CRETIM, "#EC *
R_SNDPRT FOR EDIDC-SNDPRT, "#EC *
R_SNDPRN FOR EDIDC-SNDPRN. "#EC *
DATA:
L_MESSTYPE TYPE TUMLS_MESSTYPE. "#EC *
*MOD-005
data: p_sndprn TYPE EDI_SNDPRN, "#EC *
p_sndprt TYPE EDI_SNDPRT, "#EC *
p_sndpor TYPE EDI_SNDPOR. "#EC *
data: p_rcvprn TYPE EDI_RCVPRN, "#EC *
p_rcvprt TYPE EDI_RCVPRT, "#EC *
p_rcvpor TYPE EDI_RCVPOR. "#EC *
data:
init_E1CUVTM type E1CUVTM, "#EC *
prev_E1CUVTM type E1CUVTM, "#EC *
init_E1DATEM type E1DATEM, "#EC *
prev_E1DATEM type E1DATEM, "#EC *
init_E1CUV1M type E1CUV1M, "#EC *
prev_E1CUV1M type E1CUV1M. "#EC *
Source structure definitions
data:
begin of LSMW_TAB_CONTENT, "#EC *
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
end of LSMW_TAB_CONTENT.
Counters
data:
g_cnt_VAR_TAB type i, "#EC *
g_cnt_TAB_CONTENT type i. "#EC *
Counter ct_xxxxxxxxxx: number of transferred records
data:
ct_edi_dc40 type i, "#EC *
cs_edi_dc40 type i, "#EC *
ct_E1CUVTM type i, "#EC *
cs_E1CUVTM type i, "#EC *
ct_E1DATEM type i, "#EC *
cs_E1DATEM type i, "#EC *
ct_E1CUV1M type i, "#EC *
cs_E1CUV1M type i. "#EC *
Global data definitions and data declarations
DATA: wa_cabn TYPE ty_cabn,
wa_cawn TYPE ty_cawn,
wa_file TYPE ty_file,
wa_vtnam TYPE ty_vtnam,
wa_cuvtab_fld TYPE ty_cuvtab_fld,
wa_cuvtab_valn TYPE ty_cuvtab_valn,
wa_cuvtab_valc TYPE ty_cuvtab_valc,
wa_col_pos TYPE ty_col_pos,
wa_error TYPE ty_error,
wa_dupl TYPE ty_dupl,
wa_dupl_file TYPE ty_dupl.
DATA: wa_vnt_ma TYPE ty_vnt_ma,
wa_split TYPE ty_split.
DATA: wa_charval TYPE ty_charval. "#EC *
Internal table
DATA: i_cabn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_temp TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_atinn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_file TYPE STANDARD TABLE OF ty_file, "#EC *
i_file_tmp TYPE STANDARD TABLE OF ty_file, "#EC *
i_vtnam TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab_fld TYPE STANDARD TABLE OF ty_cuvtab_fld, "#EC *
i_cuvtab_valn TYPE STANDARD TABLE OF ty_cuvtab_valn, "#EC *
i_cuvtab_valc TYPE STANDARD TABLE OF ty_cuvtab_valc, "#EC *
i_col_pos TYPE STANDARD TABLE OF ty_col_pos, "#EC *
i_cawn TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_n TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_c TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_i TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cuv_error TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_dupl TYPE STANDARD TABLE OF ty_dupl, "#EC *
i_dbtab TYPE STANDARD TABLE OF ty_dbtab. "#EC *
DATA: i_vnt_ma TYPE STANDARD TABLE OF ty_vnt_ma, "#EC *
i_split TYPE STANDARD TABLE OF ty_split. "#EC *
DATA: i_dupl_file TYPE STANDARD TABLE OF ty_dupl. "#EC *
DATA: i_charval TYPE STANDARD TABLE OF ty_charval. "#EC *
Constants
CONSTANTS: c_char TYPE atfor VALUE 'CHAR', "#EC *
c_date TYPE atfor VALUE 'DATE', "#EC *
c_time TYPE atfor VALUE 'TIME', "#EC *
c_varcond TYPE atnam VALUE 'Z_VARCOND'. "#EC *
Field Symbols
FIELD-SYMBOLS: <fs_vtnam> TYPE ty_vtnam, "#EC *
<fs_cabn> TYPE ty_cabn, "#EC *
<fs_cuvtab_fld> TYPE ty_cuvtab_fld, "#EC *
<fs_dupl> TYPE ty_dupl. "#EC *
FIELD-SYMBOLS: <FS_DYN_WA> TYPE ANY.
Variables
DATA: g_raw(500) TYPE c, "#EC *
g_invalid TYPE char1, "#EC *
g_error TYPE char1, "#EC *
g_message TYPE char50, "#EC *
g_slnid_c TYPE slnid, "#EC *
g_slnid_n TYPE slnid, "#EC *
g_row TYPE char5. "#EC *
DATA: g_varcond TYPE varcond, "Variant condition "#EC NEEDED
g_split_var TYPE i, "#EC *
g_split_var1 type i. "#EC *
Types: begin of ty_charname,
name type atnam,
end of ty_charname.
data: wa_charname type ty_charname, "#EC *
i_charname type standard table of ty_charname. "#EC *
data: cnt_i type i, "#EC *
g_tabix type char10. "#EC *
Types: begin of ty_itab_zedidc40.
include structure edi_dc40.
TYPES: end of ty_itab_zedidc40.
Types: begin of ty_itab_zedidd40.
include structure edi_dd40.
TYPES: end of ty_itab_zedidd40.
DATA: itab_zedidc40 type standard table of
ty_itab_zedidc40 initial size 0. "#EC *
DATA: itab_zedidd40 type standard table of
ty_itab_zedidd40 initial size 0. "#EC *
DATA: wa_itab_zedidc40 type ty_itab_zedidc40. "#EC NEEDED
DATA: wa_itab_zedidd40 type ty_itab_zedidd40.
*MOD-009
data: itab_ze1cuvtm type e1cuvtm, "#EC *
itab_ze1datem type e1datem, "#EC *
itab_ze1cuv1m type e1cuv1m. "#EC *
data: wdocnum(16) type n value 0. "#EC *
data: wsegnum(6) type n value 0. "#EC *
data: witemno(10) type n value 0. "#EC *
data: witemno_new(10) type n value 0. "#EC *
data: witemno_gst(10) type n value 0. "#EC *
data: witemno_qst(10) type n value 0. "#EC *
TYPES: BEGIN OF ty_input_data1, "#EC *
line(560) type c,
flag(1) type c,
END OF ty_input_data1.
DATA: i_input_data type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: i_input_data1 type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: wa_input_data type ty_input_data1. "#EC *
DATA: g_cnt_input_recs type i. "#EC *
DATA: g_flg_error type c. "#EC *
DATA: l_lines type i. "#EC *
DATA: l_lines1 type i. "#EC *
DATA: l_tabix type i. "#EC *
DATA: wa_input_data1 type ty_input_data1. "#EC *
DATA: FILE TYPE STRING.
Fields that are made available to the user:
DATA:
g_cnt_records_read TYPE i, "#EC *
g_cnt_records_transferred TYPE i, "#EC *
g_cnt_transactions_read TYPE i, "#EC *
g_cnt_transactions_transferred TYPE i, "#EC *
g_cnt_idocs_package TYPE i. "#EC *
data: v_log_handle type balloghndl. "#EC *
DATA: gt_curr_edi_dc40 TYPE STANDARD TABLE OF edi_dc40 initial size 0."#EC *
DATA: gt_curr_edi_dd40 TYPE STANDARD TABLE OF edi_dd40 initial size 0."#EC *
DATA: wa_curr_edi_dc40 TYPE edi_dc40. "#EC *
DATA: wa_curr_edi_dd40 TYPE edi_dd40. "#EC *
internal table for error messages during conversion
DATA: g_error_tab TYPE type_errortab, "#EC *
wa_errortab TYPE type_errorline. "#EC *
DATA: g_edidd_segnam type EDI4SEGNAM, "#EC *
g_edidd_hlevel type EDI4HLEVEC. "#EC *
DATA: g_segnum(6) TYPE n.
DATA: g_objecttype(2) type C.
DATA: P_FNAME(128) TYPE C VALUE '/usr/sap/trans/vartabheader'. " MODIF ID MD1 OBLIGATORY.
DATA: P_FNAME1(128) TYPE C VALUE '/usr/sap/trans/vartabcontent'. " MODIF ID MD1 OBLIGATORY.
field-symbols: <dyn_table> type standard table,
<dyn_table1> type standard table,
<dyn_wa>,
<dyn_wa1> TYPE ANY.
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
data: l_tabname TYPE tabname.
DATA: l_len_slnid TYPE i, "#EC NEEDED
l_len_varcond TYPE i, "#EC NEEDED
l_temp_slnid TYPE i, "#EC NEEDED
l_temp_slnc TYPE char5, "#EC NEEDED
l_temp_varcond TYPE varcond, "#EC NEEDED
l_sub_var TYPE i, "#EC NEEDED
l_val_split TYPE char10. "#EC NEEDED
DATA: l_invalid. "#EC NEEDED
*Include for Global Data Declaration
*INCLUDE ZGTDMI_VARTAB_TOPDYN.
*INCLUDE /FACTGLB/GTDMI_VARTAB_TOP02.
*Include for Selection Screen
*INCLUDE ZGTDMI_VARTAB_SELDYN.
*INCLUDE /FACTGLB/GTDMI_VARTAB_SEL02.
*Include for Sub Routines
*INCLUDE ZGTDMI_VARTAB_FORMSDYN.
*INCLUDE /FACTGLB/GTDMI_VARTAB_FORMS02.
*& Include /FACTGLB/GTDMI_VARTAB_SEL02 *
*& Include /FACTGLB/GTDMI_VARTAB_SEL
*& Include /FACTGLB/GTDMI_VARTAB_SEL
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-08-25
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
DECLARATION FOR SELECTION SCREEN
*selection-screen skip 1.
*For all the input field entries
SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
*Parameter for Input File Name:
PARAMETERS: p_inpt TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File Variant table
PARAMETERS: p_inpt1 TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File variant Content
SELECTION-SCREEN END OF BLOCK bl1.
IDoc creation
selection-screen begin of block idocpars
with frame title text-006.
parameters:
p_trfcpt as checkbox default C_X MODIF ID MD3,
p_packge(5) type n default 1 MODIF ID MD3.
selection-screen end of block idocpars.
SELECTION-SCREEN BEGIN OF BLOCK bl3 WITH FRAME TITLE text-032.
Radio Buttons :
parameters:
rb_apsrv RADIOBUTTON GROUP RB1 DEFAULT 'X' USER-COMMAND UCOM,
rb_convt RADIOBUTTON GROUP RB1,
rb_idoc RADIOBUTTON GROUP RB1.
rb_proc RADIOBUTTON GROUP RB1.
SELECTION-SCREEN END OF BLOCK bl3.
INITIALIZATION
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_INPT.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = C_X
CHANGING
FILE_NAME = P_INPT
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE e241.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_INPT1.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = C_X
CHANGING
FILE_NAME = P_INPT1
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
-
File structure and hierarchy in Aperture.
Hi, everyone.
I am trying to import folders with images into Aperture and, much to my surprise, have found that this process is everyting but intuitive and straightforward.
My library (outside of Aperture) is made up of folders each corresponding to a day and location. These folders are labeled using the data and location as part of their name.
As I try to import these folders into Aperture I can't seem to import them into a single folder or project as sub-folders or sub-domains of that project. I have tried to create a project and them import the folders into it but Aperture won't import them into that project and doesn't allow me to drag and drop it either once it has been imported. I also tried to create albums and folders but haven't been successful.
How does this file structure in Aperture work in terms of hierarchy ? It certainly isn't structured the way the Finder is or any other file system I have seen to date. Creating folders, organizing them and bringing any type of data into these folders should be a simple process but in Aperture it doesn't seem to be.
Am I doing something wrong or is Aperture trying to re-invent the wheel ?
Is there any tutorial I can watch or read on how to work with Aperture's file structure and import folders and folders into it ?
Thank you in advance.Regarding your specific problem I suggest treating each existing dated folder of image files as a single Project in Aperture. In Aperture a Project is a specific time-based concept that may or may not jive with what you previously considered a project. For instance I may have in my mind that shooting all the highest peaks in every state is a "project," but that would be inappropriate as an Aperture Project. Instead each peak might be a Project, but the pix of all the peaks would be pointed to as an Album.
The way I look at it conceptually:
Aperture is a database (DB), and each image file lives in one Project.
Albums are just collections of Pointers that point to individual image files living in one or more Projects. Since they just contain pointers, albums can be created or deleted at will without affecting image files. Very powerful. And Albums of pointers take up almost zero space, so they are fast and do not make the Library size grow.
Keywords can be applied to every image separately or in batches. Keywords are hugely powerful and largely obviate the need for folders. Not that we should never use folders, just that we should use folders only when useful organizationally - - after first determining that using keywords and albums is not a better approach.
As one example imagine the keyword "flowers." Every image of a 100,000 images Library that has some flowers in it has the keyword flowers. Then say we want to put flowers in an ad, or as background for a show of some kind, or to print pix for a party, or even just to look for an image for some other reason. We can find every flower image in a 100k-image database in 2 seconds, and in another few seconds create an Album called "Flowers" that points to all of those individual images.
Similarly all family pix can have a keyword "family" and all work pix can have a key word "work." Each individual pic may have any number of keywords. Such pic characteristics (work, family, flowers, etc.) should not be organized via folders.
So by using keywords and albums we can have instant access to every image everywhere, very cool. And keywords and albums essentially take up no space in the database.
Another approach is to use a folder "Family" for family pix, a folder "Flowers" for flowers pix and another folder "Work" for work pix. IMO such folders usage is a very poor approach to using an images database (probably stemming from old paper or film work practices). Note that one cannot put an image with family in a field of flowers at a work picnic in all three folders; but it is instant with keywords.
HTH
-Allen
Maybe you are looking for
-
ITunes thinks my 8 year old iPod classic is brand new??!
Hi, Can anyone help with this please? I've tried two different PCs and keep having the same issue, my only option is to click continue and really dont want to do this incase I lose all my music. I've no idea if set to backup automatically but if th
-
Hi Please help! I have a page which has an sql statement to show me the records from the last 100 days. SELECT tblItems.intItemID, tblItems.txtProductCode, tblItems.txtModel, tblItems.memDescription, tblItems.dteDateIn, tblItems.txtSalesPrice, tblIte
-
Buyer changed Promised should not reflect in supplier portal.
Hi, I am creating a PO with NBD to D30 and promised date (NBD - Transit time) to D25 and approve it. Now this PO goes to supplier through iSupplier. Supplier changes the date to D40 as new promised date. This goes back to Buyer and Buyer changes the
-
ORA-01109:database not open, how to solve this problem please give me steps.
-
In Task AutoAssignment no LOV found in Default Tasks
Hi, In Project Manafacturing N:Project Parameters->Project->Tab->Task AutoAssignment->In Default Task no LOV found in Material, Resource & WIP Material. Project is already defined. Can anybody help me for the solution. Thanks Regards GSM