Maintain Audio Pitch Doesn't work

Hi,
My Maintain audio pitch doesn't work (prem CS5 5.0.3 + Mac pro).
A basic speed change with audio works fine but not with MAP selected.
Anyone else know about this issue?

I'm looking at possibly buying Premiere and this feature is very important to me. Was this problem ever corrected?

Similar Messages

Maintain Audio Pitch doesn't work correctly.

Ok,
After a long series of issues and tech support calls with CS4 I have a new gremlin to deal with. Maintain Audio Pitch, which previously worked great on my XP Pro with premiere Pro 2.0 now just heavily distorts the audio. This problem is on my new Vista Ultimate 64-bit power house of a computer using CS4. What actually happens, is hard to explain this accurately. Imagine talking into a tin can then add a kind of vibrato distortion and then degrade it's over all quality. What once would come out damn near perfect is now heavily unacceptably distorted. The source doesn't seem to matter. It messes up both Microsoft DV AVI audio as well as WAV files. The current issue has to do with me trying to pitch correct a file at 97% speed. That's 97%! In Pro 2.0 I could correct down to around 78% without too much distortion. This just doesn't make any since. All my drivers are updated, yes I uninstalled and reinstalled QuickTime (that's what was crashing media encoder a while back) and yes I have the update 4.0.1
If anyone has any ideas on how to fix this, please let me know. I'm confused and have no idea how to approach this. I've done multiple searches expecting someone else to have this issue and have thus far (4+ hours in) have come up empty handed.
Signed,
William A. McDonald

I'm looking at possibly buying Premiere and this feature is very important to me. Was this problem ever corrected?

I Mac(OS 10.6.5) Core Audio MIDI doesn't work

I just bought iMac. Problem is Core Audio/MIDI doesn't work at all.
I installed Logic Studio, Battery..but none of them working with MIDI interface.
When I worked with Macbook(OS 10.5) before, there was no problem at all.
I Used Mbox2 for audio interface and mic pre, and master keyboard with USB port as MIDI device.
Now I can't work at all with my music project because of audio/MIDI problem.
I tried to fix it opening Audio MIDI setup but I only get the message saying..
"Required Software extensions are missing"
and when I go to the the page after clicking OK, then it says that I need to get supported by software company for upgrade, which I have the latest version...
also I get the message "Core MIDI quits unexpectedly...".
These two message pop up every time I open Logic Studio too.
I hope solution for this matter.
I really need to focus on producing my music...

So, after long work around which failed this is how i made it work!
I think the problem is the latest update of the system (10.6.5) I am back now on 10.6.2 and all is fine : this is how i managed it based on the fact that the whole thing was working fine on my MBP.
1. download a copy of SuperDuper from the net
2.Open MBP and then firewire Target mode the iMac to the MBP
3. with the SuperDuper clone the Hard disk of the MBP to the iMac
This will erase all on your iMac and make its hard disc exactly the same as the MBP; it also makes it bootable.
4.open iMac alone
5. insert the original system dvd for the iMac and install the SnowLeopard system BUT DO NOT UPGRADE
6.restart as demanded and you should be on 10.6.2
with your desktop and hard disk running exactly as it was on your MBP
7 when opening Logic (or the other pro apps like FCStudio pro then you will be asked for your serial numbers which it duly accepts
8. all then should be running fine
Total time depends on size of your MBP hard disk (for me it took c. 3 hours including the reinstall 10.6.2) but all is now as it should be

Captivate 8 vs yosemite. Audio speech doesn't work neither on Captivate 7 nor Captivate 8. Is there any bug to fix this problem?

I'm having problems when using Captivate 7 and 8 - specially audio speech management.
As I use OSX Yosemite, I don't know why but it doesn't work properly.
Any bug or way to fix this problem?
Thanks in advance.

Captivate for yosemite is all around really buggy. I also cant get text to speech to work, but I am experiencing issues with what I call "windowing". When I attempted to maximize captivate 8 to my cinema display, menus and modal windows spawned by captivate often appear behind other windows. In addition, Captivate can't seem to figure out how to maximize to the available screen real estate.
These two things happen to be the most annoying bugs, but I have experienced many more:
1.Timeline is really wonky. I can't select multiple timeline items and move them without the timeline completely falling apart.
2. Selecting objects that are overlapping on the stage is terrrible
3. Altering the duration that an item should appear in the timeline often creates an extremely annoying bug where other timeline items will jump to an arbitrary spot. This creates a ton of re-work.
Adobe - Cap 8 is not ready for use in OSX Yosemite- please fix it!

Quad G5 Audio In doesn't work

Neither the external iSight nor analog mic input doesn't work. Both devices work fine on the laptop. No way of telling if the optical input works. Removed audio pref and there was a brief indication (input LED was stuck at some levels, not the usual dead silence), Re-installed OS, nothing... Changed iSight's FW ports to the rear, front and thru the hub. Nothing.
Due to the input failure, iChat fails to initiate on video/audio chat.
Any suggestions?
thanks,
chris
Quad 2.5, PB G4 1.5 Mac OS X (10.4.3) 6.5GB, Cinema Display, CRT

Hmmm maybe some kind of audio card/software your using is not ready for the Quad yet?
Hate to say it but before calling Apple do a clone, Disk utility Erase w/zero option and a fresh install of Tiger>update, Fresh apps, no migration assistant. files from the clone.
http://homepage.mac.com/hogfish
Then you can at least rule out a software problem and get right to having Apple fix the hardware issue.
Did you option boot from the install disk and run AHT extended tests yet?
btw, this "Apple Discussions" server response is very very slow...
Sometimes it's their servers or the 'net, check both machines, if it's just the Quad either it's a slow 250/500 GB boot drive filled up or a OS problem.
If the OS reinstall doesn't speed things up (on broadband right?) you might want to look at getting a fast boot drive and keeping it slim, read my performance info at my site.
Western Digital is coming out with a 150 GB 10,000 RPM Raptor X which would make a sweet boot drive.
(no comp for product mention, just performance interest)

Play audio action doesn't work in Captivate 7

Hi,
On the first slide of my course I added a "quick start" guide. It consists of a series of captions containing text. In each caption there's a "Continue" text link triggering an advanced action to hide the current caption and show the next one. This works perfectly.
Now I wanted to attach audio to each step of the guide. I added a "play audio" action after the show/hide actions for the first step. No audio was playing. When I changed the play audio to be the first action in the script - the script didn't work at all. When I changed it to be between the hide and show, the hide worked and show didn't. What I understand from this is that play audio doesn't work and also halts the whole thing.
Any advice?
Thanks

Just checked it out, created a shared action with almost exactly the same commands, but grouped all the text containers in one group Gr_TC
to hide:
It worked perfectly. You don't see a label, because it is a shared action, for which I just filled in some parameters. Attached it to three buttons, had 3 text containers and 3 different audio clips.
Is the audio clip playing when you use it in another way? The only difference seems to be that you have a VO clip and I used one of the included sounds with Captivate.
Another way could be to attach the audio to the text container as object audio. Once you show the text, audio will play, when you hide the text it will stop. That was the way to go before CP6:
http://blog.lilybiri.com/playtime-with-audio-and-widgets
Lilybiri

Has anyone at apple ever heard of regression testing? ATV audio still doesn't work on 4.3.3

I really don't think that there are any software validation principles in place at apple because my Apple TV has now been unusable for over a month due to all of these failed software updates. Upgraded to 4.3.3 yesterday and it didn't resolve any of my audio issues. I am using a DVI connection with optical audio out. No audio on every 4.3 update. I can get broken audio on the latest update (4.3.3) if I crank my receiver up to 50. Used to get loud audio on my receiver set to 20.
If anyone is actually testing this software using any known software validation principles, it would amaze me. Someone needs to give me my money back for this black boat anchor.

Alley_Cat wrote:
this support note indirectly suggests it should work with HDCP enabled DVI adapters:
http://support.apple.com/kb/HT4428
Specifically, the last section:
Additional Information
Even if your HDTV supports HDCP, you may still experience HDCP related issues when connecting your Apple TV (2nd generation) to your HDTV if:
You have connected your Apple TV to a HDMI-to-DVI adapter that does not support HDCP
You have connected your Apple TV to your TV using a HDMI cable that does not support HDCP
You have connected your Apple TV to your TV via an AV receiver that does not support HDCP
You have connected your Apple TV to a HDMI hub, switch, scaler, or extender that does not support HDCP
None of that is surprising at all. It's what I meant when I said it would be "unfathomable" to assume DVI wouldn't work when HDCP is supported. It would actually require extreme negligence or malice to create a device where DVI doesn't work, hence "unfathomable".
I don't even know where to buy an HDMI<->DVI adapter or cable that doesn't support HDCP. The straight-through $2 adapters and $5 cables from places like Monoprice.com work perfectly and "support" HDCP. I know this because I've used both. ETA: I put "support" in quotes because it's wrong to emphasize this as some special quality that might be hard to find or expensive. You'd have to actively seek out an adapter or cable that does not "support" HDCP.

Copy/Paste Audio Configuration doesn't work for me. What am I doing wrong?

I've read all the other threads on this topic. Some say you have to save before you copy, etc., but nothing works for me. I open up a Logic song that has various Audio tracks, Aux tracks, and VI tracks. I open the Mixer and select Copy Audio Configuration. I close the project file, open up a new blank file, open the Mixer and hit Paste Audio Configuration. The only thing that happens is a single empty track gets pasted, that's it. This couldn't be broken in 8.01 AND 8.02, could it? Tell me I'm doing something wrong, please.

Hi,
if you want to copy the actual channel strips, you need to go to the Environment window, select them, press copy, and paste them into the Environment window of the other song.
Audio configuration doesn't equal channel strips, but refers to how these channel stripes are configured (eg. which plugins they use).
Or you could create the audio objects (channel strips) you need to use in the new song manually, and then copy the audio configuration, because then that copy/paste process would have some objects to paste the configuration into.
You could probably even create the audio objects after you have pasted over the configuration, but I haven't checked if this works.

Captivate 8: audio file doesn't work when I add it to an object slide

Hi everyone,
I have problems with the audio in Captivate 8. This doesn't work when I press an object slide (button) that has an audio file incorporated. This issue doesn't happen when I add sound to an individual slide.
I have tried to fix the problem by changing the preferences, but nothing
Any suggestion is welcomed!!
Evelyn

An audio file that is attached to an object or a slide, will play when that object or slide become visible. I don't know what you mean by 'has an audio file incorporated'? Do you mean that it is attached to the button in its audio part of the Properties, which is in the Options tab? In that case the audio will just play when that button gets visible, if it is at the start of a slide, audio will play at the start of that slide.
If you want an audio clip to play only when a button is clicked, you need to use an action 'Play audio', or make an audio object visible.
Audio Objects: Control them! - Captivate blog
Beware: if you do this with a simple action triggered by the button, the playhead will be released if that button has a pausing point.

Usb Audio Codec doesn't work

A few days ago I bought an USB Microphone (Samson G-Track). I don't know why It doesn't work. When I select in Sound/Preferences/Input the "Usb Audio Codec" but It says that there aren't input controls in the device. I tested it at Garage Band but It didn't work. I thought that the mic was defective but when I tested it in my mother's pc (Vista) It worked.
What can I do?
Thank you.

But this mic is for Mac too. It's says that you "plug and play". I bought this microphone to record my music work at home.
This is the website, It says that works fine with Garage Band but ...
http://www.samsontech.com/products/productpage.cfm?prodID=1917
*My english is not very good, I'm Spanish.
Thank you!

Audio output doesn't work right. How to fix it?

I plugged my earphones in and noticed that the left side was much louder than the right. I tried different earphones and and it works fine on my iphone so it definately is the plug in of my mac that now doesn't work properly anymore

What did you do, before this happened? Did you install new software? Update the system?
Have you tried to restart the iPhoneor to reset the iPhone? See: reset your device
http://support.apple.com/kb/TS3281
If that does not help, restore the device: restoring iOS software

When I double click home for audio playback doesn't work for movies since I synced it yesterday Why?

When I double click the home button the audioplayback doesn't work for movies, it did before I added and synced some items yesterday anybody know why?

Jeanlewane wrote:
Why, When I double click the home button and hold down the icon waiting for the red x to appear, it doesn't.?
How to Close Apps
Double Tap the Home Button... Then swipe the App (not the icon) Upwards... Tap the Home Button when finished.
From Here > http://support.apple.com/kb/HT4211
NOTE: You cannot delete any pre-installed iOS app.

Audio driver doesn't work for my compaq presario r4000 notebook XP system

Hello,
I just reinstall Window XP on my compaq presario r4000 notebook, and I download
all the drivers from HpCompaq offical website. But the audio driver
does't work for my "Conexant AC-Link Audio
(PCI\VEN_1002&DEV_4370&SUBSYS_3085103C&REV_01\3&13C0B0C5&0&A5)".
Please help me to figure it out.
Thanks!!
This question was solved.
View Solution.

OK...
Now we have to get creative!
Download and install the free 7-Zip utility.
http://7-zip.en.softonic.com/
Download this driver:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=ob-317...
Decompress driver audio Conexant CX20468-31 AC97 and Equalizer with the 7-Zip software.
Once installed, do a right click on the file sp30578.exe, select 7-Zip/extract the files and then click OK.
Force the installation of the driver manually:
In the device manager, right click on the audio controller, and select Update driver.
Select install from a list or specific location Do not search. I will choose the driver to install.
Click on next, Have Disk, and browse.
Select the cpl3085a.inf file in the uncompressed folder sp30578, and then click Open.
Click on OK, next and finish.
Restart the computer.
Paul

Beats audio equalizer doesn't work

i've installed last driver for my laptop dv6 6b54er win8 pro x64 and equalizer (at the screenshot) doesn't work! Help me please!

Hi,
Where do you download the driver ? Please try this fix:
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Exporting to QT on Keynote with embedded narration or audio files doesn't work

When I create a Keynote presentation, I often publish them for viewing after the presenttion. I have been making presentations for a long time and never had luck with Keynote using narration. When you edit a narration, it first "appears" to erase everything from the point you choose to edit forward.   However, when you finalize the presentation and export to QT as a movie (yes the edits sound fine when you are using keynote itself) EVERY PREVIOUSLY RECORDED TAKE on each slide will playback at the same time making the audio incomprehensible. I'm using a 2013 2.3 GHz quad core i7 with 16 GB DDR3 and the newest Keynote 6.01 2013.   Narration has NEVER worked properly on any previous version, and still doesn't.
I had some advice to try recording QT audio and adding to the slide. Now, when recording to Quicktime, it does embed it, but in recording the presentation, it either doubles up the audio giving a strange echo or does the same thing if you ever edit the presentation.
Keynote is simply a buggy inferior product for use in recording presentations as far as I am concerned, and I am very very disappointed in Apple for not figuring these issues out.   It's not a new product, and it's not as if most educators are not participating in on-line posting or sharing their work as movies for later viewing by students.
I'd appreciate hearing what others do to work around these issues before heading back to Powerpoint or having to make complex i Movies with slides as images and adding qt narration to the movies.   Keynote claims to do this... it just but I've never encountered an apple product with more bugs.

I had some advice to try recording QT audio and adding to the slide. Now, when recording to Quicktime, it does embed it, but in recording the presentation, it either doubles up the audio giving a strange echo or does the same thing if you ever edit the presentation.
The problem Keynote has is that the sound and image content are not locked together which causes out of sync errors. This is why many users choose video editing applications when using sound in the presentations, as they have both image and audio tracks to sync sound properly together.
Start a new presentation to remove the previous sound recording, Keynote is holding onto the other sound files.
Add the graphic items to each slide and one sound file to each slide for the voice over
1 - In Inspector > Transitions; use start transitions automatically and set each transitions delay to the duration of the individual sound file.
2 - In QT export, set Fixed Timing and delete the value in the duration box, QT will then use the custom timings for each individual slide.
This procedure does work exactly as needed, Iv used this for nearly 6 years using 4 different versions of Keynote.

Maintain Audio Pitch Doesn't work

Similar Messages

Maybe you are looking for