Maintain Bank Chain (FIBPU) in ECC via IDOC

Hi,
I'm looking to maintain Bank Chain outside of SAP and interface into ECC 6.0 via IDOC.  Does anyone know if an IDOC exist for Bank Chain?
Maintain Bank Chain: txn FIBPU; program RFBLBC02
Other options would be 1) to write custom interface and utilize BDC, 2) to maintain directly in ECC, but ideally would prefer standard interface if available.
Any suggestions would be much appreciated.
Thanks,
Susan

HI,
regarding your missing IBAN proposal number, check SAPNET note 634191, maybe the proposed value is suppressed.
Best regards, Christian

Similar Messages

  • Bank chain details in REGUH via F110

    Hi guys,
    where does the bank chain details in REGUH table via F110 are coming from?
    Thanks a lot!
    Rgds,
    Mark

    Hi Mark,
    I am sorry for not understanding your query completely, as your first query is somewhat different than the recent one. However, if the question is for Configuring, you can do that from the following path :
    Financial Accounting -> Bank Accounting -> Define Scenario (TCode FIBC)
    Then Activate the Bank Chain. Please check this path and go through the IMG Activity Documentation for more details.
    Please let me know, if I am mistaken.
    Thank you.
    Suresh Jayanthi.

  • IBAN number not getting updated in ECC via IDOC CREMAS05

    Hi Experts
    We have a business scenario where the vendor is created in MDM and the data is sent to PI from where the IDOC posts vendor master details  to relevant tables in ECC.
    The IBAN information is provided in the IDoc in segment E1LFBKM-IBAN. However this IBAN datail is not getting updated in the Vendor master.All other bank data : Bank key, Account number, Bank Name, Country Key, Control Key are all getting updated except the IBAN number information.
    I have searched a lot in all the forums but could not find a solution to this. I have checked and dont seem to miss any configuration.Another strange thing is normally when doing XK02 the system proposes an IBAN number if the field is not updated on the basis of Bank Key, Country Key and account number - this is also not happening in my case.
    Please advise.
    Thanks in Advance
    Varun

    HI,
    regarding your missing IBAN proposal number, check SAPNET note 634191, maybe the proposed value is suppressed.
    Best regards, Christian

  • Sap bank chains

    Hi
    The steps I configured for SAP bank chains
    1) Define scenario
    2)Activate the bank chain
    3)Define the business partner specific bank chain(FIBPU)
    Still the payment program is not considering the bank chain while executing the F110
    Please let me know the reason.
    Regards
    Hashmathulla

    YES
    Edited by: hashmath ulla on Mar 12, 2009 11:05 AM

  • How to transfer data from ECC to CRM via IDocs (Clfmas01),

    Hi all,
    how to transfer data from ECC to CRM via IDocs (Clfmas01), that to material master data from ECC to Production master data in CRM.    
    Need Information regarding, how to upload file to CRM from ECC, through, IDocs......Plz help me...
    Edited by: khaja fareed on Jan 11, 2010 12:44 PM

    First of all push ECC data in to GTS server through T.code:/N/SAPSLL/MENU_LEGALR3. First click on Master data tab there enter customer/vendor number then execute.
    2-Go to document tab there enter Sales order no/PO number then execute it.
    Then go to GTS server in compliance management module you can get all the information.
    Regards
    Sitanshu Panigrahi

  • Bank chain functionality in SAP

    Hi,
    If anyone has knowledge as to how to use bank chain functionality in SAP for vendor payment in SAP. Please let me know I will get in touch with more details for my query. This is required when we are making payments to a vendor and there are some intermediary banks involved between our bank and vendors bank. The tcode for setting up bank chain is FIBPU
    Regards,
    Vijay

    Hi,
    Mainly this bank chain is used for giving payments to foreign vendors. Normally house bank will finalise via which bank the payment should be made. But using this bank chain, you can specify this.
    Configuration:
    Create a scenario in IMG under bank chains.
    Here you can maintain your search criteria. If you select Gen.Search (General Search), you should use IMG activity Create General Bank Chain. After maintain this, you need to activate your chain in IMG Activity.
    Then in Easy Access, you can maintain Master data for Bank Chains under Bank accounting. Note, you can define upto 3 intermediary banks for a bank chain.
    Hope this will help you.
    Thanks,
    Krishna..

  • Bank chains

    Hi All,
    I have doubt about functionality of bank chains in sap.
    In the vendor master we will be maintain vendor bank accounts(created FI01) in payment transactions.
    To activate bank chains functionality we have activated scenario 0002.
    In T.code FIBPU we will be create bank chain to the bank details maintained in payment transactions in vendor master.
    In this case what will be the intermediary bank and ultimate bank.
    Regards,
    Durgasankar
    Edited by: Durgasankar.Innamuri on Oct 4, 2011 9:20 AM

    Hi
    friend,
    1. Sender bank will be company code bank example -
    JP Morgan Bank in FI12
    2. Receipt bank is vendor bank details - XK01
    3. Intermediary bank means -
    Third party bank -
    example XXXXXXBank
    Thanks
    Anil

  • Bank Chains determination

    Hi All
    We have a scenario where the client requires the bank determination should happen based on the bank chains.
    I know that the scenarios provided by SAP is driven by Sender Bank (Bank chain maintaied at our house bank level - FIBHU)  / Receiver Bank (Bank chain determined for each Vendor - FIBPU)
    Case:
    1) We have 2 vendors.  (A and B)
    2) Both are being paid by House bank "X".
    3) For 1st vendor A, Bank chain should get determined from the House Bank driven Bank chain (FIBHU)
    4) For 2nd vendor B, Bank chain should get determined from the Vendor oriented bank chain which has been maintained at FIBPU.
    Right now system is determining bank account details from the bank chains with either of one options. Either through House bank driven or through Vendor driven. but not both at a time.
    FYI, I tried using General Bank chain as well, but not working.
    Can this happen and possible. If Yes, please do reply where and what needs to be done.
    Answers are appreciated.
    Regards
    Natesh G

    Hi All
    We have a scenario where the client requires the bank determination should happen based on the bank chains.
    I know that the scenarios provided by SAP is driven by Sender Bank (Bank chain maintaied at our house bank level - FIBHU)  / Receiver Bank (Bank chain determined for each Vendor - FIBPU)
    Case:
    1) We have 2 vendors.  (A and B)
    2) Both are being paid by House bank "X".
    3) For 1st vendor A, Bank chain should get determined from the House Bank driven Bank chain (FIBHU)
    4) For 2nd vendor B, Bank chain should get determined from the Vendor oriented bank chain which has been maintained at FIBPU.
    Right now system is determining bank account details from the bank chains with either of one options. Either through House bank driven or through Vendor driven. but not both at a time.
    FYI, I tried using General Bank chain as well, but not working.
    Can this happen and possible. If Yes, please do reply where and what needs to be done.
    Answers are appreciated.
    Regards
    Natesh G

  • Problem related to bank chains?

    Hi,
    I want to know why do we require House Bank Bank chains and Bank to Bank transfer Bank Chains. Once we have configured them then how to use them as I have tried with Bank to bank tranfer but it is not showing the message for Bank Chains.
    Secondly, Bank Chains are only for the Bank to Bank transfers (Please write in detail)
    Thirdly, if we configure the bank Chains does the payment has to be go through the intermediary banks but do that require any mapping with the bank if yes then what and how,
    thanks in advance
    Regards
    Nitin

    Hi
    Mainly bank chaing used for ACH/Transfers only
    Activate bank chain  det 03 in bank chain config,
    Bank chain is mainly used for foreign payments through an intermiediary bank (i.e,3rd party bank)
    T code FIBB
    1. In bank chain --- give ntermediary bank details, say HSBC Bank (3rd party bank)
    2. In Assign -
    give sender/Receipitent bank details.
    1. XK01-Payment transation-give bank details (it is called Receipient bank)
    2. FI12---Create House bank---(it is called Sender bank)
    T code FIBPU
    1. give vendor details and execute
    Then now post FB60, F110
    Then check in SE11 - REGUH
    Then SE38-RFFOEDI1display
    Confi in FBZP
    1. payment methd in country- select Bank details check box,  Payment methd program RFFOEDI1
    2.Payment methd in comp code-- Select check boxes: Foreign business partner allowed, Foreign currency allowed, Customer/Vendor bank abroad allowed?
    once you run payment f110, Idocs you should notice segment E1IDBI@ which should contain correspondent bank details.
    Anil

  • Error message mes when trying to send PO via IDOCS to another system?

    Hi Abap expert,
    I am getting wired message what I ma trying to send PO via IDocs to other SAP system.
    I went to all partner , port configurations on WE20 and everything there seems to be fine but once I go to ME23N, then GO TO -> MESSAGES , than opens another windows when you key in MESSAGE CONTROL DATA that have been mantained
    in the outbound parameters in the PARTNER PROFILE configurations.Then I am getting the message :
    'No communication data has been defined for transmission medium 6'-----
    The LED on "PO:output screen' is YELLOW and never gets green.
    Can someone tell me how to overcome this and send my PO Idocs?Please some more details will be appreciate it!
    Thank you much eveyone!
    Boby

    Hi,
      Go and check it in NACE tcode, whether , Condition type, output types are maintained or not? if not maintained, Maintain it for 6 -PO for EDI.
    Hope this is the error you are getting.
    Thanks
    Manju

  • Mass update of Vendor Bank Chain assignment details

    Hi Experts,
    I have a requirement to mass update Vendor Bank Chain  assignment details. I tried to use LSMW recording method for transaction FIBPU but it does not seems to be working if we have more than 2 bank keys for a vendor.
    Can you please let me know the best way of handling this requirement.
    Thanks in advance
    Regards
    VJ

    Hi Jeff,
    I need to mass update the bank chain details for vendors. I am trying to use LSMW bath recording for
    FIBPU transaction, but the problem is when the vendor has multiple bank keys there is no option to select  for each Vendor and bank key combination to record the bank chain assignment details. Just Wondering to see if we have any alternative way to mass update Vendor Bank chain details.
    Steps to replicate the scenario
    Step1: Execute transaction :FIBPU, then enter Vendor number and press F8
    Step2: You will now see Vendor bank entries (LFBK table ), in this screen I don't have the option to select each vendor and bank key combination to loop in batch recording method when it has multiple entries.
    Let me know if you need any more information.
    Thanks
    Regards
    VJ

  • SAP intermediary bank (Bank Chain)

    Hi
    My company wants to send money to a foreign Vendor. The scenario is as follows
    Our House Bank : A   Intermediate Bank :B     Vendor's correspondent Bank: C
    question 1:  In vendor master data I have selected "wire transfer" as mode of payment.  What should be the bank details provided in vendor master data?.............Is it details of Bank B or C?
    I activated scenario 0003 in SPRO. Then in FIBPU  i am filled 1. Vendor number 2. House Bank details 3. payment currency
    4. payment method supplement :3 (Transfer funds) and the executed
    i am now in Bank chain assignment screen
    here we have recipient bank data and in selection we select the appropriate line and clicked on Bank chain assignment
    in new Bank chain assignment screen  we have the recipient Bank data  and sender Bank data.
    question 2    What should be the assignment on this screen?
    is it
    1.Bank B  type 2 ( intermediate bank)
    2. Bank C type 3 (recipient bank)
    or something else?
    Question 3. How to test the system?

    Hi Murugan,
    How do you solved this issue please? Any update on this subject?
    I've the same business requirement for my client.
    Thanks,
    Houda

  • Credit/Debit Memo Request with reference to Billing document via IDoc

    Hello Experts,
    It seems SAP doesn't support Credit/Debit Memo Request with reference to Billing document via IDoc. Via IDoc, we can create sales document only with reference to contract or quotation but not with reference to billing/invoice document.
    Wanted to check if anybody came across such requirement and what would be the best way to acheive (Other than custom program using BAPI).
    Additional Information: Its ECC 6.0 Environment with AFS 6.03
    Appreciate your help.
    Thanks,
    Shekhar.

    Please Help... it is Urgent...  Thank you

  • Use of bank chains with one-time vendors

    Hi, I want to use bank chains for one-time vendors; however, there are no fields available in which to enter the intermediary bank details when creating the invoice.
    Is it possible to use these two features together, and if so, how?
    Thanks for any advice you can give.

    Hi Ravinagh, many thanks for the information.
    I've tested your proposed solution but unfortunately can't get it to work.
    I've activated the delivered scenario 0003 (RECIPIENT BANK ORIENTED) & created a general bank chain as follows via transaction FIBB:
    In the Bank Chains screen, BankChn ID = 00001, No. = 1, Typ = 2, Corr. ctry, Corr.Bank key & Bank acct all completed with intermediary bank details.
    In the Assignment screen, Crcy = USD, Sender Ctry = GB, Sender Bank Key - 200000, Recipient Ctry = KY, Recipient Bank key = blank, PmntMthSu = blank, BankChn ID = 00001.
    I then created a OTV invoice with bank details of Bank Country = KY (& valid bank key & account).
    The payment program selects the invoice to be paid using currency USD, house bank which uses bank key 200000 and uses the bank details as entered in the OTV.  It pays the invoice but no mention is made in the log of intermediary banks, and when I check table REGUH there are no entries in the intermediary bank fields for the payment proposal.
    I'd be grateful for any further suggestions!

  • Bank chains /  Intermediary banks

    All,
    I have setup intermediary bank and tested to see if it's working.  I'm expecting see DME file generated for Intermediary bank and update the REGUH table when I do the payments.  But, neither of them seems to be working.  The DME is genereted for vendor's bank account. 
    Vendor master data setup
    Assigned vendor bank in vendor master data  and payment methos WTC and a house bank xxxx is linked
    Bank chain config (Img)
    Activated bank chain 2(Sender's bank) and did not create genral bank chain here.
    In FIBHS , I created bank chain for the house bank xxxx that we are using
    In FIBPU, I did the bank chians for my vendor.  I assigned the vendor to the bank chanin. 
    We are using ZFFOMTY program to print the medium. 
    It looks like the bank chian setu isn't wroking right.  Can someone explain if I'm missing something here.
    Please plesae help me here.
    Thanks,
    Sri

    1) Define scenario
    2) Activate Bank chain
    3) Define bank chain for house bank
    4) Assign bank chian to vendor / customer

Maybe you are looking for