Maintain company code wise Exchange rate in SAP

Dear SAP Experts,
Is there any additional configuration to maintain company code wise Exchange rates in SAP?
Awaiting for your valuable inputs......
Thanks
Madhusudhan.B

Hi,
Exchange rate table is not company code dependent. You can maintain, though, different exchange rate types.
Regards,
Eli

Similar Messages

  • F.01 Balance Sheet-Report to see in company code wise

    Hi Experts
    Goodevening
    We are recently upgraded to ECC.6 version of SAP.
    The issue is, when we use Tcode F.01 relating to Balance Sheet Report it is giving the result in Business Area Wise of all the assets and liabilities.
    Is there any possiblility to see the report in company code wise and not the business area wise. since the same asset is displayed in different business area wise.
    eg.,
    21100/1011004  Gross Block - Intangible assets  647,080.00
    21100/1011004 Gross Block - Intangible assets    22,048.00
    21100/1011004 Gross Block - Intangible assets  2,847,283.25
    21100/1011004 Gross Block - Intangible assets 92,040.00 21100/1011005 Gross Block - Plant And Machin75,258,226.67 21100/1011005 Gross Block - Plant And Machin   216,968.87     
              the problem is like above
    now we want to see the report in lumsum, without business area wise.
    pls suggest me how to get the report
    thanks in advance
    warm regards
    kishore

    Dear Kishore,
    While executing in F.01 give all parameters without Business Area and Execute
    Apart from that if you need to additional thing go through dynamic selection in F.01.
    Assign point.........thanks in Advance.
    Rgds
    Madhuri

  • Vendor list by company code wise with Acoount group..?

    Dear all
      Can anybody expalin me how to get a report on vendors list by company codes wise with account group...
    1.List of vendors company codes wise
    2.List of vendors company codes wise with account group wise.
    Thanks
    sap-mm

    1.List of vendors company codes wise
    SAP Easy accessSAP Menu-accounting-financial accounting-vendors-information system-reports for account payable accounting-master data-S_ALR_87012086-VENDOR LIST
    2.List of vendors company codes wise with account group wise
    MKVZ
    Regards,
    Indranil

  • GR Company code wise Number Range

    Dear All,
    I want to know is it possible to maintain material and accounting document different number range Company Code wise?
    If it is so, then explain.
    Suppose Company Code 1000 -
    No range 5000000000
    & Company Code 2000---- No range  6000000000
    Thanks \
    Akshay

    Hi,
    upto my knowledge number ranges are independent of company codes. even though if you have created new document types and assigned to transaction codes these tcodes will worl  independent of company code .   so its not possible to have material documents on company code wise (Material document number ranges will be on  client level)
    regards
    suleman

  • Default document type for F-28 per company code wise.

    Hi SAP Experts
    My client wants to default document types per company code wise for F-28.
    As per my knowledge in OBU1 is cross client and OBZO is accepting only customer invoice and credit memo but not customer payment.
    Please help with possible ideas to solve this issue, including any idea relates to substitution also. Your help is appreciated.
    Thanks in advance
    Prathima

    Hi Prathima,
    As mouri said it can be done only by Substitutions
    Since OBZO is only for enjoy transactions
    I have verified the notes aslo but there is no possibility for F-28 by company codes
    Better you can use
    Prerequisite
    SYST-TCODE = F-28
    Substitution
    use Exit
    Inside exit you need fetch the document type as per the companycode
    to achieve this you need define one ztable with company code and document type columns
    Thanks
    Vishnu

  • To view the company code wise cost and profit centers

    hi all,
    how to know the company code wise cost centers and profit centers? and what is the transactin codes for this?
    Regards,
    Soma

    Hi Soma,
    Could you try Table-->CSKS. I believe it will give you the complete list of Cost Centers and the default Profit Centers along with Company Code info.
    Regards
    Srinivas

  • Company code wise material with quantity table

    Hi
    I need Table for company code wise material with quantity to check 2009 stock which is issued.
    thanks
    Edited by: pandu123 on Aug 17, 2011 1:21 AM

    Hi,
    There is no table which shows  direct relation between company code and plant, you will have to arrive at the assignment of the plants to the company code.
    But you can either write a query/ report to show this relation and a report with this relation and quanity will have performance issues if you are checking for huge data.
    You can refer to the query and check the quantity in the standard reports.

  • Automatic update of exchange rate in SAP B1

    Dear All,
    How to do automatic update of exchange rate in SAP B1as per the market variation
    Regards,
    Kumararaja

    Hello,
    after you defined exchange rates in define foreign currency exchange rates, you could run exchange rate differences in the module financials and set execution date to be today.
    Regards,

  • Company Code wise message processing in Service Desk Solman 4.0

    Hi Guru's,
                     We are implementing Solution Manager 4.0 service desk with SP 15.We have got a scenario like our branches are in dubai , USA and Nepal. All these locations have multiple company codes. So our company requirement is to handle the message company code wise.
                                      For example if the message creator is from company code 1000 then the message should go to support team belonging to  same company code 1000. Is it possible to create a rule in PFAC with container company code to achievthis or is there any other method ? If creation of container is possible with company code how does the system get the company code details from Business Partner?
    Please give light into this issue.
    Best Regards,
    Sanju

    Mohammed,
    Could you please help me as to how did u go about it.
    I am having the same issue right now.
    Deepak

  • Difference between ob08 and oc41 Transaction code in Exchange rate

    Hi,
    Can any one help me out what is the difference between OB08 and Oc41 in transaction code in Exchange rates...
    Thanks in Advance
    Sivanand

    hi Siva,
    When foreign currencies are valuated, all the open items that were posted in a foreign currency are valuated. The valuation is based on the individual open items in a foreign currency, that is, each open item in a foreign currency is valuated individually.
    The exchange rate table is OB08
    AND
    OC41 is another transaction to the exchange rate table.
    When you try to change you cannt change the rates sometimes.... but u can see the rates displayed.......
    Regards
    Ranjit Kumar

  • Exchange Rates in SAP

    Hi,
    Please could someone let me know where I can find Exchange rates in SAP, I mean which table I could find them.
    Thanks
    Ram.

    (Transaction OB08 or S_BCE_68000174)
    Table is TCURR.
    Many FM use this table, eg CALCULATE_EXCHANGE_RATE.
    Regards.

  • Maintain company codes for MM

    The day we assign the plants to the company code, we have to do the settings i.e.,,
      in Maintain company codes for MM(T-code : OMSY).
    1.What's the siginificane(importance) of this?
    2.I have assigned the plants to the company code today,
       but forgot to do the settings on the same day i.e.,. maintain company codes for MM?
       Now what should i do?

    Hello Pavan,
    When you create a material master record, the control record must exist for the company code so without maintaining period in OMSY you will not be able to create the material master record.
    To Allow backposting or Disallow backposting you need to maintain indicators in this transaction.
    You can use, MMPV/MMPI if you missed out this setting.
    Hope this helps.
    Regards
    Arif Mansuri

  • Total records in IT0000 company code wise - SE16N

    Hello All,
    I need to check the total number of records in IT0000 for employees belonging to a particular company codes or personnel area. But there shouldn't be any duplicate entry for a personnel number in the total records.
    In SE16N I am able to get an entire list but not company code wise. Is there any way I can generate the  total no records in each infotype, on the basis of company code or personnel areas?
    Regards,
    Ally

    1 - If you have activated Complementary Measures, you should look at table PA0302 instead of table PA0000.
    2 - As mentioned by Pedro, se16n will not allow you to get what you require in a single step.  An Ad Hoc Query could probably allow you to create the report you want.
    3 - Should you be able to get lists of employee numbers "on the basis of company code or personnel areas" (possibly using se16n to look at table PA0001), then you could use those lists to explore the different infotypes (tables PA0000, PA0002, PA0006, etc...) using se16n, but unless you restrict the output to the records with End Date = 31.12.9999 , you will end up with many records for each employee.

  • GR Number range company code wise

    Hi,
    Can we do the enhancement/ user Exit / Badi for yearly GR Number range with repect to company code wise ?
    If yes then please provide the details how we can move further.
    Regards
    Rahul

    Hello,
    Company code specific number range for Material documents not possible because, The number assignment for material documents and physical inventory documents depends on the transaction/event type which is also allocated to each transaction in Inventory Management. The transaction/event types are divided into groups of number ranges. A number range interval has to be defined for each group.
    You cannot change the transaction/event types. However, you can change
    the number range intervals or you can allocate transaction/event types to
    new groups.
    Inshort, All company code will be using the same transaction event key so it will not be possible to have different number range for material docuement based on company code.
    Regards
    Mahesh Naik
    Edit by: Mahesh Naik 19.01.2011 2.08PM

  • Data will be load to data target  by company code wise .

    Hi,
    I have a requirement,"The data will be load to data target(Info Cube)by company code wise .
    so any one can provide me the ABAP code.
    Regards,
    Venkata Sharma.

    Hi Sharma,
    There is no problem you can do it in R/3 and also in Transfer rules.
    Hope this helps
    Assign points if useful
    Regards,
    venkat

Maybe you are looking for

  • How do I send a laptop in to HP for repairs?

    I have an HP Pavilion laptop with a cracked screen. This is the second time the screen has cracked. The first time we had an HP tech come to the house to repair it. He seemed somewhat inexperienced and nervous and had difficulty getting the display o

  • "Adobe Illustrator CC quit unexpectedly" After 17.1 Update (MAC Mavericks)

    This morning I used Illustrator just fine. This afternoon I updated to Illustrator CC 17.1 Ever since my Illustrator opens, displays the menus, and shows a window with new features for 17.1 - when I go to dismiss the menu illustrator crashes. Can't d

  • CURRENT TIME IN MILLISECONDS.

    Hi all, I need to get the current time in milliseconds. Is there any simple function for that. Please do help me. Thanking in advance... Regards, Aswathy.

  • Is it possible to avoid the or in this sql?

    Hi there, I have a subquery at work which is givng me some performance issues ... (I've changed the table and columns names). select h.name, h.age, h.sex, h.height, h.occupation   from human h where h.newest = 'Y'    and h.death_date is null    and (

  • Steps to create a query

    Hi ,               i need to bulid a query for tc : mb51 , tables mch1 and mska , query is to pull a field licha on to mb51 transaction.May i know the steps pls.. Thxs, vind.