Maintain data rate when transferring clips from XF 305 to FCP 7

Hello
I wonder if someone out there can help.
I have footage shot on a Canon XF305 - 1920x1080p, 50i, 50Mbps which I want to edit in Final Cut Pro 7.0.3.
I have installed the Canon XF plug-in and have used Log and Transfer to ingest one short clip as Apple Pro Res 4:2:2 HQ and one clip as Native.
However when I look at Properties of the transferred clips the Data Rate of Pro Res clip is 22Mbps, and of the native clip only 6 mbps. Is this significant or relevent? As the programme is for HD delivery I need to ensure I maintain the 50mbps data rate.
If it isn’t relevent is it better to ingest Native or Pro Res?
I’d be most grateful for enlightenment! :-)
Deborah
United Kingdom

Hi Deborah,
Don't get confused by Mb/sec (megabits) and MB/sec (megabytes) there are 8 bits in a byte, you can do the maths from there.
DM

Similar Messages

When transferring songs from iTunes to phone it was doing it ok then all of a sudden it started to say iTunes cannot pick up information from phone restore to factory settings I am afraid if I do this I will loose all phone numbers pictures and songs anyo

When transferring music from iTunes to iPhone after about 3 downloads a message come up saying iTunes cannot get information from phone and I should restore phone to factory settings I do not wont to do this because I am worried I will loose all phone contacts ,pictures,and songs anyone know how I can resolve this

Not a good idea to depend on an iPhone or any cell phone alone for such important data, which can be lost or stolen or damaged beyond repair.
Contacts are designed to be synced with a supported address book app on your computer and/or there are a number of free email accounts that support syncing contacts and other data over the air such as with an Apple iCloud account, Gmail, Yahoo, and Hotmail.
Photos/videos in the iPhone's Camera Roll can and should be imported by your computer as with any other digital camera.
In addition, contacts and photos/videos in the iPhone's Camera Roll are included with the iPhone's backup.

Sound Buzz when transferring file from Trash to desktop

I get the occasional Sound Buzz when transferring file from Trash to desktop
Its a Short "grounding" buzz similar to slowly plugging an electric guitar when the amp is on, but its loud !
I am just using the internal sound,

Brett - thanks for that input, but as stated in my original post this happens whether I do the copy within Finder, or from inside Bridge.
Your note did inspire me to try one thing though: I UN-checked my Bridge preference to export caches to folders when possible, then I went to the folder I was trying to move (on the NAS) and did Tools > Cache > Purge Cache. I found that if the folder contained only files and no other folders, then I could move the folder to my desktop. However, if the folder in question had nested folders, then I still run into the same conflict.
Question: since this conflict does not happen when moving a folder from one computer to another computer (but only from the NAS to a computer), I'm not sure how your logic holds when you say "Bridge is trying to cache the files you are moving and creates a ".BridgeCacheT" file before the remote version is copied"
To answer your other question, we use AFP or at least is says "afp://server.local" when we connect. My apologies for not being an expert on this. The icon of the NAS on the desktop looks like the icons for the other computers.
Thanks, I'm still trying to solve this. It's really become a major problem for us as we now have to drag files individually (rather than by folder) when we want to do something with them. -- Jim

Only some photos fill the screen on ipad when transfering them from my iphone 5

Only some photos fill the screen on ipad 2 when transfering them from my iphone 5 can any body help please

Sorry let me rephrase I transferred some photos from my iphone 5 to my ipad 2 , but when viewing photos on the ipad only some of them fill the screen why?? Is there an easy fix for this or is just one of those things that I will never get to the bottom of , can any body help

When transferring photos from android to pc I get error code: c0000002. It keeps looping. Help.

When transferring photos from android phone to pc I get error code: c0000002. I am stuck in a loop. Please help.

thank you for answering. the problem is at least currently resolved.
On Tue, Sep 2, 2014 at 2:16 AM, Silkrooster <[email protected]>

HT4527 When transferring iTunes from old computer to new computer, even though all of songs were copied over, not all of them went to iTunes, some appear to be stored elsewhere. How can I find these songs, and how do I transfer them to iTunes?

When transferring iTunes from old computer to new computer, all my songs were copied over, but not all of them were stored in iTunes. It appears they are on the computer somewhere, but not on iTunes. Where are these other songs likely to be, and how can I get them onto iTunes? Because of this problem, Apple will not allow me to update my iPhone.

You may/must have had music files stored outside of your iTunes library.
I'd recommend going to the Finder and then via the search box look for files with mp3 aif m4a aac etc. depending on the music format your digital music had. With the list of files shown you should be able to learn which files were stored outside of your music > itunes folder
Chances are they could be burried somewhere under your documents, downloads, desktop, ... we all have different storage and organization habits.
Then when you find the missing files, on the new computer you can do add to library and go to the folder on the other computer where the missing files are - if your systems are networked - or sneak them over using a USB thumb drive or portable hard drive if you have lots of files, or if you like to have an extra backup of that music, copy to optical disc.

Date issue while transfering pics from macbook to external drive

Hello
I am transferring pictures from my Macbook to an external hard drive and my issue is that the date of the picture (date of creation/modified) is being replaced by the date of the transfer… So let say that all my 2013 pictures have now the date of today – 19th June 2014. I tried to drag the pics as well as to export them but I am getting the same issue. I am doing transfers regularly and it is the first time I encounter this issue. Funnily enough it works when I drag one picture at a time but not for more than 3 pictures – very weird. Your help will be very appreciated !

There are two kinds of metadata involved when you consider jpeg or other image file.
One is the file data. This is what the Finder shows. This tells you nothing about the contents of the file, just the File itself.
The problem with File metadata is that it can easily change as the file is moved from place to place or exported, e-mailed, uploaded etc.
Photographs have also got both Exif and IPTC metadata. The date and time that your camera snapped the Photograph is recorded in the Exif metadata. Regardless if what the file date says, this is the actual time recorded by the camera.
Photo applications like iPhoto, Aperture, Lightroom, Picasa, Photoshop etc get their date and time from the Exif metadata.
When you export from iPhoto to the Finder new file is created containing your Photo (and its Exif). The File date is - quite accurately - reported as the date of Export.
However, the Photo Date doesn't change.
The problem is that the Finder doesn't work with Exif.
So, your photo has the correct date, and so does the file, but they are different things. To sort on the Photo date you'll need to use a photo app.

Transferring clips from avid to fcp via firewire

a bit off the wall question ... but is it possible to transfer clips from my avid media composer adrenaline (pc) to my fcp via firewire using the capture tool. the clips are dvcpro hd on the avid. it is easy to output the clips or sequences to tape (panasonic aj-hd1200 or 1400) via firewire so my plan is to "simply" substitute fcp for a deck and capture the clips free running into fcp. theoretically it seems to me that it should work. i set the device to non-controllable and capture settings to dvcpro hd 720p 60 to match the output from the avid. one problem is that when i connect the firewire cable from the pc to the mac, on the pc new hardware found message pops up and i have no way of telling windows what the device is. anyway have any experience or any ideas. thanks.

I doubt very much that your plan will work.
Why not just set up file sharing on the PC and pull the files onto the Mac using Finder?
That way you will retain the embedded data in the files.
Then you will probably need the QuickTime codecs from Avid too. (I don't have a link, maybe someone else will post it)
All in all, it might be better just to recapture directly into FCP from the original tapes.

Quality issue when moving clips from events to project

When I drags clips or parts of clips from events to my project, the quality drops significantly (blocking).
Original clip (H264 encoded SD video) is fine, when imported into imovie it is still fine when skimmed/viewed in the event but as soon as draged into the project, the quality is bad (when skimmed/viewed in the project) and blocking occurs, especially in dark parts of the video. Of course this bad quality remains on the exported video :-(((
Any idea where this might come from and how to overcome it ?
Thx for your support

Apologies for bumping this again, but I'm getting the same issue and I'm wondering if it's the original HD files that are incompatible in imovie. It's odd that only a few of us are reporting it.
I'm capturing HD video in mov format (motion jpeg) from a panasonic FZ5 still camera. The footage has been imported via iphoto. It's 30fps - not the native uk frame rate - but I can't change this on the camara. When I edit in imovie, I get the same massive drop in quality as soon as I move an event to the timeline. Blocking especially on blocks of colour. This happens on playback from the timeline within imovie and on export. I've tried creating a project in both pal format and ntsc in case the frame rate is the issue. No joy. In Final cut the problem seems not to exist, but I'd prefer to manage these very simple home movies in imovie.
I'm now wondering whether to switch to a different still camera like the newer panasonics or sony hx5 as these capture in avchd (presumably 25/50 fps if sold in uk) and might get over the problem. any thoughts?

Proper Data type for transferring XML from ABAP to XI

Dear Colleagues,
I have a question on how to wrap XML data, that itself contains an encoding
declaration, so that it will be properly transferred to XI.
XML Generation: "always use X"
I have searched a lot on SDN and other resources but could not find
information, describing how a web service should wrap unicode-data when
making it available to XI. The XML processing group emphasizes that all generation of XML should be done using X-bases (HEX) datatypes in ABAP and preferably using UTF-8 as ancoding. This by itself is not a problem.
But transferring UTF-8-XML - through which interface?
When a webservice provides an XML Stream and wants to transfer it to XI then there is a bit of a paradox situation, because it has to choose between using an X-based or Character-based type for its interface
-> as Binary data?
- when using X-based data types in the interface, I have control of the character encoding, but I expect that the XML-information will probably be wrapped in base64 encoding and then the XI will receive a base64 encoded
XML-block instead of "plain" XML.
I did not find any reference information on how the soap interface of XI and the WAS behave when transferring X-based data, however.
-> as Character data?
- on the other hand when using Character-based data types (e.g. String), I have no control of the codepage being used. I have then only the choice to generate the default encoding of the application server. Maybe this encoding
will be transformed later to a different encoding, but usually during this process the header, which declares the encoding in use will not be adapted as well.
So if I have a unicode machine, it will generate UTF-16 - based XML. I have no other choice, if I use a character-based type for output. And this will also be stated in the header of the XML stream. If the XML stream
leaves the system it will probably be transformed to UTF-8, but the XML-header will still state the content to be UTF-16, because the header will probably not be auto-converted together while adapting the Character
encoding.
Because of these issues I am quite insecure, on how to generate and wrap UTF-8 - based XML, so that I can properly hand it over to XI, ensuring that
it stays UTF-8 and that XI can really unwrap it automatically.
Does anyone have a tip in which type to wrap XML-based data on the ABAP stack so it will be usable in XI?
Thank you very much for your attention and time.
Yours
Christian Steinert

Something like this should work (with a little tweek I imagine)
This would be in the 'Command on Target':
OdiFtpGet "-HOST=<%=odiRef.getInfo("SRC_DSERV_NAME")%>" "-USER= '<%=odiRef.getInfo("SRC_USER_NAME")%>'" "-PASSWORD= <%=odiRef.getInfo("SRC_PASS")%>" "-REMOTE_DIR=<%=odiRef.getInfo("SRC_SCHEMA")%>" "-REMOTE_FILE=<%=odiRef.getTable("L", "COLL_NAME", "W")%>" "-PASSIVE_MODE=YES"
Set the Technology of the 'Command on Source' as File, and the technology of the 'Command on Target' as ODI Tools
Edited by: Bos on Jun 30, 2011 11:53 AM

How to tell the date of a source clip (from events) in a project

I am making a very long and complex project.
I am using events from IHD and EHD.
The project has tons of clips from tons of different events spanning over 10 years.
I want to add some still pics. I want the still pics to be inserted around the same time the video was taken (i.e. my pics are sorted by date and my video clips in events are also sorted by date).
Question is:
Is there a way to see the date of the clip being used in the Project???
(The events list the clip dates, but I have so many clips in the project, that I couldn't possibly find them all using the events view).
So, I want to be able to say, this 10second portioned clip in this project was taken on April 5, 2005 for example.
Can I do this some how??
Thanks.

Thanks.
Darn it.... I didn't realize this.
I put together a 20min project so far... it is composed of many many few second clips from probably over 100 different events spanning over 10 years.... now i want to add the still pics to it..... so I guess it is a little to late for this solution ;(. I probably should have added the stills during the time I added the video clips (since it would be hard to go back to see what events the videos clips in the project came from).
I like to put all the video clips in first and then add the still pics. Then add music last.
But your tip is good to know and thanks so much again!

Finder Error -36 When Transferring MP3s from One External HD to Another

I am trying to transfer MP3 files from a Lacie external HD to a Western Digital external HD. Initially some files transferred without any problem but then I started to get this error message: The Finder can’t complete the operation because some data in "name of file" can’t be read or written. (Error code -36). I know the files are not corrupt because they all work fine. If I transfer them one by one they transfer but I cannot transfer more than one file at a time without this error occurring. Both drives are formatted as Mac OS Journaled. Is there any way to transfer these files without getting this error? Is there any other software out there than can successfully do this instead of Finder?
Thanks!

How can you tell if the files are actually corrupt? They open (and play), and I've transferred them from a previous external hard drive to the one that they are currently on a few years ago without any problem. The size of the file that is getting hung up is only 8.6 MB, nothing substantial. I'm D/Ling SuperDuper! now, I hope that helps.

Parameter Error when Transferring Files from ipod to laptop

Hi,
I have posted this topic previously but didnt respond fast enough and I think the system locked it down as I had too long of a delay.
I have recently set up iTunes on a laptop and want to start using this as my default iTunes for syncing etc. Unfortunately I no longer have access to the desktop that housed my original iTunes so I have followed the instructions to use my ipod as an external disc and transfer the files this way.
These are the instructions I have followed http://lifehacker.com/105256/how-to-copy-songs-from-your-ipod-to-your-pc
There are two issues I see. (1) the ipod control folder is allowing me to see what is housed in the folder but it is slightly greyed out compared to the other folders in the same location.
(2) when I try and copy the music folder to my desktop etc I get a parameter error.
So for example the error I have when transferring to my desktop I get
"Cannot copy OUTO (the file): The parameter is incorrect.
Hopefully someone has seen this before.
thx

No idea on your specific question but if it is of any help here are some articles and links about moving files from the ipod to the computer...
Copying from iPod to Computer threads...
http://discussions.apple.com/thread.jspa?threadID=1300144
http://discussions.apple.com/thread.jspa?messageID=797432&#797432
http://discussions.apple.com/thread.jspa?threadID=809624&tstart=0
Also these somewhat dated but still useful internet articles...
http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/
http://www.engadget.com/2004/11/02/how-to-get-music-off-your-ipod/
http://playlistmag.com/help/2005/01/2waystreet/
Good luck!
Patrick

Imovie 11: When moving clips from event to project, the top of the video clip is cut off.

I'm working with a new project. When I add clips from an event to the project window, the top of the video clip is cut off. Quite a bit of it is cut off. It happens on every clip. The aspect ratio is correct and I've set the video to fit in frame. How can I fix this? I would really appreciate any help.

You may have stabilization turned on in the project. On one of the clips, click on the small gear icon at the start of the clip and select Clip Adjustments. In the Inspector that opens, uncheck the box "Smooth Clip Motion" against Stabilization. If this fixes it for you, do the same for the other clips.
Also, it's a good idea to turn off certain preferences in iMovie>Preferences (an iMovie menu item). In the Browser tab uncheck the boxes for both "Automatically stabilize clips that have been analyzed" and "Apply rolling shutter correction for clips that have been analyzed". See this picture:
The stabilization process causes a zoomed in effect on the video, as it has to "average" the pixels in order to smooth any shaky motion. You therefore lose a certain amount of the picture, depending on the extent of stabilization applied. Here's what iMovie Help states (in part) about this process:
"iMovie stabilizes video by analyzing the camera motion in the video and then moving the picture the opposite way to steady it onscreen. In this process, iMovie zooms in on the picture slightly. The amount of unstable motion in the clip determines how much zooming is necessary.
Zooming in crops out some of the picture, but you can fine-tune the level of stabilization to strike the right balance between keeping the video steady and retaining as much of the picture as possible."
John

Transfering clips from one 'project library' project to another

When I copy and paste clips from one 'project library' project to another 'project library' project it somehow brings along all the deleted material that was taken out of the finished product. Can't even figure out how this is happening... I'm trying to make different versions of a music video with most of the same clips and transitions. (imovie '09)

Thank you soooooo much! I don't know if this is possible, but I wanted to add beat markers to the music first before I added the clips from the other project. When I duplicate the project,it also brought along the music. I know you have to add beat markers to the music before you add clips. So is there anyway to lay the music down first then add the duplicated project (minus it's original music).
THANKS for your time!

Maintain data rate when transferring clips from XF 305 to FCP 7

Similar Messages

Maybe you are looking for