Maintain diffrent prices for same material

How to maintain different prices for same material (assume that the price of the the material is varying frequently that to with high margin)
But my req is need to maintain N  values for same material .Is it possible??
For ex,
3 Jul Purchasing 20 Pc with 20 INR
5 Jul Purchasing 10 Pc with 10 InR
7 jul Purchasing 20 pc with 2 Inr .... like that price is changing freq. But i dont want to use MAP .Whatever price i purchased will be used for cost calculation.Any suggestion??
Message was edited by:
        velmurugan s

Hi,
If your Purchase price changes frequently and you want your MAP or STD price to match the purchase price then you will have to write a simple ABAP that will read the last price paid for each item and automatically post an MR21 to change the MAP or STD price to that price.
I have seen this used in other implementations and it is the only real way to get the MAP or STD price to relate to the last price paid.
I would question why you need to do this  though as the two "prices" are designed to be different and there is no accounting reason why they should always be hkept in line.
Steve B

Similar Messages

  • How do we maintain diff price for same material diff customer

    Hi Experts,
    Wish you all a very happy new year 2010.
    Here is the question which I have for you..very elementary.
    I need to maintain different price for different customer for same material in the same sales area, for the same plant
    Can anyone let me know how to do it !!
    There are more than 10k customers for whom different price needs to be maintained.
    P.S: I tried to search in the forum a lot about this, but was not able to find one correct answer.
    Thanks and Regards
    Rohit Dujari

    Hello,
    You can take help of ABAPer to create a batch input session or you may use LSMW .  You can split these 10000 customers into some practicle numbers (group) depending on your policy.
    You may also explore rules for creating condition records which frankly i am not awareyou get a select rule tab on bottom side of screen when you go to  vk11/vk12
    Regards
    Vivek

  • 2 Prices for same material

    Dear All
    Is it possible to maintain 2 prices for same material.this is the requirement from our client  the base price some times has 2 values based on the price on which the product is purchased from supplier.
    Can we maintain the credit limit at ship to party level.
    Regards
    Mohammed
    Edited by: Raeesuddin Mohammed on Jan 20, 2011 8:21 PM

    Yes.
    -If you are talking about Purchase price, you maintain 2 diffrent info records in ME11 for each vendor.
    - If you are talking about selling price you maintain 2 pricing records in VK11.

  • How to Maintain two different prices for same material in different qty?

    Dear all,
    How to maintain two different prices for same material in different batch quantities in purchase order(ie.,info record)?
    (Vendor is supplying quantities in 2 different batches & also in different prices)
    Expecting valuable reply.
    Jeyakanthan

    In a PO you can create 2 items, and each item can be maintained with a different price in the conditions.
    In info record it is not possible to have different prices for the same period, except for scales.
    so if you have a price of e.g. 2 USD for 1000 kg and 1,90 USD for 2000 kg then you can maintain this in scales, but you still have to have 2 items in the PO so that each one can individually find its price.
    Alternative you can create contracts (as well with more than one item) to reflect the different prices and batches.

  • How to arrive same day two difference prices for same material/customer

    how to arrive same day two difference prices for same material/customer.pls give the solution
    thanks in advance
    Aravinthan.K

    Hi
    This is possible through some careful customization
    In your condition table you need to bring the field PRICE LIST
    That is customer/ Material/ Price list
    That is customer  ABCD / Material X / Price list 01---Price is Rs 10
    That is customer  ABCD / Material X / Price list 02---Price is Rs 20
    The condition records to be maintained like this
    So same material and same customer with price list 01 price is Rs 10 and with  price list 02 price is Rs 20
    Now in sales order you will find  price list field in item details SALES B tab
    Through incompletion log you can make this field as an mandatory field
    Now in sales order same material and same customer according to the price lists different price is picked
    In img-sd-basic functions-Maintain Price-Relevant Master Data Fields--here you can define different price lists
    Regards
    Raja

  • Separate Moving Average prices for Same Material

    HI All,
    My client wants to maintain moving average price separately by shipment wise. In this scenario same material for same plant might have different moving average prices for each shipment. Is it possible with standard SAP system or how is it map in to System?
    Thank you & Best Regards
    Sameera

    Duplicate thread already same question raised refer below link,
    [Re: Separate Moving Average prices for Same Material]

  • How to maintain different prices for same item in different organizations

    hi all,
    We have noticed that the list price of an item at Item Validation Org level is getting defaulted when creating requisitions. We want to maintain different prices for the item for different organizations, so that the prices will be properly defaulted to requsitions depending on supplier and receiving org.
    We found one way of doing this. Using contract purchase agreement and Advanced Pricing price lists. Can anyone please let us know if there is any other way of achieving this??
    Also, I have a question regarding Advanced pricing Price Lists. I performed following steps.
    1.Set the QP: Licensed for Product profile to Purchasing
    2.Create and approve a contract purchase agreement in Oracle Purchasing
    3.Define Price Lists and Price List Lines (optional)
    4.Define sourcing rules and ASLs to automatically default source information onto requisition lines. Associate Contract to ASL.
    5. This will enable Oracle Advanced Pricing integration in the following Oracle Purchasing functionality:
    Requisition pricing
    Purchase order pricing
    But when I create requisitions, the price from price list is not getting defaulted automatically. In requisitions form, if I go to source tab and select source as a Contract Purchase Agreement, then the price from price lists is getting defaulted. Is there any way where the source for the requisition can be automatically defaulted to Contract and the price can be picked from price lists??

    Can oyu not make it an organization level item and specify the proce there instead of keeping it a master level item?
    Regards,
    Utsav.

  • How to make Different Price for same product in one Sale Order

    How can i customizing my system?
    I need to sale for different price same product A in one sale order. And price condition type cant be manually. i can separate them by position. for ex. in first position: product A is one price and in 2nd product A with discount. i tried to do it by changing a price group for 2nd position to determinate a discount condition but it generates invoice split.
    Someone have any suggestions?

    Hi
    you can have it automatically determined after some custo and using userexit_pricing_prepare_tkomp in MV45AFZZ and RV60AFZZ.
    The idea is to use ítem category field (PSTYV) as a part of pricing data to determine different prices for same material by changing manually ítem category when creating a sales order
    - you'll need to create a new ítem category copied from the one you´re using and do all assignments
    - add field PSTYV, if not there, to pricing field catalog. This thread has an example on how to and coding required for userexits
    http://scn.sap.com/thread/1693234
    - Adjust your pricing sequence as per new table
    - Maintain specific prices in new table for materials with this new ítem category
    Finally, when creating a sales order change, when required, default ítem category by new one to get specific price for material.
    Regards,
    JM

  • Error msg: ZFI999:Maintain price for the material 254600254 in plant 1000

    Hi gurus
    18.02.2009 i created one STO PO. but material price in the accounting view the price was "Zero" in plant 1000. In plant 2000 the price has already maintained.
    But today i updated the material price like Rs 200/- through MR21 for plant 1000.
    After that while i transport the material through MB1B (351 mvt type) plant 1000 to 2000, i got the following error msg.
    "ZFI999:Maintain price for the material 254600254 in plant 1000".
    Regards
    Amsi

    Hi Amsi
    the message no is not standard i think there has been a new message created. please check with your ABAPer about the message.
    just want some clarification. you are doing STO from plant 1000 to 2000. the price should be picked for that material maintained in plant 2000.
    in case of queries please revert back
    Adwait Bachuwar

  • Two Purchase Info Records for Same Material & Plant Combination

    Hi,
    2 Purchase Info Records are there for Same Material & Plant for 2 Different Vendors & Net Price is maintained in both Info Records
    1. Material M1 - Plant 1000 - Vendor A - Net Price Rs.4
    2. Material M1 - Plant 2000 - Vendor B - Net Price Rs.3
    Vendor A is Regular Vendor
    (Tick as Regular Vendor is his Purchase Info Record)
    It is observed that Rs.3 is picked up for Costing Purposes
    Requirement is that - Net Price within Pur. Info Record of Regular Vendor i.e Rs. 4 must be picked up always for Costing Puposes.
    Is this possible???
    What Logic system uses while picking up the Price in case where there are 2 Pur. Info Records for same Material & Plant???
    Thanks & Regards...
    Ameya...

    Hi,
    1. Material M1 - Plant 1000 - Vendor A - Net Price Rs.4
    (Validity - 28.04.2008 To 31.12.2008)
    2. Material M1 - Plant 1000 - Vendor B - Net Price Rs.3
    (Validity - 01.01.08 To 31.12.2008)
    Thanks & Regards...
    Ameya...

  • How to maintain different price for different grades

    Dear sd experts
    plz let me know one thing.. i have one material but we have divided 4 grades like AA,BB,CC,DD
    now here material is same sales org , distribution channel is also same
    so i want to maintain different price for all like 500,400,300,200
    so is it possible in OMWC T.code
    i know variant configuration is helpful but that concept is different  ,, i have checked this link http://scn.sap.com/message/14124162#14124162
    but this is differnt
    so plz experts any comment on this ... thanks a lot

    Hi Venu,
    while creating the material you can enter the valuation type as below
    and in the Material master  under accounting view 1, click on the organizationa level where youc an see your valuation type C1
    In the same way you can maintain the prce for C2 and click on the organizational level under the Accounting 1 view
    for the same material and same plant with different valuation types you can see different price
    hope you find thd difference in price between two valuation types
    revert if you need more details.
    regards,
    santosh

  • Two prices for one material in sales order according condition type

    Hi,
    I configure the condition type according to following condition record:
    Plant/ Sales Organization/ Distribution channel/ Material / Customer
    (because system should calculate two prices for one material in two plants)
    In the sales order screen, when user firstly select material , quantity, plant ,  system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing procedure and to have a price for material, user should update the price in the price condition in sales order.
    It is so difficult for user to update one by one, because there are several sales orders which need to update.
    Is it any way to solve this problem?
    Thanks,

    > In the sales order screen, when user firstly select material , quantity, plant ,  system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing
    Hi,
    Why to let the user press Enter button before entering plant value Obviously, system will give error, because it doesnt get all the required value based on which you have maintained condition records.
    Ask the user to enter all the value at item level otherwise you will have go for the option that you are doing currently.
    It is said prevention is better than cure
    Hope you get some inputs
    regards,
    Sagar

  • Cost Estimation Through Two PIR valid for same material

    Hello Everyone
    I am trying to costing strategy with PIR (Purchase Info Record). Just to check whether its working right or not i have only choosen sub strategy 'Effective Price from Quotation'. My problem is we have got more than one PIR for the same material from different vendors (both have valid dates). My first question is how system will calculate if both PIRs for same material is valid with different prices.
    My expectation was that system should pick up the price from PIR which has regular vendor flag ticked in PIR master record but this is not the case. System is picking up the price from the other PIR although i don't know the logic. I am observing system is picking the lower price (as i tested two materials) in both cases. Can anybody guide me how can i make sure that system picks up the price from PIR which has regular ticked or can anybody suggest something elsethat which is right sub strategy to use for PIR?
    Thanks in advence

    Hi Young Sun
    The link really helped me a lot to understand the process how system is picking up price. We don't use source list and quota requirement. I have noticed that system will not consider regualr flag tick in PIR for costing unless you you configure at backend in
    Material Logistics->Purchasing->Source Determination->Define Regular Vendor
    Once i have activated that tick system is working fine and picking up the price from regular vendor flag. If regular vendor is not ticked system will go vendor with lower price.
    @Imdad: Thanks for your kind help as well and input.
    Many thanks again.
    Regards

  • Unit Conversion issue for same material with Diff KPI

    Hi,
    i have a report with multiple key figures which form a structure.
    Unit conversion for this report and all the key figures are defined at report level.
    Below are the settings in place
    Source currency:    Data record from target
    Target Currency:    From variable ( Input variable in BeX report)
    Conversion  factor: Dyanamic Determination of conversion factor
                                   Using Reference Infobject if available otherwise use T006
                                   Reference Infobject: 0Material
    Issue: For 1 Key figure conversion to TO is happening, however for other Key figure conversion is not happening for the same material.
    Note: Conversion to TO is defined in BEX settings for Info object 0material and stored in DSO UOM0MATE.
    Why for same material some key figures convert to target unit correctly and not the others?
    See the attached screenshot. Sales Quantity is convertin to "TO" while Volume third party shows figue in"ERR" for same material.
    Thanks
    Nayab

    Hi,
    Following reasons cause to your issue,
    1. Unit Conversion is not maintained for that particular material  in source system Material itself, so that  conversion data data may not updated in DSO (UOM0MATE).
    2. For particular transnational data record key figure value don't have any base unit or units measures, that case also  you may get that error.
    Request check the transnational data in your InfoProvider and 0Material Master data and DSO data (UOM0MATE) . Correct the data based on that.
    Check the Master data test in RSRV for 0Material, if any SID generations was missed or not.
    I hope this can be help to find the cause of error , based on that you can resolve problem.
    Thanks & Regards,
    Leela Krishna.

  • Error :Maintain pricing conditions for the material for the excise invoice

    Hi
    i have maintained excise data for material, after that i have created scheduled agreement with lp and with 0 value private and dummy tax code  and delivery schedule is released. Now when i do the goods receipt i am getting error " Maintain pricing conditions for the material for the excise invoice date
    Message no. 8I629" can some body can help me.
    with regards
    Narendra kumar

    Hi,
    goto tcode fv11 u have to maintained the condition.
    first enter the condition type like jmop -
    then enter, next screen u have the select the below comination.
    select the plant/vendor/material base u have to maintain the conditions.
    Thank's
    MVS

Maybe you are looking for