Maintain IBAN in Version 4.5B
Hi all,
can we maintain IBAN number of house bank in sap version 4.5B ?
i dont see the IBAN field in Tcode FI12.
could you share how to maintain IBAN in Version 4.5B
Thanks,
Shwetha
Hi Shwetta,
I think that IBAN is only available from v 4.6 - I used it in 4.6C
Regards,
Tony
Similar Messages
-
Diff: Version on workflow builder and Maintain Active Plan version on SWU3
Group,
Can any one help me to understand the Version on workflow builder and Maintain Active Plan version on SWU3
Thanks in advance !
Richard ADear Richard Antony,
The Versioning in the Workflow is very important its some what simmilar to the version on any SAP Objets like Tables, Program etc.
Here Suppose any change comes in working workflow, then in stead of directly change them you can create a version of them and them modify it. So that you can reverst back to that version if required.
Like wise there is lots of importance of versioning Workflow.
The Active Plan version is also important to establish at SWU3. As all the Workflow is using Organization management which is very depended on the Active Plan version. so based on which Plan version you want to use you can Provide in SWU3 to tell Workflow system to use this.
Hope this will give you a clear picture.
Regards,
Chandrashekhar. -
Mass Maintainance of Planning Version "000"
Folks,
Is there any standard functionality available in SCM 5.0 for mass Maintainance of Planning version "000" to material-locations combinations ? These Material-location combinations are created directly in SCM and are not CIFed from ECC.
Thanks in Advance !!
Regards
Pawan.Hi Nitin,
Planning-Version-Dependent Location Product Data Plng Version--- appears as a selection criteria but not as an attribute to be maintained. Below is my exact requirements.
Lets say i have manually created products A, B, C...upto Z at location 123 directly in APO.
Now i want to assign these product-locations combinations to 000 Planning version.
In MASSD T-CODE i am not able to location Planning version as an attribute to be maintained ( i.e at bottom most of the screen).
I hope you got my requirements and the problem i am facing.
regards
Pawan. -
Maintaining a costing version in a costing variant
Hi,
I am creating a costing variant for standard mat. estimation. I have to maintain a costing version.
I don't know how to set all the parameters in costing version in OKYD. Will I have to set variant for transfer price, exchange rate and quantity structure?
Why do all these parameters show under and not beside the name of the element in the Assignment Tab of costing variant.
Best wishes,
karolHi karol
For standard costing purpose - costing version 01 is defualt version offered by SAP.
With costing version u can create different / various cost estimates created for SFG or FG material
You need to enter version 01 in customizing control paramters for costing variant - viz, in valuation variant, costing type etc
The need to create diff costing versions depend on the requirements.
Ex. Exchange rate is determined thru valuation variant, If you wish to have diff exchange rate for costing - u can enter diff rate and define it in diff costing version
So, when u do costing for a material with two version u will have diff costs
Version 1 - say 100 USD
Version 2 - Say 120 USD with diff exchange rate defined
Again in most of the implementations we dont come across using diff versions. These are considered only when base version costing is stabilized and controls are put in place for entire product cost cycle
System offers quite a lot of options, but everything cannot be chosen at a time to evaluate. My suggestion would be stabilize with the base and then look for these options.
Hope the above clarifies - Pls assign points as a way to say thanks -
Install and maintain two lattest versions of oracle discover ,owb , htmldb
To install and maintain two lattest versions of oracle discover ,owb and htmldb in one server , what are requirements. what steps to follow to install and maintain. My Current setup is
Oracle Discoverer Suite 10g (9.0.4.0.1) ,
HTML_DB Release 2.0
OWB 10.1.0.4
I want to install and run anather versions of all in same server? how ?i have just thought that i have to install in separate oracle home in separate directory. my server o/s is unix. i want more info on it.
-
Maintain Fiancial Statement Version with alternative account
Hello,
We have a global chart of account, for a certain company code, each of
the accounts from the global chart of account has its own alternative
account from an alternative Chart of Account.
We have defined the Financial Statement under the principal Chart of
Account but have assigned the alternative accounts.
When we execute the S_ALR_87012284 transaction to display the
balance sheet, we are not able to see the node text of our Financial
Statement structure.
What is the procedure to correctly display Balance Sheet Structure,
maintaining the nodes and node text?
Thank you
DanielHi,
When you execute the T.code S_ALR_87012284,select special evaluations tab,select alternative account number check box:
Pls go thru below:
Issue Alternative Account Number
If this parameter is set, the G/L account number is replaced by the alternative account number (from the company code-specific G/L account master record).
Requirements
These account numbers are only substituted if country charts of accounts are maintained in the global data of the company codes selected, and these charts of accounts differ from those belonging to the company code. The alternative account numbers in the G/L account master records must be contained in the respective country chart of accounts. The alternative account number is only shown on the financial statement if you have explicitly assigned it to the appropriate items of the financial statement version. You must therefore maintain your financial statement version so as to contain the alternative accounts.
Thanks
Aravind -
How to maintain Message Class Version?
Dear friends,
Pls do let me know how to maintain the version of a message class and how to revert back the changes made to a message class.
Regards,
Alok.Hello Alok,
1. Message class does not any version concept.
2. Its always online and latest.!
As per my understanding, SYstem is not maintaining the version of the message class becuase, you can edit one or any messages from the message class.
All messages are stored in table T100, and this table is also not activated for "Log
data changes".
Regards,
Vasanth -
SOP Confituration- Maintain Copy Profiles version A00 not maintained
Hi Gurus
While configuring Maintain copy profiels (SOP) and trying to input A00 in Target Version field in develpment server
Iam finding following error
"Entry A00 does not exist in P44V (check entry"
"Input values must be defined in Table P44V. The value or values ' A00 '
are not specified in this table."
Iam not fining any img path or TC path to configure this A00
Your earlier response is highly appreciated
thanks
K.PrabakaranHi Prapakaran
A00 is active version
what we need to do is create inactive version say 001 or 010 anything and forcast sales plan or production plan
creat sales plan in MC87 and then goto MC88 make this inactive plan to active plan which system automatically takes to A00
hope this will solve your problem
Thanks
Bala -
Hello Friends - I need to update IBAN for the New Bank set up I am doing in FI12. Pls let me know if it should be maintained in FI12 and transported to PRD or directly to be maintained in FIBAN in PRD.
(2) We need to update IBAN for large numbers of Vendors in Master data. Previously, It was not maintained. Pls let me know how it should be maintained in one go.
Pls share the Best practices for the above.
ThanksHi Godavari,
1) You can do by SM30 -> V_TIBAN.
1895527 - House bank details with IBAN are not transported through FI12
2) Check below note for a large number of vendor update.
503396 - IBAN mass generation
Regards -
Anyone maintain multiple LV versions of VI's with SCC?
Hi Folks,
This has to be one of the largest things I struggle with on a daily basis, that makes me wanting to move away from NI. I have now-legacy hardware that I must continue to support, but it was dropped from 8.6 and higher. So I'm running 8.5.1 and 2009. I prefer to keep abreast with the latest LabVIEW version, but NI is NOT making this an easy thing to do.
I have slowly established a good sized code re-use 'library', and am working to integrate MS VSS into the mix.
How have you handled legacy hardware, multiple versions, and source code control? Do you establish different versions (LV I mean) of the same file within the repository? Or does this simply confuse the mix?
Again this is a *constant* battle. If I devel a project in 2009, make the mistake of a mass compile, everything is broken for my older projects and it takes 1/2day to sort out dependancies.
<grumble>
Jamie
v2009 devel. w/RT8bitbanger wrote:
I did indeed read some of the articles here in NI Zone in regards to SCC, and was given the impression that VSS was an acceptable solution.
It is compatible as far as NI is concerned. However, I, as well as many others, have found that VSS is a piece of junk. I've used it and think that SVN is superior in more ways than I have fingers and toes. Nobody is telling you not to use VSS - I am just offering my opinion, which is based on experience.
In regards to running the virtual machine, I have heard that suggestion from an NI Engineer, and honestly, think it's complete hogwash that I should have to run VMware or the likes for the *development* environment. I'm sorry, but I just don't accept that as a 'solution'.
Thanks for the reply, and sorry for the rant, but I'm really getting sick of dealing with this BS that does nothing but get in the way of development time.
Well, again, nobody is telling you that you HAVE to use a virtual machine. I'm pointing out that as an ultimate solution. I don't think it's strictly necessary to go that far, but it's pretty much guaranteed to keep things separate. I think you can get by with a robust source code control system, as they are designed to handle this kind of situation.
But that's just my opinion, whether you consider it BS or not. -
in the face of the 'issues' I've seen in the faq's, I was hoping there's a way to maintain my present version of Firefox while, at the same time, browsing with the beta 4 version. I believe it would be a good thing in the face of the fact my comp is a bit on the 'older' side.
I always run the a portable version out of a folder at first.For a few weeks anyway.Then if it runs OK I install as my main browser.It always gives me a chance to sort out which add ons work and which don't.Until I get all the add ons I want working right I keep using out of a folder.
I just put a short cut on the desk top. -
International version to be maintained for vendor
HI All,
We have a requirement in which we have to maintain the international version of the vendor that can be done using MK02. But we have to create a program which will do the mass upload. We were not able to call BDC as the screen involved an ALV. Any pointers(BAPI or FM) on this will be of great help.
Thanks
SameeraHi
Its seems you want delivery from SD side
Please check following link
[http://www.sapfans.com/forums/viewtopic.php?t=287345&highlight=vendor+return]
[http://help.sap.com/bp_mediav1600/Media_US/HTML/Scenarios/V3I_MED_Scen_EN_US.htm]
Regards
Kailas Ugale
Edited by: kailasugale on Sep 28, 2011 10:35 AM -
Maintaining version in PO when price is change
Hi,
We have one requirement , when we create PO in some cases the PO need to be amend in such cases , if user is chaging the PO price , can we set some version to indicate as amended PO.
regards,
zafarDear,
version management
Version Management
Spro>MM>purchasing>versionmanagement>sepup version management for purchasing documents-->activate for your doc category, and also maintain reason for version management .
Regards,
Gopala.S -
How to maintain SWC versions ? to pick the latest one ?
Hi all
How to maintain different SWC versions? How to pick the latest component
version?
Name spaces will not be having any versions ?
can any on explain on this pl
regards
RakeshRakesh,
while creating SWCV you can enter ther version of the SWCV which you are creating.
Namespace will be under particular SWCV . So no version of name space
regards
Sreeram.G.Reddy -
Maintaining a custom compiled version of glibc in multiple machines
Hi,
I am trying to maintain a custom version of glibc due to the minimum kernel version bump. I have seen the sticky topic in the forum about Updating packages compiled via ABS.
The steps which seem clear to me -
run
abs core/glibc
Copy
/var/abs/core/glibc
to another path and do a couple of changes to PKGBUILD
run from the custom path
makepkg -s
So, creating a custom repo and using that as the top most repo and reinstalling glibc is the way to go when multiple machines are involved ?
When the package is built copy it to another path and run
repo-add
Put the custom repo at the top repo in
/etc/pacman.conf
refresh pacman
pacman -Sy
reinstall glibc using
pacman -S glibc
Is this the way to go ?
cheers !
Last edited by kmganesh (2011-02-16 06:52:01)kmganesh wrote:So, creating a custom repo and using that as the top most repo and reinstalling glibc is the way to go when multiple machines are involved ?
I would just, after running the abs command and copying the glibc PKGBUILD into a folder in your home directory, run
makepkg -s
in the folder with the PKGBUILD to generate the package and then copy the package onto a USB key to distribute to other machines.
Installing with
pacman -U /path/to/package
Unless you have many machines that you want to install the package on, it is much simpler than creating a repo.
Last edited by andrewthomas (2011-02-15 02:40:52)
Maybe you are looking for
-
My Creative Zen Xtra no longer recognised by desktop
I'd plugged in the USB cable to my Zen Xtra before plugging it into the PC. I heard a crackling noise after which the PC would not recognised the Zen. Got a message about unknown USB device. Plugged a thumbdri've in after that, and got the same messa
-
After updating to ios 7, I am now asked to enter my password continuously when accessing my emails on outlook web access. Before I just had to log in and I was able to reply, save emails, etc without re entering my password. How do I fix this?
-
Canon EOS 5D Mark III Using a 70-300mm Lens without a flash?
I just recently purchased a Canon EOS 5D Mark III and would like to know what you would recommend as a good setting to take photos of someone bowling at a center with the camera using a Canon 70-300mm Lens without a flash? Thanks in advance!
-
I am using imovie HD6 and when I import simple pictures into imovie, they appear fine when they are loading but then they turn all white. Why is this?
-
How do I turn off the sign in to Apple request when I'm accessing my music on my Iphone 5C?
Does anyone know how to disable the Apple ID sign in request when accessing the music files on the Iphone 5C? It is extremely annoying as I rarely access ITunes store on my phone.