Maintain Multiple Sale Unit of Measure
Dear all,
How can we maintain multiple sale unit of measure for a particular material in single sales area. Meaning different sales orders can have different unit of measure for the same material in the same sales area.
Regards and Thanks,
Check (MM02) Material Master - Additional Data button in menu bar - Unit of Measurement Tab
OR
Scenario: - BP buys ItemA in Kg and sells in Gr. (Refer SAP Note 883504 - Different UoM for the same Item)
1. Define ItemA with kg as the unit of measure in the Purchasing Data tab - and Gr as the sales unit of measure in Sales Data tab. Enter items per purchase unit as 1000 and the items per sales unit as 1.
2. Generate an AP invoice with a quantity of 1, the items per purchase unit is 1000 so 1000 items enter the stock.
3. Generate an AR invoice with a quantity of 1, the items per purchase unit is 1 so the stock of the item is reduced by a quantity of 1 gram.
There is no way to indicate that the stock has been reduced by 1000kg which is equal to 1 gram.
Workaround:
1. Duplicate ItemA as Purchase Item (UoM=Kg) and Sales Item (UoM=Gr) - This means that you will have 2 items, ItemA1 and ItemA2
OR
2. Generate ItemA (both Sales and Purchase Item) by configuring UoM and Price according to the smallest UoM and perform every transaction by keeping this UoM
NB: Do not forget to define UoM in Administration - System Initialization - General Settings - Display tab - Default Weight Unit
Also check following links for understanding:
Price by multiple unit of measure
Re: Multiple UOM's
Thanks & Regards
JP
Similar Messages
-
Adjusting the behavior of sales unit of measure on sales order
Hello Everyone,
I have a question regarding adjusting the behavior of sales unit of measure (UOM) on sales order (SO).
We maintain 3 UOM on material master u2013 A, B, C; where A is base UOM and C is sales UOM.
If we change the material on existing sales order in VA02, system also always changes the UOM on SO to C as well because C is sales UOM on material master. Sometimes SO quantities are in A or B UOM and we do not want system to change them to C when material is updated.
We know it is a standard SAP behavior and the question is if it can be adjusted somehow (in configuration or some other way), so system is not changing the UOM on existing SO to sales UOM when material is updated.
PS if we leave sales unit of measure field in material master blank, when material on SO is changed system is still changing the UOM, now to the base UOM A
Thank you!
AlexANSWER: According to SAP there is no way to change the behavior without taking the risk of breaking a lot of stuff.
-
Sub:Stock report with sales unit of measurement - reg.,
Hi guru's
we have a requirement to have the stock report with sales unit of measure instead of base unit of measure can anybody guide me how to do this.
thanks in advance
tulja singh.From std. , I think your requirement can not satisfied.
Make customized report.
Take the help of ABAPER. -
Hi,
as far as I can tell, Netpoint synchs not the Sales Unit of Measure (oitm.SalUnitMsr) but the quantity Per Packaging Unit (oitm.SalPackUn) when you do an Item sync, this figure then appears as the item's "# Per Package" in Netpoint.
Is this correct?
If so, is there any way to force Netpoint to sync the Sales Unit of Measure (I can do my own method via synch plugin but it would be nice if there was some way without that)
Thanks!Hi Corbin,
I figured as much.
What I am doing instead is running an SP on my SAP Server by way of a sync plugin that updates a table on the Netpoint server, and then looking up the UOM for the Partno when the PartDetails.aspx page is loaded.
Roundabout, but works.
Still it would definently be nice to be able to choose from a dropdown in the next version, which field from SAP you wanted to map to any field in Netpoint - that way it would be very flexible. -
Hello Gurus,
How can I set multiple sales unit for a material ? such as box/package sales unit . so when I create a sales order, I can choose any one sales unit
Many thanks,
FrankHi
You can create them in the Material Master Record of that material by clicking on the ADDITIONAL DATA tab on the extreme left of the application tool bar.
Thanks,
Ravi -
Sale unit of measure is not copied into Delivery from MF60 staging
Hello all,
we are using MF60 for EWM staging. Component has base unit of measure as M2. For production purposes, issue unit of measure was set to KG.
I managed to get KG in MF60 during staging, but Outbound delivery created contains however unit M2. This is unit of issue from sales org1 tab. I changed this to KG, but still M2 is coming.
Please let me know if you know what is the problem.
Thanks in advnace!
Regards, Andrey.Hi Andrew,
I think this issue is nothing to do with EWM. You can check with your SD consultant why sales UoM not getting copied into delivery. May be because of some delivery type or delivery item type settings.
I had same issue for over delivery tolerance, which I raised with SAP and they advised to use the customized BAdi to get it done.
Thanks,
sandip -
Proposal.:.Multiple Purchase Unit of Measure and pricing
The objective of this message is to start a discussion around procurement unit of measure and pricing.
Currently, some of our clients are facing the following limitation:
- They stock an item in a specific unit of measure (let say metre)
- They buy in a different unit of measure (let say unit).
In this scenario, we have a conversion factor of 6 for example so when we order 1 unit, the system will stock 6 metres.
The issue is that the pricing in SAP Business One for procurement is expressed in stocking unit of measure. It means that we do not have any possibility to enter the price by unit. For example, if in my purchase price list I enter $10 for one unit, on the purchase order, SAP will calculate if I buy 1 unit: $10 x 6 = $60. This is obviously wrong.
The second issue is that I can buy the same product from 3 suppliers but in 3 different UoM (one supplier will sell it in unit, another one in metre and another one in pack of 10). The system can not accomodate this business scenario.
Regards,
Vincentquite late, but I faced the same issue with a window-maker company. They buy alumium bars (different lenghts) and keep them and worked them in meters.
What we do was use the Production module, and define a new BoM item (bar_meter), so when they buy 1 bar (6.4 meters) and they want to use it, they create a production order to create 6.4 new bar_meters. Then they used as many meters as needed to make the window.
Regards,
Leo -
Hi
Plz tell me is it possible to have multiple sales UOM?Dear Rahul,
In Material Master (MM01/ MM02),
You can maintain multiple Sales unit.
T. Code: MM01/ MM02
Select Views from the list.
Key-in Organizational Data.
Now, here, at top-left you will notice a Tab: Additional Data. Click.
Next screen, go to Sub-Tab: Unit of Measurement.
Here you can maintain Alternate sales unit with a conversion, based upon Base UoM.
Best Regards,
Amit -
How can i change unit of measurement in sales order on header
Dear all,
I have material master with base unit of measurement " Ea ".
I have to take unit Pc in sales order.
how can i change unit on header in sales order.
i changed unit on line item in sales order by setting in sales unit field in material master.Hi,
You can very well do it, please do the following steps,
Go to material master and select the Sales Org.1 and 2, here maintain the sales unit PC and
it will ask you for the conversion, so maintain your conversion for PC to EA. Then maintain
the Division, delivery plant, material pricing group and account assignment group(if not maintained) and save it
Now create the sales order for that resp. material, you will find that system will pick up
the sales unit which is maintained in the material master's sales orgnization tab.
For this you need not to change at the header level of sales order
Please check and revert.
Thanks,
Hrishi -
Multiple Unit of Measure (No Fix Conversion Formula)
Dear All,
Cilnet has given me requirement to book the sales document for the particualr product in unit of mesure 'Nos/PC', and the stock is maintained in Base Unit of Measure 'Qtl' (100 Kg = 1 Qtl). Price is also applicable or calculated on the basis of QTL but there is no fix conversion formula of 1 PC = How Many QTL.
Please guide me on this point.
Regards
RahulHi,
I was facing the same Problem ,well for this you need to define a character and associate the same to a Class .
And Finally need to assign Combination of these to material in material master classification view.
Define Charter :
http://wiki.sdn.sap.com/wiki/display/PLM/Howtocreateacharacteristic
Assign the Char to Class :
Tcode : CL02
Under Char Tab Give the Charcter Name and Place "S" in Org. Area.
Thanks.
Edited by: C.Ankit on Mar 7, 2012 8:18 AM
Edited by: C.Ankit on Mar 7, 2012 8:18 AM -
Base Unit of Measure to Sales Unit Conversion
Hi,
Currently we are selling material in MT and all other transactions in MM and Production are in MT only.
Now client wants material to be sold in Meters, also in some cases the same material will be sold in MT also.
(As per my knowledge generally if the conversion is one to one i.e. base unit of measure is pieces and Sales unit of measure will be boxes and
1 box = 10 pieces can be maintained in material master.)
Here for conversion between Metric tonne to Meters there is formula involved so how and where this conversion needs to maintained in system.
How to map this type of scenario.
What all activities needs to be done from SD side and which other modules need to be involved this process.
Note: SAP is installed for more than 3 years now.
Hope i clear enough.
Regards,Hi following is the formula.
OD = Outer diameter, thickness, length, Number of tubes are maintained in sales order charateristics during sales order creation.
OD
Thickness
Weight in Kgs / M
length of tube
Nos of tubes
Total length in Mtrs
Rate / MT
Rate / Mtr
A
X = (A-B)*B*0.02456
'L
N
T= L xN/1000
R
M=R/1000*X
Regards, -
Multiple Units of Measurements for a single item
Hi all,
How do I maintain multiple units of measurements for a single Item/ I have a scenario where purchase orders are being made for sand in Metric Tons, Tons, Kgs and Cubit Feets. Each measurement is being used at each construction site of the company but the item is single sand. One more problem is here with the material reconciliation of stock since it is maintained in different units of measurement and conversion from unit to other is problematic.
Thanks
YSvee ReddyHi YSvee Reddy ,
Julie is correct in saying that this feature will be available in version 8.8, currently in Ramp-up.
Please see the [8.8 landing page |https://websmp203.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705857&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&]for a link to the 'What's new' document.
You can contact your LPE to discuss participation in Ramp-up.
All the best,
Kerstin -
Load multiple Units of Measures using RMDATIND in LSMW
Hi All,
I have created a conversion for materials using LSMW. I have used the standard direct input
program RMDATIND.
Requirements have changed considerably over a period of time and now the new one is that I need to
load multiple alternate units of measure for each material.
The issue when using RMDATIND is that the structure BMMH6 for alternate units can hold only 1
record at a time and my one single legacy source record has the information for two alternate units of
measure.
The LSMW that I created cannot handle this right now as it can load only one Unit of Measure as
BMMH6 can hold only one record.
Is this a limitation or is there a workaround/solution for this issue of mine in LSMW while using <br />
RMDATIND.
I will greatly appreciate any useful inputs in this regard.
Thanks,
Vamseefor this use LSMW BAPI method
Business Object BUS1001006 Standard material
Method SAVEDATA Create and change ma
Message Type MATMAS_BAPI Create and change ma
Basic Type MATMAS_BAPI02 Create and Change Ma
in this method you habe below strctures...
E1BP_MARM Units of Measure
E1BP_MARMX Checkbox Structure for BAPI_MARM -
Hi Forum,
Can anybody tell me the table - field for sales Unit of measure for Material.hi,
check this,
VBRP-VRKME.
Regards,
Arpit -
Error in units of measurement conversion "BOM"
hello gurus gudmorning everybody
i have problem in project regarding the units of measurement conversion BOM
this is the scenario: 1000 ft2( BASE UNIT MEASUREMENT) = 1ea ( SALES UNIT) ( 2bed room flat) it is a higher level item
sub items are in EA base unit measurement ex: like one sofa one air conditioner etc instead of taking sale unit measurement of higher level item , its taking base unit mesurement of higher level item , .i.e instead of taking 1EA 2bhk = 1AC, 1 SOFA, but is calculating 1000ft2( 2bhk) = 1000ac, 1000sofa , plz help out to rectify the conversion
thank you in advance
venkatDear Venkat,
Try with this
Please maintain the alternative unit of measure in sub itemes master data at Additional tab like this
in AC master data 1EA = 1AC and 1AC = 1EA 2BHK
in Sofa master data 1EA = 1 Sofa and 1Sofa = 1EA 2BHK
Now you try
I hope this will help you,
Regards,
Murali.
Maybe you are looking for
-
How do I update the browser on the MacBookPro? I would like to get newer version of Safari; however, if that is not possible, is there a version of anything that I can get for MAC OS 10.5.8?
-
Multiple workflows publishing at once SOAP error
Hello, we are running SharePoint 2013 August 2014 CU with SQL Server 2012 and Windows Server 2012. We are having an issue where when users simultaneously publish a workflow, one of them will receive a SOAP error saying that the temporary file could n
-
LION screen sharing and remote log in issues
Hi, In Snow Leopard I could access my iMac screen from my macbook and have the iMac restart and allow me to log in and continue to use the iMac. In Lion I cannot access the log in screen remotely after a restart. I need to go to the iMac and actually
-
Integration of Oracle BI Publisher with OBIEE 11G
Hi, all. I want to know How to Integration of Oracle BI Publisher with OBIEE 11G? Because I can't create data set using Oracle BI Analysis now, and the analyses and dashboards in BIEE presentation catalog is unvisible. Why? Thank you.
-
PreparedStatement - Any Good If I Close?
The benefit of using PreparedStament and Bind Variable is it's performance if used multiple times. As it doesn't go through the compilation/parsing, the plan is already there as well as the structure is available. Now if I close the statement, does t