Maintain number range interval for master data upload for existing employee

Hi  Experts,
1)I have the scenario to upload additional data for existing employees in PA. Employees are already existed in SAP HR , But additional Infotypes are required to maintain for those emploees
2) I have the senario where i have to upload master data for new employees.
Pls give the detailed description of how to maintain number range interval i.e. External or Internal for upload in both the above scenario. Do we have to maintain number range manually in master data record & then upload it Through BDC or LSMW?
<< Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
Edited by: Rob Burbank on Jan 12, 2011 3:49 PM

>
s c patil wrote:
> 2) For new employees i have to maintain desired ( my or client?) number range in SAP system as External number range & then default that number range in NUMKAR & then maintain those number range in master data record & then get the data template filled by client & then upload the data & after that create new number range which is next to existing External number range as an  Internal number range. & then default that Internal number range.
>
> Pls reply ASAP
Yes Mr. Patil...
For existing employees
you need to execute HIRING ACTION Through BDC with External number range. While recording you have to use atleast three infotype i.e. IT0000,IT0001,IT0002. In addition you can upload other infotype through PA30.
For new employees
While configuration you can create another number range as internal  for new hiring. and use NUMKR feature as well.
Here I don't understand that why r u looking for upload process for new hiring, if it is not mass hiring. It should be day to day activities which would be done by user through PA40.
Best Regards,
Anand Singh

Similar Messages

  • Maintain number range interval 01 for posting change notices

    Hi,
    I am doing transfer posting using movement type 321 (quality to unrestricted) for one material.While posting i am getting error"Maintain number range interval 01 for posting change notices" Message no. L0015
    WM is active for this material and doing this movement for one plant which is newly created in system.Wil you please advice for which document type i had to maintain number range.Please inform SPRO path / Transaction to be used to make required changes.
    Thanks & Regards
    Atharva

    Maintain number range for posting change in tcode  OMLW

  • Re : Maintain number range interval "" for quants

    Hi
        While doing the transfer order i am getting the following error.
    " Maintain number range interval "" for quants "
    How to solve this.
    Thanks
    Anto

    dear sir
    go to Tcode : OMLW click for quants tab, give your warehouse number and maintain the number ranges, for your warehouse.
    Regards
    jrp

  • Re : Maintain number range interval "1" for quants

    Hi
           While creating transfer order the following error is coming.
    " Maintain number range interval "1" for quants "
    How to solve this.
    Thanks
    Mani

    Dear,
    Enter t-code OMLW.
    Click on tab of For Quant.
    Then maintain number range.
    Regards,
    Mahesh Wagh

  • Maintain number range interval "01" for inventory documents

    hi,
    when i am creating a physical inventory creating document t.code LI01 i got this eror:
    Maintain number range interval "01" for inventory documents.where i have to maintain please reply me.
    naveen

    hi,
    spro->log.execution>warehouse mgmt->activities->physical inventory---->maintain number ranges.
    Regards,
    velu

  • Maintain number range interval "" for inventory document --help!

    Dear all,
       I running the FM - L_INV_DOC_CREATE for creating the physical inventory doc for WM ( warehose management ) level. But i get this error -> Maintain number range interval "" for inventory document. If i try to create it using the t-code  LI01N,everything goes smoothly. Anybody haf any idea how to solve this? thank you.

    1.Did u go into Number ranges for WM?
    Yes
    2.Did u click on assignment & number ranges not on Number range intervals
    Yes
    3.Di du cahnge it to 02 for all?.
    Yes on first warehouse 111 all changed to 02 and on warehouse G02 just on TR and TO changed to 02
    4.Did u select NR intervals? and give the number range?
    Yes
    5.Did u transport the intervals?
    No, as I am working on DEV practice client. Dont need to transport.
    6.Did assign the number rabges to ur Warehouse?
    I assigned No. 2 to warehouse, not number range, can u ellaborate more on number range assignment.
    I created migo for same material with different storage location and material and accounting documents are created. Even the number ranges are working on another warehouse created by colleague, but its not working on my warehouse and as mentioned earlier this is Dev practice client. No need to transport.

  • Function module Vs BDC for master data upload

    Hi ,
    Please advice we should use the following function modules for master data upload or we should go for BDC.
    MP_RFC_SINGLE_CREATE
    MP_RFC_INACT_CHANGE
    MPLAN_CREATE
    MPLAN_CHANGE
    MPLAN_SET_DELETION_INDICATOR
    ASSET_MASTERRECORD_MAINTENANCE
    MPLAN_ITEM_CREATE
    MPLAN_ITEM_CHANGE
    GL_ACCT_MASTER_SAVE
    GL_ACCT_MASTER_SAVE
    GL_ACCT_MASTER_SAVE
    Actually, we have already used these function modules in our upload program, but we are not sure if these function modules will create any data inconsistency.
    Please let me know, if we should continue using the FMs, or there is any risk using the FMs and we should replace them by BDC.
    Thanks in advance.

    HI Vikram,
    Better to serch for the BAPI for uploading the master data.Becuase we have problems with BDC and FM's.
    If you use FM's it does n't contain all the fields which you want.IF you go for BDC this is not maintainable for future releaseas.IF you upgrade then screen may change.
    IF don' have any BAPI then better go for BDC.
    Thanks

  • LSMW used only for master data upload?

    Hi
    Can you please let me know if LSMW is used only for master data upload or we can also use it for transaction data ?

    Hi Christino.
    I have come across a standard SDN thread which deals with the uploading master data, refer it:
    [SDN Reference for uploading master data using LSMW|how can we upload master data by using LSMW;
    [SDN reference for which uploading is preferred (Master data or Transaction data)|Which one is better for uploading data LSMW or ECATT ?;
    Good Luck & Regards.
    HARSH

  • Xls. sheet for Master data upload

    Hi Can any body suggest me or send me the sample, how to maintain xls. sheet Template of  particular fields for Infotypes 0,1,2,7,8 etc for the purpose of data upload.
    <removed by Moderator>
    thanks
    S Mishra

    Hi Mishra,
    You can look into the Standard Business Blueprint Templates - Data Transfer Tool of SAP....and get an idea...
    Check this Note 1060029 - SAP Best Practices for HCM US - Variants, Misc, LSMW ...
    You will find files for infotypes and you can set up your templates based on these....
    Other way is to
    Go to SE11 >> Enter the Infotype Number PNNNN (with NNNN being the Infotype)...
    It presents you with the structure.......Copy that structure and you can create your excel sheet with that template....
    Good Luck !!!!
    Kumarpal Jain.

  • .CSV file for Master data upload in GRC PC

    Hi all,
    We want to upload some Master Data for GRC Process Controls 3.0. Since we do not have access to MDUG tool yet, and we have a demo planned soon, we decided to go with the approach of uploading some data using the program GRPCB_UPLOAD.
    So I uploaded a .csv file with the following structure and was able to create master data. But, the object name was not updated.
    Structure
    Object Type     
    Object ID     
    Infotype     
    Sub-type     
    Start     
    End     
    Object abbreviation     
    Object Name     
    Language
    In addition, for some objects, we'd like to update the other attributes with data too.
    Would anyone have the .csv format for such a detailed upload for Process / Sub process / Control?
    Regards,
    Preksha

    Hi all,
    First of all, thanks in advance, but I´ve  tried to upload a template similar to Preksha´s template but when I uploaded it through GRPCB_UPLOAD program it doesn´t work properly, because when I execute the background process, I´ll check its status and then it is cancelled .
    In addition, I follow the recomendations from the pdf called "Process Control Upload Master Data v1" released by RIG in June 2008, but in contrast I can´t upload the structure correctly.
    Do you have any idea? Or could you give me an idea which explains how to create a correct template? Do you have any clue of what I would have done wrong?
    Thanks a lot.
    Regards.

  • Master Data Upload for Enhancement in Attribute

    Hello Friends, Please help me with this,
    I have enhanced Vendor Master Attribute to add the fields know as Mobile accounts. <b>ZMBACCT Char 10</b> now this is also<b> mapped</b> to <b>ECC field KONZS</b> in 0VENDOR_ATTR. Transformations are correct.
    when I load the data for the vendor master attribute via DTP all fields show data in "maintain master data" but only this new field does not show any data . Even though the Data is there in PSA for this field KONZS. I also activated the master data and ran attribute change run. But still no data for field ZMBACCT. All I want is that data should go in for this field and table /BI0/PVENDOR get updated with data
    for this field.
    Please help with this urgently
    Thanks
    Soniya kapoor

    Hello Soniya
    Data is available in PSA it measn problem is in your transformation......following possibilities u can check...
    1. Check in start routine if you have taken any condition which is eliminating the records of new firlds
    2. Check the field level transformation of ZMBACCT and KONZS...check if it specified correctly...
    3. Go to monitor and debug the load...you will find where is the problem...this is the best way to check any load ....
    Thanks
    Tripple k

  • Steps for Master data upload from ECC6.0 to BI7.0

    Hi experts,
    I need to load material master and customer master data from ECC6.0 to BI7.0 and i could not see the steps to do so in sdn.
    Can anyone please give me the steps from the beging till end usign Business content 0material_attr/text/Hier .
    I Will assign deserving points to all the answers.
    Thanks in advance.

    Hi,
    Steps:
    1. Go to  RSA5 in  ECC6 to Install Business Content D.S.
    2.If you want do any change then Go to RSA6 in ECC6
    3. Replicate DS in BW .
    4. Create Transformation (to connect DS to MD).
    5 Create Info package ( to load from S/S to PSA ).
    6. Create DTP ( to load from PSA to MD Objects ).
    Please let me know if i am missing any steps.
    Ali.

  • Subject: Number Range interval deleted automatically

    Hi
    At the time of Accounting Document Posting system is giving error message for maintaining number ranges interval for the corresponding Number Ranges (For example: 50, 51, 49, 19) for the fiscal year 2010. But Number range interval has already been maintained in the Tcode FBN1 for the fiscal year 2010.
    After maintaining Number range interval again for the corresponding number range in Tcode FBN1, when we are trying to post accounting document system is again giving one error message that document number (5000000000) is already been used. When we are looking into Tcode FBN1 the current number status is 0.
    So to resolve this problem  we have to provide the Number range status into FBN1 manually (suppose if 10 doc are already existing in the system for number range 50 then we have enter the number range 5000000010 manually in FBN1).
    After Number range status setting in FBN1 System is allowing to post the Accounting Document.
    Along with this one more issue is appearing related to MM posting period. 
    The current posting period in the system is 08/2010 and the initial period in the system is 08/2007. System is automatically going back to the initial posting period 08/2007. After opening the Posting Period with Tcode MMPV we can post the document only.
    Both Issues are appearing repeatedly.
    Plese help
    Thanks..
    BRSR

    Dear If you have already maintained number range for particular period then again for same period and series system should not allow to maintain but as you said above it is allowed so i feel it was not done correctly first time and the given series number could have already been used so when changed the current number in status it's working fine.
    For  MM posting period issue please check transactions MMRV,OMSY,OMWD with your MM consultant
    Cheers
    KK
    Edited by: kiran kumar on Oct 19, 2010 8:32 PM

  • Can any one tell me what is the master data upload sequence in sap pm...? i am new to sap pm module..

    Hi experts,
    Please help me to get the sequence for master data upload in sap pm ......

    Probably yet another Blog/Document for someone to create..
    Here's my offerings:
    Finance data: chart of accounts, g/l accounts cost centres, profit centres, activity types, etc
    Configuration data
    Classes/characteristics
    Inspection characteristics
    Master Warranties/Permits/Partners/Documents
    HR masters
    Work centres
    Materials
    Functional locations
    Equipment (serial numbers)
    Measurement points/documents
    BOMs
    Task Lists
    Maintenance items/plans
    Maintenance plan schedule
    Historical orders (if required)
    Historical notifications (if required)
    Historical Measurement documents (if required)
    PeteA

  • Error in billing number range interval.

    Hi,
    I created a new billing type. I assigned the number range properly. But at the time of billing document generation, system is throwing a message "For object RV_BELEG , number range interval  doesnot exist". I have checked in 'SNRO' against the object type 'RV_BELEG' , the number range interval that I have assigned for the new billing type is existing there. Still the error is coming.
    Please suggest what needs to be done.
    Thanks & regards,
    Rupam.
    Edited by: RUPAM KR SEN on Mar 21, 2011 10:46 AM
    Edited by: RUPAM KR SEN on Mar 21, 2011 10:47 AM

    Hi Samit,
    Thanks a lot for your suggetion. There is an user exit but with different program name in our system. Due that user exit the  customizing done by me was not working properly. The exit has been deactivated and now it's working fine.
    Thanks & regards,
    Rupam.
    Edited by: RUPAM KR SEN on Mar 21, 2011 1:56 PM

Maybe you are looking for

  • Path problem

    sir, i install jdk1.2 at d:\ drive sir how can i set path for this problem is: when i run javac it give an error as "illegal operation" then when i click on java run time icom present in the start-program menu it gives the same error message

  • How to write 'into' a PDF-document ?

    hi there, i have a new small project to do with the following problem: i get a file (text-file) with invoices from an external system. I want to 'overlay' this file with a form, which is a PDF-document. the question is: is it possible to write 'into

  • How can I handle no data with popup and email??

    Hello Experts, Can I do the following in VC 7.0? If the user searches for data and the data doesnt exist, then I want to create a popup asking if the user wants to create the data? If they say Yes, then I want to send the data they fill in to an emai

  • Java manually installaiton is required in the case of  r12 cloning on the new server.

    Hi experts,  i have need some suggestion. i have required to clone my production database to a fully new test server. for this i know i have  required  to prepare the new test server for ebs r12. for exp install rpm package, setup the kernel paramete

  • Mulitple iphoto library folders

    hi all, please help. i am trying to put all my photos into 1 iphoto folder. the problem im having is that i have about 3 at the moment ( 1 main HD,1 ext HD.1 old laptop) they are all on my main HD now , but i cant tell where they are from looking at