Maintain number range object

Hello Friends,
When I am doing a Goods Receipt, system is giving the message " Maintain number range object for object J_1IRG23A1, year 2008, excise group 50". What to do for this. Please tell me.
Regards,
nr

Hai
Thank you very much, it is working , I have saved GR, but now when I go to GR display option, it is saying "document 5..... does not exist in calender year 2008", but if I go to MB03 it is displaying the document, after MB03, if I go to MIGO display, it will display the document. Why it is not displaying for the first time ?
Thanks
nr

Similar Messages

  • Maintain number range object for excise grp

    Hi Gurus,
    During stock transfer, while doing Goods receipt I am getting the below error
    "Maintain number range object for object J_1IRG23D, year 2010, excise group"
    Could anyone please tell me the trans code for maintaining no range for excise group...
    Thanks,
    Raja

    Go to J1I9 T Code for a particular object object J_1IRG23D, execute and then give the excise group and maintain the number series.
    Regards,
    Nagesh
    Edited by: Nagesh MS on Dec 20, 2010 3:59 PM
    Edited by: Nagesh MS on Dec 20, 2010 3:59 PM

  • Maintain number range object for object J_1IRG23C1, year 2008, excise

    Dear All,
    I am doing the purchase cycle for Assets, while doing GR i am getting the below error, pls guide me
    Maintain number range object for object J_1IRG23C1, year 2008, excise
    Maintain number range object for object J_1IRG23C2, year 2008, excise
    B/regds,
    CB

    Dear CB,
    Use Transaction "SNUM", and give the object name as "J_1IRG23C1" and maintain number range for the financial year.
    Do the same procedure for Object "J_1IRG23C2" and maintain the number range.
    Hope this helps.
    Njoy SAP
    -Saravanaganesh

  • Maintain number range object for object J_1IINTNUM

    Dear,
    While doing GRN i am getting this error:
    Maintain number range object for object J_1IINTNUM, year 2009, excise group
    Maintain number range object for object J_1IRG23A1, year 2009, excise  group E1
    Maintain number range object for object J_1IRG23A2, year 2009, excise group E1
    What i did is:
    1) I maintained NR for Objects J_1IINTNUM,  J_1IRG23A1,J_1IRG23A2 in J1I9 Tcode.
    Still i am getting the same error in MIGO.
    Regards
    Utsav
    Edited by: Utsav.agra on Nov 18, 2009 12:24 PM

    Dear Pankaj,
    thanks actually i wans maintaining number as 1 instead of 01.
    Thanks
    Utsav

  • Maintain number range object for object J_1IINTNUM, year 2009, excise group

    Hi SAP Guru !
    Plz tell me the solutions quickly, Even after mantaining the required Objects in "J1I9" , when I am going to post GR , once again it is saying that ........
    1 - >   Maintain number range object for object J_1IINTNUM, year 2009, excise group
           Message no. "4F159" .
    2 - > Maintain number range object for object J_1IRG23A1, year 2009, excise group 21
           Message no. 4F159
    3 - >  Maintain number range object for object J_1IRG23A2, year 2009, excise group 21
            Message no. 4F159
    Regards,
    San

    dear sir
    while maintain number range , in the number column, it should be 01. other than 01, you will get same error.
    so please check it should be 01 in the number column and year and number range interval .
    regards
    jrp

  • Maintain number range object for object J_1IRG23A1, year 2007, excise

    Hi All,
    I have configured CIN in ECC 5.0. When i am doing MIGO getting errror that "Maintain number range object for object J_1IRG23A1, year 2007, " and
    Maintain number range object for object J_1IRG23A2, year 2007, excise group 10
    but i have already maintained number range for  such object.
    please guide me.
    Regards,
    Ravindra

    Hi,
    Which Number u given,
    No    year       From number       to number
    01     2007      1                          10000
    I think u allready given,this is for checking.
    Raghu

  • Maintain number range object for object J_1IRG23A1, year 2011

    hi
    when i try to maintain no range for object J_1IRG23A1 with t code SNRO i get following error
    please specify an existing number range object how to rectify
    Thnx

    Hi
    Please use the following document to configure the CIN specific number ranges. Hope steps mentioned here help you.
    http://help.sap.com/bestpractices/BBLibrary/html/J81_ProcStockMaterial_EN_IN.htm
    Nishant

  • Maintain number range object for notification (IW20)

    Dear All,
    Need help. Is there any configuration to "Define Number Range" for Notification Types.
    I'm using SAP R/3 4.7
    While using SPRO, the path is:
    Plant Maintenance and Customer Service -> Maintenance and Service Processing -> Maintenance and Service Notification -> Notification Types -> Define Number Ranges
    Then execute, click Group, select "PM Notofication", then click change. In my system the status of menu Edit -> Insert Interval is disabled. Is there any configuration to turn on this "Insert Interval" option?
    Many thanks in advance

    dear ian
    whatever procedure you followed is almost right,after selecting the PM notification don't press the change button , instead of that select PM notification and select <b>Interval</b> in the menu bar and <b>maintain</b> .then you can maintain the number ranges
    regards
    thyagarajan

  • Transaction maintaining "number range objects" for IDOCs

    Hi everybody,
    does anybody know how to mainstain the number ranges for the different IDOC Types?
    Thansk
    Regards Mario

    Hi,
    we do not need an answer.
    Thaks

  • Error in MIGO :Number range object for object J_1IINTNUM, year 2010, excise

    Dear Experts,
                              While  posting  MIGO, System throws below error : 
    Mainintain number range object for object J_1IINTNUM, year 2010, excise
    Maiintain number range object for object J_1IRG23A1, year 2010, excise
    Maintain number range object for object J_1IRG23A2, year 2010, excise
    Actually we are posting the MIGO for the  fiscal year 2009, still i am getting error  why ?
    regards
    rajakarthik.

    check the posting date what u r puting , it should be on or  before 31/03/2010
    i think this is only the issue dont looks like any other issue
    or do one thing just o\go in SNRO and for J_1IINTNUM object put 9999 year and the number range
    and try to post your transaction in 2009
    hope this helps
    Edited by: Umakant Bhangale on Apr 1, 2010 10:22 AM

  • Number Range Object maintained programatically

    Hi,
    I have custom number range object. I need to maintain this by programatically and NOT using transaction code SNRO. (ie create new instance, maintain Maximum number , delete instance etc)
    Anybody having a piece of code or info on this ?
    Your help will be appreciated.
    Thanks
    Sa_R

    hi Sa_R,
    u can try using the "ABAP Debugger",
    this transaction use the program "SAPMSNUM", go to SE80 and Display the Program, it's using the Function to show / edit the range's.
         CALL FUNCTION 'NUMBER_RANGE_UPDATE_INIT'
              EXPORTING
                 OBJECT           = OBJECT
              EXCEPTIONS
                 OBJECT_NOT_FOUND = 1.
         IF SY-SUBRC NE 0.
            MESSAGE A010 WITH OBJECT.
    maybe it can help u.
    Regards
    Allan Cristian

  • Number range objects not maintained properly...??

    Am doing a Purchase Requisition for asset material. While saving the PR document am getting error like
    I have went to SNRO and checked asset number range object ANLAGENNR , there intervals are maintained. i couldn't go further with the issue, Can anyone help me with the solution please?
    Regards,
    Naveen

    Hi,
    Please
    1. Go to transaction code J1I9
    2. Give object name as BANF.
    3. Click on Number Ranges.
    4. Click on Intervals
    5. Maintain Intervals
    6. Save
    Hope, your problem has been resolved else revert.
    Regards,
    Tejas

  • Number Range Object For following object is not maintained for year 2008,

    Hello Together,
    Now the 2008 year has begun.....All the number range object in Excise related process ( CIN ) has to be changed.
    I would like to know whether i need to change the only Year in SNRO or i have add new year in that setting.
    Below is the example :-
    Ranges   Year      From Number       TO Number   Current Number
    01           2007     001000000            99999999     10001013
    If i change only year i,e. insted of 2007 i will change 2008....what will be impact?
    Please guide
    Thanks in advance
    Shailesh

    go to J1I9-select the object--here maintain a new year for the same number range:
    Ranges Year From Number TO Number Current Number
    01 2007 001000000 99999999 10001013
    01 2008 001000000 99999999
    give enter---save.
    regards,
    indranil

  • Interval 01 was not created for number range object HRTEM_REFN

    Dear expert!
    Now, I'm getting some issues in Training and event management module.
    - The first, I created business event
    - Second, I process to book for business event by tcode: PSV1 --> book --> book/payment info --> activity allocation.
    But when I was booking, the system displayed error: "Interval 01 was not created for number range object HRTEM_REFN"
    Help me, please!
    Best regards, Huy!

    Go to the customization as below
    Training and event mgt>Basic settings>Number range maintanence>Define number ranges for External operation
    and maintain number ranges as 01 Internal
    Hope ur problem will solve
    with regards
    partha

  • No authorization for number range object type BTI and activity SHOW

    Hi All,
    When I try to execute
    SAP Easy Access screen - > Auto-ID Infrastructure -> Master data -> Number Ranges -> Number Range Administration
    on the next web window when I select the object type BTI , it comes up with the error
    Number range table not maintained for object BTI in customizing  
      No authorization for number range object type BTI and activity SHOW  
    I am using AIN 5.1 .  Is this an authorization issue ?. If so which all roles I should give to the user?  IF you have any idea about this please share some tips.

    Hi Sahad,
    Only few number range object types are available in the standard system:
    Follow the link for help .
    http://help.sap.com/saphelp_autoid2007/helpdata/EN/45/e2240c7abb56dde10000000a114a6b/frameset.htm
    Follow the for setting up the others.
    http://help.sap.com/saphelp_autoid2007/helpdata/EN/45/e2240c7abb56dde10000000a114a6b/frameset.htm

Maybe you are looking for

  • Itunes library tranfer from one hard drive to another on the same computer

    Hello I have two hard drives on my mac g4 and the first has 80gig and i only have 10 gig of memory left to fill in my ipod library so... I want to move the itunes library/song data from one hard drive to another, how do I do this? the ipod has the ab

  • Cisco wastefulness : 3845 fan module

    We had a fan fail on our 3845 edge router. No big deal; the other two fans kept the temperature easily within spec, and the module is a two minute hot swap. I opened a ticket, they sent me a replacement. Simple. (In fact, the router install docs note

  • Getting High cpu in s720 due to snmp(Prime)

    Hi Team, We are getting high cpu Spike in our all distribution switches in many locations. Also we found our Cisco prime infrastructure causing the high cpu.but the spike only for 20 to 30 seconds. If we deny the PI there will be no CPU spike.. Is th

  • Want to check the fields content

    Hello Experts,    I  am having a requirement where in particular code has to get executed only if the value of the field is a number.         LOOP AT lt_line.           TRANSLATE lt_line-tdline USING ',.'.           MOVE lt_line-tdline TO l_aux_tare.

  • ADDED A NEW APP

    I just installed a free app on my phone, but it doesn't appear on my apps section...does not give any options to open or start it.  When I go to the settings page, it shows the app installed...how do I run it?  Thanks.