Maintain number range

Hi
whether no. range should be maintained for cost centre & profit centre accounting?
if yes then how  can i manintain it &  how can i   copy for the next fiscal year.
                   ankita

Dear Ankita ,
    In Controlling the Number ranges are maintained in txn CODE:   KANK .  You can thereafter assign your groups inside and create the number ranges inside as per requirement .
   please assign points if found useful
regards
Deepesh

Similar Messages

  • Maintain number range object for excise grp

    Hi Gurus,
    During stock transfer, while doing Goods receipt I am getting the below error
    "Maintain number range object for object J_1IRG23D, year 2010, excise group"
    Could anyone please tell me the trans code for maintaining no range for excise group...
    Thanks,
    Raja

    Go to J1I9 T Code for a particular object object J_1IRG23D, execute and then give the excise group and maintain the number series.
    Regards,
    Nagesh
    Edited by: Nagesh MS on Dec 20, 2010 3:59 PM
    Edited by: Nagesh MS on Dec 20, 2010 3:59 PM

  • Maintain number range interval 01 for posting change notices

    Hi,
    I am doing transfer posting using movement type 321 (quality to unrestricted) for one material.While posting i am getting error"Maintain number range interval 01 for posting change notices" Message no. L0015
    WM is active for this material and doing this movement for one plant which is newly created in system.Wil you please advice for which document type i had to maintain number range.Please inform SPRO path / Transaction to be used to make required changes.
    Thanks & Regards
    Atharva

    Maintain number range for posting change in tcode  OMLW

  • Re : Maintain number range interval "" for quants

    Hi
        While doing the transfer order i am getting the following error.
    " Maintain number range interval "" for quants "
    How to solve this.
    Thanks
    Anto

    dear sir
    go to Tcode : OMLW click for quants tab, give your warehouse number and maintain the number ranges, for your warehouse.
    Regards
    jrp

  • Re : Maintain number range interval "1" for quants

    Hi
           While creating transfer order the following error is coming.
    " Maintain number range interval "1" for quants "
    How to solve this.
    Thanks
    Mani

    Dear,
    Enter t-code OMLW.
    Click on tab of For Quant.
    Then maintain number range.
    Regards,
    Mahesh Wagh

  • Maintain number range interval "01" for inventory documents

    hi,
    when i am creating a physical inventory creating document t.code LI01 i got this eror:
    Maintain number range interval "01" for inventory documents.where i have to maintain please reply me.
    naveen

    hi,
    spro->log.execution>warehouse mgmt->activities->physical inventory---->maintain number ranges.
    Regards,
    velu

  • Maintain number range object

    Hello Friends,
    When I am doing a Goods Receipt, system is giving the message " Maintain number range object for object J_1IRG23A1, year 2008, excise group 50". What to do for this. Please tell me.
    Regards,
    nr

    Hai
    Thank you very much, it is working , I have saved GR, but now when I go to GR display option, it is saying "document 5..... does not exist in calender year 2008", but if I go to MB03 it is displaying the document, after MB03, if I go to MIGO display, it will display the document. Why it is not displaying for the first time ?
    Thanks
    nr

  • Maintain number range object for object J_1IRG23C1, year 2008, excise

    Dear All,
    I am doing the purchase cycle for Assets, while doing GR i am getting the below error, pls guide me
    Maintain number range object for object J_1IRG23C1, year 2008, excise
    Maintain number range object for object J_1IRG23C2, year 2008, excise
    B/regds,
    CB

    Dear CB,
    Use Transaction "SNUM", and give the object name as "J_1IRG23C1" and maintain number range for the financial year.
    Do the same procedure for Object "J_1IRG23C2" and maintain the number range.
    Hope this helps.
    Njoy SAP
    -Saravanaganesh

  • Maintain number range object for object J_1IINTNUM

    Dear,
    While doing GRN i am getting this error:
    Maintain number range object for object J_1IINTNUM, year 2009, excise group
    Maintain number range object for object J_1IRG23A1, year 2009, excise  group E1
    Maintain number range object for object J_1IRG23A2, year 2009, excise group E1
    What i did is:
    1) I maintained NR for Objects J_1IINTNUM,  J_1IRG23A1,J_1IRG23A2 in J1I9 Tcode.
    Still i am getting the same error in MIGO.
    Regards
    Utsav
    Edited by: Utsav.agra on Nov 18, 2009 12:24 PM

    Dear Pankaj,
    thanks actually i wans maintaining number as 1 instead of 01.
    Thanks
    Utsav

  • Maintain number range object for object J_1IINTNUM, year 2009, excise group

    Hi SAP Guru !
    Plz tell me the solutions quickly, Even after mantaining the required Objects in "J1I9" , when I am going to post GR , once again it is saying that ........
    1 - >   Maintain number range object for object J_1IINTNUM, year 2009, excise group
           Message no. "4F159" .
    2 - > Maintain number range object for object J_1IRG23A1, year 2009, excise group 21
           Message no. 4F159
    3 - >  Maintain number range object for object J_1IRG23A2, year 2009, excise group 21
            Message no. 4F159
    Regards,
    San

    dear sir
    while maintain number range , in the number column, it should be 01. other than 01, you will get same error.
    so please check it should be 01 in the number column and year and number range interval .
    regards
    jrp

  • Maintain number range object for object J_1IRG23A1, year 2007, excise

    Hi All,
    I have configured CIN in ECC 5.0. When i am doing MIGO getting errror that "Maintain number range object for object J_1IRG23A1, year 2007, " and
    Maintain number range object for object J_1IRG23A2, year 2007, excise group 10
    but i have already maintained number range for  such object.
    please guide me.
    Regards,
    Ravindra

    Hi,
    Which Number u given,
    No    year       From number       to number
    01     2007      1                          10000
    I think u allready given,this is for checking.
    Raghu

  • Organizational Management- Maintain Number Ranges

    Hi All
    In menu path :
    Personnel Management -> Organizational Management -> Basic Settings -> Maintain Number Ranges -> Maintain Number Ranges
    I have maintained the number ranges as mentioned below
    Job(C)  10000 to 20000,
    Position (S)  20001 to 30000,
    Org Unit (O)  30001 to 40000 .
    After maintaining i have saved in a Transport Request .
    Now am importing it in to the Quality .  In Quality i am getting only the Objects Job , Position , Org  Unit but the number ranges
    maintained above is not imported .
    Kindly let me know what  is the problem .
    Pls send me the solution how to transport the number Ranges .
    I would appreciate for an earliest response .
    Thanks in Advance

    Hi,
    Please check below SAP wiki link which will guide you and show different settings that may be required to accomplish along with issues you may face.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=64259392
    Thanks,
    Ameet

  • Maintain number range interval for master data upload for existing employee

    Hi  Experts,
    1)I have the scenario to upload additional data for existing employees in PA. Employees are already existed in SAP HR , But additional Infotypes are required to maintain for those emploees
    2) I have the senario where i have to upload master data for new employees.
    Pls give the detailed description of how to maintain number range interval i.e. External or Internal for upload in both the above scenario. Do we have to maintain number range manually in master data record & then upload it Through BDC or LSMW?
    << Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
    Edited by: Rob Burbank on Jan 12, 2011 3:49 PM

    >
    s c patil wrote:
    > 2) For new employees i have to maintain desired ( my or client?) number range in SAP system as External number range & then default that number range in NUMKAR & then maintain those number range in master data record & then get the data template filled by client & then upload the data & after that create new number range which is next to existing External number range as an  Internal number range. & then default that Internal number range.
    >
    > Pls reply ASAP
    Yes Mr. Patil...
    For existing employees
    you need to execute HIRING ACTION Through BDC with External number range. While recording you have to use atleast three infotype i.e. IT0000,IT0001,IT0002. In addition you can upload other infotype through PA30.
    For new employees
    While configuration you can create another number range as internal  for new hiring. and use NUMKR feature as well.
    Here I don't understand that why r u looking for upload process for new hiring, if it is not mass hiring. It should be day to day activities which would be done by user through PA40.
    Best Regards,
    Anand Singh

  • Maintain number range interval "" for inventory document --help!

    Dear all,
       I running the FM - L_INV_DOC_CREATE for creating the physical inventory doc for WM ( warehose management ) level. But i get this error -> Maintain number range interval "" for inventory document. If i try to create it using the t-code  LI01N,everything goes smoothly. Anybody haf any idea how to solve this? thank you.

    1.Did u go into Number ranges for WM?
    Yes
    2.Did u click on assignment & number ranges not on Number range intervals
    Yes
    3.Di du cahnge it to 02 for all?.
    Yes on first warehouse 111 all changed to 02 and on warehouse G02 just on TR and TO changed to 02
    4.Did u select NR intervals? and give the number range?
    Yes
    5.Did u transport the intervals?
    No, as I am working on DEV practice client. Dont need to transport.
    6.Did assign the number rabges to ur Warehouse?
    I assigned No. 2 to warehouse, not number range, can u ellaborate more on number range assignment.
    I created migo for same material with different storage location and material and accounting documents are created. Even the number ranges are working on another warehouse created by colleague, but its not working on my warehouse and as mentioned earlier this is Dev practice client. No need to transport.

  • Maintain number range object for object J_1IRG23A1, year 2011

    hi
    when i try to maintain no range for object J_1IRG23A1 with t code SNRO i get following error
    please specify an existing number range object how to rectify
    Thnx

    Hi
    Please use the following document to configure the CIN specific number ranges. Hope steps mentioned here help you.
    http://help.sap.com/bestpractices/BBLibrary/html/J81_ProcStockMaterial_EN_IN.htm
    Nishant

  • Error message when maintaining number range for controlling area

    hello everybody:
    I am just creating a new controlling area in current system, it's ok for me to maintain (tcode KANK)the CO number range in Development system, but when comes to QAS, I want to maintain the number range groups (F6) manually, but not possible. A error message is throwed out by SAP saying:
    No elements exist for the object/sub-object 0060.
    Message no. NR004.
    Can anyone give me any suggestion on what reason this message comes?
    Regards.
    Andy

    Hello Andy,
    Please apply the OSS note 4958. This will help you to solve the problem with error NR004 and to define the CO number range objects.
    Kind regards,
    Carmen

Maybe you are looking for

  • Changing document name per approval stage

    Hello All, I need to use the Purchase Order interface both as a Purchase Requisition and a Purchase Order. Basically, I have setup an approval stage for PO. Before the approval takes place, the document is considered a PR and post approval a PO. Sinc

  • BOM in standard PURCHASE order/requisition

    I would like to use BOM as a specification of a "group" of materials procured many times in the same or similar configuration.(eg. servers with specific configuration listing all parts). Is it possible, to use material BOM in standard purchase order

  • Developed in Jdev 11.1.1.2 and deployed into stand alone WLS 10.3.1

    Hi Gurus, Currently we are using JDeveloper 11.1.1.2 and deployed a sample web application into integrated WLS and its working fine with skins and page-templates. We are using stand alone Weblogic 10.3.1 version. When i deployed the same application(

  • Performa Monitor Connection Cables

    A friend has a sick SE that he wants to replace as inexpensively as possible, and I have a Performa 6115CD that I'm willing to give him just to get it off my hands (I'm about to move into smaller digs and need fewer toys anyway). I discovered this af

  • SharePoint 2013 Community Template – The Spelling ICON is greyed out when replying to a discussion on a discussion board

    <meta content="text/html; charset=windows-1252" http-equiv="Content-Type" /><meta content="Microsoft Word 14 (filtered)" name="Generator" /><style></style> Much like the title says the Spelling ICON is greyed out.  When I go to the Discussion List an