Maintain one PIR but for 2 different set of conditions

Hi Expert,
If i want to maintain PIR for material ABC, vendor 123, plant 1000 and purchase org 2000 but for this PIR i want to have more than one net price and order unit. In PIR i can only see there is one field to put the price in General view and only one order unit. How can i add another one for the same PIR? Currently i have to change it manually whenever i want to use the other unit and price. Can anyone please help?
Thanks

Hi,
If i understood your issue correctly. i.e you have different UOM for same Material.
Assuming EA and BX i.e BOX,
Now please check the folloiwng:-
1. see if you have defined Alternate UOM in Material master and defined X EA = 1 BX relations.
2. Check and define the Purchasing UOM i.e in Purchasing View as BX.
Now you can maintain the Net price in PIR for the Base UOM i.e EA and still get the price of the BX in you PO.
Hope this helps.
Thx
MJ

Similar Messages

I have only one ID, but I have different passwords for my iPhone and iPad. How to fix that?

I have only one ID, but I have different passwords for my iPhone and iPad. How to fix that?

Hi Cristigil,
Are you talking about your lock screen passcode? If so, go into Settings>General>Passcode Lock, and Change one of your Passcodes to match the other.
Hope this helps!
Cheers,
GB

Duplicated report with different set of conditions

I have just duplicated a report in 10g and apparently I'm not allowed to have different conditions/limitations in the new report. If I change a condition in, say, the new report, it affects the original report and the condition will change according to the changes made.
Is it really true that you can't have different sets of conditions in two otherwise similar reports (one duplicated from the other)?
Thanks in advance!

Had to chime in on one thing here.
I agree with Michael that most companies SHOULD use Disco Plus as their primary Disco tool for developers and maybe have one copy or so of Disco Desktop for a couple of little things (ie: subqueries - which aren't really sub-queries but that's another story), saving to disk, etc.
At many clients and presentations I strongly recommend the ol' 95 / 5 / 1 rule being that you have 95 users using Viewer, 5 users using Plus and maybe 1 with Desktop (and most likely that's the 1 with Admin as well).
However - and it's a big however - is that I've seen many clients that have a problem with the way their situation has been set up (ie: their intranet, their databases, their security, their iAS, etc. - so that Disco Plus runs so much slower than Desktop, that developers end up keeping Desktop and using it!
It's a crummy situation but when using 3 tier architecture, there seems to be a mental block with many companies that you have to up keep that 3rd tier (ie: the Disco Server for Plus / Viewer).
And as for the $1200 bucks - again Michael is quite right. Of course, no company would have many more client / server copies out there that they've 'registered' ... right?
So, unfortunate though it may be, I think keeping the Disco Desktop examples may prove valuable for many developers ... until that day Oracle finally ejects it.
Russ

How to restore Iphone 4 content but for a different carrier?

Hello,
I just recently unlocked my iphone 4 and backed it up before doing the factory reset. When I inserted the new sim card for a different carrier I wasn't able to restore my old content (music, photos, contacts, etc). Is there any way to restore all my old data without going back to my old carrier? Or a way for my phone to recognize my new service with my old content.
Thanks

If you select the Download Only, which is what I do all of the time, even with a broadband connection, once it is finished downloading, you go back to the Check for Update button in iTunes and it will detect the file there and then begin uncompressing the file and installing it. After the upgrade you will not need to restore the firmware, just restore your backup.

I had my ipod for almost a year now and it the ipod touch with a camera. the new one. But today when I set it down for 2 seconds it STOPPED working. its been charging for an hour now. still not turning on. I didnt drop it. Whats wrong??

the title says all

Did you try to reset your device by pressing the sleep and home button for about 10 sec, until the Apple logo comes back again? You will not lose any data doing a reset.
If this does not work, try to connect in recovery mode, explained here: iPhone and iPod touch: Unable to restore
Message was edited by: Ingo2711

I get emails from apple id but for a different name

I got an email from Apple ID to reset my Apple ID security questions and answers but it was addressed to a different name. I changed my password just in case but my account seems fine. Could someone have accidentally set up an account with my email address instead of theirs and how do I get my email address removed from their account?

Your Apple ID must be an email address to use it for and iClouid account. If it isn't in the form of an email address you can change it so is by following this guide: http://support.apple.com/kb/HE40. The ID must also have an active email address associated with it. If it doesn't, first go to appleid.apple.com and add one before trying to use the ID for iCloud.

Only one audio out for a speaker set that requires 3 ??

Hi,
I just got my splendid MacBook pro today and I put my PC for sale simultaneously.
Switching to Mac was a charm - I'll save the details - but only one thing is still bugging me :
I've got a Logitech Z-640 speaker set. The center speaker is the one to connect to the computer (or audio card whatsoever).
Well, it has three plugs, since it's a surround speaker set.
But, my MacBook only has one (the earphone plug indeed).
So if I plug the "green" plug, everything seems to work.
I unpress the "matrix" button on the center speaker and they all work, including the subwoofer.
On my PC I used to have a small application that would "test" them (make each speaker play one by one, so you could tell that they are all controlled independently and therefore that surround sound is enabled).
I couldn't find anything like that on OSX - is there a feature like that ?
And do you think I'll still be getting surround sound effects even though I could only connect one of the three plugs ?
Any other suggestions ?
And is there some kind of devide, like a USB one, that would let me connect the three plugs ? Is it worth it ?
THANK YOU FOR YOUR ANSWERS !!!

Congratulations on your new mac. It is a great machine.
First of all, the MacBook Pro actually has 2 audio outputs -- they are just collocated. One is the analog headphone jack and the other is a mini toslink digital optical port.
The "green" plug you refer to is just a stereo analog input. The "matrix" feature of your speaker system is just simulating surround sound. If this is OK with you and you don't want or need true surround sound that is just fine.
There is equipment available that can separate and convert the digital optical output signal into discrete analog channels, but this equipment is highly specialized professional gear. You're not going to spend $1000 to hook up a $50 speaker set.
If you want true surround sound, you should upgrade to a speaker system that will accept a digital optical input, normally referred to as toslink or s/pdif.

I have kernel panic too! but for a different reason...

hey all
my macbook has recently started experiencing kernel panic and i cant figure out why.
the first time it happened i used disk utility to verify the hard drive. DU said the hard drive needed to be repaired. i tried to boot up from the OSX 10.4 disk that came with my computer, but my computer wouldnt boot. so i booted up from disk warrior instead. i rebuilt the directory, ran the hardware check (no probs reported) and had DW check all files and folders. DW reported one corrupt .plist file. (i have looked at every single .plist file in the folder DW told me to but the corrupt file is nowhere to be found.) however, when i booted up normally and ran disk utility again DU said my hard drive was fine.
then kernel panic struck again. did a little research and found apple jack. ran all 5 of apple jack scripts and AJ also said all is well.
kernel panic again. used cleanapp to delete some old programs and empty caches. manually deleted about 80% of .plist files hoping that one of them would be the corrupt one. DW still reports one corrupt .plist file. so i decide to wipe the computer and do a clean install of 10.4. but when i try to open the OSX installer (from the disk that came with my computer) i get a message that says 10.4 cant be installed on this computer... that it isnt compatible. ***?
more research and this time decide on tech tools pro. run every test TTP has to offer and everything checks out fine.
so... now i dont know what to do. and my computer just had kernel panic again this morning. i pasted the report from it below. i dont know enough to tell if theres anything in there that explains whats wrong with my computer.
can anyone out there help me? in the very least can anyone tell me how to get my computer to recognize that it is compatible with 10.4 so i can erase everything and start again?
bah! this *****. thx in advance for any help you can give...
(kernel panic report from this morning)
panic(cpu 0 caller 0x001A49CB): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0xeeeeeef2, CR3: 0x00e7e000, CR4: 0x000006e0
EAX: 0xeeeeeeee, EBX: 0x00001e8b, ECX: 0x03a29988, EDX: 0x000002cd
CR2: 0xeeeeeef2, EBP: 0x2521bf78, ESI: 0x0000d5eb, EDI: 0x2521bee0
EFL: 0x00010206, EIP: 0x005a67e3, CS: 0x00000008, DS: 0x00000010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x2521bcd8 : 0x128d0d (0x3cc65c 0x2521bcfc 0x131f95 0x0)
0x2521bd18 : 0x1a49cb (0x3d2a94 0x0 0xe 0x3d22b8)
0x2521be28 : 0x19b3a4 (0x2521be40 0x2ce 0x51 0x19b430)
0x2521bf78 : 0x13d989 (0x0 0x0 0x2521bfc8 0x39a8fc)
0x2521bfc8 : 0x19b21c (0x0 0x0 0x19e0b5 0x4a98c14) Backtrace terminated-invalid frame pointer 0x0
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Model: MacBook2,1, BootROM MB21.00A5.B07, 2 processors, Intel Core 2 Duo, 2 GHz, 2 GB
Graphics: Intel GMA 950, GMA 950, Built-In, spdisplaysintegratedvram
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.4.4
Bluetooth: Version 1.9.5f4, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK2035GSS, 186.31 GB
Parallel ATA Device: HL-DT-ST DVDRW GWA4080MA
SCSI Device: SCSI Target Device @ 0
USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
USB Device: Hub, Up to 480 Mb/sec, 500 mA
USB Device: SoundSticks, harman/kardon, Up to 12 Mb/sec, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., Up to 12 Mb/sec, 500 mA

fettered, welcome to Apple Discussions.
Understanding crash logs isn’t easy and it’s hard (sometimes impossible) to decipher the cause of the problem. Take a look at Apple’s Crash Reporter document at http://developer.apple.com/technotes/tn2004/tn2123.html
Also look at Tutorial: An introduction to reading Mac OS X crash reports
http://www.macfixit.com/article.php?story=20060309075929717
Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. What external devices do you have connected? When trying to troubleshoot problems, disconnect all external devices. Do you experience the same problems?
To eliminate RAM being the problem, Look at this link: *Testing RAM* @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
May be a solution on one of these links.
Mac OS X Kernel Panic FAQ
Mac OS X Kernel Panic FAQ
Resolving Kernel Panics
Avoiding and eliminating Kernel panics
12-Step Program to Isolate Freezes and/or Kernel Panics
 Cheers, Tom

One Album But Sorted As Different Albums

I recently imported a cd that I bought into Itunes. The problem that Im having is that even though the artist may have some guest features on the album. It still sorts the album as one thats completely different. It makes cover flow look bad and everything else sloppy. Ive tried changing things in the INFO tab, and also in the SORTING tab. Ive removed track numbers placed them as a compilation and that work but now it shows Various Artis and all the songs or linked together. But now I have the Various Artist problem.

Not sure how removing track numbers can help here.
I think what you need to do is make sure that the Album Artist field is filled in with the same info on all of the tracks. Maybe fill it in with the primary artist or the name of the album instead of Various Artists.

_WI_RESULT has one value but workflow follows different path

Hello,
I have a strange problem - I have a task which is defined against the standard BOR method EMPLOYEET->ENQUEUE
this tries to lock an employee.
if it fails it should let me know and the outcomes of the task should vary - I use two of these outcomes.
Operation performed successfully - which maps to result = 0
Operation performed with errors - which mapps to result = 1.
Now I have a workflow where the result was clearly 1 - I can see in the container of the workitem that WIRESULT = 1.
yet the workflow has continued off along the path "Operation performed successfully".
As you can imagine, I'm slightly puzzled.
Is there anything that might have happened to my task/WF that could have distrupted the link between the task and the outcomes?
Several years ago and a different system 4.6C now ECC6 this worked just fine.
I could just build another decision step in the WF - but I don't think I should need to.
Edit - just been playing with the WF - did a check and got this message:
Indicator "Results Parameter" missing in BOR method ENQUEUE
Given that this is a standard method should I worry?
Any suggestions on what might be going wrong and especially how to fix it, much appreciated.
Cheers,
Chris
Edited by: Chris Paine on Apr 1, 2010 1:44 PM

Hi Aman,
yes I did bind all the container elements.
Perhaps I was not clear - the issue is that the workflow is following one of the "outcomes" of the task.
These outcomes are generally driven by the generic task container method WIRESULT.
Yet the workflow does not seem to follow this logic and is ignoring the value of WIRESULT and continuing with the default "outcome".
I have changed the WF to make a decision on the error message which is a parameter returned by the BOR method (and yes I have bound it) - so it works - but why is it that this behaviour (which I am sure used to work) no longer does?
Cheers,
Chris

More than one custom Component for a Component Set

Hi All,
I developed a GenIL object from the scratch and created a component that it has it as reference. Now, I am intending to add this new component into an existing (standard) Component Set (CRM_CMG).
This component set already has a custom component and it is working fine but, after adding the second component, when trying to enter into the BSP_WD_CMPWB for the corresponding component, I am getting the following error: "BOL component set CRM_CMG does not exist; check runtime repository".
The place were I created the component and added it into the Component Set is: SPRO->Customer Relationship Management->CRM Cross-Application Components->Generic Interaction Layer/Object Layer->Basic Settings.
Does anyone know why this is happening and/or how to solve it?
Regards and Thanks in advance.
Alejandro.

Hi,
If you need to perform the checks while using a maintenance view, you can do this with modification events. e.g. just implement a form that triggers your custom checks in a "before save" event... (SE55->Environment->Event)
Kr,
Manu.

How to work on one project but with two different computers

I'm editing a movie.
My computer might be overwhelmed with all the information - speed is slowed and it gets hot quickly.
I would like to use my second computer where I have cloud installed
to edit on the same timeline or in a different sequence to give my
main computer a rest.
Is that possible?
Thank you for your help!

As well as the reply from Anish about using your program on 2 computers, you need to ask in the program forum for how to best use the programs to do what you want
http://forums.adobe.com/community/premiere_elements/content
http://forums.adobe.com/community/premiere/content

Question on iCloud accts: I have my iPhone and iPad on one account, but my Mac is set up on my old mobile me acct. Can't figure out how to change an iCloud account number on my Mac so I can sync all three.

Question on iCloud accounts: I have my iPhone and iPad on one iCloud account, but my Mac is on my old Mobile me account. Can't figure out how to change my iCloud account on my MacBook Pro so all 3 are synced.

First, open System Preferences > MobileMe and log out. Then, open  > About this Mac and see Version. If you see 10.5.x or 10.6.x, see > http://www.apple.com/osx/specs If your Mac is compatible, upgrade to Mac OS X Snow Leopard 10.6.8 and purchase OS X Mountain Lion.
When you have upgraded, go to System Preferences > iCloud and follow its steps

Dimension works for one and but for others

I have a situation in which all dimensions-- D1,D2,D3,D4,D5,D6 are joined to a Fact--F1. (both in physical and BMM)
all the dimension hierarchies are added in Fact content mapping...
In my report, I use columns from D1...D5 and F1....it works great....but it doesnt work when I add D6. I tried to get through this...and found that it doesnt work only if columns from D3 & D6 are used in the report. If either of the columns are removed it works fine..
I get this error...
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
*State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: Dim - Product.Product Number. Please fix the metadata consistency warnings. (HY000)*
Hope you understood my situation. If not, please let me know I can explain it better. :)
Please help

Hi,
Can you please let me know, if you have created the hierarchies for all the dim3 and dim6 dimensions? In case, not can you please create hierarchies for these dimensions and update the fact table sources accordingly so that the BI Server can understand better the grain of the fact and able to generate the query?
Hope this helps.
Thank you,
Dhar

HT1349 I have just bought Ipad 2 32gb -WiFi -3g can you tell me do I just use one Apple Id for all different section that need ID & password - I Cloud

I have just bought an Apple Ipad 2 32gb - Wifi -3G my question is do I use the same ID e-mail - Password to start a new Account with I Cloud

Not quite sure what you are asking... But, See Apple ID here...
http://www.apple.com/support/icloud/getstarted/

Maintain one PIR but for 2 different set of conditions

Similar Messages

Maybe you are looking for