Maintain output condition table for billing documents

Hi
I need to create new output condition table for billing document with the key combination of "Billing type and Export Indicator". In Field catalog: Messages for billing documents I am able to find field Export Indicator but the same field i am not able to find creation of new condition table (V/63).. Kindly let me know is there any settings required to show the same in V/63.
Thnaks
Srinivas

Hi Ram
The filed already is there in in structure" KOMKBV3" ....
Thanks
RAO

Similar Messages

  • Maintain output condition record for material documents

    Please help me with transaction code to " maintain output condition records" for material documents

    Hi,
    Is it MN21 transaction you are looking for?
    Cheers,
    HT

  • Maintain output condition record for KONS

    Dear all friends,
    Anybody help me to maintain output condition record for KONS during consignment cycle.
    when,where and how i can maintain the output condition record for KONS
    thanx in advance.
    best regards,
    Rajesh

    use MRM1 t-code for KNOS.

  • Change Condition Record for Billing Document

    Hi All,
    I want to change the condition value(0) for billing document, if condition record statisfy some checks.
    Which user exit I have to use to change the condition records while saving the billing document.
    Thnaks
    Mugunthan

    Hi,
    You have to create a new VOFM pricing routine to change the value
    Thanks,
    Naren

  • Condition table for Material document printout

    When i try to create a condition table with 2 fields Movement type/plant combination
    i am getting this warning message
    Switch: Field BWART cannot be used (table KOMB)
    Message no. VK770
    i pressed enter to pass the warning message
    When i try to create conditions with the same combination Mvt type/plant for that output type
    i am getting this error
    *Flow control: Entry SAPMV13B, SEE2, A0, *   , 1570, * is missing in T185*
    Message no. V0102

    Hi
    Here i am not seeing any field BWART
    in T681F table for application ME
    Edited by: Sachein on Jun 24, 2011 2:24 PM

  • Table for billing documents not posted  to acounting

    Hi ,
    Could you let me know the table  name wherein we can find biling documents not posted to accounting and has vbx3 error?
    Thanks,
    Praveen

    HI, friend
    Actually, you can use tool ST05 to do a simple SQL Trace.
    You can check table VBRK, field RFBSK (Status for transfer to accounting)
    Value Range is as below:
                   Error in Accounting Interface
    A     Billing document blocked for forwarding to FI
    B     Posting document not created (account determ.error)
    C     Posting document has been created
    D     Billing document is not relevant for accounting
    E     Billing Document Canceled
    F     Posting document not created (pricing error)
    G     Posting document not created (export data missing)
    H     Posted via invoice list
    I     Posted via invoice list (account determination error)
    K     Accounting document not created (no authorization)
    L     Billing doc. blocked for transfer to manager (only IS-OIL)
    M     Analyst Approval refused (only IS-OIL)
    N     No posting document due to fund management (only IS-PS)
    Wink

  • Transaction to maintain output conditions for material Doc

    Please help me with transaction code to " maintain output condition records" for material documents

    Hi,
    You can use tcode NACE to almost access any area for output conditions.
    MdZ

  • Creation of output condition table

    Dear Experts,
    I am trying to use V/57 for creation of new condition tables for sales documents output. I am not finding the new tables creation option here.
    Can you please guide me as to how new tables can be created for output determination ?
    Best Regards,
    Kumar

    Hi,
    You are correct, in V/57 Initial screen shows only change Condition table
    From the menu, select Condition> Create
    Then you can create condition table.
    Regards,
    Sharan

  • Set up output condition for billing document.

    Hi, experts,
    I wanna email billing document to our customers, how can I set up this output condition for billing document?
    Thanks for your help.

    You can maintain masterdata for the email outputs for billing application in VV31.
    You can change the same or display in VV32 and VV33 respectively.
    Tcode for maintaining output masterdata
    For sales orders,  VV11, VV12, VV13
    For deliveries     VV21, VV22, VV23
    For invoices       VV31, VV32, VV33
    Reward points please!!!
    Message was edited by:
            Navaneetha Krishnan

  • Proposal of output for Billing Document

    I have defined a new output type ZDNM-Debit Note via Mail (Medium=5-External send).
    The ZDNM output type has been added to the Output determination procedure.
    Using VV32 I have created the Proper condition record. But when I create a Billing document this new Output <b>is not proposed automatically</b>. But I can go to VF02 and add mannually the new output.
    If a change the Medium to 1-Printout then when the billing document is created I get also an automatic proposal for the new output ZDNM.
    What is wrong? Am I missing something ? How can I check that my customizing is correct ?

    Hi
    Pls maintain the condition records for the output in VV31.
    Also, please ensure whether your settings for email in SCOT/SPAC transaction codes is maintained to enable the email being sent to the desired email id.
    Check whether the Access to conditions check box is ticked on for the output type. If not, please tick it on and then check.
    Reward if it helps.
    Message was edited by:
            iimnava

  • Output to be blocked for Billing documents, if not released to Accounting

    Hi SAP Gurus,
    We have a requirement, where the Billing documents should not be issued output, if they are not released to accounting.
    The system should not allow the user to issue output for billing documents, if not released to accounting.
    Regards,
    sree.

    Standard routine 62 should be able to suffice your requirement.
    Provided output determination in billing doc should happen from output condition record (VV31).
    If you manaully assign assign output type in billing doc, then system will overlook the requirement.
    In addition to that if your output type is assigned with requiremrnt routine 62 in your output procedure.
    Then till your release tke billing doc to accounting, you will not be able see output type determine in billing doc.
    If you have doubt, whether the output type is getting determined properly or not.
    Then output(header/item) screen in your billing doc(VF02), in menubar select Goto - then choose  Determin. Analysis.
    It will show message that due requirement 62, output determination didn't too place.
    Regards
    JP

  • Header text is not dispalying in english for billing document print output

    Hi All,
    I am working on script for billing document.
    I am maintain the header text for the document.I have enrted the header text in english text is not displaying in print output.If i maintain the text in french i am able to see the output.
    I am logging into the system with lanauage EN only.Can yo please let me know how can i displzy english text in my print output.

    Pass SY-LANGU as the value for input parameter LANGUAGE in FM READ_TEXT.
    Regards
    Vinod

  • The output problem for billing document.

    Hi,
    I have a problem with the printing of a billing document. I did set up the output determination of a billing document, but when I try and print, the Issue Output To window pops up with the Print Preview button and the print button. When I click on the print preview button, then it is ok but when click on the print button then the window close and nothing happens. When I click on the Print button it give me a message that output could not be issued. and it shows for only two document's.
    please help,
    Regards
    Subhash

    Did you check the Medium(Print) in the Output determination record and also check for what medium the form is assigned in the NACE transaction.
    Both the mediums should be the same.
    KC

  • How to maintain a condition record for a output type ?

    Hi All
    How to maintain a condition record for a output type ?

    Hi,
    Goto NACE and there is a button for maintiaining the Condition Reocrds.

  • Output type determination in Billing document

    Hi,
    I have a query reg automatic determination of output type in the billing document. The scenario is, For an invoice, two output types are determined automatically for all invoices. But the third output type is determined based on Shipping point. For Example say, output type IFIB should be determined if Sh.pt is A and IFIT if sh.pt is B. This is controlled thru "Requirement" assigned to the output types in output det procedure.
    The problem is, for a particular document IFIB appears though the sh.pt is B, Now i have to find out whether it is determined automatically or manually. I have checked the following
    1. The "manually changed" field is not flagged in the "further data" of this output type. I believe, if it is not ticked, then the output type is determined automatically and no manual change was carried out. Am I right?
    2. When i checked the "determination analysis", I find that the output type with the message "Output ignored (Requirement not fulfilled)". If the output was determined automatically, then "output xxx found" should appear right? When the analysis says it is ignored, then how come it can appear automatically?
    I am confused over this contradictory findings. Plz tell me whether my assumptions stated above are right. Kindly suggest me alternative ways to find out whether it is determined automatically or manually? If it is determined automatically, on what conditions?
    Thanks in advance
    Suresh

    Hi Suresh,
    In an output determination, it may tell  u that the output type is ignored because of un-fulfilled requirement, but it will still automatically appear in Header-> output, but u need to check the actuall processing status, whether is 0,1, or 2. I assume for your case it will be 0 (not processed, meant for manual processing instead), 1 (processed) and 2 (error occurred).
    Another thing which is essential is that, in order to let the system successfully fulfill your determination criteria, u need to assign output type with correct access sequence, for example 1 access sequence by sales org/billing type for output, another 1 is by sales org/shipping point. Or u can simply create 1 access sequence with 2 condition tables.
    After that u need to create condition record for each output type, u do this in t-code VV31.
    By rite, during transaction (issue output), system will be able to search for those condition record and output type will be automatically appear, providing if there is any rquirement routine in your output det. proc (appl = V3) returns TRUE.
    Cheers,
    Benny Andre

Maybe you are looking for