Maintain pacs in Material Master of 6,8,12 units of EA

Dear All,
We have an issue with the Pacs at the moment in the Material Master (MM41) in IS Retail. I have a material with Base Unit of measure as Each (EA). How is it possible to maintain a PAC of 6, 8,12, 20 in the same material master? When we try to create a second pack the system does not allow us to do so.
Any feedback would be much appreciated.
George H.

i think you can create other pack say PAC1 with the conversion at PAC1= 8EA like that and the conversion can be provided in the material amster.

Similar Messages

GRN Without Maintaining Price in Material Master

Hi Experts,
We have activated the Split Valuation in Material Master and also put restriction in PO that without price maintaining in material user can not raise the PO.
Is there any option that we can prepare the PO or GRN without maintaining price in material master and system should pickup the price from PO itself to update the MAP.
Regards,
Manish Jain

Hi,
Naturally system will update the MAP after GRN and if your PO has info update indicator on in material TABof itee detail system
the price will be suggested as your PO price next ime when you create Order.
Regards

Inspection type's maintained in the material master

Hello,
I want to know the transaction code using which I can check the inspection type's maintained in the material master.
I do not want to go per material put in mass. I know that I can pull the data from tables but i do not want that.
I want the standard SAP transaction code.
Regards,
Narendra Bora

Well, you could make the argument that using SQVI to create a query and making this report available to select users is not really development. It is a standard SAP transaction and users can be limited to only running certain queries. Groups of queries can be created and users assigned to groups. By adding variants that users can't modify and locking certain fields in the variant you can limit the queries to a maximum number of records. Usually the argument is that a user will create a massive query or set values that return too many values. Both of these concerns can be addressed.
I don't think a lot of people understand the full capabilities of SQVI. You don't have to give users unlimited access to the transaction!
If there was a "standard" report or transaction for what you want, I think between Sujit, and myself, we would be aware of it. It is a common requirement during go lives to have to review inspection type setups. I would hope by now we would have run across it.
FF

Is it possible to maintain the same material master

Is it possible to maintain the same material master with same code in all plants in a company. Our client is using same materials in all their four plants?

Material numbers are always maintained at Company code level. If you look at the Material master data, some data is maintained at Company code level, some at Plant level and some at Storage location level. If you have all the 4 plants attached to one company code, they should have the same material number. What you need to do is to extend the material to all the 4 plants if thats your requirement. Also, if you have your valuation area as your Plant, then you have the flexibility to maintain Plant specific pricing for the same material.
You can use MM01 T code to copy material from old plant to new plant. But check for the required details in your new plant and make changes accordingly

Sequence of maintaining views in material master

Hi
Is it possible to maintain sequence of maintaining different views in material master.
For example: Basic Data 1 should be maintained first & then Basic Data 2 and then General Plant Data/Storage 1 and then General Plant Data/Storage 2 and so on.
If the user misses the sequence, it should give a error message.
Regards
Pradipta Sahoo

Hi,
u r requirment is possible, that u change screen sequence of material master so the apperance will be as per u r requirement. In changes can be done in OMT3B in SPRO.
Rdg
Shekhar

Material Master MATMAS IDOC and base unit of measurement

Hi
We are using SAP standard material master IDOC type MATMAS05 to trigger IDOC. Our material master is having base unit of measure as "G". We are not using ISO unit of measurement. But Material master IDOC, segment E1MARM is populating base unit of meaurement (MEINS) as "GRM".
Any idea why IDOC is picking ISO unit of measurement instead of material master base unit of measurement.
Any idea how to send base unit of measurememt as "G" instead of "GRM" in DOC segment.
Thanks
Nilesh

There are ISO codes for country keys, currency keys, units of measure and shipping instructions. According to SAP design guidelines, you should use ISO codes for an IDoc if they are available. When you set up the IDoc, the SAP codes have to be replaced by ISO codes.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf

How can we maintain the selling price of PAC in Material Master?

Hi ALL,
We have a material that has Unit of Measures EA and PAC (based on the EA). So if i have a selling price for the UoM EA (quantity=1 EA) = 1.00 EUR the PAC (quantity=6 EA) due to conversion factors would be PAC = 6.00 EUR.
What happens though if we decide to sell the PAC less than 6.00EUR. So the EA = 1.00 EUR and the PAC = 5,65 EUR?
Based on the Concept of Conversion Factors that we use in IS Retail this is not accepted in the system.
Any feedback would be much appreciated.
George H.

You need to clean up the different objects and make it clear what is going on. Say, unit of measure is just a translation within the quantity space and should not bring about the type of product and how it is priced. When it comes to pricing you can use scale to establish quantity based discounts (say, if 1-5 is purchased the unit price is 1.0 dollar but if 6-60 is purchased the price is only0.9 as an example).Now if a PAC is six units physically packaged together then it probably would be more correct to define two separate materials in the system. This way, the price can be independently set for the PAC versus the unit EA. So, if the pack is a separate material that is priced independent and it takes conversion to bring it from PAC to EA then PAC is not a different unit of measure but rather a different product (you need to re-align your master data correctly).

Automatic batch determination without maintain the class in material master

Hi,
       Is it possible that we can do automatic batch determination with-out maintaining the class in material master.
       My requirement is i want to do batch splitting at PGI level & user dont want to maintain class in material master only they will maintain VCH1.
       if i will maintain class then batch splitting happening at PGI but if i will remove the batch from material master as well as strategy group then splitting not happening.
Regards
Puneet

Hi,
          if any one have solution then pls update
Regards
Puneet
Edited by: puneet rhythm sharma on Dec 7, 2011 6:14 AM

Not allow order unit in INFO record if it is not in material master

Hello there!
In standar SAP any user can introduce any order unit in the info record, even if it is not maintained in the material master alternative units of meassure. We need to block this...
The conversion factor is not a problem for us, as we can set it only for display in the customizing, so that the systems brings it automatically from material master
The idea is to allow as order units only those units of meassure that exist in material master.
We have been checking if it is possible, but no success...
Any idea on how to get it? Error messages, user exists, or so on...
Thanks!!
César

Hey vmendoza7785,
Congratulations on getting your new iPhone. I'm sure it is frustrating not being able to do everything you want with it. Let's see if we can get your backup started.
If you are having an issue with being unable to make a backup of your iPhone with iTunes, I would suggest that you troubleshoot using the steps in this article -
If you can't back up or restore your iPhone, iPad, or iPod using iTunes - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

Material master-additonal unit of measurement

HI, I have three questions
a) we have the follwoing data defined in material master (additonal data)
X UOM Y UOM EAN
1 LITRES 1 LITRES NIL
1 IGB (inner packg) 20 LITRES 345922222222
1 GBE (packg) 20 LITRES 345922222222
I need to know what is EAN no and in our case the EAN no is same for both inner packg and pack. . what does this mean. Sometimes we also see the EAN no is different. why... what it signifies ?
2) We have outbound idoc trigerred from delivery. message type is WHSOD. in one of the segments (E1EDL24), the system shows the delivery qty and material no. This segment also shows the EAN NO AS 345922222222. In segment E1EDL26, the filed UMVKZ shows as 1 which is ok (numerator as shown above) but the numerator field shows 1 only (it does not show 20 litres,, i think the field name is UB something ).
I need to know why the system is not showing 20 litres in numerator in the filed for segment E1EDL26.
3) Had we have two different EAN in material master as above, did our standard message type would have shown the conversion factors (numerator and denomi ) as per the EAN nos.....If yes, then in which segments ,the WHSORD shows the Conversion factors based on different EAN nos in material master-UOM tab (for instance if 1 GBE (packg) = 30 LITRES and EAN IS 345911111111.... I think there will be as many segments in idoc as there are entries in Additonal data-UOM tab )
rgds
pamela

Hi Jurgen,
I think you did not understand. My questions is as follows.
a) why we maintain alternative UOM in material mastr (additional data) ? an example ould be good.
b) We have in our system base unit of masuement as litres and sales unit as blank. that means system will take sales unit of measurementt as litres only.
now we make sales order and make delivery and a outbound whsord idoc is sent to third party warehouse. the third party warehouse undertsands only IGB(pack ) unit of measure wherase our idoc i think will carry LT (litres ) as UOM...
we do maintain the conversion factor between litres and IGB in our material master (additional data tab).That is our idoc shud carry conevrsion factor as maintained in ur material maste ( 20litres =1 igb ). so our idoc shud carry .05 as conversion factor
so that our third party warehouse understands that and dispatch 1 IGB of qty (2 litres as per our delivery )
rgds
Pamela
Edited by: Pamela79 on Aug 11, 2011 4:49 AM

Mass maintainenance of material master for the field MARC-NCOST,SOBSK

Hi
While maintaining two fields NCOST and SOBSK for hude materials using MM17 transaction, the transaction executed properly while saving the transaction. There is no warning and error messages for all materials. But it was not updated in material master or in tables. for other field relavent to MRP updated correctly.
when I am maintaining manually for each material it is taking the value update the same.
Please explain the problem why it was not updating and let me know the solution.
Regards
Kishore

Hi,
Thanks for ur response.
I am getting green light. Please note the application message given below.
"The material cannot be maintained since no maintainable data transferred
Message no. MG160
Diagnosis
You wanted to maintain an existing material master record as follows:
By changing it
However, you have not yet maintained the material master record for the organizational levels and data fields specified, or user departments selected. You can therefore process this data only in Create mode.
By extending it
However, you have already fully created the material master record for the organizational levels and data fields specified, or user departments selected. You can therefore process this data only in Change mode.
In both cases, this message can appear if there is no maintainable user department left. This occurs if you have not set the Check required fields indicator when transferring data (program RMDATIND). Although the absence of an entry in required fields does not then necessarily result in an error, the number of maintainable user departments is reduced accordingly.
Procedure
Depending on the cause, maintain the material master record in Create or Change mode, or also transfer the missing required fields."
where can I find IDoc list for this transaction.
Regards
Kishore

Copy of Batch characteristics value from material master to Batch

Hi Gurus,
I have maintained some values in the characteristics under batch classification in material master and want to copy the values in batch characteristics during batch creation at process order release.
Can any one help me to achieve this in standard way?
Thanks
Sandip

Hi,
Try to understand the batch classification functionality...In batch classification characteristic values changes from batch to batch...Values should not be maintained in the material master...it does not have any meaning...in the material master we need to assign only the batch class with class type 023 in classification view ...no need to assign the values there....Batch classification means characteristics values differs from batch to batch...
Thanks
Kumar

Order quantity equals to delivery unit in material master

Dear All,
I have below requirement regarding Delivery unit (MVKE-SCMNG).
My requirement is that whatever unit has been maintained in material master in Delivery unit, system shall not allow to create sales order of quantity which is more or less than the delivery unit.
Meaning, system shall only allow to create sales order of quantity equals to the quantity maintained in the material master in delivery unit.
Kindly let me know if any user exit(s) available for the same.
Waiting for your valuable reply.
Thanks,
Ritesh

Hi Ritesh,
This is very much possible using user exit, MV45AFZZ in FORM userexit_save_document.
Other option would be in MV45AFZB FORM USEREXIT_CHECK_VBAP, you can check that this qty in material master if unequal to ordered qty you can give a pop-up to user that 'The qty is being changed to xx' as soon as the user presses enter as the user would know about it.
in MV45AFZZ, the user would know only after saving and would be able to see in VA03 after the document is created.
Regards,
RS.

Valuation class in the material master

hi all, we maintain split valuation materials, namely domestic & imported. we are working on project based scenarion planning strategy 21 : MTO/project.
in daily practice user convert unrestricted stock to project stock with 412 Q mvt type before MRP RUN.
but for some when user try to convert stock following error occurs. I check stock available, it is available. but i do not understand why this error comes.
Maintain the valuation class in the material master first
Message no. M7232
Diagnosis
The system found that you have defined your own valuation classes for sales order stock and project stock in Customizing. However, these valuation classes have not been maintained in the material master record for the materials concerned.
Procedure
So that the relevant accounts can be posted upon goods movements, you have to maintain the valuation classes for sales order and project stock in the accounting view of the material master record for the material concerned.
If you have authorization to do so, you can change the material master record.

Hi,
The normal valuation stock refer to relevant table valuation class field MBEW/MBEWH-BKLAS
Special Sales Stock refert to MBEW/MBEWH-EKLAS
Projeck Stock refer to MBEW/MBEWH-QKLAS
Cheers,
Girang

Price updation in Material Master after confirmation

Dear Gurus,
When we create a production order for Semi finished which is maintained with Moving Average Price(MAP) in material master and we do confirmation of the order with "CO15'.
My client wants after goods receipts against 101 movement type the price should be up date in Material; Master immediately.
Regards
RAM

Hi,
I think this cant be done.
> My client wants after goods receipts against 101 movement type the price should be up date in Material; Master immediately.
How much MAP should be after GR? From where this value will come?
The accounting entries are passed on the basis of price maintained in the material master. The MAP is the input to the business activity. So as per my understanding the MAP cant be updated with GR against a production order.
Also, the costing run would update the standard price, and wont be helpful as the indicator would be 'V' in material master.
Hope it clears.
Regards,
Rohit.

Maintain pacs in Material Master of 6,8,12 units of EA

Similar Messages

Maybe you are looking for