Maintain Storage Location in IS Retail

Hello everyone,
I'm newbie in IS retail... i want to ask about storage location in DC or site... if we create DC and store, we can't transport it with tcode stms, but we must transport itu using wbte tcode... my question is i want to maintain storage location, i go to the menu : financial accc (new) --> material management --> maintain storage location, is that right? and then if i want to transport that sotrage location, i user the stms tcode or wbte and wbti tcode?
Hope your replies soon guys, really need your help...
Regards
Kenzo00

Hi Kenz,
First, you have to create Reference DC and Site to simplify the process. When you copy, the following data is copied from the reference site;
(1) General site data
(2) Calendar
(3) Valuation / Inventory Management
(4) Listing
(5) Requirement Planning
(6) Distribution
(7) POS Interface
(8) Layout
After creation, you have to carry out Site Export and Import using transaction code WBTE
Here, you can execute above transaction codes in background or in foreground.
Then system creates one file BTRA in path: /usr/sap/trans/tmp in the exported system.
Log on to the target system to Import the site using transaction code WBTI
Before importing you need to move the file from Export system to Import system under the same path.
Execute it in Test mode and see any errors, then remove the tick of test run and execute to Import the site.
Regards - Muralidhara

Similar Messages

  • How do I maintain storage location for Planned Orders in APO

    Dear all,
    Can you help us in maintaining storage location for planned orders in APO. The storage location from material master need to be updated in product master of APO and the same shall be automatically picked from product master during Supply Network Planning run.
    Material master CIF is live.
    We have got the following content error in CIF consistency check. How ever this is nt goging to harm any thing, but we would like to maintain in both R/3 and APO.
    Error:
    Plant and storage location in SAP APO: 2004
    Plant and storage location in SAP R/3: 2004 FGPA
    Thanks in advance
    Ram Mohan Rao Kolanupaka

    Instead of maintaining additional master data, i would rather use CCR user exits to switch off comparison of planned order at storage location level if the APO storage location is blank. This way you would not have to make changes to PPMs everytime a new scale out of the solution happens.
    In SE18 check the user exit /SAPAPO/CIF_DELTA3 (interface RELEVANT_FOR_COMPARE_ORDHEAD)
    If it is not possible to switch off this comparison then I guess changing master data is the next step. Do explore with a developer though about the first option.

  • Maintain Storage Location Description in Multiple Languages

    Dear Experts,
    I need to maintain Storage Location Description in both EN and DE (Denmark) Languages.
    Kindly suggest me whether this is possible?
    If yes, please let me know how can we do this.
    I have tried doing this but I could maintain in only one language (either EN of DE)
    Regards
    Shashidhar

    Hi Jurgen,
    That was really helpful.
    My issue is, when I login with DE Language, I want to see the German Description for both Storage Location and Plants
    When I login with EN, need the descriptions to be in English.
    Is this possible?
    Regards
    Shashidhar

  • Stock transfer between storage location in IS -Retail

    Hi,
    I want to have a Stock transfer order between two storage locations in the plant.
    I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab.
    Having that i get an error message "Not possible to determine shipping data for material XXX" Message no. 06280.
    I am trying to have the shipping data in customizing for set stock transfer  - "Define Shipping Data for Plants", but my site is not listed due to the use of IS Retail. Is there a way to configure it?
    Tnx
    Lior

    Hello Lior,
    in Retail your distribution center is a vendor and a customer, and your store is a customer. Therefore when you create master data for your distribution centre and store, you also create the vendor and customer masters that are required.
    By this link of the DC / Store to the customer master the shipping data is derived. I hope this answers your question.
    If you have further queries related to this, please do post them.
    Regards,
    Smitha

  • Stock transfer order between two storage locations in IS Retail

    Hi,
    I want to have a Stock transfer order between two storage locations in the plant.
    I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab.
    Having that i get an error message "Not possible to determine shipping data for material XXX" Message no. 06280.
    I am trying to have the shipping data in customizing for set stock transfer - "Define Shipping Data for Plants", but my site is not listed due to the use of IS Retail. Is there a way to configure it?
    Tnx
    Lior

    Hola.
    Voy a contestar tu pregunta en espanol. Debes crear al centro  emisor  como  deudor  en la transaccion WB02  y ampliar a la organizacion  de compra.
    Posterior, debes crear al centro  receptor como  acreedor en la transaccion  wb02.
    Cesar Moreno. Funcional MM Retail.

  • Maintained the storage location in MRPview2

    Hi,
    Though I have maintained storage location in MRP view2, while reversing the document from m.type 103 to 105 system is asking storage location in GR, then entered the storage location in GR, even though system is not allowing to post the GR because system is giving error message saying that inbound delivery storage location can not be changed to here.
    We don not want to maintain the storage location in PO and Inbound delivery
    We are creating inbound delivery in VL31N against the PO, after that posting the GR with m.type 103 once that is complete then will reverse the document from m.type 103 to 105 while reversing the document we are facing the above said problems.
    Appreciate for your effective action.

    Hi,
    You have two queries:
    1.You entered your required  storage location in material master ,MRP2 screen to have  Default storage location for external procurement, so that when you enter plant while creating the PO, this SL will be written automatically.This storage location nothing to with GR, during GR you need to enter your storage location.
    2.While reversing the document you are facing the problems.
    The movement types 103 is used for Goods receipt for purchase order into GR blocked stock & 105 is used for Release from GR blocked stock for purchase order.
    But as you are reversing the document use 104 movement type instead of 105.
    Regards,
    Biju K

  • Auto Creation of Storage Location at the time of Goods receipt

    Dear All
    Please tell me how can i create storage location automatically at the time of Goods receipt.
    i already made the configuration in OMJ8 for movement type and required plant
    still, at the time of creating PO its not getting created..
    Please advice
    Narendra C.

    Hello Narendra,
    If you are trying for automatic creation of strorage location for goods movement to special stock, then ithe data will nit be created. This standard SAP functionality.
    Also if you have maintained storage location in the preceeding documents, then it will automatically fetched during goods reciept.
    BR,
    Tushar
    Edited by: Tushar Patankar on Feb 4, 2011 12:50 PM

  • Storage Location is not popullating in the PO(for stock materials)

    Hi All,
    we are facing a issue regarding the Storage location in SRM 5.0.(patching SAPKIBKT14) when we try to create a PO with Stock material then the PO will be created but without Storage location.But during the confirmation it will give error saying "Enter Stor. Location ".
    if we enter the storage location manually it will work fine , but we need it should take automatically like other materials.Note:There is not problem if we do SC .. it will populate automatically.
    Please help us.
    Regards
    Channappa Sajjanar

    Hello Channappa,
    Please maintain storage location in field "Storage loc. for EP" in MRP2 view via transaction code MM02.  Once this is maintained the storage location here, it will automatically populate in the purchase order.
    Hope this helps.
    Thanks & Regards,
    Sunil Katyare

  • Storage Location Address Display.

    Dear All,
    Good Morning to all of u. Hope u all are doing well.
    I have issue that i have a plant in delhi location
    1010 Delhi Plant & under 1010 there are diffrent storage location
    as given
    Plant         Storage Location
    1010        FG01
    1010        TR01
    1010        SP01
    1010        TE01.
    These storage location has diffrent address accoring to their address in diffrent area. for example
    FG01 IN KAROL BAGH
    TR01 IN KASMIRI GATE.
    Now the issue is that i have to see the storage location address in system. so please help me.how i can display & modify in the system.
    Regards
    Dev
    Edited by: Parmar_Devender on Feb 10, 2011 7:26 AM

    Hello,
    You need to maintain storage location address first;
    Go to Transaction OX09 >>Enter your plant>>Now select the storage location and double click on Addresses of storage location in Dialog structure>> Now Press that Tab New Entries from application Tool Bar.
    Now Enter 1 and press the Envelope icon and you can maintain your storagge location address. Now this address will come in delivery address of your purchase order.
    Like wise you need to maintain storage location addresses for storage locations FG01, TR01,SP01,TE01 in plant 1010
    BR,
    Tushar
    Edited by: Tushar Patankar on Feb 10, 2011 5:47 PM

  • Storage location material status

    Hi,
    I wanted to ask if anyone knows if / how can we maintain storage location - material status.
    I mean to use the same functionality of plant material status which determines which of the logistic processes a specific material participate in.
    We need the same thing but at storage location level. The reason is, that at some times several storage locations are going through a (physical) change, e.g. redecoration.. and we need to "block" them for some processes like, stock transfer, purchase requisitions... and so on...
    Regards,
    Doron Oded.

    Hi,
    Well, thanks for your answer, but it is insufficient..
    We need to block the storage location for processes which are not necesseraly manual, like MRP, ATP, and in places where there is no check at storage location level - Logistic execution (deliveries, shipments), Purchasing... and so on..
    If for example, a storage location is damaged due a storm, or any other act of god (or man).. We need to block it to all logistic processes. The question is - what is the best way..?
    Thanks,
    Doron Oded.

  • Storage location question

    Hi, All,
    Do I need to maintain storage location for materials in material master data?
    Which view or which functionality must maintain storage location in the material master data? Is it mandatory?
    If I donu2019t maintain storage location, just plant. When I create purchase order, I donu2019t put storage location, but do goods receipt, I must input storage location, right? Can I put any storage location which belongs to that procurement plant, is it ok?
    Another question is about Is there any T-code or way to check which plant, which storage location maintaing in the specific material?
    Thanks in advance,

    Do I need to maintain storage location for materials in material master data?
    not neccessary but depends on the requirement of you rbussiness.
    Which view or which functionality must maintain storage location in the material master data? Is it mandatory?
    No it is not plant/storage loc 1 and 2 view
    If I donu2019t maintain storage location, just plant. When I create purchase order, I donu2019t put storage location, but do goods receipt, I must input storage location, right? Can I put any storage location which belongs to that procurement plant, is it ok?
    Yes you can put any belongs to the same plant but if in the config the create storage location automatiocally is configure than you can do that (transction OMB3)
    Another question is about Is there any T-code or way to check which plant, which storage location maintaing in the specific material?
    Yes, you can check MMSC OR in detail view
    go to transction SE16 or SE16N and enter the table MARD
    now enter you mateiral and you can view all the available plant and Sloc
    you can write query also using this table

  • How to block movement type 261 and 262 from several storage locations

    Dear Expert,
    Can we block the  261 and 262 movement type from several storage locations? These storage locations are not affected by the MRP run, where for the materials that have been moved to these storage locations their existance are not count. These storage locations could not be used for confirmation production order, therefore i want to block  261 and 262 movement type from these storage locations.
    Thanks
    Pauline

    Dear Pauline,
    if my understanding is correct abt ur query,
    1) you want in confirmation screen, Consumption should happen only from one storage location
    2) Rest all storage locations should not be allowed
    3) Maintain Storage location in BOM component view, in mass you can maintain in CEWB
    4) Now GO with SHD0, Make storage location field as Out put only, for CO11N Transaction
    Plz refer this link for SHD0 Demo
    [https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/transactionVariant-AStepbyStepGuidefor+Creation]
    Regards
    Madhu Kumar

  • Storage location on MRP-list

    Hi! I am trying to add Storage Location to the Purch.Requisition during a MRP-run. What prerequisites are necessary in order to achieve this? The business scenario is StockTransportOrders from Plant to Plant, where we want the storage location of the issuing plant to appear on the requisition (and hence be displayed on MD04): Any hints would be appreciated.

    Hi and thank you for your answer. I have tried to maintain storage location, and planned the st.loc. separately, but that is not enough - it seems. The SAP note 355493 desribes the essense of what I am seeking, but the note did not solve this issue regarding Purch.Req's
    brgs dag sigurd

  • Production Order - Component Overview - Storage location

    Hi,
    While i create Production orders, i do not see the storage locations for the components,listed in the component overview screen. I have maintained storage location & storage bins through MMSC transaction.
    Am i missing any config setting, so that the storage location will be visible in the Production Order.
    regards,
    K.Kumar.

    Hi
    You have to maintain the production storage location in the Material master (or) in BOM.
    In Material master MRP2 View, if you maintain the production storage location it is applicable where ever you use that material.
    In BOM-->Select the component >Go to item details> select the "Status/Lng text tab"--> here you can maintain the Production storage location. If you maintain here it is specific to this BOM only.
    Please check and revert.
    Regards
    Bala

  • Storage Location Control at customer level

    Dear All,
    Need a Customer wise Storage location control.
    Eg.
    Customer Name: ABCD
    Storage Location: FG01
    Customer Name: WXYZ
    Storage Location: FG02
    Regards,
    Saravanan E

    Hi,
    I am not sure but Explore STOCK DETERMINATION topic,
    IMG >> MM >> Inventory management & Physicl inventory >> Define strstegies for stock determination
    where define stock determination group and Rule
    Assign it header and Item level
    On item level maintain storage location and for FG01 - put priority 1 and FG02 - Put priority 2
    Assign stock determination rule to Application - Delivery.
    check whether it works with batch.
    I also update you if working fine.
    Kapil

Maybe you are looking for