Maintain the attributes for the master data-InfoSource

Hi All,
I got the error in the Schedule Process chain were one of my Delta Load-Master Data is not taking data from the source system.For rectifing the error is tried to check the Master data attribute (InfoPackage) in InfoSource. But I am getting the error message as "Attributes are not yet maintained" RSM006. Please provide the solution to the problem. As I want to run the scheduled Process Chain.
Regards,
Rajesh Giribuwa.

Hi,
Welcome to SDN!
In the error message do you see a question mark (or help/explanation button)? Clcick on it and see the system explanation and proposed remedy.
Best regards,
Eugene

Similar Messages

What are the steps for loading master data

Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
Evion

Hi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S

Turning off the text for a master data object

What happens if we turn off the texts for a master data object? (In RSA1, under info objects - double click on info object and go to Master data/texts tab and untick the 'with texts' box). Are there any risks in doing this? Has anyone performed this and run into any issues? Thanks

Hi,
There are no issues in turning off the texts, but if its an object that requires description in the report, say material, plant etc, then you won't have that available as the texts are disabled and not loaded.
Cheers,
Kedar

Error when scheduling the infopackage for loading Master data attributes

Hi,
Iam getting the following error message when scheduling this Master data Attributes ZIP_0PLANT_ATTR_FULL..( Flexible update of Master data info objects)..
In Data load monitor error i got this following error message.
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Thanks

HI,
A caller 01, 02 or equal to or greater than 20 contains an error meesage This is an Idoc error. Please check the Idocs :
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) Check in SM58 and BD87 for pending tRFCs and IDOCS.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - System log can also be helpful.
Thanks,....
Shambhu

Link To Download the documentation for Oracle Master Data Management

Hi,
I require to make a hierarchy for Processes in Master Data management.
Where do you suggest will I get the user guides for all the Softwares in MDM.?
Thanks,
Aeron

Looks like product related question - not a question about the download service which is the topic of this forum.
MDM suite has a range of products so you need to be more specific when looking.
You might want to post in a relevant forum category, if one exists for your specific product, such as:
https://forums.oracle.com/forums/category.jspa?categoryID=157
Please do not hijack someone's thread ({thread:id=2354806}) - instead start a new one
Likely place to look for download (which should include documentation) in this case is edelivery.oracle.com.
Some docs are also available from:
http://docs.oracle.com/cd/E18727_01/nav/scm.htm
Edit:
some additions to docs and other thread
Edited by: orafad on Mar 21, 2012 11:30 AM
Edited by: orafad on Mar 21, 2012 11:32 AM
Edited by: orafad on Mar 21, 2012 11:34 AM

What are the tables used for ACR & Master data daemon job?

Hi Experts,
What are the tables used in the backend for ACR & Master data daemon jobs. I would like to see the details of CHANGERUNMONI or ACR/Hierarchy Change run.
Kr,
Praveen

Hi Praveen,
Have you tried these tables BALHDR, BALDAT and BALOBJT for checking master date daemon delta status. It may not give you complete details. but definitely helps.. If you find any more details please do let me know..
Thanks,
Bharath

Maintaining attribut time dependent master data

Hi all,
I have a question regarding normal system behaviour while maintaining BW Attributs with dependent master data. For example, I have created an infoobject like this:
- cod 40029, class 10 valid from 01.01.2008 until 31.12.2008
- cod 40029, class 10 valid from 01.01.2009 until 31.12.9999
But afterwards when I try to maintain master data and change the 2nd row (valid until the end of 2010) the system changes the requested row but also creates an extra line with same data valid until 9999
- cod 40029, class 10 valid from 01.01.2008 until 31.12.2008
- cod 40029, class 10 valid from 01.01.2009 until 31.12.2010
- cod 40029, class 10 valid from 01.01.2011 until 31.12.9999 (extra line)
Is this the standard behaviour? the fact is that with this behaviour the user allways needs to "delete" the fields cod 40029 and classe 10 to make the row "unuseful".
Regards,
Pedro
Edited by: Pedro Godinho on Jun 25, 2009 1:15 PM

Hi Pedro,
Yes this is the standard behaviour.
I am not sure where you are using this and why you need to make it unuseful.
If you are using it in BPS or IP. Create one more attrbute to this master data object, this would flag the usefulness of the timeslice.
You would then be able to filtrer to only useful timeslices in your planning/reporting.
Dont forget to make the flag attribute as navigaitonal attribute.This will allow selection for the flag in the report or filters in IP or BPS.
Hope this helps,
Best regards,
Sunmit.

The attributes for user could not be determined --

Hi,
Our is extended classic scenario:srm5.0 & ECC6.0
we are getting the following error in the org plan:
"The attributes for user could not be determined "
The error is occuring , when we log into the web browser.
we also have a error in the org plan, under the user at the check tab,"No attribute found for scenario BBP".
when we run the BBP_ATTR_CHECK & BBP_BP_OM_Integrate, we have no errors...
Thanks in advance,
RK.

Hi All,
Thanks for your support...
I check the T-code:BBP_ATTR_CHECK & BBP_BP_OM_INTEGRATE.
I also checked the attributes for the CP are ok,still i had the error appearing in the WEB.
The solution:
The CP has been deleted from the org plan.
Once again,we generated the users from USERS_GEN and assign CP to the org plan again at the same.Now the Attributes error is gone.... and the issue is resolved.
Thanks and Regards,
RK.

Attributes for the sys event EC_DEVICE_ADD

Hi,
There are some changes in the Solaris 11 sysevent Attributes. How to know what are the attributes for the event EC_DEVICE_ADD. Earlier these were listed in dev.h now I do not find that header file on Solaris 11.
-Sachin

Hi Reetesh,
I have written following code into the ADD ROW button
System.out.println("Coming in Click Event");
OAApplicationModuleImpl am = (OAApplicationModuleImpl) pageContext.getApplicationModule(webBean);
OAWebBean innerTablebean = (OAWebBean)webBean.findChildRecursive("region12");
OATableBean innerTable = (OATableBean)webBean.findChildRecursive("innerTablebean");
OAInnerDataObjectEnumerator enum = new OAInnerDataObjectEnumerator(pageContext,innerTablebean);
while(enum.hasMoreElements())
RowSet innerRowSet = (RowSet) enum.nextElement();
Row []rowsInRange = innerRowSet.getAllRowsInRange();
OARow newRow = (OARow) innerRowSet.createRow();
OADBTransaction dbt = am.getOADBTransaction();
Number b = dbt.getSequenceValue("PK_XX_BATCH_PROGRAM_PARAMETERS");
newRow.setAttribute("ProgramId", b);
newRow.setAttribute("ProgramParmId",b);
newRow.setAttribute("ParameterName",new String(""));
newRow.setAttribute("ParameterDataType",new String(""));
newRow.setAttribute("ParameterInOutType",new String(""));
innerRowSet.insertRow(newRow);
Now the problem occurs only when there are more than one rows in parent table... As many rows are there in parent table that many times the rows are being added.
With Regards,
Sandip

Delta for cubes & master data

Bonjour,
I am a bit confused about some concepts of BW. Hope to get clarified here in good ole SDN.
1. Infocube is said to be ADD only. Yet, its data deletable eg. by request. How do I interpret this? Is it deletable only by requests? How about selectively as detail as single records? How about field level deletion (instead of a whole record)?
2. Is a 'new' image (rec mode "N") = 'after' image (rec mode " ")?
3. How is Repair Request compared to Pseudo Delta? Are they both only and must selectively delete by month / time char only? Can either be deleted by single records?
4. Master data is said to be usually overwritten. How is it so? What Delta type(s) are we talking about by this? How is Master data aggregated? Can it be? What does serialization and duplicate master data processing mean? How can master data prevent duplicates?
What's the usual and possible practices to manage delta for Master data attr,txt,hier?
Awaiting your reply.
best regards,
Pascal Gabin

1. Infocube is said to be add only because it is different from ODS or master data where you can 'merge or overwrite' data. When 2 records are loaded into an Infocube, if they are different in any one field, they will be stored as 2 seperate records (in the fact table of the cube). Whereas if 2 records are loaded into an ODS, and the records are similar in terms of the key of the ODS, only 1 record will be created in the ODS with the second records details overwriting the first if there is a clash.
From a cube you can delete data either selectively by specifying ranges or delete an entire request. You cannot do field level deletions.
2. No they are different. Let us say there is a record with 2 fields Customer and Amount being loaded into an ODS. First record loaded is (Pascal, 10.00). Then there will be a New-image record (Pascal, 10.00,N). After this a second record (Pascal, 15.00) is loaded. After this there will be 3 records.
Pascal, 10.00, New Image
Pascal, -10.00, Before Image
Pascal, 15.00, After Image.
All 3 add to 15.00.
3. Not able to understand your question. Deletion of all requests are I think the same. Selective deletion can be done only for a Infocube not for an ODS. See answer 1.
4. Master data usually changes very little. For eg, a customer 100013 is always 100013. Once in a while his phone number might change. When it does, it is picked up by the delta and the existing record in BW is overwritten. There is only one type of delta for master data. Not sure of what is the exact name. Master data is aggregated by specifying the key to the master data table.
The best practice is to maintain delta only for large master data objects (Customers, Materials etc). For all of these SAP has provided delta-enabled datasources which can be used. For the rest, full-uploads suffice.

No Source Fields(But wants to read attributes of another master data infoob

Hi
Im planning to use the 2LIS_03_BF datasource. I have two master data infoobjects(0PRODVERS_ATTR, 0MAT_PLANT_ATTR).
Im loading data from 2LIS_03_BF in DSO . But this datasource doesn't contains the source fields for master data infoobjects 0PRODVERS_ATTR, 0MAT_PLANT_ATTR.
So hw can i read the attributes of these master data infoobjects. please let me know
kumar

Hi
You can write a routine for this purpose we call it lookup in bw terms ie if the field isnt present in the source then you can take the values from the other targets may it be ods or master data and the selection is based on the keyfields in both the targets ie source field and the target from which the field has to be picked.
lets say i want customer Number from the MD Customer and i dont have customer number in the souce field so i will write a routine in the start routine to select customer number from customer master data put the field in the internal table and then write a update routine in the field customer number that reads the values into the work area from the internal table and then put the result in the result field from work area.
below is the syntax.
TYPES:BEGIN OF t_custnumber,
***declare the fields u will be using including the keyfileds in the souce**
customer number type /bic/0customer number
END OF t_custnumber.
........internal table to read data into......
DATA : i_custnumber.TYPE STANDARD TABLE OF t_custnumber.
work area to read data from internal table
DATA : wa_custnumber TYPE t_custnumber,
select
customer number
x
y
from table customer
into i_custnumber
where
x= x of data package ie below ods (source)
y = y of data package ie below ods (source)
The above routine comes in the start routine
Now for the update routine
read table i_custnumber into wa_custnumber with key
x= x of comm_strucute ie below ods (source)
y = y of comm_strucute ie below ods (source)
Result =wa_custnumber-customer number
in start routine the souce table is called as data package but in case of update routine the same souce table is termed as communication structure thus comm_strucuture.
hope this is handy information assign points if applicable
thanks
puneet

Change pointers for HR master data

Hi I am trying to setup change pointers for HR Master data , in relation to HRMD_A06 idoc , I did all the steps for setting up change pointers.
Transaction bd52 for my reduced IDOC shows 0 entries, When i did the same for customer master data , BD52 had some entries by itself .
I can't produce any HRMD_A06 Idocs , What am i doing wrong? Should the entries in BD52 be added manually for all the fields i need?
Any help is much appriciated.
Sudheer

Hi,
guess it's not necessary to see some entries in bd52 (it's enough to activate in bd53).
Do you have configured RBDMIDOC (otherwise no IDocs will get generated).
Or you run t-code bd21 for testing. Standard way is to run the report RBDMIDOC in a periodic background job.
A good description could be found here (p. 12):
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30139fb0-360c-2a10-1e9f-9d5417754983
Regards
Patrick
Edited by: Patrick Koehnen on Aug 12, 2008 3:40 PM

Error while activating the Master Data InfoSource for attributes

Hai
Im trying to load the attributes for master data characteristics .
I created the InfoSource and when im trying to activate it .
Then it gives the following error like below
Diagnosis
An error occurred in the program generation:
Program / Template:   RSTMPL80
Error code / Action: 6
Row:        505
Message:    The data object "P_S_COMM" has no component called
Procedure
If the problem occurred during the data load or transport, activate the transfer rule.
If the problem persists, search in the SAP note system under 'RSAR 245'
So please tell the what is the error and how to resolve this issue.
And pls give the error 'RSAR 245' message from SAP note system.
I will assign the points
bye
rizwan

hi Rizwan,
check if helps Note 602318 - RSAR 245 error analysis with RSTMPL80
Summary
Symptom
The process of generating transfer rules or loading data terminates with error RSAR 245.
The long text for error message RSAR 245 indicates the cause of the generation error.
1. Error code: 6
a) Message: The P_S_COMM data object has no component
This is very likely to be due to an 'obsolete' communication structure.
b) Message: <table name> is already declared.
c) Other messages
2. Error code: 7
Other terms
RSAR245, RSAR 245, activate transfer structure, monitor, request
Solution
1. Error code: 6
a) 'Obsolete' communication structure:
            Due to an optimization algorithm, pressing the 'Generating button' does not have any affect on the communication structure. Therefore, use the following workaround:
Select 'Communication structure' -> 'Change'.
Add any InfoObject (for example, '0MATERIAL') to the communication structure -> 'ENTER'.
Communication structure ---> 'Save'
Selet the InfoObject you inserted and delete it.
Communication structure ---> 'Save'
Communication structure -> 'Generate'.
a) Message: <table name> is already declared. Check whether the local part of your routines contains TABLE statements. TABLE statements always have global validity and should therefore be in the global part of the routine.
b) If the error occurs when data is being loaded, the transfer rule should be generated using RSA1.
In many cases, generating transfer rules using RSA1 results in a detailed error message.
2. Error code:
           Program to be generated is locked by parallel process.
This error can sporadically occur if parallel processes simultaneously try to generate the same program.
Unfortunately, you cannot completely prevent the error from occurring since these types of lock situations can still crop up during data loading in parallel processes. We are currently working on improving system stability relating to lock situations during the load task.
Reloading usually works without any problems.

T-code/Report for seeing the existing entire GL master data

Dear Experts,
Is there any t-code/Report for seeing the existing entire GL master data at chart of accounts level and company code level.
example :
GL a/c no    company_code   account_group   shrt_text    long_text     tax_category      open_item_management   etc
172500           1000                  Balance sheet   tds pay      tds payable    *                                 X
Thanks in Advance
Regards,
T.Kartheek
Moderator: Please, search before posting

Dear expert
    you can use f.10 or f.08
2. GL Account Balances (Totals & Balances )             S_ALR_87012301
3. GL Line Items                                                            S_ALR_87012282
4.Display of Changed Documents                                  S_ALR_87012293
5. Chart of Accounts                                                       S_AL:R_87012326
6.. GL Account List                                                      S_AL:R_87012328
7.. Display Changes to GL Accounts                             S_ALR_87012308
Regards
Ajeesh.s
Edited b

Maintain pricing conditions for the material for the excise invoice date

When I am doing MIGO (Release GR Blocked Stock-movement type) t)he system is giving an error "Maintain pricing conditions for the material for the excise invoice date"I am attaching screen shot for reference.
I request if any one can provide me the solution

Hi,
Check did you have entry of that movement type in the following path where you specify which movement type relating to goods receipts involve excise invoices
SPRO -
> Logistics general -> tax on Goods Movements-> India -> Business Transactions--> Specify Which Movement Types Involve Excise Invoices
Regards,
Biju K

Maintain the attributes for the master data-InfoSource

Similar Messages

Maybe you are looking for