Maintain the link between user status and system status

Hi friends,
my requirement is In crm transactions when we change the system status(inprocess) then the relevant user status            (inprocess) is also to be changed automatically. how can we do this? wt r the customisations we can do for this?
pls suggest me? thanks in advance.

Hi Madhu Sudan,
When you create User Status in Status Managment...
Eg: Inprocess
You assign User Status Triggers Business Transaction.
So, This maintain the link between the User and System statuses.
Reward Points if helpful.
Srini.

Similar Messages

  • What is the link between 2lis_03_bf,2lis_03_bx and 2lis_03_uM

    HI,
    what is the link between 2lis_03_bf,2lis_03_bx and 2lis_03_uM.is these datasources to be loaded in the order.can anybody explain me

    Hi
    These three datasources are related to inventory. BF is for opening stock, BX is for material movements and UM is valuations. Before loading this data into BW you need to maintain some settings in R/3 side.
    According to  SAP NOTE:315880.T-code BF11.Activate the flag NDI will reflect in table  "TBE11" For the entry "NDI".
    2. set the application indicator 'BW' to active using Transaction 'BF11' . which will make tick mark(x) for the field AKTIV for the APPLK ='BW' in table TBE11.
    3. Activate the PROCESSKEY under "Maintain Industry Sector"
    4. Generated "STOCK INITIALIZATION" for 2LIS_03_BX.
    5. Filled setup tables for "INVENTORY CONTROLLING"
    6. Scheduled the InfoPackage for 2LIS_03_BX with update mode "GENERATE INITIAL STATUS.
    then load BF and UM
    There is a PDF available how to load inventory..just search for it in SDN.
    REgards
    Ram

  • User status and System status for Trade Promotion

    Hi all!
    CRM 7.0 Web UI Trade Promotion Management.
    I have a trade promotion with custom status already assigned and visible from WEB UI, Is it possible assigning to such TP also a standard status picked amongst TP system status?
    Take into account that in the as is configuration we find in the same TP drop down list user status and system status.
    2 questions:
    1.     How can I hide the system status?
    2.     It is possible to group together user status and system status? E.g. User status: fundrequest, inplanning, submitted...+ released (system status).

    Hi Virginia Zitun,
    Can you tell me how did you manage to solve the issue.
    rgds,
    Venkat

  • How to remove the link between Profile name and corp net account after their disassociation

    Hi there,
      How do I  remove the link between Profile name and corp net account after their disassociation ?
    I would like to make remove the link between 'Viv Lingaiah' and
    [email protected] Also, I would like to keep 'Viv Lingaiah' and associate with my outlook id and corpnet account.

    Logon to your live account here
    https://account.live.com/summarypage.aspx then under aliases you can add an alias and promote it to primary.
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • EQUIPEMENT - User status and system status

    Hi freind,
    It would be great help if someone can brief me on  procedure / bapi or function module availability for USER STATUS and SYSTEM STATUS update to equipement.
    regards
    Pravin

    hi Pravin,
    Check this out
    <b>USER STATUS</b>
    http://help.sap.com/saphelp_erp2005/helpdata/en/56/254c40cc538437e10000000a155106/frameset.htm
    <b>SYSTEM STATUS</b>
    http://help.sap.com/saphelp_erp2005/helpdata/en/bd/7924da4d0d9043b426fc081669f27a/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/9f/972f72ec2a40479d2a7dec4500a4f2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/68/ebac18beabc34b90d4c1949a66dece/frameset.htm
    <b>USER STATUS</b>/<b>SYSTEM STATUS</b>
    http://help.sap.com/saphelp_erp2005/helpdata/en/89/a432ff461e11d182b50000e829fbfe/frameset.htm
    Regards,
    Santosh

  • Connection between USER STATUS and SYSTEM STATUS

    Hello,
    Is there a data base table that connects USER STATUS to SYSTEM STATUS by transaction types?
    Thank you very much.
    Ohad

    Hi Ohad,
    Check if the table JEST helps you.
    Pass the Object Number in OBJNR.
    Also tables TJ02 and TJ30 might be useful.
    Regards,
    Saumya

  • What is the link between schedule lines and delivery document item level

    Can any one please explain me what is the link between the schedule lines of the order/scheduling agreement and the item level of the delivery.
    Is there any link between VBEP and LIPS ?

    Hi
    Most of the item level data in delivery doc is copied from Schedlue lines in Sales order for eg delivery date
    So u may say that schedule line in sales order becomes the line item in Subsequent doc that is in Delivery doc .
    The table u are talking about i.e VBEP is related to sales doc and it contain data for Schedule line in sales order and the other table i.e LIPS give the delivry doc related data at item level.
    Hope this help

  • Tell me the link between Purchase Requisition and Sales Order Number

    tell me the link between Purchase Requisition(MEREQ_TOPLINE-BANFN_EXT) and Sales Order Number(COBL-KDAUF)

    Hi Puja,
    If you have created sales order  for matrial which has both procurement type,after MRP run you will get
    planned order.This planned order you can convert to purchase requisition for external procurement or
    subcontracting.
    You will find sales order number in details of purchase requisition ( ME52N) in Account assignment tab.
    Hope this help you.
    Regards,
    Raja

  • Table having the link between  Clearing document and the Invoice document

    pls can someone tell me the table that having the relationship between clearing document and the Invoice document.
    Thanx .

    Hi,
    You can try with the following tables: BSE_CLR, BSEG, BSAD, BSAK.
    Regards,
    Svetlin

  • The user status and system status

    hi, expert.
    1.  how to bind the user status and the system status.
    2.  if the status of the network is "CRTD", the status of  WBS can't be "TECO".
    how to customize.
    Please explain me all the steps to be required.
    Thanks in advance!

    Hello
    Define User status in OK02. Define various statuses and number them. Then double click on each status n you will be taken to transaction control screen. Here click on create tab and then set the influencing statuses for each system status. However this will be individual for WBS and Network.
    Define them seperately for WBS and Network
    Thanks

  • User Status and system status

    Hi PS Gurus,
    As per client requirement
    a)no finance posting
    b)no cost planning
    c) no budgeting
    only project ,wbs and network(no activity) should be created .
    These all transection should be carried out after releasing of particular WBS,Network (System status REL ).
    We have created user status profile in ok02 and assigned in project profile
    Data maintained in status profile
    St NO Status   StatusShort Text                   Lowest   Highest  Posit    Prior      Auth. cod    
    1    CRET  CREATED                                     1           2         1          1                 
    2    REL   STOP DATA UNLESS REL               2          2         1           1                 
    In status CRET  we have forbidden all business transection which client don't require.
    But when we are relasing the WBS (system status REL) ,user status is remain CRET .
    We want that after releasing WBS ,user staus should change to REL. which allows the all busness transections.
    Kindly help
    Regards
    Project Team 1

    Hi Experts,
    Actually, I have done as suggested over here like creating a NREL user status and it is working fine, but for my client, I had to ensure that the "Release" is allowed only after the  budget is released ( after CJ32). This is working till the time it gets the Sys. status "BUDG" and BUDG gets assigned immediately when we give the budget through CJ30. How to do this ?
    Also, I want this to get only assigned to the topmost WBS whereas as I had assigned this Status profile in the Proj. profile, it is getting assigned for all the WBS... how to overcome this problem ?
    thanks in advance,
    Vinodh.

  • User Status and System Status - CJ20n

    Hi,
    I would like to know if any problem but when i have the user status and the system status are filled those fields no longer appear in the TC CJ20N.
    What could be the problem??
    tks in advanced

    I know it's been a long time, but I think I can help...
    Didn't you activate que status exit?
    If yes, you problem is there, you have to pass the information from IMPORT to EXPORT in your exit, or deactivate it.
    Best regards,

  • What is the difference between User exit and BADI

    in user exit support to  4 types of exits(Menu exit,Screen exit,Field exit,Function module exit)in similar way  is badi  supported to all  type

    hi,
    BADIs (Business Add-Ins) are the new way in which SAP allows you to enter additional logic into an application, and is based on OO ABAP. (Methods in Interfaces) Transactions SE18/SE19.
    Customer Exits are the older method (which is still supported), whereby you create an include that is in a function module, which is called when the customer exit is activated. Transactions CMOD/SMOD.
    In terms of terminology, people often use the terms "Customer Exit" and "User Exit" interchangeably, however, strictly speaking, User Exits are places provided in subroutines (notably in the SD module) where you can insert your own code, but require a modification to an include (although it is provided for customers to change).
    They are two different methods to do the same thing: to check and update the data into std trx.
    The user-exit is the old concept based on function module
    The BADI is the new concept based on OO ABAP.
    So you can often to find a BADI and an USER-EXIT to do the same thing and you have to decide what you prefer to use.
    Anyway the new trx and the enjoy trx use BADIs as exit
    User-exits are SAP's oldest way of updating data in standard programs - see MV45AFZZ - Form Userexit_Save_Document_Prepare.
    Here you simply add ABAP code or add INCLUDES, etc
    Customer-exits were SAP's next generation. They are built on the concept of function modules - where you add your custom within the Z func modules.
    BADIs are SAP's newest and current way of updating data uisng Object-oriented concepts.
    Please check this link.
    http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
    Check the below links:
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/badi-vs-user-exit-405324
    http://www.sapfans.com/forums/viewtopic.php?t=172792
    User-Exit is a specific place in a transaction-process where SAP offers
    third parties to include there own business functionality. Actually
    User-Exit is the namespace used for Exits programmed by SAP specifically
    for SD. For the other modules it's called Customer-Exit.=20
    >Business Add-Ins (BADI) =20
    The use of object orientated code within SAP has lead to new method of
    enhancing standard SAP code called Business Add-Ins or BADI's for short.
    Although the implementation concept is based on classes, methods and
    inheritance you do not really have to understand this fully to implement
    a BADI.
    Difference between BADI's & User-Exit.
    1. Check the replies for your question which asked by another person.
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/569786
    2. Similar thread.
    http://www.sapfans.com/forums/viewtopic.php?p=559472&sid=99caa729618b18a8f7c46cc2f047af52
    3. Same question explained
    http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
    Badi Tutorials
    1. Sample program.
    http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
    2. Implementing BADI.
    http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
    Hope it helps.
    3. From help.sap.com
    http://help.sap.com/saphelp_nw04/helpdata/en/5f/071eed117c11d5b37d0050dadef62b/frameset.htm
    Pls : award points if it is useful

  • Problems with the link between PXI chassis and PC via MXI-4

    MAX display the chassis with a yellow exclamation point, and the MXI-4 conection monitor indicates taht the connection to the chassis has timed out.
    Under the windows device manager appears PCI std PCI-to-PCI bridge and MXI-4 connection monitor working properly.
    The system has bben working properly for one year and suddenly start to fail.
    I've tried to uninstall fromn device manager and reinstall again, and teh problem continues. When the PC starts detect new hardware and reinstall from CD with MXI-4 software for windows v 1.0
    Only the led PWR lights. The link indicator remains always off, from power up continuously. The cable connection has benn checked ok.
    The chassis is powered up in the proper sequence, first the PXI chassis, and the the PC.
    Operating system windows XP service pack 2; latest update KB835732 30/12/2004 (V 6.2)
    labwindows/cvi (fds) 7.0
    ivi compliance oackage 2.1.2
    max 3.1
    ni-daq 7.3
    visa 3.1
    chassis pxi-1000b with PXI-8331.

    Hello,
    it could it be an incompatibility with the desktop PC (maybe?). I know of cases in which the PCI board can be incompatible with a certain PC for various reasons (PCI bus not 100% compliant to PCI standards, PCI power rails, PCI bus-master capabilities, motherboard/chipset issues, etc..).
    I mean, has the PC been changed?
    Wich PC model/brand is it?
    Have you tested it on another of PC (another model)?
    In case you have already tested your mxi-4 in other PCs and the behavior is the same, I suggest you to contact your local NI office for assistance.
    Regards,
    Jorge M.

  • How to find the link between tables  CRMD_ORDERADM_H and  BBP_PDORG ?

    HI,All
        By TCODE  BBP_PD,  I cann't find the link by GUID between tables CRMD_ORDERADM_H (Header) and  BBP_PDORG (Purchase Organization) ,  why?  how to find this link?
       thanks
      Jesse.

    Hello Jianxin,
    It depends on document category type.
    For Shopping Cart, no link exist between CRMD_ORDERADM_H and BBP_PDORG tables as purchasing organization is defined at item level.
    For Purchase Order, using BBP_PDORG-SET_GUID, you get PO header GUID (GUID_HI) in table CRMD_LINK where CRMD-LINK-GUID_SET = BBP_PDORG-SET_GUID.
    Regards.
    Laurent.

Maybe you are looking for