Maintain vendor for excise invoice -STO process??
Hi,
Still facing problem in Same issue so...
I am doing Stock transfer from plant to plant in same company code.
i have maintain all the information in the Excise TAB of migo but still face the following errors.
Error is "Maintain Vendor for the excise invoice. (Message No 4F185) ...????"
In STO process, vendor it won't come in the picture ??Becas , once we create purchase order with UB document type , it 'll ask for only supplying plant not for vendor .
So what might be the problem and how to locate it , trouble shoot the same .???
Thanks in advance
SAP-MM
hi
check following
goto Xk02
give ur vendor ( plant assigned to)
then goto PURCHASING TAB
here in menu EXTRAS>ADD URCHASING DATA
here u can find field for plant
just check and revert back
regards
kunal
Similar Messages
-
In STO process, am getting error in GR"Maintain vendor for Excise invoice "
Hello
In STO process(MM route) I have prepared excise invoice by J1IS. While preparation of J1IS i have enterd customer(recieving plant as customer).I have also mainatin the the supplying plant as vendor in J1ID. But when i am trying to capture the excise invoice at recieving plant during GR am getting error "Maintain vendor for Excise invoice "
Kindly suggest
Regards
Manishdear sir
please check in customer master record , in control Data tab, vendor master assigned .
if not assigned the vendor master in customer master.
regards
jrp -
Maintain Vendor for excise Invoice in STO
Hi Friends
I am doing GR against Stock transport Order and getting error as Maintain vendor for excise Invoice
I created vendor master for plant then i maintained additional purchasing data in purchasing view there i did settings as follows
Purchasing View --> Extra --> Add purchasing data --> Selected data retention at plant level
Purchasing view --> Alternative Data --> Selected purchasing here i maintained supplying plant code
Same procedure i did for receiving plant also.
After that i maintained vendor master recored excise details in J1id
Still i am getting same error
Please give your valuable inputs
Regards
Vivek
Edited by: Supergene on Jul 24, 2008 1:01 PMHi,
Its not necessary to selected data retention at plant level.
Have you assigned Excise Indicator (For e.g. "1") to the Vendor Master, also maintain the ECC No, Excise Reg, Division, Commissionarate, LST, CST, etc....
Then it will work for new transactions. (For old, I think it will not work) -
Error : Maintain Vendor for Excise Invoice
Dear Friends,
I'm getting the below error while Good Receipt for STO(intra company through MM route).
Error: Maintain vendor for Excise Invoice
Message ID: 4F185
Process overview:
1. STO created in receiving plant
2. Material issue through MB1B from supplying plant.
3. Excise invoice created with ref. to Good issue doc. through J1IS in supplying plant.
4. While GR in receiving plant we are facing this issue.
Pleasse help me to resolve this issue.
Thanks,
VenkatHello
For STO , you have to maintain both the issuing plant and the supplying plant as both vendor and customer.And at the time of vendor creation, enter the customer number for that vendor in the vendor master record.And also maintain the vendor CIN details at the time of VMR creation and in J1ID.
Hope this helps
Regards
Gregory Mathews -
Maintain Vendor for the excise invoice Message no. 4F185
I am doing stock transfer PLANT to PLANT.
ME21N, VL10D, VF01 and J1IIN it was save properly.
After that I make MIGO. That time Error show "Maintain Vendor for the excise invoice Message no. 4F185"
MIGO time I am changing Indicator for material type FG to RM.
I am maintaining Vendor (Acct Control as Customer) & J1ID data also.
I am maintaining Customer (Acct Control as Vendor) & J1ID data also.
Please do needful
AlpeshHi Alpesh,
Please find the below links
Error : Maintain Vendor for Excise Invoice
Vendor error in STO ????
Hope this links helps you
Dasaradha -
Maintain Vendor for the excise invoice
Dear Guru's,
While creating goods receipt (In STO Process), I am facing the following error,
"Maintain Vendor for the excise invoice"
How to solve this one.
Regards,
CSHi CS,
Check whether you had maintained the vendor(supplying plant) in J1ID and also check whether excise indicator 1 is there.
And also check whether vendor (supplying plant ) is linked with customer in vendor master in Account control tab and also check whether vendor master (supplying plant) is linked to your customer master in control data ....
Hope this will serve you..
regards,
Patil -
Excise invoice capture process for dealer invoice
Hi,
As I read in many thread, that for the capture of excise invoice for dealed invoice in Po for item we have to maintain the base price as addition of both base value + excise duty amounts, then using MRP indicator we have to capture the duty amounts for dealer invoice but I have some query, when delaer make the invoice . they pass on the duty, even the duty amount is not intially known which excise invoice amount the delaer will pass, so while creating PO, How we can exactly enter he amount as BASE VALUE + DUTY amount, we have to chnage the the PO or without changing PO amount we can proces for capture of excise duty also in PO which tax code should be select , if we seelct the regular tax code which we use for excise invoice capture for other supplier then system will calculate the tax amount in the PO also, so which tax code should be calculate.
regards,
zafarAt the time of Po creation we will be knowing the duties which he will be passing you, but you will be not knowing the base price of material ,as vendor will add his amount also into the original base price and apss the invoice.
So will be creating the PO as original base price and excise only , but at the time of GRN he will add his profit into the base price and will give supply the material, so you need to change the base price while GRN to match the excise duties and tick the MRP indicator so that at time of miro the duties will flow correctly.
Hope this may help you.
BR,
Patil -
Hi
My requirement is to print vendor return excise invoice with t-code J1IV. I have nace configuration application type V1, output type JEXC, I have two processing rountines 1st processing routine contain program name 'J_1IEXCP_OUTPUT', form routine 'ENTRY', form 'J_1I_EXC_INVOICE' and the 2nd processing routine contain program name 'J_1IEIOT', form routine 'ENTRY', form 'J_1I_EXC_INVOICE'. The 1st processing routine program is written for SD Excise Invoice and the form is script. The 2nd one is useful for me I made a copy of program 'J_1IEIOT' and instead of using script I want to use custom smartform. I have a designed layout . I made a change in NACE configuration in 1st processing routine instead of standard program name 'J_1IEXCP_OUTPUT', I have assigned my custom program name 'YMMVendor_Return', done no changes in form routine 'Entry' kept as it is and deleted the form 'J_1I_EXC_INVOICE' and in PDF/Smartform form I assigned custom smartform 'YMMVendor_Return' designed by me. I am looking for form entry subroutine in this standard 'J_1IEIOT' to put a break-point and check is it calling that program from J1IV but there is no form entry subroutine in 'J_1IEIOT'.
Can anyone please suggest how to resolve it...
Best Regards
IndraExcise is captured at diffrent stage and vat at diffrent stage
U need to creat Returnes PO (note returns PO should have tax code of bed ecc and hecc and vat
do GR MIGO
J1IS hear only Excise partwill be returned and ther is no chance to reverce ur vat or cst
then u need to pass credit memo MIRO agaist returns PO at this stage ur vat amount will be revirsed.
Very imp , In PO ur excise value should be same as u are going to reverse in J1IS.
as there is no relation between J1IS and MIRO (in returns PO excise value in J1IS dont flow in MIRO credit note)
As in purchase there is link between GR excise amount and MIRO. hear excise value captured in J1IEX flowes in MIRO
so be care full while creating PO.
hope this helps -
Excise invoice capture process
Hi,
I want to know about excise invoice capture process for depot plant which t. cod eis use for depot plant how to do the part1 and part2 and also reversal process for the same.
also what is diff. between excis einvoice capture process for depot and non depot plant.
regards,
zafarHi Zafar,
There are no part 1 and part 2 in RG23D for depot scenario. You can update RG23D at the time of MIGO or J1IG "Capture excise invoice for depot".
For cancelling you can use the same transaction. And to send the goods out from Depot plant use T-code J1IJ for updating RG23D.
Rest process remains the same Extraction J2I5 and print through J2I6.
BR -
Accounting documents are not posted for Excise invoice
Hi,
1. The Excise invoice has been created with reference to F2 invoice but the accounting documents is not posted for excise invoice, what is the settings needs tobe maintained to post the accounting entries to excise invoice..?
2. where we will maintain number ranges for excise invoice..?
Thanks
Rao..hi
1. The Excise invoice has been created with reference to F2 invoice but the accounting documents is not posted for excise invoice, what is the settings needs tobe maintained to post the accounting entries to excise invoice..?
Not sure but can u try to relese this to accounting
2. where we will maintain number ranges for excise invoice..?
Excise invoice number range is depend on Excise series group.
T-Code : SNRO
Following is the No. Range Objects related to Excise, select the proper no. range object as per your requirement.
J_1I57FC - 57FC Number Range
J_1IARE1 - ARE1 Doc No object based on Series Group
J_1IARE3 - ARE3 Doc No object based on Series Group
J_1IBOND - Excise Bonding: Bond number object
J_1ICERT - Withholding Tax Certificates (India)
J_1ICHLNNO - Internal number range for challans
J_1ICONPLA - Consolidated PLA serial no. generation
J_1IDEPINV - Excise Invoice Number for Depot Invoices
J_1IEXCEXP - Export excise invoice number range
J_1IEXCINV - Excise invoice number
J_1IEXCLOC - Local excise invoice numebr range
J_1IEXCTST - Excise invoice with intervals
J_1IEXINEX - Excise invoice number for export
J_1IINTNUM - Internally document number to be generated
J_1IINTPR2 - Despatch serial number
J_1ILIC - Excise Bonding: License number object
J_1IPLA2 - PLA part II number range object
J_1IRG1 - RG1 Number range object
J_1IRG1_T - No. Range for RG1 - Excise group / Material
J_1IRG23A1 - RG23A part 1 no. range object
J_1IRG23A2 - RG23A part II number range object
J_1IRG23C1 - RG23C part I number range object
J_1IRG23C2 - RG23C part II number range object
J_1IRG23D - Folio Numbers for RG 23D
Check the link
Re: Excise Invoice Number Range
excise invoice and domestic invoice sharing same number range -
Accounting document not generating for excise invoice.
Dear all ,
my issue is
accounting document not generating for excise invoice
we are creating accounting document in J1iin
with refferance to billing document but the accounting docuemnt is not generating
the accounting document for billing document is generated
so why the accounting document for excise invoice is not genrating its showing the correct amount in BED ,cee and HE Secc.
please help
regards
SubratIMG -> In Logistics u2013 General -> Tax on Goods Movement -> India -> Account Determination -> Specify Excise Accounts per Excise Transaction
Check if the following is maintained or not
DLFC CR Credit PLAAED PLA AED account
DLFC CR Credit PLAAT1 PLA AT1 Account
DLFC CR Credit PLABED PLA BED account
DLFC CR Credit PLACESS PLA cess account
DLFC CR Credit PLAECS PLA ECS Account
DLFC CR Credit PLASED PLA SED account
DLFC CR Credit RG23AED RG 23 AED account
DLFC CR Credit RG23AT1 RG 23 AT1 Account
DLFC CR Credit RG23BED RG 23 BED account
DLFC CR Credit RG23ECS RG 23 ECS Account
DLFC CR Credit RG23SED RG 23 SED account
DLFC DR Debit MSUSP CENVAT suspense account
Also IMG -> In Logistics u2013 General -> Tax on Goods Movement -> India -> Account Determination -> Specify G/L Accounts per Excise Transaction
Check if for all Excise group u2013 DLFC u2013 Company Code combination GLs are maintained or not (especially in production client) -
Accounting document not generating for excise invoice-please help
Dear all ,
my issue is
accounting document not generating for excise invoice
we are creating accounting document in J1iin
with refferance to billing document but the accounting docuemnt is not generating
the accounting document for billing document is generated
so why the accounting document for excise invoice is not genrating its showing the correct amount in BED ,cee and HE Secc.
please helpDear G. Lakshmipathi,
As uknow i am getting problem when i am creating the debit memo
so is there any specific ETT for debit memo is there .because we are not maintaining delivery type to billing type here in CIN setting
so its not goods removal through sales . so what will be transaction type for this.
how to check the error that why the accounting document is not generated as no error log is also comming.
so please help me in this regards.
Thanks with Regards
Subrat -
MIGO-Capturing problem-Item is not available for Excise invoice,deselect th
Hi Gurus
while doing MIGO and part 1 posting am getting following error
MIGO-Capturing problem-Item is not available for Excise invoice,deselect the item
kindly help in this
Maruthihi
check all settings in J1ID
or
in po did u got ur all values correctly for excise cess and hcess
if yes then check ur vendor excise details in j1id
if above setting are done properly then check ur CIN setting in spro>log gen>tax on goods movement >india>account determination >specify excise acct as per transaction/specify G/L acct as per transaction
regards
kunal -
Error while detrmining Internal Document Number for Excise Invoice.
Hello mate, I am trying to create excise invoice for for factory sale. while saving the document I am getting an error" Error
while detrmining Internal Document Number for Excise Invoice. Message: Maintain Number Range for J_1IINTNUM". I have already maintained number range for mentioned object "J_1INTNUM" in TCODE SNUM , still getting error. Please solve my querry . Is it related to transport or number range activation or something else? I have maintained number range with serial no. "01"Hello ,
Ensure that number ranges are properly maintained in the respective client that should be the year specific.Some times even u maintained the system should not consider that number ranges due to table updation problem ,because i had faced the same in the earlier and received the reply from the sap stating that this error was occured rarely after the years,so please ignore that ,for your problem u first come out of the screen and then re log in and then create the excise invoice ,then check the number ranges .
Please revert for any
Kalyan -
Vendor return Excise Invoice through J1IS in foreign currency
Hello Experts.
Scenario is like:
We have two group company which are 100% EOU . and we have inter company process.
Plant A used to invoice to Plant B in Foreign current e.g. in EUR.
In case of any rejection, Plant B need to raise return Excise invoice through J1IS.. but the problem is that , In J1IS we can raise invoice in INR only. But the requirement is like Plant B also need to raise Excise invoice in same currency i.e EUR.
Is there any method or process through which we can raise return excise invoice in Foreign currency.
AshwaniHi Amit:
As we have two EOU unit . one EOU unit use to sale material to another unit as export sale. and do billing in EUR.
Suppose i have to return few material back to first EOU unit, than vendor return Excise invoice should be in EUR as it was billed to me in EUR.
Ashwani
Maybe you are looking for
-
Not able to view catalogs in CCM after clicking on "edit catalog"
Hi all, I am not able to view a single catalog (supplier, procurement or master) in CCM after clicking on edit catalog. After clicking on "start" pushbutton, it is giving warning message "Error while editing Master catalog" Could anybody tell me, wha
-
JCO communication error/ failure
In all scenarios, XML file has been picked up from the destination but not found in the target directory. ( In Adapter Framework the inbound and outbound messages are in green color.) In qRFC monitor (TC smq2) the status is SYSFAIL. When double click
-
What to fill in "temp table scope" for global temporary tables?
Hi, I'm using Data Modeler 4.0.1.836 and whatever I put in the "temp table scope" box for a global temporary table doesn't seem to affect the DDL script regarding the ON COMMIT PRESERVE/DELETE ROWS option. The script always shows ON COMMIT PRESERVE R
-
Port replicator for Equium A60
i want to use a port replicator for a A60 equium laptop can anyone advise what to use as i cannot see one listed for this laptop
-
Does PSE10 have an external API so that I can make my own addins to the organizer?
I need to extend the functionality of PSE10. My most immediate need is to "merge" .NEF images and .JPG mages into a version set. This is a very tedious manual process in the current version.