Maintaing Condition record for Tax UTXJ

***Hi***
***The problem is  that while maintaining  condition record for UTXJ the system gives a message that tax code is not in procedure   TAXINJ.Although the condition record was maintained for that condition type few month before for a different plant.***
***The condition table for the condition type are of combination of  country/region/delivering plant region/customer tax classification/material tax classification.***
***And UTXJ is for CST for the plant .***
***So please tell what else i need to maintain also.***

Hi,
You are maintaining condition record for UTXJ and in that mentioning tax code.
However the tax code you mentioning that is not created in tax procedure TAXINJ and this pocdure is assigned to country IN
Go to FTXP an create taxcode with combination
Country Key     -      IN
Tax Code         -     A0
Procedure        -     TAXINJ
Tax Jurisdiction   -   IN01
kapil

Similar Messages

  • Condition Records For Tax Condition types for SAP 4.7

    Dear Experts,
    What is the procedure to maintain condition records for tax condition types like CST , VAT and Service Tax. We are not using CIN. In MM01 and XD02 tax classifications i have maintained UTXJ condition Type and also maintained the above mention tax condition types.. But when i create condition records for UTXJ in VK11 the sysytem is asking for Tax code. In FTXP when i defined Tax code A1 for Tax ProcedureTAXIN1 where i maintained all the Tax condition types there.But i am unable to save the Tax % in FTXP.When i try to save the tax code it is not saving.
    Is there any other procedure to maintain Tax condition types for SAP4.7.
    My Pricing procedure that i maintained in V/08 is Z00001.
    Regards
    Jyoti

    Hi Jyoti
    Since you are not using CIN, you can do the follwing for tax conditions
    Check the assignment of the TAx procedure to country
    once u do this , you will be able to maintin the vendor and customer records for MWST  type for taxes
    then create condition records for MWSt with access sequence MWST in condiution type or design one suited to your needs
    alternatevely in the current procedure you can change access sequence for condition type UTXJ form the current one to MWST and then maintain condition records
    hope this helps
    thanks
    Akasha

  • Condition record for tax calculation

    hi .
    how to populate value for condition type MWAS (outputax)
    where to create?

    hi,
    Tax is determined based on,
    1) Departure Country , departure Zone is taken from delivering plant
    2) Destination Country of the customer receiving the goods( i.e Ship to party)
    3) Tax indicators in CMR >Sale area data>billing tab page& MMR>Sales:sale org data1 view.
    Maintain all the above in the condition records for determining the tax condition rate in pricing procedure.
    Reward if it is useful.
    MCM

  • Condition record for Tax Code

    Hi,
    How to find out condition record number created by a Tax code.

    Hi Mallikarujana,
    Goto T.code FTZP then enter country ket and tax code.
    then click F6 (environment > claculation procedure) there you get option to select condition record.
    Hope this helps.
    Please assign points as way to say thanks

  • T code for maintaing condition record in MM pricing

    Hiii ..MM GURUS...
    Can anyone let me know the transaction code for maintaing condition records for condition types in MM pricing .
    Regards
    SARFRAZ..

    MEK1 with appropritate key combination

  • How to maintain 2 condition record for the same message type

    Hi,
    My requirement is that I have got a PO output type NEU.Now when i release the PO 2 mesages  should get outputed.
    1) A print should go to the Printer ie:Option1 Print output
    2) A PDF should go to the vendor ie:Option 5 External send
    I have completed the config part but I am having a problem while maintaing the condition record for simultaneous output of message 1 & 5.
    In MN04 i tried to maintain 1 & 5 but it doesn't allow me to do so?Why
    How do I output  2 messages while releasing the PO
    KN

    Please check this answered link:
    Re: Two PO Outputs.
    Re: Emailing PO to Vendor, copy to buyer as well
    Edited by: Afshad Irani on Jun 16, 2010 12:05 PM

  • Condition types for Tax

    Hi,
       I have included a Condition Type CTX1 for tax in Canada. It does not show up in my order, even though it has not been marked manual or statistical. 
      Can you tell me what i need to do so that i get to see the actual value being taxed from my base price?
    Thanks and Regards,
       Aditya

    the informatin wqht you provided is inadequate anyways taking granted that you have maintained condition records for that cond type as you are sayin it is a tax condition type you need to maintain the appropriate indicators to get that condtype in your order like ,.  tax indicator for customer master record and material mster record and not only that u should do tax determinatin and then in your condtion records maintain tax with appropriat tax codes hope thos tax codes are given by FI pepole.
       and as the above guy mentioned u can eaily do analysis in sales order by go to item level conditions .......bottom analsis and check for ur cond type on left hand side and then read the message on right hand side.
    revert back nay further,.

  • Create a new condition type for tax... and assign in the Tax determniation

    Hi,
    I need to add custom condition tax type, i tried creating the condition in OBQ1 and add that condtion in FI pricing OBQ3, now I want to confirm what is basic conept means whenever we create on condtion in OQB1 and add in OBQ3.
    i need to add that in Sales order and need to maunally populate that in the sales order.
    could anybody suggest to create a new condition type for tax.(full process).
    Thanks
    shankar

    Hi,
    Goto the T.Code "V/06".Create one new "Z" condition type.
    Maintain the Condition Class as "D(Taxes)".
    Calculation type as "A(percentage)".
    Cond. Category as "D(Tax)".
    Select the tick mark for "Group Condition" if it is applicable for you.
    In the next step assign this condition type to your pricing procedure by using the T.Code "V/08".
    Also maintain access sequence by using the T.Code "V/07" and assign it to your Condition type.
    Now this condition type will appeared in your sales order after maintain teh condition records.
    Regards,
    Krishna.

  • Condition records and tax code combination table

    CAn I know the table where both condition record and tax code stored.

    Hi Jose,
    I think you have quoted the tax procedure table.  There i have not found the tax codes. 
    My requirement is both condition records and tax codes combination table.
    I want to see for which condition type which tax code has been assigned.

  • Condition records for JMIP

    Hi
    Can any one tell how to maintain condition records for JMIP(BED),JAIP(AED),JSIP(sed)?. Rewards guaranteed
    regards
    B shar

    Hi
    I ve maintained through fv11 for JMIP. Now the percentage is showing in PO item detail  -  invoice tab - taxes. But during MIGO still warning message comes BED for excise item is zero. Then i used t code J1IEX for capturing excise . here in the item level - Duty rates tab % is showing for BED (same % maintained through fv11). But in duty value tab no value is coming. If we check the document then two messages comes an error message - excise details are not maintained for vendor, and the same warning message - BED for excise item is zero. What more settings to be done? Pls look into the issue
    regards
    B shar

  • Condition record for JMOQ condition

    Hi ,
    I have maintain a condition record for Condition type JMOQ (BED SET off , Amount) at tax code level .......but in Purchase Order , if I attach same tax code , system is showing

    Hi ,
    I have maintain a condition record for Condition type JMOQ (BED SET off , Amount) at tax code level .......but in Purchase Order , if I attach same tax code , system is showing me error (RED color icon) agst this condition with reason "Inactive via formulae of incorrect" ...
    Could u pls help me to correct it.
    Regards
    Shrey

  • Own condition tables for tax determination purposes

    Hi,
    While using TAXINN pricing procedure. For simplified tax rate determination, we want to create our own condition tables for tax determination purposes, as is otherwise possible with the conditions technique.
    The existing conditions which are pre-delivered with access sequence/s are as:-
    TABLE     Description
    3     Tax Classification
    363     Plant/Vendor/Material
    358     Country/Plant/Ctrl code/Material
    357     Country/Plant/Ctrl code
    362     Country/NBM-NCM Code
    359     Plant/Matl group
    However we want to create a custom table (9xx:Vendor/Material) with which can meet our requirement of tax determination while purchasing materials.
    Could you please elaborate weather our requirement can be fulfilled by standard customization?
    Thanking you.
    PP

    hi sam,
    Thanks for reply. I watched many posts related to this issue and your reply is generic one.
    I understand that all kind of requirement can be meet with existing data.
    I am writing here because I want to reduce the number of records to be maintained. (say, Plant/Vendor/Material, if I have 10 Plants then no of records will be 10 different Plants x vendor x Mat. codes. Hence I am keen to have as Vendor/Mat. code. SAP delivered Plant/Matl group somehow not fulfilling our business need).
    I am interested to know weather it is possible to create a custom condition table to meet our requirement/s?
    What is your opinion on this..? Please share if you know any SAP Note as am unable to find any relevant one.
    Thanks,
    PP

  • Condition records for free Goods

    hi experts
    what are the T codes/path for maintaining condition records for
    freegoods
    product sub
    thanks in advance
    vinay

    Hi,
    CRM Standalone condition records maintain from the  Transaction code
    /SAPCND/GCM - Condition Maintenance, after entering this code give the Application CRM than select your Free goods condition type and maintain the values.
    Configure condition technique correctly for the free godds conditin type
    ( eg : Source : CRM ).
    Regards
    Naren..

  • The condition record for use B can not be displayed

    Hi gururs,
    What does this message (number : VE896 ) mean ?
    How to make it desapear ?
    P.S : it's about output type for purchase orders.
    This message is displayed when I click on : "Goto -> Determi analysis" in tcode ME22N.
    Regards,
    Bahia.

    Hi
    It means you are trying to veiw the executed condition record. System found the condition record for entered transactional data which you cannot see by clicking on it (when you see green record in condition analysis).
    For given condition type -> and access sequence/ access - system shows the condition record that is determined. You can see its details by clicking the access which shows the message that condition record has been found with its determined parameters.
    Ex: For batch determination I have set up one search strategy with a condition type (with access sequence). I created one condition record. When creating say sales order -batch determination takes place based on condition record parameters. System shows a green light for determined condition record. You cannot see its details - if you try to see then system issues a message like ''The condition record for use B can not be displayed''. If you want to see click on its immediate predecessor (access ).
    Thanks

  • Update condition records for delivery

    Hi
    Can anyone tell me is there is any function module or IDOC which updates condition records for Item level and header level for a delivery??
    I checked the standard BAPI's but they dont do..
    also can we use bdc ??
    Thanks
    Thilothama
    Message was edited by: Thilothama v

    Sorry, can't help there as I don't have access to that environment.
    Srinivas

Maybe you are looking for