Maintaining a Ztable in different box

Hi All,
I created a Ztable and made some entries in development box. table maintanance
was used to make sure the users can make entries using SM30. worked fine in development box. This was transported to Quality box. of course the ztable was there without the entries. Now when we use SM30 and type in the table name and when we click on display/maintain - an error message is displayed saying "create a data processing function module" -- how can this be resolved ?
Thanks,
Mark

Hi,
I at all you want to maintain it in quality server without transporting the contents from development server use se54 for generating a table maintenance dialogue.
In order to have consistency & better control, it's always better to transport changes/additions/deletions to the table in quality via a request. While generating objects via se54 just tick the radio button 'Standard recording routine' this will forcibly create a request for all changes/additions/deletions done to this table, then just transport this request to quality.
I hope this helps,
Regards
Raju Chitale

Similar Messages

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

http://support.apple.com/kb/TS2005
http://support.apple.com/kb/HT1861
https://ssl.apple.com/support/proapps/serialnumbers/

HT1476 My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones. I'm stumped :/

My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones and a USB cord that works from the laptop won't work from 3 or 4 different wall boxes that work for others. I'm stumped :/

Update: It seems as though the phone will charge if I plug it in and then turn it off. It will not charge while the phone is on. Also iTunes will not recognize it, so I can't sync or anything. I read somewhere that it could be a fuse somewhere?? Or maybe the dock connector. Where is the best place to get this repaired?

HR Compare employees on 2 different boxes

Greetings.
I have a requirement where I have to compare all employees on 1 box against the employees on a different box based on company code.
HR has it's own box.
The other modules FI, MM, SD etc...sit on another box.
There's an interface that sends IDOCs from HR box to other box with employee updates on a daily basis to ensure both boxes are in sync.
They want to be sure that in fact they are in sync by running this report.
The info types I need to compare are 0000, 0001, 0002, 0006, 0009, 0017, 0105.
They want to compare ALL the fields in each infotype.
My approach is the following:
1. Select all employees for a company code from other box and store in a table
2. Store the infotypes I need in another table
3. Create an RFC on the HR box that I will call 1 time
        Send all the employees, infotypes, and company code
4. The RFC will send the Current Employees from the HR box to the Other box
5. I'll loop through each employee and compare ALL the fields per infotype
6. Any discrepancies, I'll list on the report
The most employees we have is about 7000.
Do you see any issues with this approach, such as performance or anything else?
Can I just do a straight:
       IF PA0001_otherbox = PA0001_from_hrbox
       or do I have to compare field by field?
with best regards....

This is what I'm going to do.
1. Create an RFC destination from Other Box to HR box
2. Create an RFC Function on the HR box
Create Program on Other box that will do the following:
- Extract all employee's specified info types by company code
- Call the RFC Function on HR box to retrieve the info types by passing Company code, optional PERNR, and tables to store the info types
- loop through Other box info types and compare to HR info types
- any discrepancies would be saved in a table
- first I would compare just the record
         i.e. IF OTHER_INFO_TYPE_0000 <> HR_INFO_TYPE_000
              Then compare all the fields within the info type to find the discrepancy    and save it
- report out table with the differences
- done

If SCCM 2012 in different box and Sql in different box

what permission sccm installation account will require in SQL box at the time of installtion of SCCM if both are in different box

As a side note, this is the same no matter where the SQL instance is located.
Jason | http://blog.configmgrftw.com | @jasonsandys

Transfer Config between Different Boxes

Hi,
We need to transfer complete configuration from one SAP Client (Development client) to another and both the clients are in different boxes (Server) in order to bring configuration in both the boxes in sync.
Kindly suggest the best practice and the process to be followed.
Regards,
Ghanapriya

We can transfer config between systems by migrating table data. We need to identify all tables to be migrated to other systems and upload them in destination system. Basis team will be the best contact to migrate standard tables data.
Thanks.

Restatement Functionality when reporting is in different box then consol

Hello All,
We want to achieve restatement functionality but our reporting is in different box meaning consolidation is in one box & reporting is in BI box where virtual multiprovider will not exist.
Question is what are the possible ways to achieve this, please let me know if you think of any?
Thanks & Regards,
SMP

But in both Boxes, you are using SEM-BCS transactional infocubes, right ?
If yes (which is for me mandatory), you need to generate the virtual cube in the reporting box at least to perform the consolidation reporting. Actually, the issue is not the mutliple hierarchy option, but the consolidation logic in general. You will not be able to retrieve consistent data if you base your reporting on a basic cube or a transactional cube. The full concept of BCS is highly based on the virtual cube and its function modules. Basic examples : you can have the date of acquisition / date of divestiture in a cons group, the accounting techniques or the reporting mode correctly applied in the reporting ONLY IF you use the BCS virtual cube.

Installing file server for BO in different box.

Hi all,
i want to install file server in different box and web server + app server in different box.
is it possible ?
how can i do that ?
do i have to make any changes while installation or after installation i have to go to CMC and then change the path of input repository server and output repository server ?
other instillation is i want web server, app server and file server in three different boxes.
how can i do that ? does anybosy have step by step instillation guide which i can follow for this?
Can anybody help me with this ?
Regards,
Vipul

Hi Nikhil,
Thank you for your help.
I have installed BO on A Box. Now i want to put File server on box B.
So i am going to CMC --> Servers --> InputfFileServer
and in there i am giving \\abc.vic.internal\E$\Reports\FileStore\Input ( abc.vic.internal is completely new box where i have created FileStore under Reports folder)
i have done this same thing for Output folder
\\abc.vic.internal\E$\Reports\FileStore\Outout.
\\abc.vic.internal\E$\Reports\FileStore\Outout\temp
after this i am restarting both the servers and after couple of minutes when i go in the both the severs its showing me an error saying "THE REQUESTED DIRECTORY DOES NOT EXIST.".
but with windows explorer i can map to this folder and they are sitting there.
Please see the attached screenshot to see my exact error.
Can you please help me with this ?
Thank you in advance.

Does Refurbished iPad Mini have a different box?

Hi -
I am looking to get a new iad mini, but then noticed 15% discount in Refurb, is there a different box and is the actual ipad going to have scratches as all this may be an issue when coming to sell.
Thanks

Ok, Thanks

How to print text into different boxes in a main window

Hi,
     I divided the main window into 5 windows using boxes.
     Now how can I print different data into each of these boxes.
     The data comes from a print program .
Please suggest.

Hi
In smartforms you can create a template object or a table object and set the boxes.
after you'll create the text object into the templeate and set on which box the data will write.
best regards
Marco

How to maintain long texts in different languages in a message class

Hi All,
I have maintained a message and its transaltions in some other languages in a custom message class. I have maintined the long text in English language. But I am not getting how to maintain the long text in other languages.
Please help.
Regards
Kiran

Hi Kiran,
Good!
In the message class corresponding to that message give the place holders &&&&.
Like 001 &&&&
in the program.
Message <class>001 with text-001 text-002 text-003 text-004.
then you could disply long text.translation takes place if u enter in different language automatically.
thanks,
Sunil.

My mac keeps highlighting different boxes all the time and a text box has appeared on the screen that says what box is highlighted if the sound is turned up when you press a key or click on a box you are informed of the action any ideas what i can do?

Hi my Mac keeps highlighting different action boxes (on its own) all the time a strange text box has appeared on the screen that informs you if you press a key or click on a item. if the sound is turned up you are informed when a item is highlighted or a you click on a item HELP!

Hi Thanks for your help fixed the problem
Kind Regards
Nannedee

Different results in different boxes

Hello
I have a small swing application in Linux - Debian box. The application run correctly. However, when I run this application in a Suse box, there are some different results. For example, I have a button "Search" that search objects from database. When I click this button, a result is shown. It works OK in my Debian box. However, it doesnot work in Suse box.
As Suse box is a client's box, I cannot view the System.out.println message to debug
Something wrong with my application?. Please have some suggestions
Many thanks
shuhu

Who knows.
What do you mean "it does not work"? How does it not work? Does it crash? Does it run, but no data is displayed? Is data displayed, but the values are known to be incorrect? Is the data correct, but it causes your hat to turn into cheese?
If you can't test on the client's box, then you should try to set up a local test environment to duplicate the client's environment, and test there. If it doesn't break similar on the test environment, then you're just going to have to create some kind of trace/debug system that you can get the client to run. Perhaps provide a "debug" mode that produces a log or the like, then tell your client to run it in debug mode and send you the log.

Font sizes changed on different boxes.

Hello everyone,
I have a dilemna regarding my SMARTFORMS. The problem goes that on the DEV box the font sizes and working ok but when the forms were transported to the Staging (STG) box, the font sizes are smaller than those from DEV box. I am using SMARTSTYLE and a custom font. I have checked the forms and smartstyle from both boxes and they are exactly the same. The custom font is also installed in SE73. Now I don't know what to do next. Please help.

Hi ,
You dont have to ask them to create a new one . They will configure printers to other clients . You ask them whether u have have to use lpo1 or some other device type for printing in ur client .
I also faced the same problem . In development it worked fine where as in qa it gave the same font problems .
your basis person might have created some different output device in place of lp01 .
Regards

How to maintain one vendor with differant plants at differant states.

Dear All,
i have one scenario with me in that my client purchasing his goods from one vendor that vendor is having two plants one at mumbai & one at gujarat. Now how i will maintain these two address with the same vendor. Along with that i need to mainatin the tax structure for both in one vendor. While creating purchase order how buyer will pick the tax structure.
Regards,
Nandkishor Nachane

Hi,
You can create one main vendor code and use partne function to add address of different plant location.
regards,
zafar

Maintaining a Ztable in different box

Similar Messages

Maybe you are looking for