Maintaining access for different Pers Area for different Infotypes.

Hello,
We have two Pers. Areas.
1000 and 1020.
HR coordinator would like to see Certain
Info types(9011) for 1000 and 1020 &
other infotypes for 1020 ONLY in PA20.
I tried to put the P_ORGINCON
with different PA as below.
  Authorization level            M, R
  Infotype                       0000, 0001, 0002, 0008
  Personnel Area                 1020
  Employee Group                 *
  Employee Subgroup              *
  Authorization Profile          *
  Subtype                        *
  Organizational Key             *
Manually   HR: Master Data with Context
  Authorization level             M, R
  Infotype                       9011
  Personnel Area                 1000, 1020
  Employee Group                 *
  Employee Subgroup              *
  Authorization Profile             *
  Subtype                               *
  Organizational Key               *
We are not maintaining the Org level permission for this Role.
Please advice.
Regards,
PT,

Hi,
look here:
http://help.sap.com/saphelp_47x200/helpdata/en/49/4398375ae2f84ae10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/08/514e2143b511d182b30000e829fbfe/frameset.htm
A.

Similar Messages

  • Legacy data transfer for new depreciation area for already existing assets

    Hi all,
    I am doing legacy data transfer for New deprecaition area for already existing assets through AS92.
    I like to give Ordinay depreciation posted amount  for the current FY for these assets in AS92, but i find this field is not editable inAS92.
    Please guide me to upload the Posted deprecaiton amount (for current FY) for these assets. I have assets both which are acquired in Last FY year and also this FY year.
    Regards,
    Srinivas

    HI,
    I have to migrate Posted dpereciation for new depreciation for nearly 3000 assets, In transaction 147, where i need give Acquituion value aslo, please note these are not new assets, these are prior year assets wiht opeing balances. If we use 147 system will take it is current acquition.
    Please note my transter date is 28.02.2010, I have already run AFAB for this company cdoe Feb 2010 for other depreciation areas.
    Now i am trying to update Opening APC Cost and Opening Accumulated deprecation for these assets and also posted depreciation for this FY.
    Where in AS92, i am able to update Opeing APC Cost and Opeing  Acc Dep succsfully for new dep area for already existingassets, bu Posted deprecation field is not editable.
    Please guide me how to update posted deprecation for new deprecaition area  in AS92 or some other way for already existing assets.
    REgards,
    Srinivas

  • How do I get a refined for a gift are for 10$ I didn't mean to buy it

    How do I get a refined for a gift are for 10$ I didn't mean to buy it

    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Number range based on different business area for same document type

    Hi All,
    The scenario is my client wants to give the different number range for a particular document type based on different business area.
    Is there any user exit by which I can restrict the same.
    Regards,
    Meenakshi

    Hello,
    Document number ranges are created per company code and fiscal year. You cannot create / restrict the document number ranges per business area.
    Business areas a independent of all organizational values, they cut across all company codes.
    Regards,
    Ravi

  • Different sales area for Inter company stock transfer and STO

    Hi People,
                           Is it possible to have two different sales area's for Inter company stock transfer and within the company stock transfer. The problem is in below step
    IMG->MM->Purchase Order->Setup stock transport order->Define shipping data for plants.
    In this step when you define plant as customer, the same plant as customer needs to be maintaind for both STO and Inter company and there is only one entry of sales area possible for this single plant. So, how can the task be achieved.
    I want that STO should be carried out by sales area lets say X/Y/Z
    Inter company should go through A/B/C.

    hi dear,
               It is not possible at all to have two sales area for given Plant in STO.
               What is issue in that u can Transfer any MATERIAL, just need to extend it to given sales area.
    Reagrds
    AJIT K SINGH
    HAPPY TO HELP U

  • BAPI for getting Sales Areas for a Plant+material Combination........

    As per the SPRO settings,  you assign your plant to your sales org and Distribution Channel that means you are authorize your sales area to sell the material from a particular Plant
    Can any one plz help me in finding the BAPI that can list all the Sales Areas for a particular plant where the Material can be sold.....
    Thanks In Advance
    Abhi.......

    Hello,
    In DB table TVKWZ you can find the plants assigned to a particular sales areas.
    If you want to find the sales areas, in which the plant exist, select sales area info from TVKWZ by passing WERKS.
    If you want to find the plants exist in a particular sales area, select plants from TVKWZ by passing sales area info. To accomplish this, you can also use the FM "TVKWZ_GENREAD_WERKS".
    Hope this helps you!!
    Regards,
    Ganga

  • Generic UserID for a Subject Area for 10 users with individual my folders

    Hi Experts,
    I have a requirement to create a generic user for a subject area so that all the 10 users of that particular subject area should able login with the same username and if they create any reports it should be saved to their individual my folders, which means all the users should have their individual folders even though they login with one generic userid. Can anyone help me in this. Actually is this possible?
    Thanks in advance.
    Edited by: user12559013 on Feb 28, 2013 4:23 AM
    Edited by: user12559013 on Feb 28, 2013 6:10 AM

    Think about it...
    >
    all the users should have their individual folders even though they login with one generic userid
    >
    ...log on with one userid...for all intents and purposes they are THAT user.
    Not possible.

  • Different Depr Areas for different Company Code

    Hi Gurus,
    We have the followings:
    i   We have 1 Chart of Depr
    ii  Company Codes A & B (common ChoA)
    iii Depreciation Areas: 1, 2 and 3
    Each Depr Area has its own accounts in AO90.
    I check the "Depr Area block" indicator, say for area 3, when I do AS01 for company A.
    During activation through investment order (KO88, full settlement) I got a message:
    Error during acquisition transfer: Depr. area does not exist
    Diagnosis
    According to the specifications for transfer variant 5, depreciation area 3 should be transferred gross. However, the recieving asset GHY 110033-0 does not manage this depreciation area.
    Procedure
    Check the transfer variant and the receiving asset.
    The scenario would be that each company code would activate respective depr areas (of course beside the leading area, which is common for everybody), and later on each would see only the needed figures.
    I looked up the transfer variant settings but Iu2019m not sure about the settings.
    Is it possible anyway? Or I need to set up different Chart of Depr for each Co. Code?
    Thanks in advance
    M

    Normal you create 1 chart of depreciation by country with the same rules for all companies in that country

  • What are all of the different metadata areas for?

    In CS5, I notice there are lots of areas to enter info for an image, under IPTC Core, Audio, Video, DICOM and a Mobile SWF section.
    1. Is all of this info, if entered, embedded into the file?
    2. Where can someone view all of this info if they do not have Bridge on their computer?
    3. What is the point of using all of it? Is it a convention or standard practice for photographers to enter all of this info for every photo?
    Thanks!

    web.boards wrote:
    In CS5, I notice there are lots of areas to enter info for an image, under IPTC Core, Audio, Video, DICOM and a Mobile SWF section.
    1. Is all of this info, if entered, embedded into the file?…
    1. It is indeed in the file, written to metadata.
    web.boards wrote:
    …2. Where can someone view all of this info if they do not have Bridge on their computer?…
    2. In any program that can read metadata, and there are gazillions of those.  In Photoshop, for instance, you can go to the File menu > File Info.
    web.boards wrote:
    …3. What is the point of using all of it? Is it a convention or standard practice for photographers to enter all of this info for every photo?
    It's there for your convenience.  Use it as you need or as you wish.  It's all up to you.
    Most photographers make sure that at least the © copyright info is included.  Additionally many users put in information specific to the shoot, location, the author, any contact information, etc.  Use as much or as little as you want or need or as your clients ask you to include.  No more, no less.
    Many users strip all metadata.
    It's there for your convenience only.
    Wo Tai Lao Le
    我太老了

  • Substitution for MIRO Business Area for tax line items

    Hi All,
    Our business requirement is updation of BA in tax line items during MIRO transaction. To fulfill this requirement i have written a substitution with user exit. Business user enters BA in bktxt . In user exit iam passing bktxt field to bseg-gsber. But BA is not updating in tax line items. Here iam giving the code which i have written in my user exit. Pls guide me what to do aprt from this.
      IF bkpf-bktxt IS NOT INITIAL.
        t_gsber = bkpf-bktxt.
      ENDIF.
      IF bseg-hkont EQ '0000098511' OR bseg-hkont EQ '0000098521' OR bseg-hkont EQ '0000098583'.
        cobl-gsber = t_gsber.
      ENDIF.
      IF bseg-hkont EQ '0000098511' OR bseg-hkont EQ '0000098521' OR bseg-hkont EQ '0000098583'.
        bseg-gsber = t_gsber.
      ENDIF.

    update like below:-
    UPDATE dbtab FROM TABLE itab. or
    UPDATE (dbtabname) FROM TABLE itab.

  • Different number range for different  sales area but same order type

    i have 2 different sales area but i have assigned same sales order type for 2 different sales area,
    but i need the number range different for different sales area for that same sales doc type,
    is that there is any user exists for number range? if so how can i find the user exists

    Hi,
    You can surely have a different number range per Sales Area. For this you will have to make use of a User Exit (which would surpass the standard SAP functionality). Try USEREXIT_NUMBER_RANGE.
    Maintain the desired range in VN01 with the respective Range Keys.
    Make a custom table comprising of Sales Area and Number Range keys (same keys which you maintained in VN01).
    Now everytime, the system will check which sales area is used and accordingly, it will fetch the Number Range Key~Sales Area combination from the custom table, and will pick up the number range from VN01.
    Coding should done by a good technical guy to make this work nicely.
    Hope this helps you.
    Regards,
    Vivek

  • Different Asset value dates for different depreciation areas

    Hi All
    I have a requirement for different capitalization dates in different depreciation areas for some LATAM countries .How can this be achieved?

    Hi
    Hope you can achive this requirement by entering Depreciation calculation start date in depreciation area tab of asset master against each depreciation area
    Depreciation calculation start date
    'As a general rule, the system determines the depreciation start date from the asset value date of the first acquisition posting. However, you can also manually enter a calendar date in the asset master record for the start of depreciation. In that case, the system ignores the asset value date of the acquisition posting.'
    Please check different scenarios in development system and then do it
    Regards
    Praveen PC

  • Challan mapping not happening for employees belonging to certain per. area

    Hi,
    we are facing a problem with challan mapping for employees belonging to certain personnel areas.
    For other it is happening correctly.
    Any suggestion for the above issue?
    thanks,
    Ayyaps

    Hi,
    Check the feature 40ECC for the Personnel Areas for which challan mapping is not being done. The TAN returned through this feature should be same as the one used in the second screen of challan mapping. If both the TAN matches, then only you will be able to map challan with the employees.
    VK

  • Trying to create two login areas for one site

    I'm currently creating two different login areas for the site. One for my client to update content and one as a media/press area for downloads. Both areas work fine but it seems I can only do one login area because even if I use a different Connection script, one login area overtakes the other and you
    're stuck with one setup instead of two. How can I work this so each area has its' own separate login area?

    Instead of having two login forms, have one login form and utilize the user level controls. You will need to go to the login settings page and set/use the Level field on the database tab and then configure the user levels on the user levels tab.
    You simply route users to different subdirectories and then secure the files for those two user directories using different user level permissions.
    This removes the needs to maintain multiple connection files.
    That said, do your two different login forms have different names? Different ids? Different targets/actions?

  • In KA02 screen how can I get different functional area like (Production, Sales, Adminstration etc)

    In KA02 screen how can I get different functional area like (Production, Sales, Adminstration etc)

    Hi,
    Please check below configuration for defining functional areas for cost elements
    SPRO> FI > FI Global settings> company code> cost of sales accounting>Functional area > enter functional area
    Regards,
    Jyoti

Maybe you are looking for