Maintaining aspect ratio when transforming

Since I have upgraded to CS6 I've noticed that when transforming an object it does not maintain the aspect ratio even when I am holding shift while transforming. I have to each time check the link button (maintain aspect ratio)

It'll be because 'Snap Vector Tools and Transforms to Pixel Grid' is enabled in 'Preferences > General', an option that didn't exist before CS6. It's actually being more truthful that way because the transformed layer has to become an integer number of pixels wide and tall, anyway, and that's not going to be a perfectly proportional scale in most cases.
See what I mean by trying to scale an 11 x 10 pixels layer by 50%. It's impossible for that to be scaled by exactly 50% in width because the result has to be either 5 or 6 pixels wide (it will be 6). When the 'Snap...' preference is disabled (i.e. the pre-CS6 behaviour) you can scale the bounding box by precisely 50% in width but the pixels don't cover precisely 50% of the original width. When the preference is enabled, you won't be misled by being able to scale the bounding box to precisely 50% when the pixels cannot cover precisely 50%.

Similar Messages

Problems Maintaining Aspect Ratio When Importing

OK. So i've been at this for a few hours trying to figure out this issue im having.
I have exported a slideshow from iPhoto to iDVDin 16:9 format.
The slideshow is saved in my movies folder from that export as "slideshow.mov".
I am trying to take my "slideshow.mov" and import it to iMovie but after import the slideshow is playing in the Standard 4:3 aspect, in a 16:9 project.
I've read several support discussions and this is what i've tried so far.
1- Importing "slideshow.mov" into a DV-NTSC-Widescreen project. 29.97 FPS
2- Importing "slideshow.mov" into a DV-PAL-Widescreen project. 25 FPS
** Both of these has been tried with and without "Auto Pillarboxing" selected.
The reason im so stressed is because when I play "slideshow.mov" in both quicktime and iDVD, it playsback in the desired 16:9 ratio but iMovie still wont accept it.
Any advice or solutions would be awesome.
And if you're wondering, im trying to get it into iMovie to add a mix and matched audio track and transitions to it rather than the basic slideshow features from iPhoto.
Thanks,
Tyler
Macbook Mac OS X (10.4.9)

Try this:
Open the slideshow.mov in QT Player Pro and export it as a DV stream with the 16:9 flag set. Then import the .dv file to a widescreen iMovie project.
Then iMovie should treat it as 16:9.
Hmm... what is the frame rate of the .mov? The .dv should use the same fps but it is fixed at ntsc 29.97 or PAL 25 fps for .dv.

How do i transform a layer with maintain aspect ratio through scripting in Photoshop?

Hi,
How do i transform a layer with maintain aspect ratio through scripting in Photoshop? I am expecting your reply.
thanks,
Rajiv.s

I don't think your talking apples to apples. First I do not know of any Maintain Aspect Ratio icon in Photoshop. The only icon I think associated with transform is the anchor point icon in the option bar for transform. I think you may referring to the constrain check box in the image size dialog which you can check when resample is checked. Image size effect all layers in the document and the documents canvas size. The document canvas size will be changed to the values in the images size dialog and all layers will be transformed by percentage the canvas was changes while maintaining the layers position over the canvas and the layers I think may be cropped so only pixels over the canvas remain.
I do not know if you know that layers can be any size and have aspect ratios different then the documents canvas.
In your case it sounds like your describing a template that has a canvas size that is 2000px wide be 3000px high a 2:3 portrait aspect ratio. Your image file has a landscape aspect. If you place that image into your template place would by default transform the image so the image would fit within the 2000px by 3000px canvas size there would be a white border top and bottom. You could transform that smart object layer to it actual pixels size activeDocument.activeLayer.resize(100,100, AnchorPosition.MIDDLECENTER); then calculate the size you want to transform its height to. By retrieving the canvas size and the layers boundaries. Divide the canvas height pixel size by the layers pixel height size should give you the percentage you need to use. Make sure you set the ruler units to pixels so your working with pixel values for the canvas and layer size values. The resulting layer will be larger then canvas size keeping the anchor point centered will result in the canvas size masking off both sides. In effect cropping you landscape to a portrait. Note cropping a image from one orientation to the other changes the composition drastically.
If your trying to make a composit like collage you may want to look at my Photoshop Collage Toolkit it will fit images to fill a 2000px by 3000px area http://www.mouseprints.net/old/dpr/PhotoCollageToolkit.html
You could also do centered 2:3 crop that is resized to a 3000px

Can I maintain original aspect Ratio when making web Quicktime video

Hello there,
I have to convert at 16:9 Premiere file I originally made for DVD into a web ready format. Can I do this without distorting the image? In other words, I want to reduce the file size and keep the proportion intact.
Also, for future reference, what is the optimum aspect ratio when creating video content for web with Premiere?
Thank you in advance for your help.
M

Thank you Jim. Sorry for not replying sooner; I've been offline for a couple of days. Your reply is helpful and I'm
happy I won't have to squash my original 16:9 format movie to put it online.
Martha

Pasting from Illustrator to Photoshop doesn't maintain aspect ratio

I have vector artwork that is not aligned to a pixel grid in Illustrator. In CS5, I would be able to paste the vector object as a smart object into Photoshop file that was larger than the illustrator image and resize larger while holding shift to keep the ratio the same.
However with Creative Cloud, if I have a square in Illustrator that happens to be 17.3px by 17.3, then paste to Photoshop in a file that has a larger canvas than the paste, I get uneven horizontal and vertical ratios (width = 18; height = 17). It seems to overestimate the width and make it appear fatter horizontally (which is the wrong aspect ratio). This is very noticeable when vector objects (like perfect circles and small icons) get scaled up in Photoshop.
I have tried unchecking and checking "Snap Vector Tools and transforms to Pixel Grid" but this doesn't seem to fix it.
The only way I've been able to get this ratio to be kept is to create a new document with the size automatically changed to clipboard dimensions (which are the desired 17x17). When you paste as smart object, it now uses the correct aspect ratio.

When you paste an object into Photoshop take a look at your options bar to see if the Maintain Aspect Ratio button is checked. I'm guessing that it isn't which is why Illustrator objects are being pasted at different heights and widths. As you can see in the image below, a perfect circle from Illustrator is being placed in Photoshop at 100.05% and 99.44%. By checking the link button between the two percentages the numbers get locked to the same percentage so that the object is pasted in at the correct dimensions.

How to maintain aspect ratio?

I want export a video in 2.35.1, but want to maintain aspect ratio(and get rid of the black bars).
How can I do that in Compressor?
I can only figure out how to compress it. But can’t find any options for maintaining aspect ratio.
I know this can be done with QuickTime 7, but I don't have it.
Currently using Compressor 4

As mishmumken said, custom frame sizes can be
Specified in Compressor Geometry.
But I'm concerned that you may not have preserved the aspect ratio
When you exported from your editor
Here is a great tutorial that describes how to do that from FCPX.
Http://library.creativecow.net/articles/payton_t/FCPX_Custom-Resolution-Timeline s/video-tutorial
Russ

Empathy Video Call Doesn't Maintain Aspect Ratio

I'm using empathy 3.6.3-1 with gtalk, and I noticed that video calls don't seem to preserve aspect ratios. Does anyone else have this problem?

When you paste an object into Photoshop take a look at your options bar to see if the Maintain Aspect Ratio button is checked. I'm guessing that it isn't which is why Illustrator objects are being pasted at different heights and widths. As you can see in the image below, a perfect circle from Illustrator is being placed in Photoshop at 100.05% and 99.44%. By checking the link button between the two percentages the numbers get locked to the same percentage so that the object is pasted in at the correct dimensions.

Resize flash movie while maintaining aspect ratio?

Hey all,
We have created an extremely content heavy .swf file (1900 x
1400) for a presentation that runs full screen on a monitor at a
screen resolution of 1900 x 1400. I think that was the
resolution... I've been away from the project for a while and I
can't remember. anyways....
now we need to shrink the .swf down to a more reasonable size
so that we can make a cd rom out of it. Probably needs to be shrunk
to about 800 x 600. Is there an easy way to shrink the .swf in
flash from 1900 x 1400 to 800 x 600 while maintaining aspect ratio
and keeping all items on stage?
I sure hope so! I'd hate to have to recreate the entire
thing! It was a HUUUGE project with a ton of content.
Thanks in advance for any help or suggestions!!!!

Hey all.... I am just now working on this project.
I've created my .fla file and I'm trying to load a .swf into
an empty movie clip. It didn't scale down like I want it to and it
was still appearing as the normal size file. So I added the
container._height = 500; and container._width = 800; When I added
the width and height the .swf inside the empty mc container
disappeared!!!!! Any idea why???
Here is my code:
stop();
this.createEmptyMovieClip("container",
this.getNextHighestDepth());
loadMovie("hlhuntyears.swf", container);
container._width = 800;
container._height = 500;
container._x = 0;
container._y = 0;
I export it as an .exe since its going to be a cd rom and
when I double click the .exe to run it I get a blank screen. But
when I take out height and width it shows up but not to the correct
scale. The original file (hlhuntyears.swf) is 1440 x 900 and when I
run the .exe I can only see a tiny piece of it. Can anybody help??
please??

How to keep original aspect ratio when cropping in Camera Raw?

How to keep original aspect ratio when cropping in Camera Raw? Cant figure it out! With shift, the aspect ratio is 1:1. But I didnt set it to 1:1 (I checked "normal").

The Shift key works once you’ve set your crop ratio. DSLRs would typically do 2:3 and others sometimes do 3:4.

Set maximum aspect ratio when exporting

Hello,
I'm using LR5 and I'm wondering if it's possible (maybe with plugins if necessary) to set a maximum aspect ratio when experting photos. For example I have a picture that I cropped to be a panorama, with an aspect ratio of 26:11. The print shop can print at a maximum aspect ratio of 19:11. So my 26:11 image is too small and I need to add some bars at the top and bottom of my photo to reach an aspect ratio of 19:11 (see also the sketch below). Later, when I get the finished prints, I have to cut the bars at the top and bottom with a pair of scissors for example. Is it possible to let LR automatically add these borders for a given maximum apsect ratio?

Hi Victoria, thank you for your reply. I looked at the Mogrify plugin, but couldn't find the option I need. I see some options for canvas and resizing and adding bars, but these all require to set a certain absolute pixel dimension. I don't want to resize images to a specific pixel size, I just want to correct the aspect ratio by adding bars at the bottom and top of the photo. Maybe I'm missing something in the Mogrify plugin? Could you explain how I can add the borders automatically to reach a maximum aspect ratio of 19:11 using Mogrify? Just to be clear, all photos with an aspect ration between 11:11 and 19:11 don't have to be changed. Only photos with an aspect ratio larger than 19:11 should be changed to 19:11 by adding the bars.

Maintain aspect ratio on panel re-size

I think it would be valuable to have a panel attribute "Maintain aspect ratio on resize" that would apply to manual resizing (not maximizing) a panel.
I know this is doable with panel callbacks and EVENT_PANEL_SIZE but a native solution that shows that constraint while dragging a corner would be better.
And given the nature of many of our UIs I think this would often be used.
Any comments before I submit a product suggestion?
--Ian

Since this is now a LabVIEW question, I would recommend to post it in the LabVIEW forum!
The event structure has a "This VI...panel resize" event and you can probably use it to enforce a certain aspect ratio.
LabVIEW Champion . Do more with less code and in less time .

Cropping in PS while Maintaining Aspect Ratio and DPI

I shoot the Nikon D3, RAW (.NEF) and convert through ACR. Through ACR, the DPI is set to 300 DPI; the DPI caries over to Photoshop.
I crop in Photoshop using the crop tool (not marquee). To maintain 2:3 or 3:2 aspect ratios, the crop tool requires the width and height in inches or pixels. If specifying resolution, the document size will crop to that DPI, if not; the DPI is derived from pixel dimensions.
In my case, I’ve been cropping at 2in by 3in (or reverse for orientation). The resulting “real” image pixel dimensions are still very high (correct to crop size) but the document size reported in PS is 2in by 3in with a wildly high DPI. By changing the resolution back to 300 DPI through Photoshop, the document size returns to normal. Therefore the picture has not lost anything; it appears to only be a function of the Meta data. The pixel dimensions remain constant while the document size and DPI change.
It apears that you canot specify an aspect ratio via the crop tool without defining it in inches or cm. You can do it with the marquee tool but the marquee tool sucks for cropping. You can however crop in ACR with the crop tool by merely specifying the aspect ratio (not in inches or cm). In summary, the PS crop tool is based in inches or cm while the ACR crop tool is simply aspect ratio.
What I can do to crop in PS while maintaining aspect ratio and defined DPI. Is there a work-around, magic trick, or something else I can do to fool the PS crop tool into an aspect ratio not based in inches or cm?

Just to summarize:
Setting a dimensioned ratio (e.g., 2 in by 3 in for Width and Height) in the Crop tool without filling in a Resolution value yields a crop with the desired aspect ratio, and without any resampling.
There is no way to specify a ratio with the crop tool, specifically, as the OP has requested, though in a future version perhaps specifying simple numbers there without any units might be a way Adobe could facilitate this. It would be a nice addition and with little downside.
I guess what I don't understand, though, is why the OP cares about the "high" resulting dpi value? It's just a number.
Expanding on this, the Resolution is nothing but a metadata value that can be changed at will (e.g., through Image - Image Size... - uncheck Resample) at any time in the future. There is ALWAYS a Resolution value associated with the image, both before and after the crop (though the crop tool may end up changing it; so what?). In short, the Resolution is just an arbitrary figure until such time as the user wants to use the image for a purpose (e.g. printing).
Always think in terms of pixel dimensions (number of pixels horizontally and vertically) while editing, then think about dpi right before publishing. It's hard to go wrong this way.
-Noel

Scaling | Zoom (i.e. "maintain aspect ratio, scale to fill and crop to remove outside boundary"

Hi,
I have a mismatch on the aspect ratio of my source and visual display region. (And please just assume that I can not conform the visual display region to match the source's aspect ratio.)
Flash's default gives me ""scale to fit" which maintains my source's aspect ratio but results in "letterboxing" black space.
Does OSMF (or Flash) have a configurable property that will maintain aspect ratio, scale to fill and crop to remove outside boundary? Or do I just have to code my own solution (e.g. using masking)?
I have a diagram here:
http://flexflashvideo.com/codesamples/2010/zoom_crop.png
Thanks,
g

Have you tried with ScaleMode in OSMF?
     var layout:LayoutMetadata = new LayoutMetadata();
        video.addMetadata(LayoutMetadata.LAYOUT_NAMESPACE, layout);
   layout.scaleMode = ScaleMode.ZOOM;
Ryan

Can I maintain wider aspect ratios when I import mp4 video to a slide?

When I import mp4 video to a slide the aspect ratio changes. It seems to go from 16:9 to 4:3. Everything looks squished.

MP4 video always seems to have some quirk when using it with Presenter/Connect. Try converting the video to FLV and then importing it to Presenter.

How to maintain video aspect ratio when resizing

I am making a 30 second dvd intro of a dance recital video. I created 12 short clips that will be cuts between them. I do not want them to be full screen. I want to apply an effect that makes the clip have frayed edges and it is resized very small. I want to make them bigger so they arennearlynhalf screen. When I click and drag it, nothing keeps the aspect ratio. I held down the shift key, which usually works in all other programs but it had no effect. I tried other keys like alt but it was a no go. How do I resize without warping the video?

I have nothing on this computer aside from Adobe and a few other audio apps. This is a dual Xeon 6GB system. I work in IT and am MS certified. I do not think it is the system. I am using AE CS6. =A0Keyboard is set to its defaults. I do not touch the keyboard mappings. The effect brings the clip down to 10% or so. How should it be resized? SHift - click and drag works in all of my apps like Photoshop, so it isnt the kb or the system. Is that the way it is supposed to be done in AE? If you have AE, are you able to try this to see what I mean?

Maintaining aspect ratio when transforming

Similar Messages

Maybe you are looking for