Maintaining eCATT Scritps and Test Data files inMercury Quality Center Tool

Hi all,
As our client using Mercury Quality Centre for test management,
1. I what to Save my eCATT Scripts into Mercury Quality Centre Tool. How do this..
   2. Then i should able to run the same from Quality Centre. Steps for doing this.
   any one have the solution for this...
   Pl. tell me.
Thanks in Advance
sree..
Message was edited by: Rajesh Bhattathiripad .A

Rajesh, Hi.
There is a special Mercury solution that requires some professional services assistance but might be able to help you with getting a built-in capability for your eCATT scripts as a new test type in Quality Center. This new test type will give you the ability to:
    - Save a reference to your eCATT scripts in QC (not the entire eCATT test but a link to it on the SAP backend)
    - Run the eCATT script from QC
    - Save a log and the runs' status into QC after an execution of an eCATT script ended
For this to be implemented on your system, you should probably contact Mercury's PSO.
If you like to do it yourself (and this has a lot of work and knowledge involved), you can create your own "home-made" solution using SAP's Standard recording APIs and QualityCenter's VAPI-XP test type to generate a script that will call the SECATT transaction and actually execute it on demand.
Please note that saving the actual eCATT Blob into QC is not really possible since it is ABAP based and has to reside in the R3 system only.
I hope this can help a little.

Similar Messages

Upload test data file

Hi all,
After chaining the test data, is it req. to open test data container and upload the latest file?
How to Automatically pick the latest test data?
Regards,
Sree...

Hi Jwalith,
After a test data file is created in the system,
you add that to the container by going to the Varaints tab,
<b>select the radio button "External Variants / Path" and mention the path of the file where it is located in the system.</b>
All the varaints created in the file would be displayed in the variants list.
Hope this helps.
Best regards,
Harsha

Can anybody explain me difference between test cases and test data

Hi All,
Can anybody explain me difference between test cases and test data.
Testing procedure for FS.
Thanks & Regards,
Smitha

Hi,
Test case is a procedure how to do the testing of particular functionality and it consists the data that to be given for testing a particular requirement of the given Functional Spec and it also consists the result whether the desired functionality is fullfilling or not.
Regards
Pratap

What is the best software programs that I can use to read, write and modify data / files on external HD (NTFS format i.e. Windows) ?

Hi guys,
I’m new to Mac and have a MacBook Pro Lion OS (10.6.8 I think !!!) with Parallels 7 (Windows 7) installed. Can someone please tell me what is the best software program that I can use to read, write and modify data / files on external HD (NTFS format) from the Mac OS ? I heard of Paragon and Tuxera NTFS. Are they free ? Are they good ? Are there any other software programs out there ? I heard that some people have issues with Paragon.
Thanks.

Your best bet would be to take the drive to the oldest/compatible with that drive Windows PC and grab the files off, right click and format it exFAT (XP users can download exFAT from Microsoft) and then put the files back on.
Mac's can read and write all Windows files formats except write to NTFS (and in some cases not read) so if you can change the format of the drive to exFAT (all data has to be remove first) then you will have a drive that doesn't require paid third party NTFS software (a license fee goes to Microsoft) for updates.
Also it's one less hassle to deal with too.
.Drives, partitions, formatting w/Mac's + PC's

Forms pulling Multiple Records from an XML Schema and XML data files - Adobe LiveCycle Designer

I built a form in Adobe LiveCycle with an xml schema and data file. The problem is with how the form renders the xml data file.
I have a statement element that consists of about 6 fields (statementID, statementName, statementAddress, statementCountry, statementZip, statementDate, etc) of data in the schema that allows for multiple iterations - so one xml data file can contain multiple statements. These fields allow for null values.
But here's the problem: When any of the statements - say statement 2 of 6 - has a null value in one of the fields, if the xml data file doesn't have a placeholder
(example of placeholder: <statementName type="String"/> )in the xml for that field, my form pulls the field value from the NEXT statement.
This corrupts all the rest of the statement records, as this field is shifted up for all the rest.
I know that in the past I haven't needed a placeholder when a field was null. But I'm wondering if when the data allows for multiple records the xml data file needs to generate the placeholder. And where is the problem? In the Schema? The xml data file? My form? And the 64-thousand-dollar question: How to fix it?

If your <statement> element is the one that repeats, it should be bound to a subform with the binding string of something like $.statement[*]. Then in that subform should be your fields and they should have bindings of $.statementID, $.statementName, $.statementAddress, etc.
Kyle

SSIS and XML Data Files

Hello, everyone. As a SSIS newbie, I have a simple question about load XML data files with SSIS. Currently I have multiple XML files in a specified folder (C:\XMLData) using one XSD file. Since SSIS does not support expression language for XML Source component (unlike flat file connnection), do you know how to loop through all XML data files to load them into a table in a database? I guess I may need to do some programming in VBScript. Any help is greatly thankful
Thank you very much.

Since SSIS does not support expression language for XML Source component (unlike flat file connnection),
Are you sure about that? If you flip back to the control-flow and view the properties of the dataflow in question then you should be able to put an expression on the [XML Source].[XMLData] property.
Background reading:
Dataflow expressions
(http://consultingblogs.emc.com/jamiethomson/archive/2007/10/09/SSIS_3A00_-Dataflow-expressions.aspx )
http://sqlblog.com/blogs/jamie_thomson/ | http://jamiethomson.spaces.live.com/ | @jamiet

Erasing a config and vlan.dat file in Catalyst 4507R Switch

Hi,
I am unable to erase the configuration from Catalyst 4507R Switch.When i do "write erase" and reload the switch,the configuration still remains on the switch.
Switch1#write erase
Erasing the nvram filesystem will remove all configuration files! Continue? [confirm]
[OK]
Erase of nvram: complete
mp024-dc-nr00#sh start
startup-config is not present
After this i did reload and configuration still didn't get removed.
I tried
erase /all nvram:
reload
This also didn't help.
I also tried:
erase /all non-default
reload
This also didn't help.
Can anyone suggest how to erase the config on Catalyst 4507R Switch.
Thanks,

Hi Saroj,
do you see the below symtoms:
Cat4500# write erase
Erasing the nvram filesystem will remove all files! Continue? [confirm]y[OK]
Erase of nvram: complete
Cat4500# reload
System configuration has been modified. Save? [yes/no]: n
!--- Do not save the configuration at this prompt. Otherwise, the switch
!--- reloads with the current running configuration and does not reset to default.
Proceed with reload? [confirm]y
2w0d: %SYS-5-RELOAD: Reload requested
To erase the vlan.dat file on the 6500/6000 switches, issue the erase const_nvram: command. On the 4500/4000 switches, issue the erase cat4000_flash: command. On the fixed configuration switches, issue the delete flash:vlan.dat command.
HTH
Regards
Inayath

ECATT recording and testing

Hi there,
I have a question regarding testing eCATT. I have Golden client which I have authorization to create/change eCATT. However there is no test data in this DEV client. In other DEV client, it has test data but I don't have authorization to change/create eCATT. I can't create my record properly. Any suggestions?

I figured it out as I don't have authorization to RFC destination. ty

BUFFERIMAGE AND VECTOR DATA FILE DRAWING PROBLEM

THERE IS A VECTOR DATA FILE OF A COUNTRY/REGION OF CERTAIN PORTION. THAT IS FILE CONTAINS ONLY DATA IN (X,Y,Z) FORMAT OR ITS COLOR CODING OR WHAT TYPE OF SHAPE IT IS GIVEN BELOW
shape: Line, Color: red
no of vertices: 3
(234,543,45)
(34,567,345)
(76,234,345)
like above. a vector file exists. file is very heavy with lot of information. one needs to read the file and draw in java.
My problem is: i am reading the file properly, in paint function i have created BufferedImgae, createGraphics all necessary actions. i have also used rubber binding. using rubber binding when i select few portion of the map i found it is taking
lots of time to draw. once it is drawn when next time i am using RUBBER BAND SELECTION EXCEPTION occurs saying HEAP OUT OF MEMORY like.
one more thing if i used affinetransform it is simply zooming completely distorting my map defeating entire purpose.
how i can solve above problem using bufferedimage such that i can draw vector data file which should be faster when redrawing also using rubber band as well.
thanks in Advance
Roy

I have completely no idea what you mean by rubber banding. But you shouldn't be creating a BufferedImage and parsing a file inside of a gui component's paint function.
one more thing if i used affinetransform it is simply zooming completely distorting my map defeating entire purpose.AffineTransform is a transformation from one 2D coordinate system to another. It probably wont be as useful in a 3D environment such as your vector data file.

ECatt automatic testing and solman vs. HP quality center?

Hi!
We are planning to implement eCatt automatic testing functionalities as part of current solution manager test plan management tools so that part of test cases in target ERP system would be launced in tester worklist as automatec cases.
How do you see is there any advantages in eCatt if compared to HP Quality Center testing? Advantages and disadvantages of both?
Edited by: Arto Heikkilä on Nov 11, 2011 11:48 AM

Dear Alagammai,
How r u?
PFA the link which explains whole process with snapshots.
https://websmp204.sap-ag.de/~sapidb/002007974700000223272007E/QC.pdf
Please reward points if it helps.

Can you perform "ymodem" and "kermit" data file transfers from within Labview ?

If third party software vendors can do this, does anyone know who they may be ? In my application, the final product which I must communicate with is a finished commercial product which uses picodos as the operating system and accepts commands and transfers data over an RF Freewave modem, downloading and uploading files using both "ymodem" in procomm and "kermit"(old program) for large data files. I've got around most of the picodos stuff but I'm left with these two items which do not seem to be handled by National.
Help !!!!
Bryce Davis
email: [email protected]
902-426-3100 ext 284

I have searched through our database and the web, and I cannot find any information about these modem protocols. I cannot even find a standard so that you could implement the code yourself. You might consider contacting our aliance members--it appears that some of them had modem toolkits in the past. The aliance list can be found at http://exchange.ni.com/servlet/Redirect?id=6361480
Jeremy Braden
National Instruments

Address Book and iCal Data Files

In the standard Snow Leopard installation, what are the names of the data files for Address Book and iCal, and where are they stored? I have so much data in these two files that I want to be sure they're closely backed up.

you should back up your whole system not just those two files. then you'll never miss anything. what's your backup setup?
the address book data is stored in home directory/library/application support/address book and the ical data in home directory/library/calendars.

Lockbox Transmission Formats and Sample Data File

Hi All,
We are going to implement. For that we are going to use one of the standard transmission formats.
As per the oracle manuals we can use Convert (arconv.ctl) tranmission format for transferring payment information from other systems.However it does not containt the lockbox name and many other fields.
Please tell me whats the best standard format I can use and give me any sample data file formats if you have.
Regards,
MPH

Hi Thanks a lot for your reply,
Can you tell me if you have any data files created based on the BAI transmission format.
Thanks and Regards,
MPH

Cannot Save generated PDF, and associated data file is in french not english

Hello,
So I have 2 weird issues.
First, after I save my newly created form as a PDF, I send it off to my coworker, they cannot save the document after filling it out, only print. Checking the security settings on the document, everything is allowed except document assembly, changing the document, and creation of template pages, yet they cannot save the filled out form only print. Created in LiveCycle Designer ES 8.2 with Adobe Reader 9.
When I generated previewed data, the saved data is in french yet all of my settings are English including program, OS, and regional settings are all English US.
Need help asap.

Thanks for the reply.
The option I was trying to do is:
User has the Reader (form Reader Enabled using the full version of Acrobat before deployment. See licence restrictions)
user can open form;
fill it in;
print it;
data connections to databases and web services will NOT work;
user can save the form.
The actual answer to the question is this:
Enable Reader users to save form data
Ordinarily, Reader users can’t save filled-in copies of forms that they complete. However, you can extend rights to Reader users so they have the ability to do so. These extended rights also include the ability to add comments, use the Typewriter tool, and digitally sign the PDF.
Open a single PDF, or select one or more PDFs in a PDF Portfolio.
Choose Advanced > Extend Features In Adobe Reader.
The other question regarding the data in french is still unknown why it is doing that.

How to load Test data from a Text file in ECATT

Hi,
I have created a test configuration with a test script, system data container, and test data container.
I have done the recording of a transaction and created the script. Parameterization is done for the script and have imported those parameters from script in to the data container.
I am trying to load a the data from a text file on the local work-station. The data is not being read.
Please explain this in detail (step by step) as I am very new to ECATT.
I am trying this on SAP ECC 6.0 IDES server.
Thanks in Advance
Vikas Patil

Please explain this in detail (step by step) as I am very new to ECATT.
Thanks in Advance
Vikas Patil

Maintaining eCATT Scritps and Test Data files inMercury Quality Center Tool

Similar Messages

Maybe you are looking for