Maintaining Fixed Font Size Across Websites?

I find that there seems to many widths employed for web pages, with concomitantly different font sizes.
I am readily able to compensate by adjusting the width of each page by using +Command plus/minus+
Once I've adjusted a web page to a suitable width, is there any means to make that adjustment stick for whenever that page may be subsequently re-accessed?

Right now that field remains unchecked. I'm mulling over whether this would be helpful.
Since your main complaint seemed to be font size, I'm not sure how it wouldn't be. I use that setting on my 17" MacBook Pro and never have a problem with sites using too small a font. If font size is not the issue, you need to clarify.
What I'd really like is to achieve a fixed page width for each site that I frequent.
Why? That wouldn't affect font size, and would probably mess up the appearance of many sites that use fixed widths. It is conceivably possible, maybe, with the right CSS code added to Safari using Safari -> Preferences -> Advanced -> Style Sheet. But that wouldn't affect font size.

Similar Messages

  • Fixed font size in iWeb?

    In iWeb (and on my Mac) my webpages look fine. If viewed on other systems/browsers, the text sizes are horribly out of tune.
    How can I activate/use fixed font sizes in iWeb? Thanks!

    If you've not used iWeb before and have HTML experience give the Flux 4 demo a try.  It allows direcxt HTML injection into the web page along with drag and drop of div and other attributes. 
    Or give the EverWeb demo a try.  It's the most iWeb like of any of the available web site apps, is actively supported by the developers and has much more functionality than iWeb ever had.
    Flux 4 will have a steeper learning curve but they have excellent tutorial videos at their webstite and on YouTube.

  • Font Size on Websites

    When I go to certain websites, once they load, the font size is so large I can not view the website. Any ideas?

    Hi Mike,
    I checked system preferences and my resolution was
    correct. I also tried using other browsers such as
    yahoo and google but I got the same results. Next I
    will resett safari and see how that goes.
    Thanks again.
    Mike
    Hmm... Yahoo and Google are not browsers... unless you mean you went to those pages and they had large text as well. Try this...
    http://www.mactips.org/archives/2005/09/26/increase-font-size-in-safari/

  • Why does Dynamic Type change to a fixed font size when copied from one Note to another Note in the Apple Notes App?

    If I copy and paste text from one note to another, it pastes in at the current Dynamic Type size but is no longer adjustable. I have tons of notes with various fixed size text. Is there a way to reset all the text in the Apple Notes App to Dynamic Type so they can be adjusted using the font size slider in settings?

    When you use IMAP, as opposed to "On my Mac," Notes will create a folder called "Notes" on the mail server.  It will then store notes in there.  If you create subfolders in Notes (which you can do), those will be stored as subfolders of Notes on the server.
    So in the case of Gmail, you should be able to log onto your Gmail web account and the notes should probably show up in "All my Mail" with a label of Notes (this is because Gmail's IMAP implementation is VERY nonstandard and it doesn't actually support folders; it uses labels instead).  If you view the Notes label in Gmail's web interface you should see all your notes.
    Because of Gmail's IMAP implementation you should be very careful not to remove the "Notes" label from any of your notes if you're in the web interface, or they will disappear from the Notes app on OS X itself.

  • How to fix font size that is too small to read on each new page

    At Windows XP suggestion, screen resolution is set at 1280 x 1024 in Display Properties. Large fonts and large icons are selected. "Type" size on every new screen that comes up is so small that I can't read it without +++ to zoom in. Seems especially severe on web sites but email and regular applications (word perfect in particular) are also presenting such small font size that reading is very difficult without zooming in on every new page.
    What setting(s) adjustments am I missing?
    Or should I just disregard 1280 x 1024 suggestion and cut those numbers down?

    hey there steffvl & welcome to Discussions,
    it sounds as though you may have accidentally placed one of your movies into a Drop Zone... is the time shown for your Menu the the same as one of your movies? depending on the theme, some Drop Zones are hard to differentiate from the part of the Menu Page where you can drop/place movies. take a look @ the Map View for any alert warning symbols in the Menu Thumbnail. if you have dropped a movie into a Drop Zone, just place something else in there & then drag your movie to where it should be on the Menu. i hope it's something this simple.
    good luck.

  • Fixed Font Size

    Here is the issue:
    When I copy a table from a web page into the Rich Text Editor, it does look like the original. When I view the page, it looks like the original. However, I would like to lock the font size so that it cannot be changed in the browser. I can only lock font size via a "style" if the text is not within a table. But the table is needed for layout control.
    Any ideas?
    Thanks in advance for the help.

    If you've not used iWeb before and have HTML experience give the Flux 4 demo a try.  It allows direcxt HTML injection into the web page along with drag and drop of div and other attributes. 
    Or give the EverWeb demo a try.  It's the most iWeb like of any of the available web site apps, is actively supported by the developers and has much more functionality than iWeb ever had.
    Flux 4 will have a steeper learning curve but they have excellent tutorial videos at their webstite and on YouTube.

  • Increase default font size across all applications?

    I just got a new Macbook with a 15.4 inch 1400x900 screen resolution, and I am finding that the text on screen is really tiny in most cases (on the Apple menu it is fine).
    Even some buttons are tiny.
    Is there any way to increase the text size systemwide? Since the GUI is PDF based, it ought to scale well, right?
    I don't want to lower the resolution, because I naturally want to keep the sharpness.

    Hi, eobet.
    There's no way of doing this through the Mac OS X GUI itself. However, the freeware application TinkerTool permits you to "set nine categories of default fonts used in Cocoa applications." This permits you to change the font used and its size.
    This facility employs hidden settings within Mac OS X, so it's a bit of a hack and should be used with caution and at your own risk.
    The graphical elements of the GUI, such as the buttons you cite, cannot be changed other than by lowering the resolution.
    For the visually impaired, Mac OS X offers a Zoom option in System Preferences > Universal Access > Seeing. This permits one to magnify a portion of the screen to the full width of the screen.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • I'm a chinese, i downloaded english version of firefox. Everytime I get into facebk, the text in chinese are very small, even thou i've set the font size, it cant help! but only happened on facebk, why? can anyone fix it? i've been trying many times.

    firefox > Preferences Content : Fonts & Colors: Advanced Minimum Font Size/ Allow pages to choose their own fonts, instead of my selections above" '''i tryed but helpless'''

    If you need to adjust the font size on websites then look at:
    * Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
    * NoSquint - https://addons.mozilla.org/firefox/addon/2592

  • After the recent update the entire browser, including menus, icons, and everything on the web page, are too small. Fonts are smaller, pics are smaller, zoom settings will not remain universal. Minimum font size will make text readable, but all pics are to

    The new update has screwed up my browser settings, I cannot get them fixed and Im pissed because my computer is an eye-sore to read until this is fixed! EVERYTHING in the browser is smaller, fonts, menus, icons, web page content, pictures, tables, etc. I have set the minimum font in the settings and the text is just to a point where it is easily readable at the maximum size setting, but all the menus and icons are still tiny and hard to read. The last version I had installed worked fine with no add-ons needed. Everything fit the screen fine and was easily readable without modification. I want this version off my PC and I want the last version I had back on but I dont know what version it was!!!!!!! ARARGGGG
    In fact, this stupid troubleshooting window that I am in filling out this form doesnt fit the page right at all, and edges of the text are cut off, so Im not even sure what some of these boxes are asking for!!

    See [[Toolbars and page content appear too large after upgrading to Firefox 3]]
    *Try to adjust the DPI setting, see http://kb.mozillazine.org/layout.css.dpi
    *Try to set the pref layout.css.devPixelsPerPx to 2 on the about:config page.
    To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
    If you see a warning then you can confirm that you want to access that page.
    If you need to increase (or decrease) the font size on websites then look at:
    Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
    NoSquint - https://addons.mozilla.org/firefox/addon/2592

  • Pages are not scaled correctly, if you change the font size in browser (Fireworks export in CSS)

    I created some simple pages for my website with fireworks. I only used images and text and exported the pages in CSS and images. The Problem is that if you change the font size in the browser text and images or text and text often overlap each other. So what can I do that the page is scaled correctly?

    Yep, the "Font Size" option under Setup / Display is certainly not what it should be.
    Perhaps Menu or Fixed Font size would be more accurate.
    This problem extends to much of the device; the Browser, e-mails and the lock screen.  Lock screen certainly looks like it was thrown together.

  • I reset font size but it is gone each page. I want it to stay my way!

    I will use Firefox WHEN the font stays the size I want on each site. I am tired of changing it every time I hit a new page!!! It's a PITA. If it is not fixed, I'm back to I.E. 8.0 Thank you.

    If you need to adjust the font size on websites then look at:
    * Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
    * NoSquint - https://addons.mozilla.org/firefox/addon/2592

  • Font Size is not correct in the exported PDF-File

    In the Report is the Font Arial Size 8, but in the exported PDF-Fildethe size is only 7,15. The Fontsize in the PDF-File is always smaller then in the Report.
    I use Crystal Report XI. With Version 9 is everythink ok.

    In Crystal Reports 10 and 11, exported fonts are shrunk by 5% to avoid field truncation.
    For version 11, create the following registry entry and then set the value to 1 to maintain the font size:
    HKEY_CURRENT_USER\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\Export\PDF\ForceLargerFonts
    Please back-up your registry before editing.
    Cheers,
    Fritz

  • Can we change font size and font type in reports

    Hi All Technical/Functional Masters,
    We are developing some transactional reports in ISU. this report has 20 columns to be printed. On screen, display is not a problem but client has a requirement to download this report in PDF format and wants to print on A4-paper in Landscape. Although we have managed to accommodate all the columns on A4 paper but have to compromise with font size that are very small and not visible. If we download the report in excel format we are able to maintain the font size 8 and accommodate all columns after little format but same in PDF is a problem.
    Can anyone tell whether we can increase the font size and change font type(from SAP standard to 'Arial') before sending the output in PDF ? Is there any property or utility that can be changed or used for this purpose.

    Function Module : CONVERT_ABAPSPOOLJOB_2_PDF
    Include : THSTXWFPL
      for modify font size
    decrease fontsze foncharacter will increase
    fontsize = 120.     <-- Change
    fontsize = 100.  or fontsize = 80
    Depend on your logon lang. My case logon 'TH' or 2.  I modified font ZCORDIA (refer CordiaNEW thai font)
    if is_cascading is initial.
      case language.
      when '0'. "Serbian
        font = 'COURCYR'.  devtype = 'SAPWIN'.
      when '1'. "simpl.Chinese
        font = 'CNHEI'.    devtype = 'CNSAPWIN'. cjklang = 'X'.
      when '2'. "Thai
      font = 'THDRAFT'.  devtype = 'THPDF'.
       font = 'ZCORDIA'.  devtype = 'ZMTHSWNU'.
        font = 'THANGSAN'.  devtype = 'ZPDFUC'.
      when '3'. "Korean
        font = 'KPSAMMUL'. devtype = 'KPSAPWIN'. cjklang = 'X'.
      when '4'. "Romanian
        font = 'COURIER'.  devtype = 'I2SWIN'.
      when '5'. "Slovenian
        font = 'COURIER'.  devtype = 'I2SWIN'.
      when '6'. "Croatian
        font = 'COURIER'.  devtype = 'I2SWIN'.
      when '8'. "Ukranian
        font = 'COURCYR'.  devtype = 'SAPWIN'.
    Add font Cordia Thai
    SE73 --> Fon familia --> ZCORDIA
    Load Font Cordia thai to system
    SE38 --> RSTXPDF2UC
    load CORDIA.TTF
    SE73 --> printer font --> 'ZMTHSWNU'
    Add ZCORDIA font and copy AFM Metric from = 'THDRAFT'.  devtype = 'THPDF'.
    Modify AFM
    example
    *----- OLD--
    StartFontMetrics 2.0
    sapFamily ZCORDIA
    sapHeight 000
    sapBold false
    sapItalic false
    StartCharMetrics 0183
    WX 0500 ; N space                          ;
    WX 0500 ; N exclam                         ;
    WX 0500 ; N quotedbl                       ;
    WX 0500 ; N numbersign                     ;
    WX 0500 ; N dollar                         ;
    WX 0500 ; N percent                        ;
    WX 0500 ; N ampersand                      ;
    *--NEW--
    StartFontMetrics 2.0
    sapFamily ZCORDIA
    sapHeight 000
    sapBold false
    sapItalic false
    StartCharMetrics 0183
    WX 0375 ; N space                          ;
    WX 0375 ; N exclam                         ;
    WX 0375 ; N quotedbl                       ;
    WX 0375 ; N numbersign                     ;
    WX 0375 ; N dollar                         ;
    WX 0375 ; N percent                        ;
    WX 0375 ; N ampersand                      ;
    Result : decrease space between character.   Then Your PDF will have BIGGER FONT.
    Rdgs,
    Suwatchai

  • Web Gallery Template Font Size Adjustment

    When I am in the Web module and using one of the templates (Flash or HTML), I would like to be able to adjust the font size of all the text used for the titles, headings, captions, etc. In general, I find the default font sizes too small, especially on the Flash templates.

    Hi Swapna
    Try following:
    1. Test with standard Survey component. You can do this by removing assignment of enhancement set to a client.
    Use transaction SM30. Open table BSPWDV_EHSET_ASG to remove assignment. Now the standard component should be picked up during survey processing in Web UI.
    2. If the standard survey component is also not showing the note effect then you can check if the note is applied properly. There are some manual steps in the note which are normally overlooked.
    After applying the note the font size from the 'htmlb' tags will overwritten by a fixed font size specified in a css file(htmlb_style.css).
    After Applying the note please verify whether the htmlb_style.css is also imported. This can be done by the following steps
    1.Goto Transaction Se80, and then go to Repository browser.
    2.Select 'BSP application' from dropdown and the application as SVY_H.
    3.Expand the Mime folder. Here the file 'htmlb_style.css' must be present.
    4.Place the cursor on the 'htmlb_style.css' right click and select display from the menu. This would show the file with new font sizes.
    3. There is one more note from where you can download the latest css file(htmlb_style.css).
    Note 1356414 - Text gets cut off for long surveys
    Hope this helps
    Rupesh Patil

  • Change font size of JTree nodes dynamically

    hi,
    I have a requirement to change the font size of nodes in a JTree as and when the user wants.
    I have implemented a custom renderer for the JTree, but right now i have a fixed font size for all the nodes.
    How can I change the font size of JTree at runtime??
    thanks.

    I haven't done this, but it seems like
    public Component getTreeCellRendererComponent(...Object value,...) {
    Component c = super.getTreeCellRendererComponent(...);
    if (value!=null &&
    value instanceof(String) &&
    ((String)value).startsWith("A")) {
    c.setFont(bigFont);
    else c.setFont(littleFont);
    }It seems that this code is just making the font size of nodes begining with "A" bigger and the rest smaller.
    It doesn't solve my problem.
    I want to have something like a font chooser by which user can choose the font size they want for the JTree.
    any help ??

Maybe you are looking for