Maintaining PPO settings conflicts with vendor creation

Hello,
I am facing a strange issue. We are working on ECC 6.0 and we have REFX implemented. Also we have followed the note 956054 and made all the configurations mentioned in it for customer-vendor-business partner integration.
Now, when one of my colleagues tried to create a vendor using the transaction code XK01, she could fill up all the fields successfully. But, when she clicked on the SAVE button the system generated a short dump.
Upon analyzing the short dump it was found that it was coming due to a setting mentioned in the Note 956054. Under point 1.2 of the note, the procedure for setting up the PPO is mentioned. And it has been found that the short dump is coming only because of this configuration of the PPO.
Can someone please throw some light on how to resolve this?
Regards,
Suvarghya Dutta

Hi,
if there are errors while update in the CVI there are two possibilities:
1. PPO is not activated
Then a short dump is raised and it is possible to navigate in the dump to the variables that contain
further information about the dump (that is described in note 956054)
2. PPO is activated
No dump occurs and you have to check transaction for post-processing regularly if there are entries in the log because of updates that were not successful.
In a productive environment it is not suggested to activate PPO because that may lead to data inconsistencies. PPO is only thought for better error handling.
I prefer method 1., because you know immediately that something is wrong, you get no data inconsistency and by navigating in the debugger it is easily possible to find out the reason.
Regards, Franz

Similar Messages

  • House bank remit address conflicts with vendor bank data in FI02

    The house bank remit address is entered in FI02 base on the bank key or ABA number.  Since maintenance of bank address is the same in FI02 for vendor banks there is the potential of a vendor using the same Bank and routine vendor bank address maintenance to conflict or change our house bank remit address. Is there a way to enter remit addresses for house banks so they can't be accessed from FI02?

    hi deepa,
    it's not good because in the free selection if we will defined house bank he will be used for all the payments in the payment run
    and we need that in the same current payment run we have for  example vendor 1 - house bank xxx for vendor 2 - house bank yyy
    etc..
    i do not see in your suggest the above situation work
    regards,
    meir

  • Does Acrobat XI used w\ XenApp 6.5 conflict with "auto creation of client printers"?

    Hey guys,
      I have installed Adobe Acrobat Pro XI on a Server 2008 box running XenApp 6.5.  I've noticed a pattern that whenever Reader or Acrobat v10 or greater is installed the "auto-create client printers" policy does not work.  Our users log in to the web portal and open an app(Citrix hosted) such as Word; they try to print a document, but when looking at the printer drop-down list, none of their local(redirected) printers are present. These printers were available before the installation of Acrobat Pro XI.  Another user noticed this happened previously when they upgraded from Adobe Reader 9 to X.  Please let me know if you have any helpful information.
      I've enabled the following:
    Client Printer Redirection(allowed)
    Auto-Create Client Printers(all client printers)
    Client Printer Names(standard names)
    Default Printer(set def printer to client main)
    Desktop Launches(allowed)    ***This policy was the only one present before i started troubleshooting the missing redirected printers.
    Printer auto-creation event log preference(log errors and warnings)

    Was it related to this Citrix Support KB Document?
    http://support.citrix.com/article/CTX488760
    Might want to look at this Citrix Forum thread too:  http://forums.citrix.com/thread.jspa?threadID=286937

  • I have a 60G classic with a non-functioning center select button. Can I set a specific playlist and change settings by hooking up to my PC and then maintain those settings and that playlist once I go remote?

    I have a 60G classic with a non-functioning center select button. Can I set a specific playlist and change settings by hooking up to my PC and then maintain those settings and that playlist once I go remote?

    I'm having a little trouble understanding the part about your password having to be reset. Why is that happening??
    Let's start with Firefox's settings:
    (1) You can configure the password manager feature on this tab:
    orange Firefox button (or Tools menu) > Options > Security
    There is a checkbox to enable/disable the feature.
    There also is a "Saved Passwords" button to review and remove any passwords you do not want Firefox to keep.
    That tab also has a feature to set a Master Password so that no one can use your saved passwords without knowing the Master Password. You may need to exit Firefox in order for Firefox to ask for that again.
    Related articles:
    * [[Password manager - Remember, delete and change saved passwords in Firefox]]
    * [[Use a Master Password to protect stored logins and passwords]]
    (2) Site-specific permissions
    If you want to use the password manager for other sites but NOT a particular site, you can configure that in the Permissions Manager.
    In a new tab, type or paste '''about:permissions''' in the address bar and press Enter.
    After the page loads, use the search box in the upper left corner to narrow down the list to the site you want to configure. Highlight the site on the left side, and on the right side, choose Block under Store Passwords.
    (3) Form autocomplete suggestions
    Separate from passwords, Firefox remembers entries you've made into forms (in most cases) and lists the matching ones below the form field in a drop-down.
    To clear a suggestion, press the down arrow key to highlight it and press the Delete key.
    To turn off this feature, see this article: [[Control whether Firefox automatically fills in forms with your information]].
    To review and selectively edit or delete form history entries, you need an add-on. For example, you could try this one: https://addons.mozilla.org/firefox/addon/form-history-control/

  • Error in Vendor Creation

    Hi,
    In Vendor creation , while  selecting  the Country as United States ( US) in Vendor address the following error message is displayed
    "Communication error with the external tax system (VERTEX_MS0018)
    Message no. TAX_TXJCD864 "
    How to solve this issue?????
    Regards,

    Hi,
    Check the following entries.
    OBCO   : Check the schema TAXUSX  (VERTEX Standard Jurisdiction Code)
    OBCP   :  Select the costing sheet TAXUSX, check the tax jurisdiction codes
    IMG>Financial accounting new > Financial accounting Global settings > Tax on sales/puchases >basic settings > External tax calculation.
    Take FI consultant help make necessary settings.
    Regards,
    Chandra

  • Workflow for Vendor Creation through a portal.

    Hi All Workflow Experts,
                                         I have a scenario here.In my project  vendor is created through a portal.On submit button from portal the workflow is to be triggered.I have to design the workflow process.So can you please guide me through what all should i consider while i design this workflow?
    This is my first workflow assignment so if you explain in detail it will be a great help.
    I will just pen down what all scenarios i can think of:
    1.Start workflow after vendor creation or modification.
    2.Check whether approver are maintained in Org structure through  standard FMu2019s.
    3.Check If approvers are maintained ?
    4.If yes,approve or reject the vendor.
    5.If no,get the agents from the custom table who can take an action on this.
    This is what i can think of.
    Please guide me.
    Thanks in Advance,
    Saket.

    The corresponding BO related with the vendor creation or changing is LFA1 but this Business object doeanot have any events that are related to Create and Change , so try to create a ZLFA1 and add you own events or make use of delegation concept where you will create a delegation for LFA1.
    For your first isssue
    Start workflow after vendor creation or modification
    EXIT_SAPMF02K_001 Vendors: User Exit for Checks prior to Saving is the user exit where in you can call the workflow when ever you change or create , because this user exit will trigger when ever you try to save the vendor. so i think you can make use of this user exit
    For your second Issue
    Check whether approver are maintained in Org structure through standard FMu2019s.
    Make use of SWI_GET_USERS_OF_ORG_UNIT this fucntion mdoule to get the user of the ORG unit
    or you can create a Rule(for determining the agents dynamically) to find the approvers.

  • Conflicts with Lulu

    With the original release of 'Pages', there is a known conflict with www.lulu.com ( a book publishing site). Apparently .pdf files created from within 'Pages' do not embed Fonts correctly and a 'work around' is published at http://www.anvilwerks.com/pages_workaround/
    Does anyone know, whether the new updated version of Pages has corrected this problem?
    Regards... Chas

    Magnus, I appreciate your support of Apple. I'm a raving fan myself. But this isn't my problem. Consult the web. There isn't a single professional commercial ripping software (the software that printers use to parse PDFs and prepare them for their printers) that can parse these PDFs. Not one. And this problem began with the introduction of OS X. The only reason that you may not have heard about this is that most high end graphic designers on Apple platforms use Adobe products, like Pagemaker or InDesign now. And--of course--Adobe products can create PDFs that can be read. So those people don't ever encounter this problem. Because of course Adobe PDFs are compliant with Adobe's standards. (Unfortunately you can't even use the "print to" option to use the Acrobat Distiller from the Pages print dialogue. Somehow Pages overrides the settings and forces the distiller to create multiple redundant subsets.)
    Where the problem got magnified is with the advent of Pages. Here's why. People see Pages as a layout and design software "for the rest of us." And rightly so. This, I believe, is Apple's intent. So a lot of people have started using it in the past two years.
    Some of those people switched from Microsoft Publisher--which, while not a professional layout program--is a ton easier to navigate than InDesign. Some of these people expect to be able to print with a commercial service. So when they go to try, they use the native OS X PDF creation tool, and then discover to their horror that not all PDFs are created equal.
    Now professionals know this, but your average user does not. They're just told that PDFs are a universal format. Everyone can open it and read it. They send of the doc to be printed and it won't work. I tell ya, Magnus, this problem is out there on the web a thousand times and thousand times.
    Subsetting is a useful tool. It reduced PDF file sizes. That was critical when we were all using dial-up connections. It's still helpful today on large documents. But all I'm asking for, all these people need, is a switch somewhere that allows it to be turned off. That's all. Nothing more. Just a switch that allows it to be turned off. You need three basic options: (1) Embed the entire font whole, should the permission bit allow it. (2) Subset the fonts to save space. or (3) Neither embed nor subset, forcing the document to use a Multiple Master font (Arial, Times NR, etc.)
    I've decided that I will have to re-layout my booklets in InDesign. I know the file will be accepted just fine. That solution works for me, but it isn't a good one. Adobe CS2 costs nearly $700.00. I own it, but most desk-top publishers do not. The people that Apple is targetting with iWork generally do not. I can invest the several hours necessary for this task. But it's too bad that I have to.
    After a lot of research I learned that Apple switched to forced subsetting after they had a problem in their PDF generator with embedded graphics. Somehow this change fixed that problem. But it created--in my opinion--an even larger one. If you can't get your PDF to print with a commercial printer, what's the point?
    While I've already started on my InDesign revision, I'd still like to see or hear a solution to the problem. There are a lot of people who love Pages (and I hope it will continue to grow and evolve to the point where I never have to use a Microsoft product again...) and want to use it for all their layout needs. Right now this is a roadblock that will keep this from happening.

  • Infotype to link Personnel Number with Vendor Master Record

    Hi All,
    pls help me what infotype to link Personnel Number with Vendor Master Record in AP module.
    Customer require when Create Employee then system automatic gernerate Vendor Master.
    pls help us.
    Thanks

    Hi,
    PRAA works absolutely fine. I have external number range for vendors.
    There is an option so that you can create HR accounts in vendor accounts
    Path:Accounting> Financial accounting>Travel
    management>Personal-Related Master Data> Create Vendors (tr.code PRAA)
    Look at this description:
    From the HR master data, this program creates a batch input session for
    maintaining person-specific vendor master records.
    The report can process vendor master records as follows:
    o Initial set up (create/add missing company code segment)
    o Uupdate (change completely according to vendor and HR reference)
    o Change (only according to HR master data, for example, name
    Block
    The following infotypes from HR master data are taken into account for
    the key date specified:
    o Actions (Infotype 0000)
    o Organizational Assignment (Infotype 0001)
    o Personal Data (Infotype 0002)
    o Permanent Residence (Infotype 0006 Subtype 1)
    o Bank Details (Infotype 0009 Subtype 0 or 2)
    All other required data is taken from a reference vendor that you can
    specify as a parameter when you start the program. Note that for the
    reference vendor, reference data must exist for all company codes that
    are applicable according to HR master data. Since program RPRAPA00 cannot
    assign vendor master record numbers externally when creating
    vendor master records, you must be sure that the reference vendor is
    assigned to an account group that requires internal number assignment.
    If no house bank is specified in the reference vendor, this is
    determined via feature TRVHB (Implementation guide for 'Travel Expenses'
    -> Transfer to Data Medium Exchange -> Set up Feature for Determining
    House Bank according to the employee's organizational situation.
    The link between the HR employee's master record and the corresponding
    vendor master record is set up by entering the personnel number in the
    company code segment of the vendor master record.
    General program flow
    Program RPRAPA00 creates a sequential work file in the specified
    directory. Ensure that you use a global directory that can be accessed
    by all application servers; a directory is automatically proposed. The
    work file is later transformed into a batch input session by the
    subsequent program RFBIKR00, which is started automatically.
    In test run mode this program delivers information messages which
    document the creation of a batch input session. Since each information
    message must be confirmed manually, the test run should only be
    performed for a small number of personnel numbers.
    In productive run mode, however, the program RFBIKR00 is automatically
    started as a job; the information mentioned above is stored in the job
    log in this case.
    Initial setup of vendor master records
    Corresponding vendor master records are created from the infotypes
    listed above and the non-HR-specific information from the reference
    vendor. During the process, the personnel number is stored in the
    company code segment of the vendor master record. Persons who already
    have a vendor master record with corresponding personnel number are
    rejected in this run.
    If a vendor master record already exists for a personnel number, but
    without a company code segment for the company code in which the
    employee exists at the key date entered, the program adds the required
    company code segment to the vendor master record. You must however
    activate the checkbox "Create new company code segment for existing
    vendor master records".
    The HR master data used is the info type record valid on the key date
    entered.
    Update of vendor master records
    The corresponding vendor master records are updated from the infotypes
    listed above and the non-HR-specific information from the reference
    vendor. Persons who already have a vendor master record with
    corresponding personnel number are rejected in this run. The system uses
    HR master data from the infotype records valid for the key date.
    Change vendor master records according to HR master data
    All HR-specific data is changed in the vendor master records for
    personnel numbers that have changes since the date recorded under '...
    with last change since'. The system uses HR master data again from the
    infotype records valid for the key date specified.
    Block vendor master records
    All vendor master records which correspond with the selected personnel
    numbers are blocked for posting.
    User exits
    For the following situations, two empty routines are supplied in the
    includes RPRAPAEX and RPRAPAEX&H5F001 which you can adapt to your
    requirements.
    o The employee's last name is entered in the sort field in the vendor
    master record. If you do not want this to happen, you can program
    the situation you want in the user exit routine
    'set&H5Fmc&H5Ffield&H5Fby&H5Fuser'.
    o If the address editing in the vendor master record does not suit
    your requirements, it can also be changed. For this purpose you have
    the user exit routine 'set&H5Faddress&H5Fby&H5Fuser'.
    o If you want to assign numbers to the vendor master records to be
    created via external number assignment (for example, vendor master
    record number &H3D personnel number), you can adjust the user exit
    routing 'SET&H5FVENDOR&H5FNO&H5FBY&H5FUSER' (in include RPRAPAEX&H5F00). Note
    that
    the account group of the reference vendor must also have external
    number assignment.
    Note that in each case a thorough knowledge of the programming
    language
    ABAP/4 is necessary.
    Set up vendor master records in a separate system
    The distribution of personnel master data from a HR system to an FI
    system is a prerequisite for creating, changing, and blocking vendor
    master records.
    In the section Master Data Distribution (link to separate HR unit) of
    the ALE IMG, an explanation is given regarding the way in which the
    FI
    System is supplied with the relevant employee data from the HR System
    In the FI System, report RPRAPA00 described here can be used to
    create,
    change, and block vendor master records.
    Other wise try with VPE1 t.code.
    Regards
    Devi

  • Distiller Error / Conflict with MainType

    Hello!
    I am getting an error window from Acrobat Distiller while using a font management program called MainType (www.High-Logic.com)
    I have attached a screen shot.
    Before the error window pops up, everything slows down to a crawl. It's just really annoying to have the error message pop up about every 5 minutes or so.  Is there a way to turn off or disable Distiller while I'm using MainType? If not, is there a setting I can change to fix this?
    Here is my system info:
    OS Name      Microsoft Windows XP Professional
    Version          5.1.2600 Service Pack 3 Build 2600
    OS Manufacturer     Microsoft Corporation
    Activation Status      Activation Pending (30 days remaining)
    System Name           84A-105-21740
    System Manufacturer         Hewlett-Packard
    System Model           HP Compaq dc7600 Convertible Minitower
    System Type X86-based PC
    Processor      x86 Family 15 Model 4 Stepping 7 GenuineIntel ~2791 Mhz
    BIOS Version/Date  Hewlett-Packard 786D1 v01.54, 11/14/2005
    SMBIOS Version      2.4
    Windows Directory  C:\WINDOWS
    System Directory      C:\WINDOWS\system32
    Boot Device  \Device\HarddiskVolume1
    Locale            United States
    Hardware Abstraction Layer          Version = "5.1.2600.5512 (xpsp.080413-2111)"
    User Name    CSUMB\ehle3854
    Time Zone     Pacific Daylight Time
    Total Physical Memory       1,025.00 MB
    Available Physical Memory           353.93 MB
    Total Virtual Memory           2.00 GB
    Available Virtual Memory   1.96 GB
    Page File Space      2.39 GB
    Page File       C:\pagefile.sys
    My computer is on a university system so I'm assuming Acrobat Distiller is ran from a server.
    Acrobat Distiller 9.1 2/27/09
    Any and all help is appreciated - thanks!
    Diane

    Hi Dilek,
    Thank you very much  for the reply.
    I went to the path which you mentioned upto below.
    Personnel Management - EMployee self-service - Service-Specific Settings - Working time - Leave Request - Processing Processes - Configure output of messages -
    We did nt maintain any rule group for customizing tab.Sap standard is showing as rule group.No details has been maintained.
    Alot of employees are having substitutions,most of the  approvers are able to approve leaves of the employees who are having substitutions.This is a peculiar case,where the approver is getting an error with conflict with substitutions.
    In R/3 we are getting a warning message and able to save the leave for this employee.
    Even i tried with other employees who are having the substitutions,system is behaving the same.
    Please advice me to resolve the problem.
    Regards,
    Sairam.

  • Error "Conflict with Substitutions (IT 2003/02) from 01.04.2010 to 31.12.99

    Hi Experts,.
    We got a query on approval of leave from Portal. Could you please help me in resolving the issue.
    Manager was unable to approve the leave for one of his reportee on a specific date.
    The reportee applied for Casual leave for a half a day on 29.06.2011.Thje leave request has to come work list of the approver.
    When approver/manager tries to approve this leave for the reportee, system is throwing an error that u201CConflict with Substitutions (IT 2003/02) from 01.04.2010 to 31.12.9999.
    I have checked the IT 2003 for the reportee and found a record from the date 01.04.2010 to 31.12.9999.
    Why the system is throwing an error for the employee. Please share your idea to solve the problem.
    Regards,
    Sairam.

    Hi Dilek,
    Thank you very much  for the reply.
    I went to the path which you mentioned upto below.
    Personnel Management - EMployee self-service - Service-Specific Settings - Working time - Leave Request - Processing Processes - Configure output of messages -
    We did nt maintain any rule group for customizing tab.Sap standard is showing as rule group.No details has been maintained.
    Alot of employees are having substitutions,most of the  approvers are able to approve leaves of the employees who are having substitutions.This is a peculiar case,where the approver is getting an error with conflict with substitutions.
    In R/3 we are getting a warning message and able to save the leave for this employee.
    Even i tried with other employees who are having the substitutions,system is behaving the same.
    Please advice me to resolve the problem.
    Regards,
    Sairam.

  • Flash Player 10 does not work in IE or Firefox. What could it conflict with?

    I'm  using Firefox 3.6.8 (and sometimes IE 8.0.6001.18702IC) on Windows XP Pro, SP 3.
    For some weeks now, I have been unable to hear any sounds on anything Flash-based, from YouTube to games at MSN.com or embedded videos on any site using Flash.  Initially I had assumed it to be because of having QuickTime installed because I know QT likes to hijack everything.  I uninstalled QT (and Real Player) and Flash Player then reinstalled Flash Player (and Shockwave Player just in case) and guess what?
    Yup.  Nothing.  When I uninstalled everything, I used a program called Revo Uninstaller, which includes a registry cleaning option.  I then used Abexo and WinASO's registry cleaners to make sure I got everything else that even looked like QuickTime off my hard drive.
    When I reinstalled Flash, the following programs appeared in C:\Windows\system 32\Macromed\Flash:
    Flash 10i.ocx (10.1.82.76)
    FlashUtil10i_ActiveX (10.1.82.76)
    FlashUntil10i_Plugin (10.1.82.76)
    genuinst (6.0.2800.1531)
    FlashUtil10i_ActiveX.dll (10.1.82.76)
    NPSWF32.dll (10.1.82.76)
    KB931433
    FlashInstall
    Install
    Flashplayer.xpt
    When I check IE's "Tools" and look for add-ons, it says that Flash (Shockwave Flash) is enabled.  I even enabled the other Adobe add-ons for Acrobat and such just to be sure.  Firefox shows Shockwave Flash and Shockwave for Director both to be enabled.  The Flash control panel settings don't help: I have all sites set to store about 100 KB on my computer to make sure there's enough room for everything but still nothing.
    Before anyone asks, my audio drivers are up to date, thanks to the manufacturer's website.  I have DirectX 9.0c installed and everything else works fine.  I can play audio and video elsewhere with no problems.  It's only Flash that's showing me this trouble and there's no hint as to what else could be interfering with Flash.
    Any ideas?

    Well, great.  I tried the uninstall/reinstall before, but not with the uninstaller, so I was hopeful that this time might do it.  No such luck.  The video still plays, but no sound.
    All the sound settings are working with everything else from games to media players.  I set Windows' firewall to allow both the ActiveX and plugin for Flash, just in case.
    In the Flash folder, I now have:
    Flash10l.ocx (10.1.102.64)
    Flash Util10l_ActiveX (10.1.102.64)
    FlashUtil10l_Plugin (10.1.102.64)
    Genuinst (6.0.2800.1531)
    FlashUtil10l_ActiveX.dll (10.1.102.64)
    NPSWF32.dll (10.1.102.64)
    And the setup and text files that went with 'em.
    I've also done a system restart since then and zip.
    I went through IE and Firefox and looked for any file associations (like .flv) that I could manually change over to using Flash, but no go.  The settings panels for Flash have all been set to allow YouTube specifically (as a test) and to allow 10KB of storage space for all affected sites.
    Now what?  I'm really not looking forward to a reformat and reinstall, but it's looking like that's what it's going to take.
    Date: Sun, 14 Nov 2010 17:37:07 -0700
    From: [email protected]
    To: [email protected]
    Subject: Flash Player 10 does not work in IE or Firefox. What could it conflict with?
    Something is strange with your list of modules; you list FlashUntil10i_Plugin (10.1.102.64), but this is really 10.1.85.3
    I recommend that you uninstall Flash Player completely (using http://kb2.adobe.com/cps/141/tn_14157.html), then restart Windows, and delete all remaining files in C:\Windows\system32\Macromed\Flash.
    Next reinstall both ActiveX (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and the plugin (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe).
    After that, if the problem persists, have a look at this page http://kb2.adobe.com/cps/837/cpsid_83739.html
    >

  • Firefox 25.0.1 Warn when closing multiple tabs (on) conflicts with "show windows und tabs from last time" (on); need both, but only one or the other works.

    Using Firefox 25.0.1 on Windows 7 Home Premium
    I've poured through support forums for Mozilla Firefox searching for a fix to my initial problem of the "Warn when closing multiple tabs" pop up not popping up when I have it selected.
    Went through About:Config, making sure warnings for tabs und closing, und showing on quit, und quitting, etc. were all set to true, which were "possible" fixes for the issue I was having, there are like five or six things set to true for warnings/quitting/etc. No avail. They are all set to true.
    Then I stumbled across one that suggested a conflict with the "Warn When Closing Multiple Tabs" und the "Show Windows und Tabs from last time".
    I use both features. However, I found if I want the warning pop up for closing multiple tabs, I have to have "show homepage" or "show blank page" selected instead of "Show windows und tabs from last time" selected. (Tools>Options>General>Start Up>When Firefox Starts:) The problem with this is, yes, I get my warning pop up, BUT, I don't get my tabs from my last session.
    The warning in settings (Tools>Options>Tabs>Warn Me When Closing Multiple Tabs) is checked.
    To have my tabs restored from last session, I simply select it for "when firefox starts". Bam, I have my tabs that were open from the last time I quit. Und again, full circle, I don't have my warning pop up.
    There were also suggestions of the warning on close for tabs is conflicting with add-ons.
    However, I don't have many. Und I have yet to test them to see if they interfere. These are according to my Add Ons tab when I check it myself.
    Extensions:
    1. Avast WebRep (disabled)
    2. HP Smart Web Printing (disabled)
    Plugins:
    1. Adobe Acrobat
    2. Google Update
    3. iTunes Application Detector
    4. Java (TM) Platform SE 7 U45
    5. Shockwave Flash
    6. Shockwave For Director
    7. Silverlight Plug-In
    8. VLC Web Plugin
    9. Windows Live Photo Gallery
    10. Java Deployment Toolkit (disabled)
    Note: The Details Firefox provides says I have these for Plugins
    * Shockwave Flash 11.9 r900
    * Adobe Shockwave for Director Netscape plug-in, version 12.0.5.146
    * Next Generation Java Plug-in 10.45.2 for Mozilla browsers
    * Google Update
    * Adobe PDF Plug-In For Firefox and Netscape 11.0.05
    * VLC media player Web Plugin 2.1.0
    * 5.1.20913.0
    * iTunes Detector Plug-in
    * NPWLPG
    Unsure of what the "5.1.20913.0" und the "NPWLPG" plugins are, but they don't appear to me under Add Ons.
    Und as usual, I'm assuming the solution lies within About:Config, I will show here now what I have set to True.
    browser.tabs.warnOnClose - True
    browser.tabs.warnOnCloseOtherTabs - True
    browser.tabs.warnOnOpen - True
    browser.warnOnQuit - True
    browser.showQuitWarning - True
    As aforementioned:
    The seemingly only issue is the conflict between Show Windows/Tabs From Last Time und the Warn On Quit pop up. Und again, I need/want both of them. More so the tabs from the last session, but I really really really really really want the warning.
    So, if anyone knows a work around, preferably without having to download anything to fix this, I would be extremely grateful.

    You mention a second subject.
    ''I'm probably going to downgrade to another version of firefox that was suggested to me since I'm also having issues with shockwave flash causing firefox to hang und ultimately needs to be force closed otherwise having to have flash disabled to use firefox.''
    <u>Downgrading Firefox </u><br />
    Flash is notorious for causing Firefox problems. I suggest you start a new thread about that. If at all possible you should try to avoid downgrading to an unsecure & unsupported version of Firefox. it will increase risks to your system and Personal data. (There are methods of mitigating the risks, using a virtual machine or operating within a secure intranet for instance)
    *(Do Not) [[Install an older version of Firefox]]
    <u>Try Flash with Protected Mode Off</u><br/>
    Worth a try as it takes minimal effort & often solves Flash Problems whilst allowing current and more secure FlashPlayer to be used. See
    * http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
    * http://forums.adobe.com/thread/1018071#TemporaryWorkaround
    If you wish to pursue these subjects further I note you have already started a thread you may as well continue the discussion in that thread, but also post back here so we can follow both.
    * ''Firefox is having "Script" issues (Not Responding) und possibly Flash issues?'' [/questions/978181]
    ** try ensuring you close down Firefox using the menu, that may even help with Flash problems.
    <u>Your experience in submitting troubleshooting information on the forum</u><br />
    (This is out of curiosity, but with the intention of pressing for changes if forum faults are discovered.)
    There are yet more changes to this forum underway. Mozilla recently tried to improve the experience for first time users of the forum and a troubleshooting app option was included in the workflow to try to encourage users to submit full troubleshooting information.
    I would be interested to know what you thought
    I sometimes wonder if users are not trying to use that, or whether forum users run into problems in using it. At one point I wondered whether there was a problem if too much data was included but never actually proved that conjecture.
    Assuming you are using the forum, and not merely replying by email look towards the top in the right hand margin for clickable buttons
    * Question Details -V- More System Details -> [Additional System Details]
    You will note that includes only partial information. There are no changed prefs or extensions listed. Compare for instance the information in this thread [/questions/978130] with full information.
    I believe your mystery plugins are Windows related
    * NPWLPG relates usually to Windows Live Photo Gallery
    * 5.1.20913.0 will be Silverlight

  • Troubles with the creation of New Custom Adapter for NW 7.1

    Hi guys !!!
    I have some troubles with the creation of a new custom adapter for NW 7.1. I have followed some pdf and notes, like :
    [Upgrade an SAP NetWeaver PI 7.0 Adapter to SAP NetWeaver PI 7.1|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0667f56-96c7-2b10-0e9a-c40fbd523f4d]
    note : 1004000
    I have all the materials to make the custom Adapter ( like file .sca with all .rar and .sda , like file sample_ra.rar with all the file .java, like all the libs for the projects ) and I have make it !!! But, when I try do deploy it, i recieve a warning that i don't understand, this is the warning :
    S U M M A R Y
    ~~~~~~~~~~~~~~~~~~~
    Successfully deployed:           0
    Deployed with warnings:           1
    Failed deployments:                0
    ~~~~~~~~~~~~~~~~~~~
    1. File:C:Users
    maienzaDesktopCreazione del SDAPI71_AF_myFirstCustomAdapter_ver_2.0.sda
         Name:PI71_AF_myFirstCustomAdapter_ver_2.0
         Vendor:sap.com
         Location:SAP AG
         Version:7.1007.20090310105326.0000
         Deploy status:Warning
         Version:NEW
         Description:
              1. Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
    No one of the [EJBContainer] containers, which processed it, returned deployed component names.
    The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
    Possible reasons :
         1.An AS Java service, which is providing a container, is stopped or not deployed.
         2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
         at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
         at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
         at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
         at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Result
    Status:Warning
    I have see in the nwa if there are some applications or services that are stopped but all the necessary it's started, just one question : in the pdf for upgrade from 7.0 to 7.1 no one speaks about ejBean or about a creation of it ... it's necessary an ejBean ?? Beacause in the file .sda of the file .sca that i have downloaded there are more of the adapter with ejBean ....
    Antonello

    Hi,
    the adapter metadata it's been created but my service is still stopped; when I try to start it, in the NDWS -> Deploy view -> tab Repositary view, I receive this errors, one after the other, cause I try to start it 3 times and in each time I received 3 differents errors :
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
         at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
         at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
         ... 30 more
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
         at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
         at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
         ... 30 more
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
    No one of the [EJBContainer] containers, which processed it, returned deployed component names.
    The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
    Possible reasons :
         1.An AS Java service, which is providing a container, is stopped or not deployed.
         2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
         at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)

  • Replacement order with vendor

    Hi experts
    I have a question on if SAP supports an replacement order with vendor.
    The scenario is the client could do a return PO with their vendor and then create another replacement order just to exchange the physical goods, there is no cost incurred for the replacement.
    The thing is if we handle such scenario with one return PO + new PO, there would definitely by financial impact as in invoice creation, LIV, etc.
    Therefore, would like to see if there is any SAP best practice / standard functions that we can make use of.
    Thanks and BR
    Dom

    hi,
    Could anyone please tell me why PO with vendor unknown is needed ?
    > Its mostly required when you wanna raise the procurement in any urgency or if the person entering the PO donot have a right to directly send the PO to the vendor or in case the vendor is required to be decided when the PO is being made...
    And what is the difference between PR and PO with vendor unknown ( If vendor is unknown , to whom should we send the PO then ) ?
    > When you save such PO, it is indirectly saved as PR only(internally), so there is no such difference physically....It not send to any of the vendor untill the PO is entered with the required vendor and send and saved as PO...
    What is the process cycle if we use a PO with vendor unknown . I know the process cycle with Vendor known .
    When you make such PO the system will ask you while saving with the tab " Save as PR" or PO with no vendor defined.....you need to click on it and save the PO as PR...
    Regards
    Priyanka.P

  • PP CS6 on Retina Macbook conflicts with YouTube/Pandora

    I bought my Retina Macbook recently, and the first thing I did was to install Premiere Pro CS6 on it. I did the hack - inserted GeForce GT 650M to the list - and enabled the Mercury Playback Engine.
    Ever since then, I've been having all sorts of problems, but the most annoying problem is that in the midst of editing, somehow Program Monitor would either freeze or black-out.
    I seriously tried every possible ways I could do to resolve this as an average user. I tried resetting the preferences, switching the drives, turning the machine on & off, and all the magic joojoos. None of them worked, until I found out the problem starts to happen as I open other applications along with the Premiere Pro opened.
    I began to wonder, does the graphic card or Premiere Pro CS6 conflict with any programs I have opened? So I tested it out.
    I found out that while having CS6 and Safari (or any kinds of web-browsing programs) on, the "crashes" occur very often. I also found out it typically happens when I turn on Pandora and YouTube.
    The moment I shut off the Pandora tab, YouTube tab, or even websites with any kinds of visual or audio media turned on, the freezing or black-out situation on the Program Monitor immediately stops. If turning off the tabs doesn't work, then quitting the program entirely solves the problem.
    From what I've tested, it's for sure to say Flash or Video Playback on webpages conflicts with GT650M card. It's certainly not the software problem, because when Software Only mode is turned on, all the images come back on the Project Monitor. I mean, what kind of weird conflict is this?
    Can anyone else with a Retina MacBook confirm this?
    In case if Anyone is wondering, this is the setup I've used.
    Retina Display Macbook Pro
    16GB Ram option
    256GB SSD option
    NVidia GT650M 1GB VRAM
    Video files in the SSD

    It's absolutely woeful.
    Like traveling back in time with modern software and putting it on last generation hardware... or two generations previous hardware.
    What floors me the most is that there's not any spikes or even utilisation of the CPU and GPU going on... I have CPU and GPU monitoriing software for the more beserk applications I use.  I checked them out when using Illustrator and Indesign.  The CPU and GPU is hardly getting tickled... so it's JUST poor software engineering at work.  VERY POOR software engineering.
    There's at least 90% of the CPU and GPU power completely unused during moving operations and object creation.  So it COULD be fast, and performant, if they cared to actually use the CPU and/or GPU more effectively/thoroughly when we want to DO something inside the software.
    I don't even know how you'd code something this woefully under performant.  You'd have to plan to do it, or be using MONO or some other uselessly single threaded, low priority frame work...
    Maybe these apps are programmed in Java

Maybe you are looking for

  • Export CLOBs with text into their own file?

    I have a CLOB column in a table. I know it's text (XML Text to be more specific). I want to create a text file for the CLOB contents from each row in the result set of a query and I'd like to name each file based on the value in a different column in

  • How can I get my Music Library on my new laptop?

    The old computer I had iTunes on crashed, and I can't use it anymore. I have purchased a new laptop, and I would like all of my music back. How can I transfer my iTunes music library to my new laptop? I tried to sync my iPhone to my new laptop, but i

  • How do I change the language of products in ITunes Store?

    I speak English living in the Italian part of Switzerland but when I set the country to Switzerland I just get loads of products in German (like audio-books). Does anyone know how to change the language to English, (not the language of itunes itself

  • Upgraded to mavericks and now both email accounts have been merged into one

    just upgraded to mavericks and now both mine and my husbands email accounts have been merged together rather than having separate inbox's.  How do I separate them again?

  • Acquiring database row lock in session bean

    I am getting a "ora-01002 fetch out of sequence" exception when trying to acquire a row lock by doing a select for update nowait sql command. The code that is trying to get the lock is running inside a session bean deployed in both weblogic 6.0 sp2 a