Maintaining Remote key in look up tables for Production data
Hi,
me
SEE in DEV and QA to maintain the Remote key for Look up tables.First i have exported those look up table values and again imported with mapping Remote keys (clone the field and map it to Remote key.). By this i have maintained the Remote keys to all look up tables. Now for Production what should i do. Is it the same process extract all records from production into our desktop and then again import it using IM, clone the field and map it to Remote key.
1. Is this the right process?
2. What happens if there are huge data present in production how to proceed furthr then?
Required your suggestion please.
Thanks,
Pradeep
HI Pradeep,
I dont see any problem with this method if I am getting it right
You are updating remote keys by reimporting lookup data, and this way you have multiple remote keys for data in lookup table,right?
This will help you to automap entries in Import process for different Remote systems.
I did not get your 2nd point?
Thanks,
Ravi
Similar Messages
-
Remote key mapping in Category table
Hi,
We are not able to populate the Remote key in the Category table.
In standard repository the Category table only has one field 'Category Name' which is defined as Display Field.
In order for us to map customer file records which has UNSPSC code with our Category definitions we have added a field 'UNSPSC ID' in the Category table.
As 'Category Name' is the field that should be displayed we need to use the Remote Key function in order to get a unique identifier in the Category table for automatic mapping of supplier records to the Categories in the Category table. However, we are not able to populate the Remote key field in the destination table Categories.
The Category table has 'Key mapping' set to yes and in the Import manager we clone the field 'UNSPSC ID' and map the clone to destination field 'Remote Key'. However, 'Remote Key' does not come up as unique Matching field and performing the Import we can see that the Remote key is blank for all records in the category table.
Does anyone out there know what needs to be done in order to populate the 'Remote Key' in the Category table?
Please note that we are able to map and populate the Remote key field in other tables such as Product Group, Supplier etc but not in the Category table. Is there some special considerations as this is a taxonomy table?
Regards
JanDear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team -
Error while filling set up tables for 2LIS_11 data sources
hello All ,
I tried to fill setup tables for 2LIS_11 data sources in OLI7BW , but the job RMCVENUA is getting cancelled. below is the Job Log ,
Job started
Step 001 started (program RMCVNEUA, variant &0000000000005, )
Start of order processing
Error determining rate: foreign curr. local curr. INR date 10.09.2008 (doc. 1)
Job cancelled
Is there any setting required in R3 side before filling setup tables of SD ?
I am able to fill the setup tables for 2LIS_05 ( Notifications) successfully.
Regards ,
Amol Kulkarni
Edited by: Amol Kulkarni on Dec 4, 2008 3:59 AM
Edited by: Amol Kulkarni on Dec 4, 2008 4:00 AMHi,
one of the sales document currencies is not maintained properly in the system and therefore its failing.
you need to correct those documents before filling the set up tables.
Either you can chose the option fault document toleration limit to 1000...so that 1000 records wrong records can be tolerated or you have to crrect it first before filling up the set up tables.
This will generally happen in test systems.... but very rare in production...so try to maintain currrency again in the system.
generally you will see the sales doc number in the error for which its failing.
May be at the time of filling some óne was working on some sales document and tried it save it.
correct that doc and fill the set up tables again.
Thanks
Ajeet -
Hi all,
please tell me the tables for Credit data.
Thanks,
kishore.1) Check to see if there are any entries in table S066 and S067. These SIS tables hold the credit data for sales order value and delivery order value.
hope it helps -
Hi all,
if you know any tables for contract data(For Contract report),
please tell me.....
Thanks,
kishore.VBAK-contract header
VBAP-contract item
VEDA-changed contracts
KONV-condition records
MARA-material related to contract -
Hi,
Please provide the base tables for Budget data
thankshi Arun,
check these
BPGE (overall budgets),
BPJA (annual budgets) and
BPPE (period budgets). -
Hi,
Any database tables for production orders? please help me.
Thanks & Regards
SanthoshPlz SEARCH in SCN before posting.
You will get lot of posts with tables AFKO,AFPO. -
The table for storing data for infocube and ODS
Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit. -
Method :Want to Use Z-Table for Accessing Data
Dear All,
I am new to BADI. I have implented one HR-PAYROLL Badi.
In this BADI I am having one method . I want to Use One Z-table for accessing data from
that table . Not able define the table in method.
Kindly tell me how to do it .
Thanking you in Advance
SiladityaHello Siladitya
I assume your problem is the definition of an itab for selecting data from your Z-table. In case of classes you have to use table types and workareas, e.g.:
METHOD name_of_interface_method.
DATA:
lt_itab TYPE TABLE OF <name of z-table>,
ls_record TYPE <name of z-table>.
SELECT * FROM <name of z-table> INTO TABLE lt_itab.
LOOP AT lt_itab INTO ls_record.
ENDLOOP.
ENDMETHOD.
Regards
Uwe -
Dynamic Internal Table for reading data from external file
Hello All,
The task was to create a internal table with dynamic columns,
Actually this is my first task in the WebAS 6.20, my program is based on input file provided by user with certain effort. this file can have different effort for a one yr to five year frame..
I needed to read the raw data from file, based on months create a internal table to hold the data, after this i need to validate the data...
I have browsed thru dynamic internal table topic, but couldn't find any dynamic appending structure, the dynamic structure would contains 12 month fileds.
can any one help me in getting my task completed..
Thanks
KumarHi,
I see that you posted the same question a couple of days ago at Dynamic Internal Table for reading data from external file Didn't Charles's response address your problem?
Regards -
System table for Additional Data - Basic data text (MM03)
Hi
How can I get the system table for stroring data in MM03 in "Additional Data" the "basic data text" ?
Thanks in advance.Hi,
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = 'Z610'
LANGUAGE = SY-LANGU
NAME = V_TDNAME
OBJECT = 'VBBK'
ARCHIVE_HANDLE = 0
IMPORTING
HEADER = I_TEXT_HEAD
TABLES
LINES = I_TEXT_LINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8.
Regards,
Bharani -
HI,
what is the table for material data tab in PO?
Regards,Data at item level i.e. may be material data, invoice data is stored in EKPO.
Regards,
Sarang -
Table for Sales datas assinged to Equip/Floc
Hi
I need a table for Sales datas like sales org,distribution channel,divition,sales office,sales group assigned to equipment master,
Points assured
Thanks
Seenuhi seenu
yes you are wright the sales organisation, DC,Divison is strored under the ILOA table only , since in equipment its being picked from the view table,you can interrelate with FL and equipment
regards
thyagarajan -
Object table for production order
Hi all,
I want to create a print program to create a barcode label (sapscript) triggered out of a shop (production) order.
I know for example for deliveries, all delivery data are stored into the NAST table.
Is there a similar table for production order that holds the necessary data?
Thanks
AnneHi,
Tables for production order
AUFK Production order headers
AFIH Maintenance order header
AUFM Goods movement for prod. order
AFKO Order header data PP orders
AFPO Order item
RESB Order component
AFVC Order operations
JEST Object status
AFRU Order completion confirmations
Regards,
Vishal -
Hi Experts,
Can anyone tell me which is the table for Production Order Planned Values.
The one which we get to see in CO02.
Thanks,
RaviHi Ravi,
<b>AFKO</b> Production Order Header
<b>AFPO</b> Production Order Position (details)
Regards
Sudheer
Maybe you are looking for
-
I cannot make these directions work I downloaded media on Overdrive MEdia on my PC I have the overdrive media ap on my I pod touch 4g this media is suppossed to be compatible w/I pd touch Notes on Transferring OverDrive MP3 Audiobooks- Most MP3 capab
-
Can't get all contacts to sync with Outlook 2007,
I've been trying this for a year and I've had no success. This 8900 is my 4th Blackberry. While I've done backups with the others this is the first time I've tried to sync the info. When I first synced I thought everything was OK, but then I noticed
-
Send spool as PDF, error in opening PDF- Could not find the XObject '00014'
Hi I am sendind a spool as PDF and when opening the PDF I am getting error saying Could not find the XObject named 00014. Please let me know how I can see the PDF contents proerly. Regards Bala
-
How to disable CHARGES tab in Find Sevice Requests(CSXSRISR.fmb / CSXSRISV)
could any one please let me know how to disable CHARGES tab in Find Sevice Requests ( CSXSRISR.fmb, but funtion registered is CSXSRISV). Actually when i access the "Create Service Requests" menu option, the form comes up with a the three TABS (Charge
-
I want to cancel the extended iCloud space I just purchased?
I recently purchased extended iCloud space, but I have found it will not do what I want to. I want to cancel the purchase and obtain a refund.