Maintaining Status

Hi,
While am maintaining status, there are some default function keys assigned like F2, F9, SHIFT-F2..
I could not remove the default values assigned to them.. I wud like them to be  empty. How to do that?
Regards,
Kalai

Hi,
Goto SE80, give ur program name ... it consists all the items of the pgm..like includes , FM's, Screens , GUI statuees etc.
click on the GUI status ,  it will show the GUi status . if it is a std GUI then copy it to ZGUI , then go inside that make changes to those function keys & save activate.
Reward Points if it is Useful.
Thanks,
Manjunath MS

Similar Messages

  • Travel Expense Manager (PR05) "Add Data Maintain:Status" upon SAVE

    Hi TM Gurus,
    Good day.
    In PR05,  The"Add Data Maintain: Status" Screen  appears upon saving with the default Settlement Status set to "Open".  Do you happen to know if this default value can be changed via configuration to "To be settled"?   If yes, can you provide steps on how to do this?
    Thank you very much.
    Best regards.

    Customising in TRVPA  via PE03 also should help you achieve this as you have option for "Open" or "To be Settled!
    Entry "WRP" for the SAP EP interface:
    The entry "WRP" allows you to control the dialog for saving a trip. The
    settings apply to the travel services in the SAP EP interface. With some
    statuses, a distinction must be made between the process steps Temporary
    Save and Save and Send.
    Possible values:
    o   0 =  Trip saved temporarily -> "Trip completed" + "Open"
                 Trip saved with "Save and Send" ->  "Trip completed" + "To
         be settled"
    o   1 = Trip saved temporarily -> "Request Entered" + "Open"
                Trip saved with "Save and Send" -> "Request entered" + "To be
         settled"
    o   2 = Trip saved temporarily -> "Request entered" + "Open"
                Trip saved with "Save and Send" -> "Request approved" + "To
         be settled"
    o   3 = Trip saved temporarily -> "Trip completed" + "Open"
               Trip saved with "Save and Send" -> "Trip completed" + "To be
         settled"
    o   4 = Trip saved temporarily -> "Trip completed" + "Open"
                       Trip saved with "Save and Send" -> "Trip approved" +
         "To be settled"
    o   5 =  Trip in the future (end date later than creation date)
                  -> Trip saved temporarily -> "Request entered" + "Open"
                 Trip saved with "Save and Send" -> "Request entered" + "To
         be settled"
                 Trip in the past (end date earlier or same as creation date)
                 -> Trip saved temporarily -> "Trip completed" + "Open"
                 Trip saved with "Save and Send" -> "Trip completed" + "To be
         settled"

  • Travel Expense Manager (PR05): Trigger "Add Data Maintain:Status" upon SAVE

    Hi TM Gurus,
    Good day.
    The "Add Data Maintain: Status" Screen can be manually accessed by clicking the "Trip Status" Button in PR05.
    Can you kindly confirm if it's possible to automatically trigger the "Add Data Maintain:Status"  Screen via configuration when clicking the save button in Transaction PR05 - Travel Expense Manager?
    Thank you very much.
    Best regards.
    Rainnier

    Hi Sally,
    Good day.
    I will now tagged this as answered.  Thanks again for your help on this.
    On the other hand, I have another question:  The"Add Data Maintain: Status" Screen now appears but with the default Settlement Status is "Open".  Do you happen to know if this can be changed via configuration to "To be settled"? 
    Can you please answer this ar this link: Travel Expense Manager (PR05) "Add Data Maintain:Status" upon SAVE
    Thank you very much.

  • Trans. PR05: Automatic trigger the "Add Data Maintain:Status" upon SAVE

    Hi ABAO Gurus,
    Good day.
    The "Add Data Maintain: Status" Screen can be manually accessed by clicking the "Trip Status" Button in PR05.
    Can you kindly confirm if it's possible to automatically trigger the "Add Data Maintain:Status" Screen via code dev when clicking the save button in Transaction PR05 - Travel Expense Manager?   Can you please provide steps on how to do this?
    Can exits EXIT_SAPMP56T_002 or EXIT_SAPMP56T_003 be used for this?
    Thank you very much.
    Best regards.
    Rainnier

    this will be done via config

  • How to maintain Status at the line item level

    Hi Folks,
    How to maintain the status at the line item level. I could able to find the path in the IMG for Header level. I will be looking forward for the path or the procedure for maintaining the status at the Line item level. Do the needful. Thank you.
    Regards,
    Amrita

    Hi Amrita,
    Goto SPRO>Customer Relationship Management>Transactions>Basic Settings>Define Item Categories, Select your Item category and click on Details. Witin profiles set type Assign Status profile you created against field Status profile.
    Hope this helps.
    Regards,
    Chandrakant

  • Requirement for maintaining status "completed"

    Dear All,
    We have following requirement:
    1) We do not want the message processor to "close" the support desk message.
        we maintain the staus schema as SLFN001 with "completed" as one of message status.
        We want that message processor should not assign the status "completed" to the message.
        Only project managers can close the message or assign status "completed" to the message.
    How to do this?
    Which role or authorisation object or user exit supprts this?
    Best regards
    Nil

    Hi
    Your requirement can be accomplished by maintaining appropriate authorization objects for the message processor
    Maintain the Authorization key of the status "completed" in the following object B_USERSTAT , B_USERST_T in the project manager's role and remove from messge processor role.
    For further clarifications revert back
    Regards
    Naveen

  • Customizing for WIP calculation: maintain status DLV and TECO

    Hi Team,
    I m a getting the above error while doing the WIP Calaculation .
    I am going to the transaction OKGC for maitaining the new valutions methods for controlling area  there . system is not allowing to enter the new value.
    Could you plaese help me out how to maitaint the new values in OKGC transaction.Let me know is there any prerequsite for mataintain new values.
    Regards
    sailendra
    Edited by: sailendra mulagada on Jun 26, 2009 2:39 PM

    Hi,
    System will allow you enter the new WIP Valuation method in OKGC
    First system will ask whether the WIP Valuation is based on Actual costs or Target cost.
    Select as per your requirement default will be Actual costs , then enter the RA Key .
    System will copy all the Status DLV, TECO, REL, PREL for that Controlling area & RA Key.
    rgds
    gsc

  • How to Maintain Reasons for the Opportunity Status in SPRO

    Dear all,
    I want to maintain reasons for the opportunity status. could any of you educate me about this. Your help will be highly rewarded.
    thank you
    Raghu ram

    hi Raja ram,
    u can maintain status reasons for Opportunity SPRO
    CRM-TransactionsSettings for Opportunity--Maintain Status Reason and Status Profile for Opportunities
    in this u need to select cataloge type (O1) in this u can maintain reasons for status
    Regards
    sreedhar

  • How to assign status profile to components in service order

    Hi,
    For my business requirement, I want to assign status to individual components planned in the service order. Even though there is a status button on the component tab, there is no config where I can assign the status profile. We can only assign status profile to the order header and the operations and not to components level.
    As SAP has provided the status button in the component tab, I am hoping that there is a way to assign the status to the parts planned.
    Your help is much appreciated.
    Regards,
    Ram.

    hi all,
    It will be helpful if you give any useful tips on maintaining status for the component level in the service order.
    regards,
    ram.

  • OSS Note 1401249 - Issue in GUI status

    Hi ,
    As per 1401249 Note instructions, i need to add a new push button 'Display Income Levy Data',  in the standard report HIECILC0 .
    In SE41 , I am giving the program name HIECILC0 and Status 'ALV', when I click on Change button,  I see 'Modify Status ALV in program HIECILC0' , where as in the Note instructions screen shot it is given as  'Maintain Status ALV in program HIECILC0'.
    Have anyone faced this issue before, why is it 'Modify Status ALV in program HIECILC0' instead of 'Maintain Status ALV in program HIECILC0'.
    I am not able follow the same steps given in the Note instruction because of this issue.
    Please let me know how to proceed with this.

    Hi ,
    The  below thread resolved the issue.
    Can't modify a gui Status
    In SE41 Menu path: Edit -> Modification Operations -> Swich off assistant
    Thanks

  • Settlement of WBS with Partially Released status

    Hi colleagues,
    We are encountering problems during our settlement to AUC. Although the settlement rule is maintained, the system does not allow us to post the settlement to a WBS with "PREL" (partially released) status. Is this really the standard of the system? When can we release the WBS?
    Thank you.

    Ask your FICO consultants to create a separate Asset class for AUCs.
    They can maintain such class in OAOA, where ask them to maintain status of Auc as Investment Measure.
    Now you can use this class in OITA - Investment Profile.
    And assign this Investment Profile to Project Profile in OPSA.
    Assign this Profile to capital project.
    Now all your assets which are AUC stage will come to this asset class.
    You can create completed asset in the other class by full settlement.
    Rewards for helpful answer.
    Thanks,
    RIYA

  • Opportunity Status Reason

    Hi Experts,
    My client would like the possibility to choose several reasons for an opportunity status.
    e.g. : Status : Won
             Reasons : Price
                              Right Ressources
    Do you know how to do this (if it's possible) ?
    Thanks a lot,
    Benoî

    Hi ,
    You can configure a set of reasons for each status in transactions using Status Reasons and Status Profiles.
    In case of opportunties you can go to -
    IMG -> CRM -> Transactions -> Settings for Opportunties -> Maintain Status Reason and Status Profile for Opportunities
    Here you can create your code groups . codes , code group profile and subject profile .Use the catalog - 01 / 02 for Opportunity Status reasons.
    Finally configure Assign Status Profile and Subject Profile to Business Transaction Type . You can set whether giving a reason for a particular status is mandartory or not also.
    This should work .

  • Bapi or FM for insertion of status for PS project

    Hi,
    Is there any FM or BAPI through which we can insert status into Projects. in project defination (CJ01) or (CJ02) in basic data tab there is field system status. in front of this field there is push button for maintaining status of project. Where we can select status profile and status required.
    I need some FM to insert status to created projects.
    THanks.

    BAPI-step by step procedure
    http://www.sapgenie.com/abap/bapi/example.htm
    list of all BAPI's
    http://www.planetsap.com/LIST_ALL_BAPIs.htm

  • Status Profile - Restrict any changes made in sales document

    Hi SD Guru's
    I have a situation here. I have maintained status profile with one of the status as "REJ - Reject Sales Order". Now when i set that status "REJ" and save the order, and open it by transaction VA02, i can make any changes in the order document such as adding new line item. I want to restrict any changes for this order now. How can i tackle this situation. Can you please help me with the same, its urgent.
    Regards
    Ravi

    Dear Ravi
    This can be controlled in two ways.
    1)  Through User Exit : MV45AFZZ by not allowing the specific users to make changes
    2)   With the help of your Basis Team, authorization of VA02 should not be allowed for the said users.
    Thanks
    G. Lakshmipathi

  • Deactivate idoc generation for order when status is not completed

    Hi Guru,
                 In CRMD_ORDER when sales order is created it will generate bdoc and for that bdoc idoc is going to create for every status , my requirement is to stop the creation of idoc if status is not completed please provide solution for that.
    Regards,
    Naveen.

    Hi Naveen,
    As u said u dont want to create idoc on the particular User status(i.e. Not Completed ), in this case u check for u r subcription setting in administration console (txn: SMOEAC) that in which statuses u r idoc get created in field crieteria value, maintain status operator (NE) Not Equal to Not Completed , u r idoc will not get created if u r user status in Not Completed
    Regards,
    DD's

Maybe you are looking for