Maintaining Text Formatting from Indesign CS4 to Illustrator CS4

Hey folks,
I'm trying to transfer copy a section of text with bullets from InDesign CS4 back into Illustrator CS4.  When I copy it over to Illustrator, I lose my bullets.  I know I could do this in CS3 and maintain the bullets, but the approach I used in CS3 doesn't work for CS4.
Anyone know how to pull this off without me having to go into Illustrator and kluge together some bullets from scratch?
Thanks!
-Dusty.

Thanks for the response Bob.
How do I convert my Indesign bullets to text, or are you saying I need to create them as Wingdings or somesuch and not as actual bullets?
The bullets are the main issue, but my formatted text isn't transferring either.  The text I paste from Indesign to Illustrator removes the formatting I had in Indesign (e.g., font-family, size, etc.)
Thanks,
-Dusty.

Similar Messages

  • Migrating text formatting from InDesign CC to Flash CC

    Since TLF is no longer supported in Flash CC, does that mean that maintaining the integrity of the type from an InDesign layout to Flash is no longer possible? Is there a possible work around?
    I'm designing content for interactive labels for a museum exhibit in InDesign and having trouble migrating the text formatting to the interactive programmer who is using Flash. We tried all the options in the export to FLA dialoge and each time the text either turns out wonky or gets rasterized. The text needs to remain editable, so the rasterization will not do.
    I know a little bit about Flash, so I can possibily go into her file and make adjustments as needed without having to hang over her shoulder as she makes the edits. Is it possible to use the Creative Cloud Files section for collaboration like is possible in Google Docs, where the changes are live and there is no need for mutiple files.

    I've noticed that if you export as TLF and let FlashCC make the conversion back to classic the results are a bit better—at least multiline text doesn't get chopped up. I think you will have to make adjustments in Flash. You want to avoid justified text because there's no hyphenation. Flash doesn't have any justification preferences, so you have to avoid subtle typography.
    Is it possible to use the Creative Cloud Files section
    You should be able to if the programmer has a CC subscription, or you could do it with DropBox.

  • New problem printing from InDesign CS4 in Lion

    After having great success with Aisolve's earlier fix on printing from InDesign CS4 after upgrading to Lion, I'm having a new problems after installing the OS X 10.7.2 upgrade last week. When I try to print from  InDesign CS4 and Illustrator CS4 to my Lanier 445c/Ricoh C4500 at my workplace I get the following error message:
    "Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem."
    This seems like a different issue this time, as I'm able to print to my home printers, an HP LasertJet 2600n and an HP Photosmart C4270. I thought it might be a printer driver problems, but I've gone to Lanier's site and they don't have any new printer drivers for Mac OS X 10.7.
    I also some research on Adobe's site, and found this message affecting CS1, 2 & 3. I tried the only fix that seemed to apply to me, which was re-naming/deleting the InDesign Deafults and InDesign SavedData files. (I have this problems even when I'm printing a text-only file without any graphics.) This fix didn't work.
    I can print to the Lanier/Ricoh from Acrobat 9, and all my non-Adobe software just fine, so my work-around to date has been exporting to PDF and printing from there. My big problem is that I need the "Print Booklet" feature in InDesign for a big job I've got coming up this week. Can't do that from Acrobat. :-(
    Any help would be greatly appreciated!

    mmsteer,
    I think I may be able to help you with this problem, which I was having with CS4 when I first upgraded to Lion, and others were having with CS3. This fix is courtesy of Aisolve on these discussion boards:
    Remove the Adobe PDF PPDs from the following folders:
    OS/Library/Printers/PPDs/contents/Resources/en.lproj,
    OS/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj,
    OS/Library/Printers/PPDs/contents/Resources/Ja.lproj,
    OS/Library/Printers/PPDs/contents/Resources/ko.lproj,
    OS/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj,
    Be sure to go to your system Library, not your user Library.
    Also, regarding my current problem, I spoke with an Apple tech person and found that the 10.7.2 upgrade apparently is the culprit, and is incompatible with wireless printing to my Lanier printer. I CAN print connected through USB. That's a work-around for now, but I'll need to contact Lanier about upgrading their driver for OS X 10.7.2.
    Aisolve was helping me with this issue, too, and assures me that if I'm able to generate a postscript file (which I was), and able to generate a PDF by distlling it through Adobe Distiller (which I am), then I can safely assume that the problem lies with the hardware, in this case the printer driver. This lines up with what Apple told me.

  • How to create a smallest file size pdf from indesign CS4 document

    How to create a smallest file size pdf (suitable for upload to a website) from indesign CS4 document which contains multiple illustrator CS4 illustrations.
    I have chosen the "smallest file size option" but the pdf file is over 30MB, can anyone help please.
    Thank you

    One trick is to
    Set the placed graphics to have a transparency of 99.9% (you can do this with Find/Change and select Objects)
    This is enough to force the graphics throught the Transparency Flattener
    Next set the Transparency Blend Space to RGB (Edit>Transparency Blend Space)
    Next set a custom Transparency Flattner Preset Edit>Transparency Flattner
    Next
    Use File>Export and choose
    Smallest file size
    PDF Compatibility Acrobat 4 (PDF 1.3)
    In Advanced Section - go to transparency and selec the new Flattener Preset you created.
    *this will convert your vectors to raster, but it should reduce your file size

  • Copy and paste from InDesign CS2 to Illustrator CS3

    Hi,
    I'm a Mac Illustrator CS3 user and having trouble copying text from InDesign CS2 to Illustrator CS3.
    After copy text from InDesign (allowed), I'll go to Illustrator to paste it, but none of the text appear. I'm not sure if there any other step should I take before paste?
    Any help are much appreciated.
    Tq

    I can't find Clipboard Preferences in either InDesign or Illustrator. Help me.
    I'm using Mac Illustrator CS3.
    TQ

  • Issue in PDF export from InDesign CS4

    Hi,
    We are facing one issue while creating  PDF file from the InDesign document. The document has 2-column texts created in InDesign CS4 application.
    The issue is, we export the PDF from InDesign document. When we open the PDF in Acrobat and selecting the text (using selection tool), the second column text is selected first and then it selects the first column text. So while copying the content from the PDF, it comes is reverse order (that is Second column text, then first column text).
    Could anyone suggest me how to solve this issues.  Is this bug in ID CS4?
    Thanks,
    Gopal

    Hi Uwe,
    Below is the answer to your question.
    Question: Did you set the "TouchUp Reading Order" in the preferences of your Acrobat other than "Left to Right, Top to Bottom"?
    Answer: No, we did not change the Touchup Reader order. It is in "Left to Right, Top to Bottom"
    Question: What version of Acrobat Pro are you using? Or is it just Adobe Reader?
    Answer: We are using Adobe Acrobat 9 Pro version. We tested in Adobe reader X (VER 10.1.3). But the same problem exists.
    Question: What kind of tool are you using? it the "TouchUp Text Tool"? Or is it the "Select Tool"?
    Answer: We used both Select Tool and TouchUp Text Tool. Both selects the text in reverse order. (that is right column to Left column)
    Please help me on this issue.
    Thanks,
    Gopal

  • How to strip text formatting from text field value ??

    Hi everyone,
    Have tried to get some info on this but no luck.... I've
    created a simple contact form in Flash, but the URL which it's
    generating contains the text formatting from the text input fields.
    As a result the script that processes the mail send doesn't work.
    How do I strip the text formatting out of text1, text2 and text3
    before I use getURL() ??
    on (release) {
    url_var =
    "your_name="+text1+"&your_e-mail="+text2+"&message="+text3;
    getURL("contact.php?"+url_var, "_blank", "GET");
    text1 = "";
    text2 = "";
    text3 = "";
    }

    text1.text = "";
    text2.text = "";
    text3.text = "";
    …that should strip the textfields. You probably also
    want to add this property (text) in the getURL()

  • Cannot print to Adobe PDF from InDesign CS4 under Snow Leopard (10.6.2)

    Hello All,
    Hopefully the subject line says all. Running SL and CS4, and after manually deleting the "old" Adobe PDF 9.0 driver, I am unable to print to PDF — or select "Save As Adobe PDF" under the Mac OS print dialog. This is insanely frustrating on may levels, as this was once a 3-minute operation and now has stretched into two days of futile searching for a solution.
    There is a "tech doc" somewhere out there that offers a "solution". But beware, as it has not worked for me. Once you manually search for and remove the Adobe PDF 9.0 driver, you are supposed to magically be able to select the "Save As Adobe PDF" option. This is not the case for me.
    Am trying to print, once again, from InDesign CS4 (NOT via the Export command as that will not allow me to set page size, or print separations). There is no Adobe PDF driver there anymore and there is no option to print PDFs. Of course, I can rest easier with the knowledge that everything is easier now in SL.

    For a long time I was printing out of InDesign CS4 to a PS file and Distilling to a PDF, either composite or separated. Then Snow Leopard came along and that workflow seemed no longer available. It seems some well meaning people didn't understand a professional DTP workflow.
    I had to work between two Macs to create a project and then make separations.
    Eventually I went back to the Adobe InDesign forums and folks insisted that a Adobe PDF 9 printer should be available in my print drivers.
    On that suggestion I completely uninstalled Adobe Acrobat Pro 9 and then reinstalled it.
    It worked, I had the PDF printer back and can now print to a postscript file and do separations as I always have.
    (Another story is that Snow Leopard killed my Epson 2200 printer)
    At one stage I did an update of Acrobat 9 and it caused me to lose the Adobe printer again. Going through the procedure again brought it back and this time after a Acrobat 9 update it stuck.
    In my opinion somebody screwed up. It's not enough to be able to create PDFs out of Microsoft Word. There are people out here trying to make a living and need to be able to create print separations for some offset printers.

  • I'm attempting to create a pdf from InDesign and the Illustrator image does not appear properly.

    I'm attempting to create a pdf from InDesign and the Illustrator logo does not appear properly. The logo has a light blue color background with a black to white gradiant over it with a multiply designation set at 100%.  I flattened the logo in illustrator before importing into InDesign. When the pdf is created, the blue background of the logo drops out and the only thing showing is the graduated screen of black. PLEASE HELP!!!!!!

    Thanks for your reply Peter,
    I'm on Mac OSX (10.5.8) using Acrobat 7 Professional and Acrobat 
    Reader 9 to view the pdf. I created it by exporting. Attached is a 
    screen capture of the letterhead. Since I posted, I sent a test pdf to 
    my partner's computer eventhough it didn't look right on my system and 
    she said it looked fine to her. I've restarted my computer and tried 
    again and still get the same results.
    Thanks for your help,
    Pat Boullion
    Boullion Graphics
    281 444-5749
    Fax: 281 444-6507
    CONFIDENTIALITY NOTICE
    The information in this email may be confidential and/or privileged. 
    This email is intended to be reviewed by only the individual or 
    organization named above.
    If you are not the intended recipient or an authorized representative 
    of the intended recipient, you are hereby notified that any review, 
    dissemination or copying of this email and its attachments, if any, or 
    the information contained herein is prohibited. If you have received 
    this email in error, please immediately notify the sender by return 
    email and delete this email from your system.

  • Can you have a PDF fit on the viewer's screen automatically when exporting from InDesign CS4?

    Can you have a PDF fit on the viewer's screen automatically when exporting from InDesign CS4?

    If you were to upgrade to InDesign CS5 or CS5.5 and if you exported as Adobe PDF (Interactive), you could set the View settings for Page Layout and Zoom.
    While, as Jongware points out, its possible for individual users to override that option (Preferences > Page Display > Default Layout and Zoom), the number who will actually do that is actually very tiny.

  • Scaling issue when printing to HP devices from InDesign CS4

    I seem to have a recurring error printing from InDesign CS4 (OS X Leopard 10.5.8) to both my HP printers (C3180 & Officejet Pro 8500). When printing at 100% size, the artwork gets scaled up slightly. For example, creating a simple 5 x 5" box ends up coming out at 5.125 x 5.125" on the printed sheet (with no scaling turned on in the print dialogue).
    I've not been able to find any support issues related to this on either HP or Adobe's site. I suspect it's s driver/postscript incompatability issue. The same artwork prints at the correct size when exporting to PDF and printing from Acrobat.
    Curious if anyone else is experiencing the same problem.

    A large percentage of problems we see related to printing seem to be with HP printers. Are you doing borderless or anything like that? What is the page size and scaling in the driver?

  • Exporting JPEGs from InDesign CS4

    I've exported jpegs from InDesign CS4 for years and each time I get an Export JPEG dialog box that gives me the option to adjust the resolution. Suddenly, when I export to JPEG, I get no dialog box and it automatically creates a JPEG at 300 dpi. I've looked everywhere in Preferences to see if I inadvertently changed settings, but I find nothing. Help?

    Try this forums.adobe.com/thread/526990

  • Upgrading from InDesign CS4 to CS5.5

    How much would it cost to upgrade from InDesign CS4 to CS5.5

    There is no longer any official upgrade for any version of InDesign. The only offerings from Adobe now are Creative Cloud subscriptions (which currently provide access to both CC and CS6 versions), or purchasing a perpetual license for CS6, at full price, with the understanding that CS6 is considered "feature complete" and will not receive any further updates and may not work on the next OS releases or new generations of hardware.

  • Transferred CS4 to new MacBook Pro, now some fonts will not work when PDFing documents from InDesign CS4. Help!

    I recently purchased a new MacBook Pro. I transferred my CS4 from my older MacBook Pro to my new computer, and although it seemed to be working fine now some fonts will not work when PDFing documents from InDesign CS4. These fonts are installed on my new computer, can be found in InDesign CS4, and work fine within the program but will not appear in PDFs. The letters turn into rectangles. Does anyone know why, and how to fix that?
    Help/input would be much appreciated. Thank you!
    Kristen.

    you should properly install adobe products, not move, migrate or otherwise transfer them.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • How to keep text formatting from a php flatplan to Indesign

    Hi forum users
    my question is this:
    My company uses a PHP flatplan to recive and store work ready for the deisgners to place in indesign, however any text formatting ie bold, italics etc when copied from the flatplan dont keep when pasted into indesign, im just wondering if there is a way to keep the formatting if anyone knows.
    Currently using Indesign 5.5 but wondering if Indesign 6 has any fixes for this etc
    many thanks

    It may not work for PHP, but there is an option in the prefs to include all information, or text only, when pasting from external applications.

Maybe you are looking for