Maintanance of category data in R/3 for SRM

Hi Gurus I am getting the message below , where in R/3 can I maintain the settypes for product categories( material groups) ?
*You can only change the category data in the original system RFD100*
*Message no. COM_PRCAT010*
*Diagnosis*
*This category has been imported from another logical system. To ensure data consistency in the different systems, the category data may be changed only in the original system. However, further set types may be assigned to the category.*
*Procedure*
*Change the category data in the original system and reimport the data.*

Hi,
If you post this issue to SRM thread, you can get good answer, still i will give some idea.
In SRM, Product is equal to material group in R/3 system (Back end system). You can import the data from Back end system to SRM or vise versa depending on your logical systems definition. You may miss some config setting.
Subrahmanyam

Similar Messages

Category mainatanance in R/3 for SRM

Hi Gurus I am getting the message below , where in R/3 can I maintain the settypes for product categories( material groups) ?
*You can only change the category data in the original system RFD100*
*Message no. COM_PRCAT010*
*Diagnosis*
*This category has been imported from another logical system. To ensure data consistency in the different systems, the category data may be changed only in the original system. However, further set types may be assigned to the category.*
*Procedure*
*Change the category data in the original system and reimport the data.*

Hi,
If you post this issue to SRM thread, you can get good answer, still i will give some idea.
In SRM, Product is equal to material group in R/3 system (Back end system). You can import the data from Back end system to SRM or vise versa depending on your logical systems definition. You may miss some config setting.
Subrahmanyam

Error while reading access data (URL, user,password) for the Adapter Engine

Hi,
Any idea on below message? I am doing file to file scenario and got the below tarce from sxmb_moni.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.pi1.piserver1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.pi1.piserver1</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.pi1.piserver1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
Balaji

It looks like the adapter engine is not able to register him self on SLD, you have to check in the SLD the "Exchange Infrastructure" domain, you have to verify restarting the J2EE the adapter engine update the entries in the SLD related to the specific XI Domain.
Launch Visual Administrator >> Server >> Services >> SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Sandro

Error when reading the access data(URL,user, password) for Adapter Engine

Hi,
We are getting this error in production system
"SXMBSysErrorAlerts, Category INTERNAL, Error code: AE_DETAILS_GET_ERROR error text: Error when reading the access data (URL, user, password) for the Adapter Engine".
Please tell what can be the cause of error. Where are the access data (URL, user, password) for the Adapter Engine read from?
Its urgent. We are in support project.
regards,
john

Hi jhon,
please check the following threads to resolve the problem.
AE_DETAILS_GET_ERROR
Error : no_adapter_engine_found: Unable to find Adapter Engine
regards
mahesh.

Org.data determination is possible for product scenario

org.data determination is possible for based on product scenario in transaction like for BP ? how can we do this? Pls guide me?
Thanking u in advance.

Hi
Marketing Organization
The marketing organization is an attribute of marketing plans and campaigns. It is part of the SAP organizational model that enables you to define how your company structures responsibilities in its marketing activities. You use the marketing organization to map the marketing logical enterprise structure to the organizational units in your company.
The marketing organization has the following attributes:
Product category
Country
Reference currency
You use these attributes to describe the marketing organization. For example, if you base your organizational units on brands, you can use the product category for the brand.
The marketing organization can be completely different from the sales organization or the service organization in CRM.
Marketing organizations are relevant for campaigns and marketing plans only. They are not relevant for trade promotions or deals. Consequently, the Marketing Org. field is available for campaigns and marketing plans only.
You can use the marketing organization attribute for:
Authorization checks
You can use the marketing organization in authorization checks, for example, to determine whether a user is authorized to change a particular campaign.
There are no marketing-specific authorization objects for the marketing organization. You can add authorization checks on the level of the marketing organization by using standard Organizational Management structural authorizations, or authority object PLOG. You can go down to the level of user name to build the authorization environment. To make settings for the structural authorizations, see Customizing for SAP Web Application Server, under Application Server Business Management SAP Business Workflow Authorization Management Structural Authorizations .
Automatic entry and checking of marketing attributes
The system can use the marketing organization for providing default entries to certain fields in Marketing.
Partner determination
For example, you can use the marketing organization to determine the appropriate marketing manager for the assigned marketing organization, and assign it to the campaign (on the Partner assignment block).
Workflow routing
You can assign a marketing organization to a campaign, and then start a workflow based on the attributes of the campaign. For example, you change the status of a campaign with a particular product category to For Approval. The system routs a workflow item to all users who are assigned to a marketing organization with this particular product category.
Cost planning
Cost planning enables you to split key figures across multiple dimensions. For example, you can use the marketing organization to distribute the costs of a campaign across several marketing organizational units.
Reporting
You can use the marketing organization in reporting. For example, you can measure the success of a particular organizational unit.
Regards
Manohar

Availability Date for SRM 7 EhP1

Hi
does aybody have information about release dates of SRM 7 EhP1? Has ramp-up already started? Desperately waiting for some functionality promised with EhP1 like parallel approval for BRF workflow.
Regards
Carsten

Hi carsten
All core applications of SAP BUSINESS SUITE 7 INNOVATIONS 2010 are synchronized on a common release-to-customer date and constitute the stable core.
Enhancement packages deliver continuous innovation for this stable core. SAP BUSINESS SUITE 7 INNOVATIONS 2010 is based on Enhancement Packages for SAP CRM 7.0, SAP ERP 6.0, SAP SRM 7.0 and SAP SCM 7.0.
Key Data
Planned Release to customer: Second Half of December 2010
Planned Completion date Ramp-Up: Q2, 2011
How to apply for Ramp-Up in Q4/2010?
Customers: Please contact the pertaining point of contact below for further information
Learn about the new solutions (using the link to the solution page below)
Get in touch with your Account Executive / Customer Engagement Manager
but SAP has some big plans to satisfy the customers via EHP1
https://websmp107.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000730505&
please contact appropriate region contact manager in the above link.
i could not see any info on product availablibility matrix for EHP1 for SRM
P_SRM_71 - SAP Certified Application Professional - SRM with SAP SRM 7.0 EHP1
Supplier collaboration with Portal, SUS and ROS +
Implementation scenarios, system landscape and combined Business Suite roles +
Self-Service Procurement +
Service Procurement + Plan-Driven Procurement +
Operational sourcing in SRM and ERP +
Catalog Integration and concept in SRM and ERP (SRM-MDM and Punch- Out) +
Strategic Sourcing with SRM and E-Sourcing +
Contract Management in SRM, CLM and E-Sourcing +
Portal Integration +
Master data and product category concept and replication ++ ERP, SCM, PLM and Financials integration including ERP-MM configuration ++
Approval concepts and possibilities with SRM, ERP and SAP NW Portal +
Roles/Authorizations, UI configuration, WebDynpro Basics + and Flexible Deployment Variants "
SRM MDM Catalog +
System communication and ERP integration +
Application Monitoring/Troubleshooting/ Reporting +
User management and organizational structure +
Workflow configuration: Process- & Application Controlled WF +
Muthu

Item category IRIN is not defined for this material

Hi,
When creating Sales Order, I assign a service material with Material Type DIEN , System gives me error as
"Item category IRIN is not defined for this item."
I want to know where and how is the link between Item Category and Material is maintained
Thanks in advance.
Regards,
Nitin

hi
i am not a expert , based on my knowledge system will determine the item category for line item , based on vov4 , here you will give the
sales document typeitem category groupusage+higher level item= default item category
or + leis + sein + enter over item= irin
this is for determination ,
in the material master you will check the item category group , sale view tab 1, 2, and also basic data.
based on this will take , line item , item category . so sales view and basic data view item category group are same , other wise system sows this is error message ,
please check this
regards
sankar

0CO_OM_CCA_4 - Data in r/3 for verification (Transaction or tables in r/3)

Hello I loaded to BI using 0co_om_cca_4 data source. I would like to know how to verify the data in r/3 for this data source? I have seen so many postings regarding this, but was unable to use any of them. Do you know which transaction to use for verifying the data in r/3? Some people listed multiple tables, but I don't know logic the extractor uses for connecting all those tables.
Thanks.

Hi Sam,
for Cost Centers: Statistical Key Figures (0CO_OM_CCA_4) orgin table is COSR.
[http://help.sap.com/saphelp_nw70/helpdata/EN/4d/fcaba947fa5d42b4ef5f7769f87939/frameset.htm]
Regards
Daya Sagar

How to get the data from pcl2 cluster for TCRT table.

Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.Ch

PL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh

When I try to disable cellular data in the settings for my apps it will toggle fine, but once I exit and go back in to the cellular settings its back on again all by itself.

I have had a problem with my iphone 4s for some time now but I have just been so busy to try and fix it. When I try to disable cellular data in the settings for my apps it will toggle fine, but once I exit and go back in to the cellular settings its back on again all by itself. However, even though it says the data is on, I can’t use the data when I don’t have wifi. I tried restoring my phone a few times and the last time I did that, it wouldn’t turn my service on so I had to talk with a Verizon agent for a long time trying to fix it and finally they simply sent me another phone. I thought hey new phone, this part will be fixed. However, I got my service to work but it’s still the same problem with the cellular data. I have just left it alone and not worried about it, but it’s still not fixed and thought I could ask on here if anyone had any ideas. It has something to do with the apps actually installed on the iphone. Apps like the mail, safari, settings, itunes apps, etc. All my other apps turn on and off just fine. Does anyone have any ideas?

Read the User's Guide... it covers how to backup and sync the device as designed.

Report on delivery data in item level for list of po

Dear all
How to take Report on delivery data in item level for list of po
regards
M.Chandra mohan

You can check any of the standard reports like ME2M with the selection variant as "PO where GR exists"

Addition of a Field in EKKO/Data not getting populated for that field

Hi All,
I have added a Z Field in EKKO Table through the Append Structure "CI_EKPODB".
There are around 2000 records in EKKO and for all the records that Z field is Blank.
But, when I write a Select Query in Program to Fetch the Records where that Z Field is BLANK, I get only 50 Records.
The same happens when I Execute SE16 for EKKO by giving condition Z Field = INITIAL. I get only 50 records in the output.
Please help me understand why I dont get all the Records where that Z Field is INITIAL?
Is any customization required or is this a Technical Issue?
Please help.
Thanks in Advance.

hi rohan,
if you are adding a field in a table by append structure then make that field as ZZ instead of Z to differentiate it from normal fields.
now when you have created the field in a append structure then if have not checked the initial flag.thats why u are getting this data inconsistency.
this is because earlier 2000 entries are prestent in the table , now when you add another field in the table then that field will not have value for those 2000 records.
now when you create the fiels select the init flag field,if you select this then new flag field will NOT NULL,so initial values will be filled for that field for existing 2000 records.
Note : NULL and INITIAL are different things, NULL means not defined and initial means which is having its initial value.
check that init flag and u will get those 2000 records, you are getting inconsistent data now becuse value for that field is null ie not defined.
hopr this will solve ur post and u wil get the concept of append structure.
Thanks and regards,
Tanmaya

HT1349 hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help

hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help

Hi.
I had a similar problem myself. This is what helped me.
I went to the App store app, scrolled to the bottom, logged out of the account, re logged in with my Apple ID. Then went back to app updates. Once I put in my ID password all was fine.

Is there a way to turn off the message alert "Cellular data is turned off for _____"?

I turned off cellular data for about half of my apps so I don't go over my data limit (Thanks AT&T). Now every time I open these apps a message alert pops up saying "Cellular Data is Turned Off for _____. You can turn on cellular data for this app in Settings" And it gives two buttons, "Settings" and "Ok".
If it were only a few times, I wouldn't care about closing this message. But now that I have to do it like 20-30 times a day, it has become SUPER ANNOYING. Seriously Apple, how do I turn your stupid message off??? I TURNED OFF MY CELLULAR DATA FOR A REASON, please stop reminding me of what I already know.
AND the worst part is, when that message pops up it locks the phone so the home button doesn't work. Pretty lame software feature in my opinion.

There is a fix for this! I was about to jailbreak my phone to cure this issue, but found the answer on another thread.
Go to settings/notification center. Select the app in question and turn the slider for "allow notifications" to ON. Turn off the sliders below for sounds, etc. Now it shows up in the notification center separately (or seemingly not at all) and not on your screen when you switch to the app. Good luck!

I cannot log in my game center using a same nickname after i updated my phone to ios 7. All my game data i was playing for months is lost. Seems when i try to put my nickname its already in used. How can i recover all my game data back?

All my game data i was playing for months was lost. Seems when i trie to put my nickname its already in used. So i need to put a new nickname then it create a whole new acc for me. All my previous data was lost. How can i recover my all my data or use my old nickname? Pls help

kerryp123
Yes, it is the same with me. I know a friend how upgraded to iso7 and lost all of his game center data. He tried singning in and re singning in but no change. Plus on to of all of this, apple is like have me and him to re-validate our itunes acount. Somthing weried is going on. So verified my itunes acount and it shows under settings that I am signed in, but when I go to the app store on my iPhone and try downloading or even updating a app, it says "can not conect to itunes store" after singing in! AND I'M NOT SURE I AM GOING TO UPGRADE TO ISO7 YET UNTILL THEY FIX THIS BUG!!!! HELP!

Maintanance of category data in R/3 for SRM

Similar Messages

Maybe you are looking for