Maintanance option at LBWE

Hi Gurus,
can we move the standard extract structure fields to the POOL in the maintanance option of the data source in LBWE Tcode
if not how to avoid those fields as we are getting error while activating the data source because of those fields
Plese help me
Thank you

Hi,
First check the Connections.. then
1. Delete Queues in SMQ1/LBWQ and RSA7.
2. If it is connected to BW server then better run delta it will clear Q in RSA7 (First step is enough)
Then goto LBWE and move POOL fields and save/activate it.
Thanks
Reddy

Similar Messages

Add field from structure maintanace option for datasource in LBWE (BI 7)

Hi,
while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
but when we try to add extra field not by structure maintanace option in LBWE but form append structure option from that structure MC02M_0ITM ( that field is not in that maintanace option in LBWE) than it comes in that structure MC02M_0ITM and also can see in RSA2.
Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
Best regards,
dushyant.

It solved automaticaly,
yes later i got that error entry still exit whic solved by deleting setup table and than try,
thanks.
one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
Best Regards,
dushyant.

How to create a callback function module

Hi all,
I am working in a requirement where we need to call a function module at a 'after change' event. So how to create a callback function module and register it with the crmvevent ?_
I created a sample function module and try to create entries in table crmv_event_cust, but i got an error message saying that the function module name I provided is not in table CRMC_FUNC_ASSIGN. When I try to create entry there, I got a message that function module is not in CRMC_OBJ_FUNC and that table is a standard table with no maintanance options !!
looks like i am going in wrong way ... can any one please help ??

Looking at my system all you need to do is create the entry for the callback function in maint view: CRMV_FUNC_ASSIGN.
Your entry should be as simple as Z-function name Object Function - <same as others in the segment you are assigning>
IE for the partner it would be CRM_PARTNER as object function, for general order processing CRM_ORDER
Take care,
Stephen

Windows 8 wakes up from hibernation on its own

Hello guys,
I recently updated to Windows 8. I've found that everytime I hibernate my PC it will automatically wake up on it's own at random times.
I had this issue with Windows 7 and fixed it by disabling wake armed peripherals. I've done this in Windows 8 with no luck.
I checked the automatic maintanance option and that is also disabled from waking up my PC.
I have no idea what else to do. The powercfg -lastwake command shows me no devices, it only says:
Wake History Count - 1
Wake History [0]
Wake Source Count - 0
Any ideas on what the issue could be or where I could start looking?

I have that exact problem as well unfortunately the "powercfg
-devicequery wake_armed" is largely useless as it is showing only USB mouse and keyboard to be able to wake the computer up and I know nobody touched it in the period when the computer decided to wake up by itself.
Additionally when I physically disconnect the network cable then the computer does NOT wake up by itself anymore. But I already disabled my network card from being able to wake up my computer - why is it waking up with the network cable in? And more
importantly - how can I stop this from happening?
Today I noticed the computer got woken up and immediately clientwindowsupdate program installed some updates. But I have configured the windows update to NOT wake up my computer..

Cant add field from structure maintanace option for datasource(LBWE BI 7)

Hi,
while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
but when we try to add extra field other than with that structure maintanace form append structure option from that structure MC02M_0ITM than it comes in that structure MC02M_0ITM and also can see in RSA2.
Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
Best regards,
dushyant.

It solved automaticaly,
yes later i got that error entry still exit whic solved by deleting setup table and than try,
thanks.
one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
Best Regards,
dushyant.

Which option to use to search text in multiple table columns

Hi, I have a case where I have 4 db tables. On the UI there is an option to search a keyword from some columns of these 4 tables.
Table1 = summary, description are the columns user can search on
Table2 = project_name is the column user can search on
Table3 = need_by_date is the column user can search on
Table4 = owner is the column user can search on
On the UI, user can enter a keyword and check the columns they want to search on. Out of the above, they can check one column, or more, or all.
My question is what is the best option to use oracle text search in this case.
Option 1 = I create a procedure to select these columns and then create an index on this procedure. In this case, is there a way to specify
which columns to search on?
Option 2= Create 4 separate indexes on these table/columns and then query the columns which user has selected to search on.
Any other better idea?

Hi,
multicolumn only works on columns in the same table.
If you can also query just on one field, then an index per field will be preferable. If you query always on all the fields then the one index approach is good. For this last the options are:
1. Use User_datastore, create a procedure and a dummy column
2. Create a materialized view for the query and build an index on this materialized view
3. Store the fields as an xml in the main table and index the xml column.
The maintanance of options 1 and 3 are bigger, because you need triggers to be aware of an update. Option 2 and 3 will need more storage.
Herald ten Dam
http://htendam.wordpress.com

Fields Missing In Maintenance TAB of LBWE

Hi Friends,
               I have appended the data source 2lis_02_scl , I see my fields in the data source in rsa6, but in LBWE, in the maintenance TAB, when I try to pull my fields from Right to Left , I dont see my fields on Right hand side, Please clarify this, and also my question is do I have to write my CMOD and then pull the fields on Maintenance TAB??
Thanks and Early response will be appreciated.

You cannot see the enhanced/appended zfiled in LBWE. You have to write code to ppopulate data to that filed.
Follow the below steps:
1)Go to RSA6 and find the data source you need to enhance.--> Display
2)Double click on the Extract structure.
3)Now click on the append structure button to add the required field on to the existing structure.
4) add your required fields with ZZ appended to your field.
5) Save & Activate the append structure. Then go back and make sure you activate the extract structure also.
6) Now again go back to RSA6 and select your Data Source. But this time go to change Data Source to remove the hide option to the enhanced fields. By default theyll be in hide mode. If you dont remove the hide field then this field will not be seen in BW side.
7) Now go to SE38 to write the logic to populate the data into the enhanced field. Program name to write the logic is ZXRSAU01.
8) Check + Save + Activate.
9) Check in RSA3 if data is populated as per your requirement.
10) Replicate your Data Source.
11) Now go to Data Source/ Trans. Structure screen. Now you can see the enhanced field on the right hand side.
Enhancements:
BW Side:
Go to CMOD.
1.     To create new projectgive the project name create give Description  Save
2.     Select the radio button Enhancement Assignment and give the Enhancement name you want and press Enter.
3.     If the Enhancement is already assigned to some other project it will display the same message saying it is already assigned it some other project.
4.     If the Enhancement is not assigned to any project Click on save.
5.     Give RSR00001 (For Variable Exits)
6.     Activate the Project.
7.     Now go to Display  and click on the components button.
8.     Now Double click on EXIT_SAPLRRS0_001. In that you can see an include ZXRSRU01.
9.     Double click on that include, it will say program name ZX are reserved for includes of exit Functions groups.
10.     Just Press Enter.
11.     Itll Pop-Up a window saying Include ZX. Does not exits  Create Object.
12.     That is where you have to write the code for the variable exits.
13.     RSR00002  BW: Virtual Chars and Key Figures.
14.     RSR00003  BW: Moving Characteristics.
R/3 Side:
Follow the above steps and the enhancement will be RSAP0001:
1.     ZXRSAU01  Transaction Data
2.     ZXRSAU02  Master Data (ATTR).
3.     ZXRSAU03  Master Data (TEXT).
4.     ZXRSAU04  Hierarchies.
Also check the below links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
also please see these threads
Enhancements
Re: enhancements
Good Luck

Fields missing in LBWE

Hi folks,
We got a an issue with the fields of standard LO DataSources.
When i have checked the LO SD datasources in LBWE maintanance, few fields are not existing in our Production system which are available in DEV server.
But i can see the total number of fields in the datasource are equal in all the servers i.e DEV as well as PROD servers.(I have checked in the RSO2 --> Extract structure of the standard Datasoources).
We are having the mappings for the fileds that are not seen in the LBWE on the BI side.
Please suggest me whether i can proceed further with this existing datasources or do i need to adjust the extract structure maintanance of PROD server in LBWE as per DEV server.
We are going live in few more days and came across this now after the transports to PROD,
Do we get any issues in the data loads with this differences in structure or can we neglect it?
Please give me your valuable inputs....
Thanks in advance...
Kumuda

Hi Kumuda,
It is this way,
The Production and the Dev have to be in SYNC always PLUS the New Fields addition has to reflect.
1)First Check for the SYNC in RSA6 of Production and Development ,i.e RSA6>SAP-R3>SD-->Then Respective datasource.
They have to be in SYNC ,if not then that means some developemtn have been done to the Datasource by appending the Structure as part of Requiremnt.If the Structure has been enhanced then after repliaction of DS in BI-Dev the New fields will be avaliable in R3 and BI Dev only and not in BI or R3 Produciton, as they have not been transported.
If u have done any dvelopments to this DS,then the Prod and Dev have to match.
Come back with more clarity as to what is the excat siituation so that accordinly we can suggest what to do !!!!
Rgds
SVU123

Early Delta Initialization option in Production system

Hi Experts,
I have seen some threads related to Early Delta initialization in this forum. I have a question regarding this option.
To minimize the downtime/block users in the R/3 production system during set up tables fillup I would like to use the Early delta option. Please give your suggestions on the following procedure:
For Sales Orders, billing and Deliveries
1. Initialize Early delta in the BI system.
2. Go and fill setup tables
3. Do a full load to BI
4. Run delta job in R/3 (LBWE)
5. Run delta job in BI Info package
Do we miss any documents in this process for e.g. during set up tables fill up changes to existing documents or newly created sales orders.
I feel we won't miss. All changes will be reflected in Delta queue. And even newly created orders also will be coming to delta queue.
Please let me know if I am wrong.
Thank you.

Need Clarification on this thread,
According to my understanding, during the filling of set up table if a user does any posting, then the data available in BW will be incorrect.
am i right?
In your sequence the 4th step
4. Run delta job in R/3 (LBWE), this means you are using queued or unseriallized v3 update.
Early delta iniliazation essentially of no advantage because, as conventional initialization procedures, you can readmit document
postings after successfully filling the setup tables.
can anybody clear my doubt. is it possible during setup table filling user can post a document.
I know the documents will be collected in the queue. But the data loaded to bw will be incorrect right?
Regards,
Anand.
Edited by: araj123 on May 26, 2010 11:41 AM

Problem in periodic job scheduling in LBWE

hi,
i have activated the Material movements datasource 2LIS_03_BF. Filled up the set up table.
now when i try to schedula a job in jobcontrol, under the tab *immediate* the immediate start check box is checked and disabled. the periodic job check boxat the bottom is unchecked and disabled.
the periodic values button which has to be near the check button is not present.
i even tried for other datasources, the periodic job is disabled in all and periodic values button is not found.
could anyone suggest me on this issue.

Hi,
Did you initialize delta for 2LIS_03_BF from BI? If not, first initialize the delta and try to schedule V3 job from LBWE.
By default *Immediate start * check box will be in disable mode. If you want to run it immediately just click on Save button.
If you want to schedule it for future date and time then click on Date/time button then enter schedule start date and time and click on Save button.For more details about scheduling options please look at following link.
http://help.sap.com/saphelp_nw04/helpdata/EN/c4/3a7fae505211d189550000e829fbbd/frameset.htm
hope it works...
regards,
Raju
Edited by: VaraPrasadraju Potturi on Aug 3, 2009 8:54 AM
Edited by: VaraPrasadraju Potturi on Aug 3, 2009 9:02 AM

Key figures are not available when i performing LBWE action

Hi gurus,
I am trying to load 2lis_02_hdr, 2lis_02_itm and 2lis_02_scl to infocube 0pur_c04.
But whatever the key figures available in the cube its not appear in the R/3 side data Source.. but those keyfigures are available in LIS structure.. for that how can i bring those key figures to dataSource for using LO Cockpit..
I heard we need to perform some prerequistes in SBIW.. let me know in breif with step by step..
Full points will assign to all those reply my query early..
Please let me know if not understand my query..
Thanks in Advance

Hello Sudheer
2LIS_02_HDR, ITM and SCL do not take data from S011 but directly from transactionnal tables like EBEP, EBKO, EBPO (names quoted from memory).
So you have to look for the key figures from those tables and not the one in S011.
Historically, the three datasource were built to replace 2LIS_02_S011 but the calculations to rebuild the keyfigures were delivered in BW in an old BCT that made the conversions. The logic and modeling have changed completely.
If you really need to transfer S011 to BW without remodelling the data, you may want to use a generic extractor based on S011 (provided you have a delta key available).
Otherwise, in SBIW, Options for datasource specific to the application, Logistics, purchasing, you have two customizing transactions. you have to define branch and process key to load data into BW. But that will not have any effect to LBWE.
Hope this helps.
Regards
Fabrice

How tochange the Update mode of a extractor in LBWE through a transport

Hello Friends,
I have a question on changing the update mode of the extration in LBWE. Can we change this in Dev system and transport it all the way to production. The client is not happy with openeing the client for this. I appreciate the immediate response.
Thanks
Simmi

Hi,
On the menu bar in the screen when you create the request, you'll see a button next to the delete button that lets you include objects in the request. Click that and you'll get the option to add objects from a request or multiple requests or freely selected objects.
Or you can goto the Request/Task->Object list->Include objects.
The other way you can do this is in the LBWE screen, click on the active/inactive button next to the extract structure and it'll also prompt you for a customizing request. If its active when you click the button it'll go inactive and prompt for a transport. Once saved in the transport, click on the inactive button to activate it again. It'll get saved in the same transport.
Cheers,
Kedar

Unable to add field from structure maintanace opt for datasource(LBWE BI 7)

Hi,
while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
but when we try to add extra field other than with that structure maintanace form append structure option from that structure MC02M_0ITM than it comes in that structure MC02M_0ITM and also can see in RSA2.
Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
Best regards,
dushyant.

It solved automaticaly,
yes later i got that error entry still exit whic solved by deleting setup table and than try,
thanks.
one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
Best Regards,
dushyant.

LBWE TCode as Display in ECC 6

Hi All
I am BW developer and had a question regarding security. We are implementing BW and want to know whether we can make LBWE transaction in ECC6 as a display. As this helps us to do configuration for Logistics, we dont want any one to make changes to the extract structure and also datasource. If we can restrict it to display then how is it possible?

Hi,
> I am not sure if this transaction can be made display only as there is no authority-check statement in the program.
The program does however make several calls to function modules which have authority-check statements in them and the program can also react to the exceptions raised when the authority-check fails.
Whether restricting authorizations will achieve a display version of the transaction I don't know (there is a lot of functionality in there, including scheduling of background jobs), but there are authority-checks and other security mechanisms.
I think you will need to test it (also in combination with client and system settings, also known as "system closed" or "client closed" for customizing changes). The authorization-checks seemed to have a particular focus on deletion, from what I could tell.
As JAI mentioned, ask an ABAPer to take a look at it (also before you go for the user-exit option) to see what your options are.
Kind regards,
Julius

Deletion of request from init option for source system

Hello Experts,
Iam using 3 IP.
IP for init load with data transder, IP for init load without data transfer & Delta.
now with data transfer IP is not used.
i trigered "without data transfer IP", then accidentally "triggered with data transfer IP".
then manually made the request red & deleted data by right clicking datasource-->manage & deleted all the requests(2) available.
now before i load init without data transfer request exists in "init option for source system".
when trying to delete IP
"There are active init selections in source system for this data source. Therefore, only ALL init selections can be deleted at once. Do you want to delete all init selections (all channels)?"
when i choose yes....it takes a long time & gives run_time error status.
Guys, this issue is solved.
I deleted the without data transder first.
now when I load delta, I got error.
"Job terminated in source system --> Request set to red"
regards
KV
Edited by: K V on Apr 10, 2009 2:16 PM

Hi KV.........
U r doing init without data transfer..............it means it will not pick any records...........it will just set the init pointer and along with that Delta queue will get generated.........after that whenever any changes will be done.........or any new records will come.......it will get reflected in the Delta queue.......
So next time when u run the delta load..........data will be fetched from the Delta queue...........
So check the delta queue.......it may happen that there r no new or changed records..................
So check............may be delta queue is 0..............
Also check the update mode for the datasource in LBWE(if Logistic datasource)............if the update mode is Queued delta or unserialized V3 update........then data will first get accumulated in the Extract queue(LBWQ) or update table respectively.............so to fetch records in the Delta queue u hav to schedule the V3 jobs in LBWE............otherwise Delta queue will be empty and fetched records will be 0........
Regards,
Debjani......

Maintanance option at LBWE

Similar Messages

Maybe you are looking for