Maintanence optimizer--terminating at step 1

Hi,
We have our maintanence optimizer in place & were initially able to download sp's.
However,now; after selecting the system,it does not proceed to Step 2.
Also, there is no error.It just displays "Procedure XXXXX saved"
SAP-OSS & SAPOSS RFC's are working fine.
Please help,since we urgently need to download the sp's.
Thanks a lot,
Saba.

Dear Saba,
Could you please implement note no. 1008717 to your system and
check, if problem could be solved?
Should note already be implemented, please read the descriptions from
note 997780 concerning actually missing configuration!
If problem still persists, let me know.
Regards
Amit

Similar Messages

Miantanence Optimizer--terminating at Step 1

Hi,
We have our maintanence optimizer in place (SOLMAN 4.0) & were initially able to download sp's.
However,now; after selecting the system,it does not proceed to Step 2.
Also, there is no error.It just displays "Procedure XXXXX saved"
SAP-OSS & SAPOSS RFC's are working fine.
Please help,since we urgently need to download the sp's.
Thanks a lot,
Saba.

Dear Saba,
Could you please implement note no. 1008717 to your system and
check, if problem could be solved?
Should note already be implemented, please read the descriptions from
note 997780 concerning actually missing configuration!
If problem still persists, let me know.
Regards
Amit

Table QMEL is partially active ERROR AS Adjustment terminated in step 6

Dear all,
i have added some fields in qmel by using append structure but i am then i am trying to activate table via
tcode se14 but i am error message as Adjustment terminated in step 6.
Can any one help me on this...
Thanks
Sivakumar Ramakrishnan
Edited by: Siva Kumar on Feb 10, 2011 1:07 PM
Edited by: Siva Kumar on Feb 10, 2011 1:16 PM

hi
just i added some fields in in append structure and then i tried to active table qmel in SE14 but i am getting error message
Adjustment terminated in step 6
Conversion could not be restarted
TABL QMEL already exists
Renaming of table QCM8QMEL to QMEL failed
Error in step QMEL-STEP6
Thanks
siva

Configuring maintanence optimizer

Hi everyone
Can someone help me by providing the documents for configuring maintanence optimizer in the solution manger ( i.e., how to configure the SAP-OSS rfc connection and downloading the support packages )
It is urgent.
Thank you.
kirankumar.

Check note 990534 and the attachemts to this not. THis will help you to configure MOPZ
Follow-up SAP note 990534
--> Goto Transaction SCPR20. In transaction SCPR20, activate the SOLMAN40_MOPZ_TTYP_SLMO_000 BC Set in your Solution Manager clients. Perform the activation in expert mode with the option "Overwrite Everything". You can select expert mode after you have chosen "Activate".
--> Create a new transport request (transaction SE09) in the source client of your Solution Manager system. Unpack file SOLMAN40_MOPZ_TTYP_SLMO_000.zip, which is attached to this note. Copy the contents of the SOLMAN40_MOPZ_TTYP_SLMO_000.txt file into the transport request. Use transaction SCC1 to import the transport request into your Solution Manager client.
Check the following notes aswell
975510
1020789
997780
1025381
1024105
Thanks
Prince Jose

Solution Manager (SP 10) Maintanence Optimizer

Hi,
While configuring the Maintenance Optimizer, using the Activity "Activate Integration with Change Request Management" In the 1st activity list "Activate Change Request and Set - up Client by mistake i entered the wrong client id, and now it just doesnt let me change it.
Is there anyway that I can change it?
Also when I click on Maintanence Optimzer button, in Support Package and Stack Inbox I get the following error " Local logical system is not defined ". What does it mean? Is it because of the wrong client ID that i mentioned about above?
Any help on this will be much appriciated.
Thanks,
Vikram

Transcation SPRO
IMG Activity -> Sap Solution Manager -> Initial Configuration ->
Solution Manager - > General Configuration -> Maintain Logical Systems
Define Logical System
Add a unique ID and some name, then assign this logical system to the client you are using for Optimizer in the "Assign client to System.
I would suggest that you also do all the initial IMG activity step by step.

Help about Solution Manager Maintanence Optimizer

Hi All,
I have a small confusion how to follow the configuration of Maintenance Optimizer in Solution manager.
Yesterday i installed the solution manager and assigned the ECC server to that solution manager using SMSY transaction.
Now i have to configure maintenance optimizer; what are the doubts i have:
1) I choose 001 client to configure; now i have to create any user with all roles or else can i use sap* ?
2) what are the roles i have to assign that new user?
3) Now what step i have to follow; it mean goto transaction SPRO and follow or any other configuration is required?
Please give me some suggestions...
Thanks & Regards,
Vivek N.

> 1) I choose 001 client to configure; now i have to create any user with all roles or else can i use sap* ?
just create user with profile SAP_ALL and sap_new
> 2) what are the roles i have to assign that new user?
give all authirisation sap_all
> 3) Now what step i have to follow; it mean goto transaction SPRO and follow or any other configuration is required?
check http://service.sap.com/solman-mopz and SAP Note: 1024932
Samrat

Problem with Maintenance Optimizer after first step

Hi all,
I have problem with Maintenance Optimizer after I choose system and save transaction, I click on Continue button, but nothing happens....
Any ideas?
Regards,
Lazar Hristov

I resolved my problem.
I activate from spro -> Initial Configuration II, then activate BC Set for mopz and now everything works fine.
Regards,
Lazar Hristov

Terminating Activity step with error

Hi,
I have an Activity step which task executes a method of a class. This method returns result code (and I do binding to WF) and if it is not 0 I would like to terminate this step (workitem) in error status. How is the best and easiest way to do this?
Thank you in advance,
Anna

Thank you.
But I am not able to set any handling in case of error of this step - if this fails it must be possible to see in worfklow log as error. If I set an exception in method and later not catch it in workfow, would I see it as erroneus?
Anna

Main optimizer error - There is already a transaction for the system

Hi Guru's,
I am trying to download support packs from maintenance optimizer in solution manager system. When i select the logical system it gives the error
'There is already a transaction for the system of this product version'
After this error, it does not proceed further.
There is many maintanence transactions in Maintanence optimizer. Now how to remove all these.
Any ideas or solutions most welcome.
Moses

As Christian has already written, the only problem is that there is already an open Maintenance Transaction for that specific system. Maintenance Optimizer checks that you do not open two different Maintenance Transactions for a system at the same time.
You only have to withdraw the old Maintenance Transaction to be able to proceed with the new one. Open the old Maintenance Transaction and click "Withdraw" on the bottom of the page. If it is grayed out, you need to go one step backwards, there you can withdraw it.
Best regards,
Joachim

Dependency List for ESS SP11 using Maintanance optimizer ?

I need to somehow get a dependency list for ESS sp11 patch. I was told that this can be done on the Solman 4 system using Maintanance optimizer. I can see how to impliment the service pack but not how to generate a list of dependencies that I can present to the customer. Any help would be greatly appreciated.
Edited by: VASQUEZ J. David on Feb 12, 2008 8:28 PM

Hi VASQUEZ,
You can see the dependencies ESS in the service market place only,you can see the import conditions for that particular package.Solman's maintanence optimizer is used to approve the download of that stack.Here you can not see the dependencies using solman.I think if you want to install patches for java they are cumilative,you can directly go from your current patch level to the recent one present in the market place.
Reward points if helpfull.
Regards,
Vamshi.

Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution

Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution?? please...

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
          Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
           ▹ Restart
from the menu bar.

How to approve in maintenance optimizer for download.

Dear All,
I need to download support pack and other software like SAP JVM Switch tool 1.0 from service market place.
It is asking for approval, Could you please specify which tcode is needed for maintenance optimizer and step by step
solution to approve the software.
Regards,
Dilip

Hi Dilip,
refer link :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/304f52c1-3aae-2910-6081-8d1deace58f3?QuickLink=events&overridelayout=true
look for section Maintenance optimizer - Screens , where step by step screen shots are provided to approve packages.
You need to go to Tcode DSWP --> go to correct/active solution --> Change management --> Maintenance optimizer
Make sure that the SAP user id you are trying to access have S user id linked , check Tcode AISUSER
Regards,

ZENWSbrowser or C1 - Remote Control on a terminal server

When launching ZENWSBrowser or C1 Remote Control on a terminal server Step 1
I login as user "A" and am able to successfully Remote Control, View, ETC...
any workstation. But while user "A" is logged in to the terminal server,
User "B" or any Other user that logs into the Terminal Server and tries to
remote control, after selecting the WS then selecting Remote Control, View,
ETC... this user "B" gets nothing however User "A" who is still logged in
gets User "B" requested remote control session. Any Ideas?

I could write a small wrapper that killed Java.exe when Desktop4.exe was
launched.
I don't know if that would help you.
If you want me to do that, drop me at note at my email craig_d_wilson at
yahoo.
It would take me all of about 5 minutes.
Craig Wilson
Novell Product Support Forum Sysop
Master CNE, MCSE 2003, CCNA
Editor - http://www.ithowto.com
(Seeking Full-Time Expert? Drop me a note :> )
"Toby LeBlanc" <[email protected]> wrote in message
news:[email protected]...
> OK here's what we believe to be the issue. It seems that desktop4.exe
> when run independently or through ZENWSbrowser lauches it kicks off
> Java.exe but doesn't release it. If we kill java.exe process then all is
> well. This does not happen with Console1. I have upgraded to the latest
> C1, Snapins and even tried copying the latest release of Java over the jre
> dir inside the C1 directory. So is Java.exe launched by desktop4.exe in
> server or client mode? There appears to be a switch (-client) for
> java.exe that allows you to launch it in client mode that may resolve this
> issue.
>
> We are going to attempt to upgrade the terminal server to Windows 2003
> so that we can set it to kill java.exe if it is running for more than 15
> seconds or so but this is obviously not a good solution. Besides I hate
> to allow the Microsoft Funkies here to fix my Novell problem with a
> Microsoft solution, it would give them way too much pleasure. Anyone have
> any thoughts?????
>
>
>
> "Toby LeBlanc" <[email protected]> wrote in message
> news:[email protected]...
>> When launching ZENWSBrowser or C1 Remote Control on a terminal server
>> Step 1 I login as user "A" and am able to successfully Remote Control,
>> View, ETC... any workstation. But while user "A" is logged in to the
>> terminal server, User "B" or any Other user that logs into the Terminal
>> Server and tries to remote control, after selecting the WS then selecting
>> Remote Control, View, ETC... this user "B" gets nothing however User "A"
>> who is still logged in gets User "B" requested remote control session.
>> Any Ideas?
>>
>
>

Crazy installer issues

At first I thought this was a problem with a particular application's installer, but now I see it is endemic. I am using
iMac 27" (Mid-2010) 2.93GHz, 16 GB RAM, OS X 10.9.2
Whenever I try to run an installer-dependent application I get as far as entering my computer password. Then I see "Preparing [application name]" and then POOF, the installer is gone. This happens even using apps that I have previously installed successfully. I have repaired permissions, rebooted in Safe Mode using an Admin test account and tried every other trick I can think of.
Here's the Installer Log for one of the applications I tried to install:
FaceFilter304_PRO_SPK.pkg#FF304_DTemplate.pkg : com.reallusion.pkg.FF304LTemplate : 1.0
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: =============================================================================== =
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: It took 0.00 seconds to summarize the package selections.
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/FaceFilter304_PRO_SPK.pkg/FaceFilter304_PRO_SPK.pkg#FF 304_Neutral_Common.pkg
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/FaceFilter304_PRO_SPK.pkg/FaceFilter304_PRO_SPK.pkg#FF 304_ANeutral_Pro.pkg
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/FaceFilter304_PRO_SPK.pkg/FaceFilter304_PRO_SPK.pkg#FF 304_Language_Enu.pkg
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/FaceFilter304_PRO_SPK.pkg/FaceFilter304_PRO_SPK.pkg#FF 304_DCustom.pkg
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/FaceFilter304_PRO_SPK.pkg/FaceFilter304_PRO_SPK.pkg#Un installer.pkg
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/FaceFilter304_PRO_SPK.pkg/FaceFilter304_PRO_SPK.pkg#FF 304_DTemplate.pkg
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: Set authorization level to root for session
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: Will use PK session
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: Starting installation:
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: Configuring volume "Macintosh HD"
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: Preparing disk for local booted install.
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: Free space on "Macintosh HD": 141.24 GB (141242441728 bytes).
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: Create temporary directory "/var/folders/37/z3c_jfjx2jx6qjwzwh58krpm0000gq/T//Install.47839sYL5"
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: IFPKInstallElement (6 packages)
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: Using authorization level of root for IFPKInstallElement
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: PackageKit: Service connection invalidated!
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: PackageKit: XPC error in __43-[_PKInstallClientConnection blockingProxy]_block_invoke (Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection was invalidated.) UserInfo=0x60000047bcc0 {NSDebugDescription=The connection was invalidated.})
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: Couldn't instantiate install client: (null)
Apr 5 15:29:18 Cary-Ws-iMac.local Installer[478]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=200 "There was a problem with the system installer tool." UserInfo=0x610000476540 {NSLocalizedDescription=There was a problem with the system installer tool.}
Apr 5 15:29:31 Cary-Ws-iMac.local Installer[496]: LSExceptions [0x6100000bb660] loaded
Apr 5 15:29:31 Cary-Ws-iMac.local Installer[496]: @(#)PROGRAM:Install PROJECT:Install-846
Apr 5 15:29:31 Cary-Ws-iMac.local Installer[496]: @(#)PROGRAM:Installer PROJECT:Installer-721
Apr 5 15:29:31 Cary-Ws-iMac.local Installer[496]: Hardware: iMac11,3 @ 2.93 GHz (x 8), 16384 MB RAM
Apr 5 15:29:31 Cary-Ws-iMac.local Installer[496]: Running OS Build: Mac OS X 10.9.2 (13C64)
Apr 5 15:29:31 Cary-Ws-iMac.local Installer[496]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Apr 5 15:29:31 Cary-Ws-iMac.local Installer[496]: Env: TMPDIR=/var/folders/37/z3c_jfjx2jx6qjwzwh58krpm0000gq/T/
Apr 5 15:29:31 Cary-Ws-iMac.local Installer[496]: Env: SHELL=/bin/bash
Apr 5 15:29:31 Cary-Ws-iMac.local Installer[496]: Env: HOME=/Users/testadminuser
Apr 5 15:29:31 Cary-Ws-iMac.local Installer[496]: Env: USER=testadminuser
Apr 5 15:29:31 Cary-Ws-iMac.local Installer[496]: Env: LOGNAME=testadminuser
Apr 5 15:29:31 Cary-Ws-iMac.local Installer[496]: Env: SSH_AUTH_SOCK=/tmp/launch-8FDGQV/Listeners
Apr 5 15:29:31 Cary-Ws-iMac.local Installer[496]: Env: Apple_PubSub_Socket_Render=/tmp/launch-Kho7F8/Render
Apr 5 15:29:31 Cary-Ws-iMac.local Installer[496]: Env: __CF_USER_TEXT_ENCODING=0x1F7:0:0
Apr 5 15:29:31 Cary-Ws-iMac.local Installer[496]: Env: __CHECKFIX1436934=1
Apr 5 15:29:41 Cary-Ws-iMac.local mbcachecleanup[280]: Dismissing optimization in progress notification
Apr 5 15:29:42 Cary-Ws-iMac.local Installer[496]: LSExceptions [0x6100000bb660] unloaded
Apr 5 15:29:55 Cary-Ws-iMac.local Installer[496]: Connection to sharingd became invalid
Apr 5 15:29:58 --- last message repeated 2 times ---
Apr 5 15:29:58 Cary-Ws-iMac.local Installer[496]: FaceFilter v3.04 PRO Installation Log
Apr 5 15:29:58 Cary-Ws-iMac.local Installer[496]: Opened from: /Volumes/FaceFilter304_PRO_SPK.pkg/FaceFilter304_PRO_SPK.pkg
Apr 5 15:29:59 Cary-Ws-iMac.local Installer[496]: Product archive /Volumes/FaceFilter304_PRO_SPK.pkg/FaceFilter304_PRO_SPK.pkg trustLevel=100
Apr 5 15:30:28 Cary-Ws-iMac.local Installer[496]: open on /Users/testadminuser/Library/Preferences/RLSetup: File exists
Apr 5 15:30:28 Cary-Ws-iMac.local Installer[496]: open on /Users/testadminuser/Library/Preferences/libRLSetupValidate.dylib: File exists
Apr 5 15:30:28 Cary-Ws-iMac.local Installer[496]: InstallerStatusNotifications plugin loaded
Apr 5 15:30:39 Cary-Ws-iMac.local runner[509]: Administrator authorization granted.
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: =============================================================================== =
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: User picked Standard Install
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: Choices selected for installation:
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]:           Install: "FaceFilter v3.04 PRO"
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]:                     FaceFilter304_PRO_SPK.pkg#FF304_Neutral_Common.pkg : com.reallusion.pkg.FF304NCommon : 1.0
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]:                     FaceFilter304_PRO_SPK.pkg#FF304_ANeutral_Pro.pkg : com.reallusion.pkg.FF304NProgramPro : 1.0
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]:                     FaceFilter304_PRO_SPK.pkg#FF304_Language_Enu.pkg : com.reallusion.pkg.FF304LCommonEnu : 1.0
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]:                     FaceFilter304_PRO_SPK.pkg#FF304_DCustom.pkg : com.reallusion.pkg.FF304LCustom : 1.0
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]:                     FaceFilter304_PRO_SPK.pkg#Uninstaller.pkg : com.reallusion.pkg.FF304PROUninstaller : 1.0
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]:           Install: "FF304_DTemplate"
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]:                     FaceFilter304_PRO_SPK.pkg#FF304_DTemplate.pkg : com.reallusion.pkg.FF304LTemplate : 1.0
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: =============================================================================== =
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: It took 0.00 seconds to summarize the package selections.
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/FaceFilter304_PRO_SPK.pkg/FaceFilter304_PRO_SPK.pkg#FF 304_Neutral_Common.pkg
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/FaceFilter304_PRO_SPK.pkg/FaceFilter304_PRO_SPK.pkg#FF 304_ANeutral_Pro.pkg
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/FaceFilter304_PRO_SPK.pkg/FaceFilter304_PRO_SPK.pkg#FF 304_Language_Enu.pkg
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/FaceFilter304_PRO_SPK.pkg/FaceFilter304_PRO_SPK.pkg#FF 304_DCustom.pkg
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/FaceFilter304_PRO_SPK.pkg/FaceFilter304_PRO_SPK.pkg#Un installer.pkg
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/FaceFilter304_PRO_SPK.pkg/FaceFilter304_PRO_SPK.pkg#FF 304_DTemplate.pkg
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: Set authorization level to root for session
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: Will use PK session
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: Starting installation:
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: Configuring volume "Macintosh HD"
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: Preparing disk for local booted install.
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: Free space on "Macintosh HD": 141.2 GB (141202366464 bytes).
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: Create temporary directory "/var/folders/37/z3c_jfjx2jx6qjwzwh58krpm0000gq/T//Install.496o8sC3C"
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: IFPKInstallElement (6 packages)
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: Using authorization level of root for IFPKInstallElement
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: PackageKit: Service connection invalidated!
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: PackageKit: XPC error in __43-[_PKInstallClientConnection blockingProxy]_block_invoke (Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection was invalidated.) UserInfo=0x60000066b940 {NSDebugDescription=The connection was invalidated.})
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: Couldn't instantiate install client: (null)
Apr 5 15:30:39 Cary-Ws-iMac.local Installer[496]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=200 "There was a problem with the system installer tool." UserInfo=0x61000027de40 {NSLocalizedDescription=There was a problem with the system installer tool.}
Apr 5 15:30:52 Cary-Ws-iMac.local Installer[516]: LSExceptions [0x6080000a6060] loaded
Apr 5 15:30:53 Cary-Ws-iMac.local Installer[516]: @(#)PROGRAM:Install PROJECT:Install-846
Apr 5 15:30:53 Cary-Ws-iMac.local Installer[516]: @(#)PROGRAM:Installer PROJECT:Installer-721
Apr 5 15:30:53 Cary-Ws-iMac.local Installer[516]: Hardware: iMac11,3 @ 2.93 GHz (x 8), 16384 MB RAM
Apr 5 15:30:53 Cary-Ws-iMac.local Installer[516]: Running OS Build: Mac OS X 10.9.2 (13C64)
Apr 5 15:30:53 Cary-Ws-iMac.local Installer[516]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Apr 5 15:30:53 Cary-Ws-iMac.local Installer[516]: Env: TMPDIR=/var/folders/37/z3c_jfjx2jx6qjwzwh58krpm0000gq/T/
Apr 5 15:30:53 Cary-Ws-iMac.local Installer[516]: Env: SHELL=/bin/bash
Apr 5 15:30:53 Cary-Ws-iMac.local Installer[516]: Env: HOME=/Users/testadminuser
Apr 5 15:30:53 Cary-Ws-iMac.local Installer[516]: Env: USER=testadminuser
Apr 5 15:30:53 Cary-Ws-iMac.local Installer[516]: Env: LOGNAME=testadminuser
Apr 5 15:30:53 Cary-Ws-iMac.local Installer[516]: Env: SSH_AUTH_SOCK=/tmp/launch-8FDGQV/Listeners
Apr 5 15:30:53 Cary-Ws-iMac.local Installer[516]: Env: Apple_PubSub_Socket_Render=/tmp/launch-Kho7F8/Render
Apr 5 15:30:53 Cary-Ws-iMac.local Installer[516]: Env: __CF_USER_TEXT_ENCODING=0x1F7:0:0
Apr 5 15:30:53 Cary-Ws-iMac.local Installer[516]: Env: __CHECKFIX1436934=1
Apr 5 15:30:58 Cary-Ws-iMac.local Installer[516]: Connection to sharingd became invalid
Apr 5 15:31:03 --- last message repeated 2 times ---
Apr 5 15:31:03 Cary-Ws-iMac.local Installer[516]: LSExceptions [0x6080000a6060] unloaded
Apr 5 15:31:09 Cary-Ws-iMac.local Installer[516]: FaceFilter v3.04 PRO Installation Log
Apr 5 15:31:09 Cary-Ws-iMac.local Installer[516]: Opened from: /Volumes/FaceFilter304_PRO_SPK.pkg/FaceFilter304_PRO_SPK.pkg
Apr 5 15:31:10 Cary-Ws-iMac.local Installer[516]: Product archive /Volumes/FaceFilter304_PRO_SPK.pkg/FaceFilter304_PRO_SPK.pkg trustLevel=100
Apr 5 15:31:31 Cary-Ws-iMac.local Installer[516]: open on /Users/testadminuser/Library/Preferences/RLSetup: File exists
Apr 5 15:31:31 Cary-Ws-iMac.local Installer[516]: open on /Users/testadminuser/Library/Preferences/libRLSetupValidate.dylib: File exists
Apr 5 15:31:31 Cary-Ws-iMac.local Installer[516]: InstallerStatusNotifications plugin loaded
Apr 5 15:31:38 Cary-Ws-iMac.local runner[532]: Administrator authorization granted.
Apr 5 15:31:38 Cary-Ws-iMac.local Installer[516]: =============================================================================== =
Apr 5 15:31:38 Cary-Ws-iMac.local Installer[516]: User picked Standard Install
Apr 5 15:31:38 Cary-Ws-iMac.local Installer[516]: Choices selected for installation:
Apr 5 15:31:38 Cary-Ws-iMac.local Installer[516]:

Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock all your user files, reset their ownership, and remove their access-control lists. If you've set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Back up all data.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Cant find the file for approval

Hi Guys,
I have selected service application tool package for download.it requires approval which is to be done in MOPZ.
When i login to our solman i cant find the file for approval in MOPZ.
steps that i follow
1. Tcode DSWP.
2 go to change mdmt
3 select Maintanence optimize.
I cant find the file to approve.
Do i need to create a new maintaince tcode...?
Please help

Hello,
Please make sure that the S user password is not in initial state. Please also make sure that you can login with no issues in the SAP Service Marketplace , and that the 'authorization test' for SAP-OSS works OK.
I am not sure about when you report the error message as: "Logon information is not write." . What do you mean?
Also, you say that you go to DSWP and the file is not there to approve. The correct way to approve files from Maintenance Optimizer when downloading manually, is to create the Maintenance Optimizer document, then choose the manual selection option, then select the files from within Maintenance Optimizer, and then proceed with the download from Maintenance Optimizer.
Best regards,
Miguel Ariñ

Maintanence optimizer--terminating at step 1

Similar Messages

Maybe you are looking for