Maintenace dialog : View cluster

hello , i create few cluster view for testing now i want delete it ( i want reuse some names and dont get other in the list of search help ) but i don't see how delete it
Thanks

>
George Biswal wrote:
> Hi Edgar,
>
> Once you have deleted the dependent objects, finally in the Details of Added Entries screen click on Delete Button (Shift + F2). You will get a information message 'Entry deleted', then click on the save button. You are done with deletion.
>
> George
>
> Edited by: George Biswal on Jun 4, 2009 6:20 AM
Thanks it work

Similar Messages

How to create EVENTS for a View Cluster.

Hi Tech Gurus,
I have created a view cluster on 5 tables. I need to do a validation and this can be done by using events. But i am unable to create a EVENT for the View Cluster. Could anyone please tell me how to create events for a View Cluster.
Thanks in advance for your esteemed replies.
Regards,
Raghavendra Goutham P.

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field FORM routines main program. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

How to create wizard for a custom mainenance view/view cluster

Hi Experts,
I have created 5 custom maintenance view and have maintained all the views sequencially and have made the first mainenance view as the start view & header entry and all other views are child or subview of the header view in a custom view cluster. But I want a wizard to help the user / end user successfully enter all the required values for all child views, it will help the user to navigate from the start view to all the child views where the fields of the wizard will be associated to the child maintenance views.
Please suggest how to create wizard for view cluster.
I'll give max reward point for the helpful answer.
Thanks in advance
koustav

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field FORM routines main program. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

How to maintain the data in the view cluster

we are doing upgrade, we have one view cluster app_log in this object scwb
and subobjects is swtlo1,02,03 like i have some subobjects in 4.6c we transported the view cluster to ecc6.0 in ecc 6.0 i have object scwb but subobjects doesn't exist how to maintain the subobjects in view cluster.

Definition
A view cluster is a group of maintenance dialogs which are collected in one maintenance unit for business or technical reasons. They allow related data in more than one table/view to be maintained consistently.
Use
Whereas only 1:1 relationships can be processed in maintenance views (except for language-dependent texts), key extensions and relationships of cardinality N:M can also be handled in view clusters. Maintenance dialogs with no key, or partial key-dependence, can also be combined into view clusters.
Grouping dialogs into one maintenance unit has the following advantages for data maintenance:
Navigation: A view cluster contains convenient standard navigation between the individual maintenance dialogs. This simplifies the maintenance of the data in a view cluster.
Consistency: The view cluster ensures data consistency when deleting, copying, saving, retrieving and manually transporting data. For example when an entry in a higher-level view is deleted, , it automatically ensures that all dependent entries in lower-level views are also deleted.
You can first split tables with a lot of fields into various views and then collect them into a view cluster.
Use tabs to format very wide tables with a lot of fields.
Structure
Navigation in a view cluster is usually based on the hierarchy of the tables/views on which the dialogs are based. A view cluster usually consists of one or more root dialogs and the at most 14 maintenance dialogs which depend on them. A view at a lower level has one or more additional fields in its key compared its higher-level view. Each data record at the higher level has several dependent data records below it.
Each maintenance dialog is an independent unit consisting of an overview screen or an overview and a detail screen, depending on the dialog type. As well as the data to be maintained, the overview screen contains a navigation area, in which you can go to higher or lower level maintenance dialogs.
One-level maintenance dialogs only contain one screen, the list screen, in which all existing data records are displayed in a table. In a two-level maintenance dialog, double-clicking on a data record in the list screen takes you to the detail screen, which displays all the fields in the selected data record.
Generate a maintenance dialog for each view before you call the cluster maintenance (SM34). When you generate the maintenance dialog, flag the key fields which are identical in the view and its higher-level in the cluster, with the maintenance attribute S. The system fills the key fields when you go from the upper to the lower level, with the values of the data record selected in the upper level. Go to the transaction SE54 to define a view cluster.
Rewards point if useful.......
regards....
Abhaysingh.

Query on view cluster event trigger during transport

Hi SAP Gurus,
I would just like to ask if the subroutines set in events for view clusters would also get triggered upon transport.
We had created a function module which is meant to regenerate a dynamic program when changes are made to a particular table. We're planning to call this function module in a subroutine that is called during an event in the view cluster (set to "before saving the data to database"). However, we would also like for this dynamic program to be regenerated automatically once the table changes are transported to the test/prod systems. Thus, I wondered if setting up the event is sufficient, and that it would also be triggered automatically prior to saving the changes to the database during transport, or if we still need to set up XPRA for this.
Thanks!

Some events are triggered when exportingthe changed data,
- 10 After creating the change request header entries (E071)
- 11 After changing a key entry in the change request (E071K)
- 12 After changing the key entries in the change request (E071K)
which are suitable to add a XPRA entry in the request
But many events (AFAIK those without dialog) are triggered during import (and we can check if the program is called via transaction or import via flag VIM_IMPORT_MODE_ACTIVE, eg. do not execute a form which fill hidden fields like created by and created at.)
Regards,
Raymond

Event in maintainance view not working in View cluster

Hello All,
 I have created a view for a student table, which contains three fields. The third field should be automatically incremented, based on the entries in the first two fields. The functionality is working fine in the view created, as i have used the event01 in
table maintainance generator->environment->events; with the codes for incrementing the third field automatically.
 After getting this functionality working, i have created a view cluster with the particular view also.
The problem now is that, when i try to enter values to the table via view in the view cluster, the same event is not functioning for auto-incrementing. While saving the entries, the third field is remaining blank.
The internal table 'total' which i am using in the view is displaying the table entries in the view created, but the same table is showing null value in the view cluster.
Can anybody guide me in this?
Thanks in Advance,
Shino.

Hi Shino,
Let`s say you have a table ZTEST_TABLE1. You create a maintenance view on it ZTEST_VIEW1. You generate the maintenance dialog for the view with Function Group ZTEST_FUGR1. After this you will be able to maintain the table from SM30 using view ZTEST_VIEW1.
You create view cluster ZTEST_CLUSTER1 and include your view ZTEST_VIEW1 in it. After this you can maintain the table from the view cluster as well. You then create a subroutine pool for the event routines like ZTEST_PROG1. In this program you include the program I mentioned: INCLUDE lsvcmcod.
Now you create the event 04 - Before saving the data in the database. You specify the routine name eg BEFORE_SAVE and assign the subroutine pool as the main program. There you create the FORM. Example code below.
I suggest to check the SAP Library, there you`ll find more details as well.
http://help.sap.com/saphelp_nw04/helpdata/en/62/c302c7de8e11d1a5960000e82deaaa/frameset.htm
FORM before_save.
DATA: viewname TYPE vclstruc-object,
 error_flag TYPE vcl_flag_type,
 header TYPE vimdesc,
 wa_total(1000) TYPE c,
 wa_extract(1000) TYPE c.
FIELD-SYMBOLS: <view> TYPE ANY,
 <view_x> TYPE x,
 <ent_x> TYPE x,
 <viewkey> TYPE x.
" assign data of current view to global field symbols (<vcl_total>, <vcl_extract> etc.)
viewname = 'ZTEST_VIEW1'.
PERFORM vcl_set_table_access_for_obj USING viewname
 CHANGING error_flag.
" get view name (if you`ll use several views to make it dynamic)
READ TABLE <vcl_header> INTO header INDEX 1.
" assign field symbols
ASSIGN: wa_total TO <view> CASTING TYPE (header-maintview),
 <view> TO <view_x> CASTING,
 <view_x>(header-keylen) TO <viewkey>.
" <vcl_extract> is not sorted
SORT <vcl_extract>.
LOOP AT <vcl_total> INTO wa_total.
" your checks and modifications on the record using <fs_view>
" IF <fs_view>-fieldxy...
" apply the changes to the EXTRACT table as well
 READ TABLE <vcl_extract> INTO wa_extract WITH KEY <viewkey> BINARY SEARCH.
 IF sy-subrc = 0.
" apply your changes to <vcl_extract>
 ENDIF.
ENDLOOP.
ENDFORM. "before_save

Sorting event on view cluster possible?

Hi,
Can anyone please tell me if it is possible to create a event for view cluster for sorting on a non key field of one of the underlying maintenence views.
Thanks..

Some events are triggered when exportingthe changed data,
- 10 After creating the change request header entries (E071)
- 11 After changing a key entry in the change request (E071K)
- 12 After changing the key entries in the change request (E071K)
which are suitable to add a XPRA entry in the request
But many events (AFAIK those without dialog) are triggered during import (and we can check if the program is called via transaction or import via flag VIM_IMPORT_MODE_ACTIVE, eg. do not execute a form which fill hidden fields like created by and created at.)
Regards,
Raymond

Hiding a Maintenance View in a View Cluster

Hello ABAP Experts,
We have a scenario where we would like to hide a maintenance view to an existing view cluster based on condition.
Is it possible via events of a view cluster, where i can hide the view at runtime based on some condition before the view cluster is displayed ?
Is there any way as well, which help achieve this hiding of views ?
For example in the below View Cluster, i would like to hide "Define object links" view from the main view cluster "Define document Types".
Thanks,
Naresh

Hi Naresh,
Yes, you can do it in events of a view cluster, define a subroutine and bounding it to event(02) in SE54,
when you define the subroutine, it will ask you creat a mian program, in this main program, you need 'INCLUDE lsvcmcod'.
Then you can access some standard data, http://help.sap.com/saphelp_nw04/helpdata/en/62/c302c7de8e11d1a5960000e82deaaa/frameset.htm
INCLUDE lsvcmcod.
FORM yourSubroutineName.
DATA: viewname TYPE vclstruc-object,
        error_flag TYPE vcl_flag_type,
viewname = 'ZTEST_VIEW1'.
* PERFORM vcl_set_table_access_for_obj USING    viewname
*                                       CHANGING error_flag.
----> according your condition to change the view.
IF xxx = yyy.
DELETE vcl_struc_tab WHERE object = viewname.
ENDIF.
ENDFORM.
regards,
Archer

Error while saving a Entry through view cluster ( getting TK 319 message)

We are facing an issue while saving the entry in one of the view at the lowest level of the three level View cluster.
Please find the Details of view Cluster below.
1)First level- Key => MANDT( CLNT, 3) + RULE_ID( CHAR , 20) .
2)Second level-Key =>MANDT( CLNT, 3) + RULE_ID( CHAR , 20) + LOCATION_TYPE (CHAR , 20) + START_DATE( DATS ,8).
3)Third level (Lowest level )-key => MANDT( CLNT, 3) + RULE_ID( CHAR , 20) + LOCATION_TYPE (CHAR , 20) + MEAL_RULE_TYPE( INT1 ,3) + START_DATE( DATS ,8) .
we are not able to save the Entry at the Third level and is getting the Message "Fill table key for table ITC_CALCRULE_ML only up to position 044 only " .
As per our understanding problem is that " the transport interface is called with a incorrect object key for table ITC_CALCRULE_ML " . we thaught of either reduce the width of the key or if we want
to define also the date, by changing the order of MEAL_RULE_TYPE and START_DATE .Also we could use a CHAR1 instead of the INT1 for the MEAL_RULE_TYPE.
After analyzing this we came to a conclusion that we have two solutions for solving it.
1) Database Design Change : Which is generally not preferable.
2) Apply the Event 12 ( After changing the key entries for the change task (E071K) ) on the view and in its code we reduce the Object key width for the Transport Organizer and
would be able to save the entry in the database and would be able to transport the entries to our Q-system.

Hi. Were you able to fix the error?

Error while creating a View Cluster

Hello Gurus,
     I have created two maintenance views ZVIEW1 & ZVIEW2 with table maintenance generator.Know I am trying
     to create a view cluster using these views.
     I have Proceeded with the following steps to create the View Cluster:
     1. Tcode : SE54 --> GIven the name ZVIEWCLUSTER as View Cluster name & pressed ENTER.
     2. Filled the description of the View cluster.
     3.Selected the tab OBJECT STRUCTURE and filled it with ZVIEW1 & ZVIEW2.
     4.Selected view ZVIEW1 and clicked on button "FIELD-DEPENDENCE" ,System throws a message
         "Field-dependence generated succesfully"
     5. Selected view ZVIEW2 and clicked on button "FIELD-DEPENDENCE" ,System throws an error message
         "No log generated".
      Am stuck up at point 5 in the above mentioned steps.
      Please guide me in coming out of this error message.
Regards,
Najam

Hi Najam,
I don't think you need to define field dependencies for both tables, you only define the relationship from the second table to the first.
Double-click on the Field dependencies folder and check the link between the two tables is correctly defined, if so you don't need to generate the field dependency twice.
Regards,
Nick

Sorting of a field in view cluster

Hi All,
Is there any way to sort a field in main screen of view cluster.
SE54->Edit view cluster->Test. I want to sort a field in main screen, after pressing test.
Is there any event for this?
I know the events which get called after pressing test, but tables TOTAL and EXTRACT are blank in these events so I can't sort them.
Pointers will be highly appreciated.
Regards,
Seema

hi
In your method there would be a parameter ie ON_TOGGLE where you can write the name of your event .
Whenever your checkbox will be clicked that event wil be called.
You can write your code in that event itself.
Regards
Kuldeep

How can i display a dialog view centerly?set_window_position has no effect

hi ,all
i try to open a dialog which is a normal view,
here is the code i use,
CALL METHOD cl_wdr_runtime_services=>display_view_in_popup
        EXPORTING
          component             = component
          target_view_name      = 'V_BP_MAIN'
          target_window_name = 'W_BP_MAIN'
     MODAL                 = ABAP_TRUE
           window_title          = ''
           close_button          = abap_true
        IMPORTING
           popup_window          = popup_window
the first time the window i opened displayed is centered ,but if i open it twice or more
the window is in the left corner of screen,i tried to use popup_window->set_window_position( position = if_wd_window=>CO_CENTER ).but it has no effect at all
can anyone help me out?
thanks in advance.

thanks for your answer.
I did set the height and width of rootuielementcontainer of the dialog view .i,e,width:1200,height 700,
It display pretty well the first time,but when i open it the second time,the dialog view is not centered,so i can't see the whole dialog view,i have to drag it,

F4 help for a field in item table in a view cluster

Hi All,
I have a view cluster with two tables. I should provide F4 help for field in item table based on the selected row of the header table.
F4 should have only values fetched based on the header table entry.
How can i achieve this. Please suggest.
Regards,
Kusuma K.

Hi amar_war,
use screen painter to edit the screen layout where the field VKBUR is on. Double click the field to get the details screen. Here you can attach a search help to the field.
H_TVBUR has no more parameters, it will display a list of al sales offices with description text
H_TVBVK will also show the sales group, if VKGRP is a screen field, it will restrict the result list automatically on matching VKGRP.
H_TVKBZ has also VKORG VTWEG SPART - it will take those values from screen if filled.
If you are not satisfied with the results, you can easily create your own search help using own selection method and own search help exits if required.
Try standard search help for standard field first.
You can create a copy of VKBUR as ZVKBUR and attach search help there, you can create your own screen structure and attach the search help there - 50 ways to get your search help...
Regards,
Clemens

Swapping the fields in a view cluster

Hi
I have a view cluster with the fields in the order FIELD1, FIELD2, FIELD3, FIELD4.
My requirement is that it should come in the order FIELD1, FIELD4, FIELD3, FIELD2.
Help me on this.
Thanks in advance.
Regards
Karthik

after fetching you can pass them to the required order into another internal table of the required order.
or define you internal table the way you want the data to come and in select statement it self you can use into corresponding fields to get the data in their respective positions

Dump while copying the entries in view cluster

Hi Experts,
I am having a scenario where i am getting the dump while copying the entries through the vies cluster.
I have 2 tables CU00 and CU01. CU01 is depended on CU00.
CU00- it is having schema which are defined by the user.(SCHEMA-P,DESC)
CU01- this table is having the different tabs in a tab strip for a each of the user defined schema.(SCHEMA-P,SEQNO-P,TABID)
the data will be as follows
In CU00
          SCHEMA1         first schema
          SCHEMA2         second schema
In CU01
          SCHEMA1         01              TAB1
          SCHEMA1         02              TAB2
          SCHEMA2         01              TAB2
          SCHEMA2         02              TAB3
I maintained above 2 tables in a view cluster by making CU00 is the start point and defined the field dependencies as well.
in the T-code SE54 i tried to copy the existing schema and all its dependencies(means all the dependent entries in the CU01 table also).
when i pressed the SAVE button it is going for the dump by saying due to duplicate entries in the table CU01.
but it should check the consistency and display the error message when i pressed the COPY key.
I am badly struck up here. Please help me on this issue.
thanks in advance.

Hi Gouri,
CU01 and CU00 both are dictionary tables.
What I think is, while copying all the dependencies for a particular schema the system ha to check whether the data can be inserted into the child tables or not. I too dont know whether this can be done or not.
If not, it should display an error message stating that " primary key violation occurs please use different key values..."
thanks for the reply.

Maintenace dialog : View cluster

Similar Messages

Maybe you are looking for