Maintenace Optimizer

Dear all,
1.I am trying to configure maintenace optimizer in our system.According to the NOTE:990534 when i tried to activate the BC set SOLMAN40_MOPZ_TTYP_SLMO_000 it activates with error.For most of the warning the message was as follows
The BC Set to be activated contains a customizing object of type view cluster. The BC Set does not contain data records for all hierarchy levels (views) of this view cluster. You cannot go to the data activated for a lower-level view in the cluster, if the BC Set or the database contain no data for the higher level.
How can we avoid this warning?
2.When i try to Confirm file in download basket(in maintenance optimizer) it gives me the error Not a valid user for call of SAP backend System.But the user was defined in AISUSER in spro.Do we need to give some authorization in service market place?
Please help to close this issue

Hi Avinash,
You must have activated all the BC sets in TC SCPR20 and that to in expert mode and overwrite data box checked, if not please do it.
Moreover for connection to SAP while downloading some file you need to have a S-user that is used to connect to the market place. Next you have to perform the following Activities
1. Enter a Solution Manager user in field User.
2. Assign an SAP Support Portal (S user without S), in the field Contact.
you need maintenance authority for authority group AISU for this activ ity (authority object S_TABU_DIS). The role SAP_SUPPDESK_ADMIN has this authority, so provide this role to the user created.
Hope this will suffice your problem
Thanks
Manas

Similar Messages

Maintenace Optimizer configuration issue

Hi,
I configured maintenance optimizer step by step as mentioned SAP. But getting a short dum when executing transation code solution_manager ->Change managemnet->Support Package Stacks-> "Maintenance Optimizer"
Following is the short dump :
Runtime Errors         MESSAGE_TYPE_UNKNOWN
Date and Time          13.04.2007 17:07:46
Short text
     Message type " " is unknown.
What happened?
     Error in the ABAP Application Program
The current ABAP program "/TMWFLOW/CL_MO_UI_REQUEST_MODLCP" had to
      terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     Only message types A, E, I, W, S, and X are allowed.
Trigger Location of Runtime Error
     Program                                 /TMWFLOW/CL_MO_UI_REQUEST_
     Include                                 /TMWFLOW/CL_MO_UI_REQUEST_
     Row                                     37
     Module type                             (METHOD)
     Module Name                             CRM_MODEL_GET
Please suggest me to resolve the issue?
Regd,
Harish

Hello Harish,
Ensure SAP Note 1024932 has been implemented.
Would you please double check the note:
990534     Solution Manager Maintenance Optimizer: BC Set
especially the following part:
To do this, implement the correction instructions of this note
into your system. These correction instructions create report
SM_PREP_MAINTENANCE_OPTIMIZER in your system. Use transaction
SE38 to execute this program in your Solution Manager client.
After you successfully execute this program, the Maintenance
Optimizer is configured.
Call transaction SE80 and select Repository Browser -> Program.
Enter the program name: SM_PREP_MAINTENANCE_OPTIMIZER
Select the glasses.
Now select the 1st line from the tree and with the right mouse click
select "Activate".
When you have succesfully activated the objects, please call transaction
SE38 and run program: SM_PREP_MAINTENANCE_OPTIMIZER.
The configuration for the Maintenance Optimizer will be done by the
report.
Hope this helps,
Dolores

Nothing displays in Product Version Dropdown of Maintenance Optimizer

I'm trying to download patches/packages via Solution manager . The problems is my systems have disappeared from the Product Version dropdown. This was working fine last weekend. I've made no changes to my systems
Solution Manager -> Solution Operation -> Change Management -> Maintenace Optimizer -> Create New Maintenance Transaction
Nothing is displayed in the Product Version dropdown.
Kindly assist on how I can make the systems reappear
Regards

Check No system for selection

Runtime Error : UNCAUGHT_EXCEPTION

Hi Solman Experts,
While downloading softwares through Maintenace Optimizer ( Solution Manager ),I am getting below error..
First Error :
Function module /SDF/AL_MAP_TRANSID_LOGH does not exist.
The Maintenance Optimizer can automatically determine which files you require to update the ABAP and Java software components of your systems.
The search is performed for all instances of the selected systems flagged as relevant.
I have already checked in service market place and apply the SAP note 1135893 and we have activate the some components (BC Set)
See Note 898614 after that i am getting big problem.
Second Error : ( ABAP Dump )
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_SOCM_NOT_IMPLEMENTED
Date and Time          31.03.2008 15:04:31
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_SOCM_NOT_IMPLEMENTED' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_CHM1_CHANGE_REQU_INSTANCE==CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_SOCM_NOT_IMPLEMENTED', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
An exception occurred
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
*"UNCAUGHT_EXCEPTION" "CX_SOCM_NOT_IMPLEMENTED"
"CL_CHM1_CHANGE_REQU_INSTANCE==CP" or "CL_CHM1_CHANGE_REQU_INSTANCE==CM009"
"IF_EX_SOCM_CHECK_CONDITION~CHECK_CONDITION"*
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "ALBE0510"
Network address...... "10.201.180.10"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "ALBE0510"
Database type..... "MSSQL"
Database name..... "SP0"
Database user ID.. "sp0"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Oct 23 2007 00:33:51"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 133
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 41898400
Heap.... 0
Page.... 40960
MM Used. 33604960
MM Free. 4099184
User and Transaction
Client.............. 001
User................ "KONS222"
Language key........ "E"
Transaction......... "DSWP "
Transactions ID..... "AE21FFDCBA44F199AB15005056836080"
Program............. "CL_CHM1_CHANGE_REQU_INSTANCE==CP"
Screen.............. "RDSMOP_MAIN 0100"
Screen line......... 5
Information on where terminated
Termination occurred in the ABAP program "CL_CHM1_CHANGE_REQU_INSTANCE==CP" -
in "IF_EX_SOCM_CHECK_CONDITION~CHECK_CONDITION".
The main program was "RDSMOP_MAIN ".
In the source code you have the termination point in line 612
of the (Include) program "CL_CHM1_CHANGE_REQU_INSTANCE==CM009".
Source Code Extract
Line
SourceCde
582
conditions_ok = cl_socm_integration=>false.
583
ENDIF.
584
ENDIF.
585
586
WHEN 'S_USER_CHECK'.
587
conditions_ok = cl_socm_integration=>true.
588
CALL METHOD cl_sm_base_sender=>get_assigned_suser
589
EXPORTING
590
i_no_dialogue      = 'X'
591
       IMPORTING
592
         e_suser            = e_suser
593
         e_partner_no       = lv_parnr
594
EXCEPTIONS
595
no_user_assigned   = 1
596
no_customer_number = 2
597
OTHERS             = 3.
598
IF sy-subrc = 1 OR sy-subrc = 3.
599
conditions_ok = cl_socm_integration=>false.
600
ENDIF.
601
WHEN 'NO_CRTCL_OBJ'.
602
conditions_ok = me->check_crtcl_obj( ).
603
WHEN '0NO'.
604
conditions_ok = cl_socm_integration=>false.
605
WHEN '0YES'.
606
conditions_ok = cl_socm_integration=>true.
607
WHEN '0BREAK'.
608
BREAK-POINT.                                         "#EC NOBREAK
609
WHEN space.
610
avoid exception since it is the default in table   TSOCM_COND_MAPP
611
WHEN OTHERS.
>>>>>
RAISE EXCEPTION TYPE cx_socm_not_implemented.
613
ENDCASE.
614
615
ENDMETHOD.
Please suggest. Thanks in Advance...
Regards,
Suresh Kumar

Hi Ruben,
I have Implemented both notes now i am getting differt error...
Error is : Error No customer numbers in transaction AISUSER ...
Message Number: SOLMAN_SAP_BACKEND016
Diagnosis
There are no entries with a customer number in the 'Customer Number' field in the table AISUSER.
System Response
You cannot get customer number-specific RFC destinations.
Procedure
Maintain these entries manually or start the report
SMBI_AISUSER_VAR_MIG to copy any existing customer number from the table AISDK_CF_OSS_USR.
Please suggest..
Thanks in Advance..
Regards,
Suresh Kumar
Edited by: suresh k on Apr 15, 2008 3:15 PM

How to add EP(DEV and QAS and PRD systems in solution manager)

Dear Gurus,
I want to include EP dev and qality and prodution systems in solution manager .
While installation of EP(only ASJAVA it is not having ASABAP) i selected solution manager as a Central SLD. But i deleted the systems in solution manger and recreated it again. I created all the systems and datatabae and logical components but in maintenane optimizer it is showing only production system but it is not showing development and quality systems in maintenance optimizer.
How to see developmnet and quality systems in maintenace optimizer.
Same thing for ECC also.
ECC dev and quality systems installed in the same server.
In maintenace optimizer it is showing only dev sysetm it not showing quality sysetm.
Can any body help this probelm.
Thanks & Regards
Rao.

I think you need to adjust your filter settings in the initial screen of MOPZ.
It's in the right top corner.

No in the system SLM configured

Hi,
we recently updated our solman from SP17 to EHP1 SP20 in order to be able to use the EHP4 download options within the solman.
EHP4 selection works fine so far, but there is a warning shown during the maintenace optimizer process which says "No SLM configrued within the system". I am supposed to run tx /TMWFLOW/MOPZCFG and configure the connection to a SLM.
Unfortunately this does not work because I simply don't know what input I should give these config steps. I searched within the solman documentation but I found nothing that helped me.
Does anybody know what steps I do have to make here or where I find the appropriate documentation?
While selecting patches for a system connected to the solman I also found out that the solman brings up too many patches to download. It almost seems as if the solman does not properly read the current system config or implemented SP stack. He simply brings up every possible patch. Is this problem connected to the above mentioned missing SLM?
Thanks in advance,
Kind regards,
Sven

Hi Sven
To enable an automated installation process, you initially need to configure your system landscape. You must define the system landscape in SAP Solution Manager, using transaction Solution Manager System Landscape (SMSY). Alternatively, you need to make the landscape data available in the System Landscape Directory.
The update for the SAP enhancement package 4 for SAP ERP 6.0 (May 2009) has a new section 4.1.3 Solution Manager u2013 System Landscape which provides you with an overview (see http://service.ap.com/erp-inst).
regards
Andreas Rudolph

Product Version SAP ERP 6.0 Missing from solman 7.0

Hi All,
I have installed an ECC6 system and now i need to configure the solution manager and download the support packs
and xml file for EHP4 upgrade. I have done this before where in i configure the new system in SMSY as SAP ERP 6.0
and then configure maintenance optimizer and it gives me the option of Enhancement Package Installation.
However now in the current solution manager i dont see the product version SAP ERP 6.0 when im clicking
trying to creating a new system.
Our Solman version is 7.0 . I tried creating my new system under SAP ERP EHP as ehp version 1 and used maintenace
optimizer but it does not give me the option of EHP package installation. Can any one let me know how to address this
issue??
Regards,
Ershad Ahmed.

Hi,
Goto Tcode SMSY
1. Under Landscape Components --> Product Systems --> Select ERP --> Under that select your system ID and click on it,
Goto --> Header Data on your right side, change the Product Version to SAP ERP 6.0 and SAVE.
2. Goto System Groups and Logical Components --> Logical Components --> SAP ERP --> Create NEW Logical Component for your ECC system under this component and select Production version as SAP ERP 6.0 & assign ur system then SAVE.
3. Goto System Groups and Logical Components --> Solution Landscapes-Operations --> Select your system landscape and REMOVE your ECC systen form the Solution and SAVE.
4. Goto System Groups and Logical Components --> Solution Landscapes-Operations --> Select your system landscape and ADD your ECC system form the Solution and SAVE.
Regards
Kannan.K

Can MOPZ be used without installing Diagnostic Agent.

Hi,
I need a clarification.
In Solution Manger 7.1 Version, can I use Maintenace Optimizer (MOPZ) to download SP's for a Managed System without prior installing Diagnostic Agent on the Managed System? If Yes, please write a brief procedure as below. (because my colleague was telling that one must install DA before using MOPZ).
In older Versions, to use MOPZ:
Send Managed System data with tcode RZ70 -------> The data will arrive in SLD of Solman -------> Assigning a Product and creating a Logical Component in SMSY -----> Assigning the Logical Component to a solution in DSWP --------> Now MOPZ can be used.
Thank you,
Mohan.

Hi Mohan,
Not required any agent for MOPZ setup.
Prerequisite:
*Initial, Basis and Managed system configuration setup( RFC creation, AISUSER assignment)
Open the MOPZ using 2 ways,
option 1. Using LMDB system landscape
option 2. In solman_workcenter -> Change Management -> New Maintenance Transcation ( for new MOPZ)
Prerequisite:
User ID is maintained in AISUSER
Configured Technical System in SMSY.
Follow the below documnet for MOPZ step.
http://scn.sap.com/docs/DOC-26893
Not required to create the solution as show in documnet , directly select the production version and start the MOPZ as show the document, remaining step are same.
Step by step how to Configure System for using MOPZ
Rg,
Karthik

Does SAP upgrade cover prievious security notes.

Hi, i am beginner in security field and have this confusion. I am using Solution Manager to find out missing security notes from my system. Should i filter the result and implement security notes that have been released after the date of the upgrade or should I include all security notes including thoses notes relased before the upgrade date.
Thank You..

In addition to the list of security notes at https://service.sap.com/securitynotes you should have a look to the Security Patch Process FAQ as well.
Concerning your question:
Yes, all security corrections of SAP are part of a Support Package.
But there exist some pitfalls:
By the time when you finally have upgraded your production system, it's already some month old compared with the corresponding development close date for the support package at SAP. Therefore you always will find some new security notes -> Use the Maintenace Optimizer to find new security notes while you are preparing the upgrade and the application System Recommendations monthly.
Several security notes contain manual instructions to configure the system (e.g. concerning profile parameters, RFC Gateway access control lists or logical filenames), which are valid for the new support package. -> I recommend to skip any date selection while searching for security notes. (Use a date interval only if you explicitely want to have a look, e.g. to the notes of the most recent patch day.)
Kind regards
Frank

Self Diagnosis error

Hi All
As per the document of activating maintenace Optimizer , I try to create a new Landscape in our solution manager . If i try the solution_manager tcode and click the self diagnosis is gives the error message like below .
Service cannot be reached
URL http://solman.manager:8000/sap/bc/webdynpro/sap/dswp_sd_self_diagnosis call was terminated because the corresponding service is not available.
Note
The termination occurred in system SLM with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:solman_SLM_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
Kindly give me the soluotion for this .
Regards
Selvan

Hi Selvan,
You need to activate
service dswp_sd_self_diagnosis
with transaction SICF.
Probably, further services have not been yet activated in your SAP Solution Manager.
Go to the IMG (transaction SPRO) and search for the corresponding IMG activity under Basic Settings (Area Solution Manager System).
Regards,
Ruediger

How can I optimize just the video on a project timeline?

Hi everyone,
I've been working on a 1 hour documentary using original non-optimized media, now that I'm approaching the final steps of the edit I would like to optimize all the video in the timeline, but NOT all the footage I have in the events.
I did NOT optimized my media on import: all my events and project are made up of video non-converted, just imported. I did that because I didn't have enough storage to transcode to ProRes the whole 40 hours of footage.
The folders now full of media in Final Cut Events are the "original media" ones.
Now I'll add some title, subtitles and color-correction and I want to be a little more fast. Then I'll step in the "export" zone, and I know it is much better to export from optimized media than from original media, that's why I want a 'ProRes opimized media' project timeline.
Thank you in advance to anyone with advices!

Thank you Tom,
at least I know there is no need I keep on wondering "WHY?"...
This impossibility to transcote footage on timeline seem to me a big downside to this new version... I just have in mind all the options for managing media in FCP 7...
Thank you again,
always read your tips: veru useful!

G770 won't boot normally or in safe mode... I suspect it has something to do with the boot optimizer

My Lenovo G770 will not boot in normal or safe mode. I usually escape out of the boot optimizer. Today I let it run and it went to the "starting windows" screen with a brief startup of the windows 7 animation...it freezes for a second, then a quick flash of the bsod, then to the "windows error recovery page" giving me the option of "starting windows normally" or "Launch Startup Repair (recommended)."
Starting Windows Normally eventually brings me back to the same place repeating what I just stated above paragraph.
When I launch the Startup Repair it "Cannot repair this computer automatically".
So I go to view advanced options for system recovery and support.
It brings me to 5 options:
Startup Repair (we already tried this above)
System Restore (unfortunately I didn't create any restore points)
System Image Recovery (unfortunately I haven't created an image to recover)
Windows Memory Diagnostic (no problems found-done several times)
Command Prompt (don't know what I can do here except for remove a bad/corrupted driver which may be the problem, but I don't know the driver name that is associated with the boot optimizer...can anyone tell me this?)
I've tried booting to safe mode in all of its incarnations and I can't even do that..it repeats the same things as stated above...windows 7 animation briefly starts then locks up, flash of bsod, then the windows error recovery page.
I've tried booting to last known good configuration (same thing occurs...brief startup of windows 7 animation, freeze, flash of bsod, then error recovery page.
The only thing that has given me any kind of result was "disabling system restart on system failure." When I do this, the BSOD doesn't flash briefly..it stays. and it gives me the error message page_fault_in_nonpaged_area.
I'm at a loss as to what to do. Not being able to boot into Safe Mode even is really frustrating. Any advice from anyone? can I remove the driver associated with the boot optimizer? If so, what is the name of the driver and where (directory) is it located?

How did you resolve the issue?
I have the exactly same issue.
When I go System Image Recovery -->Select System Image-->Advanced->I can open all the drives [:Local Drive(C , LENOVO(D, Local Disk(E, Boot(X-where i think executable booting is here]. It comes with an Open prompt asking me to enter File Name with a File type: Setup Information.
I don't know which setup information and where to find it on my Drives.
Anyone know how to fix?
I was trying to re-install Win 7 from DVD but it is not executing either.
Can I boot with USB Ubuntu and Install Win 7 from there??? but how?
Need help?

Column optimization in GUI_DOWNLOAD--Exce

Hi Experts,
I am writing an Excel file using GUI_DOWNLOAD function module. Is there any way to do column optimization in Excel file while downloading.
Thanks and regards,
Venkat

Hi,
There is a Complete & Very good documentation by SAP available on this URL. Please read this.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/204d1bb8-489d-2910-d0b5-cdddb3227820
Hope your query get solved.
Thanks and regards,
Ramani N

Query optimization in Oracle 8i (tunning)

Hi everyone,
The following SQL statement use more than 15% of the CPU of the machine where it is executed. Please if somebody can help me to rewrite or hinting the query.
This is the statement:
SELECT
/*+ INDEX(APD IDX_ABAPLANI_DET_SOL) */
apd.sinonimo,
apd.sinonimo_planificacion,
apd.cod_despensa,
apd.estante_cod,
apd.correlativo_solicitud,
apd.prioridad,
apd.correlativo_det_sol,
apd.insumo_sinonimo,
apd.cantidad_solicitada,
apd.cantidad_despachada,
apd.estado,
apd.sinonimo_usuario,
apd.sinonimo_observacion,
ap.fecha_creacion,
ap.centro_resultado,
aud.nombre,
aud.a_paterno,
aud.rut,
aud.username,
cenres.cod_flex codigocr,
insumo.cod_flex insumocod,
cenres.des_flex despensa_descripcion,
cenres.des_flex crdescripcion,
insumo.des_flex insumodescripcion
FROM
aba_usuario_despachador aud,
cenres,
insumo,
aba_planificacion_detalle apd,
aba_planificacion ap
WHERE ap.sinonimo = apd.sinonimo_planificacion
AND aud.sinonimo = apd.sinonimo_usuario
AND ap.centro_resultado = cenres.sinonimo
AND insumo.sinonimo = apd.insumo_sinonimo
AND apd.sinonimo_usuario = NVL (:b1, apd.sinonimo_usuario)
AND apd.sinonimo_planificacion = NVL (:b2, apd.sinonimo_planificacion)
AND apd.correlativo_solicitud = NVL (:b3, apd.correlativo_solicitud)
AND apd.estante_cod = NVL (UPPER (:b4), apd.estante_cod)
AND apd.cod_despensa = NVL (UPPER (:b5), apd.cod_despensa)
AND apd.estado = NVL (:b6, apd.estado)
AND ap.centro_resultado = NVL (:b7, ap.centro_resultado)
AND TO_DATE (TO_CHAR (ap.fecha_creacion, 'dd/mm/yyyy'), 'dd/mm/yyyy')
BETWEEN TO_DATE (NVL (:b8,TO_CHAR (ap.fecha_creacion, 'dd/mm/yyyy')),'dd/mm/yyyy')
AND TO_DATE (NVL (:b9,TO_CHAR (ap.fecha_creacion, 'dd/mm/yyyy')),'dd/mm/yyyy')
AND apd.estado NOT LIKE :b10
ORDER BY apd.sinonimo;The version of the database is 8.1.7.4.0.
Here is the output of EXPLAIN PLAN:
Plan
SELECT STATEMENT CHOOSECost: 2,907 Bytes: 104,312 Cardinality: 472
     32 SORT ORDER BY Cost: 2,907 Bytes: 104,312 Cardinality: 472
          31 CONCATENATION
               15 FILTER
                    14 NESTED LOOPS Cost: 11 Bytes: 52,156 Cardinality: 236
                         11 NESTED LOOPS Cost: 10 Bytes: 177 Cardinality: 1
                              8 NESTED LOOPS Cost: 9 Bytes: 133 Cardinality: 1
                                   5 NESTED LOOPS Cost: 8 Bytes: 67 Cardinality: 1
                                        2 TABLE ACCESS BY INDEX ROWID ADMABA.ABA_PLANIFICACION_DETALLE Cost: 7 Bytes: 52 Cardinality: 1
                                             1 INDEX FULL SCAN NON-UNIQUE ADMABA.IDX_ABAPLANI_DET_SOL Cost: 3 Cardinality: 1
                                        4 TABLE ACCESS BY INDEX ROWID ADMABA.ABA_PLANIFICACION Cost: 1 Bytes: 15 Cardinality: 1
                                             3 INDEX UNIQUE SCAN UNIQUE ADMABA.PK_ABA_PLANIFICACION Cardinality: 1
                                   7 TABLE ACCESS BY INDEX ROWID ADMABA.ABA_USUARIO_DESPACHADOR Cost: 1 Bytes: 3,498 Cardinality: 53
                                        6 INDEX UNIQUE SCAN UNIQUE ADMABA.ABA_USUARIO_DESPACHADOR_PK Cardinality: 53
                              10 TABLE ACCESS BY INDEX ROWID OPS$NUCLEO.NUC_CODIGOS_FLEXIBLES Cost: 1 Bytes: 14,828 Cardinality: 337
                                   9 INDEX UNIQUE SCAN UNIQUE OPS$NUCLEO.NUC_CODFLEX_PK Cardinality: 337
                         13 TABLE ACCESS BY INDEX ROWID OPS$NUCLEO.NUC_CODIGOS_FLEXIBLES Cost: 1 Bytes: 1.037.828 Cardinality: 23,587
                              12 INDEX UNIQUE SCAN UNIQUE OPS$NUCLEO.NUC_CODFLEX_PK Cardinality: 23,587
               30 FILTER
                    29 NESTED LOOPS Cost: 11 Bytes: 52,156 Cardinality: 236
                         26 NESTED LOOPS Cost: 10 Bytes: 177 Cardinality: 1
                              23 NESTED LOOPS Cost: 9 Bytes: 133 Cardinality: 1
                                   20 NESTED LOOPS Cost: 8 Bytes: 67 Cardinality: 1
                                        17 TABLE ACCESS BY INDEX ROWID ADMABA.ABA_PLANIFICACION_DETALLE Cost: 7 Bytes: 52 Cardinality: 1
                                             16 INDEX RANGE SCAN NON-UNIQUE ADMABA.IDX_ABAPLANI_DET_SOL Cost: 3 Cardinality: 1
                                        19 TABLE ACCESS BY INDEX ROWID ADMABA.ABA_PLANIFICACION Cost: 1 Bytes: 15 Cardinality: 1
                                             18 INDEX UNIQUE SCAN UNIQUE ADMABA.PK_ABA_PLANIFICACION Cardinality: 1
                                   22 TABLE ACCESS BY INDEX ROWID ADMABA.ABA_USUARIO_DESPACHADOR Cost: 1 Bytes: 3,498 Cardinality: 53
                                        21 INDEX UNIQUE SCAN UNIQUE ADMABA.ABA_USUARIO_DESPACHADOR_PK Cardinality: 53
                              25 TABLE ACCESS BY INDEX ROWID OPS$NUCLEO.NUC_CODIGOS_FLEXIBLES Cost: 1 Bytes: 14,828 Cardinality: 337
                                   24 INDEX UNIQUE SCAN UNIQUE OPS$NUCLEO.NUC_CODFLEX_PK Cardinality: 337
                         28 TABLE ACCESS BY INDEX ROWID OPS$NUCLEO.NUC_CODIGOS_FLEXIBLES Cost: 1 Bytes: 1.037.828 Cardinality: 23,587
                              27 INDEX UNIQUE SCAN UNIQUE OPS$NUCLEO.NUC_CODFLEX_PK Cardinality: 23,587                Thanks in advance!
Edited by: user491853 on 21-ago-2012 15:29

A few comments looking at your sql query:
How much time the query is taking?
How many rows are there in the tables?
Make sure the stats are up-to-date.
Please kindly follow the instructions provided by others as well.
>
The version of the database is 8.1.7.4.0
>
Suggestion: Upgrade your version. Oracle Cost Based Optimizer is more smarter now.Upgrading will make your life much more easier as there are so many enhancements.
AND TO_DATE (TO_CHAR (ap.fecha_creacion, 'dd/mm/yyyy'), 'dd/mm/yyyy')
BETWEEN TO_DATE (NVL (:b8,TO_CHAR (ap.fecha_creacion, 'dd/mm/yyyy')),'dd/mm/yyyy')
AND TO_DATE (NVL (:b9,TO_CHAR (ap.fecha_creacion, 'dd/mm/yyyy')),'dd/mm/yyyy')Why are you using TO_DATE/TO_CHAR on a date column?
AND ap.centro_resultado = NVL (:b7, ap.centro_resultado)the same can be rewritten as below:
AND (ap.centro_resultado =:b7 and :b7 is not null) or :b7 is null This applies to other predicates you are using as well.
The table used in the plan is not found in your sql query eg NUC_CODIGOS_FLEXIBLES.
Regards
Biju

Unable to optimize album art on my iPod and then display the art on my iPod

When I optimize album art it gives me an error message "unknown error (-50)"
I would like to fix that. Any pointers?

get the order number from itunes account "Purchase History" & then send a mail to itunes store from following website. www.apple.com/support/itunes/ They will provide you exception to redownload because its Apple's problem

Maintenace Optimizer

Similar Messages

Maybe you are looking for