Maintenance Certificate for SAPNetweaver Trial

Does anybody now if it possible to obtain an Maintenance Certificate for SAPNetweaver Trial System?

Hi,
Check
https://websmp204.sap-ag.de/maintenancecertificate
I doubt that a trial system could have a maintenance certificate as it is not to be used as a long term system and so should not involve maintenance procedures.
Regards,
Paul

Similar Messages

Maintenance Certificate for NSP

Hi,
Does anyone know if we can request for maintenance certificate for NSP? I'm trying to upgrade to SP3 for NSP 7.01 to see and explore new updates.
Regards,
Iwan

Simple answer: no, it's not possible to get a certificate for trial systems. No SAINT nor SPAM possible.
Alternative: use one of the trial versions (now they are full Developer Editions) on Amazon AWS were Gateway and the UI Addons are already installed: Developer & Trial Editions: SAP NetWeaver Application Server ABAP and SAP Business Warehouse powered by SAP HANA

Maintenance Certificate through MOPZ

Dear All,
I want to renew my Maintenance Certificate through Service Marketplace and I already have requested Maintenance Certificate
for SRM 7.0 As (ABAP) and AS(JAVA).
As I am able to apply maintenance certificate for SRM 7.0 As JAVA,but not able to get the license of SRM 7.0 AS ABAP.
Is it possible to apply the Maintenance Certificate through MOPZ as I got Solman7.1 SP04 Installed in my System?
I already have gone through the Links below:
http://wiki.sdn.sap.com/wiki/display/SMP/LicenseKeyApplication+%28XX-SER-LIKEY%29
https://websmp209.sap-ag.de/~sapidb/011000358700001857722008E.pdf
Thanks & Regards
Ajitabh

Hi all,
Thanks for your replies.
I want to know one thing As I have applied the maintenance certificates for AS ABAP and AS JAVA of SRM 7.0.
As I got the certificate for JAVA and I have already applied it but still not getting certificate for ABAP.
I did it manually through SMP.
As I have checked in SOLMAN_WORKCENTER->>License Management->>As I can see Two columns as Maintenance Certificate and Received Maintenance Certificate.
While in Maintenance Certificate Column I am getting Yellow LED and in the Received Maintenance Certificate I am getting Green LED for SRM 7.0.I am Confused regarding this Certificate.
Kindly help me out.
Thanks & Regards
Ajitabh

Maintenance Certificate missed in license type

Hello everyone,
We are in the middle of the upgrade to our BW landscape from 3.5 to 7.01. After I upgraded our BWT system today and ready to apply support packages, as usual I go to apply maintenace certificate according to SAP's instruction on "How to Request a Maintenace Certificate manually through SAP support Portal". I found NO "maintenance certificate" under license type, only have "standard and Java" license type. It is very strange since I just applied "maintenance cerfiticate" on 5/15/2009 when I update support package for my BW sandbox (BWS)! Not sure why it is no longer there? Have you guys experience the same? And how can I get my maintenance certificate for my BWT system so I can move forward with my support package update?
Thanks for your help. This is very important since our upgrade is stopped now.
Yujun Ran

Hi,
What kesavan has mentioned above is perfect for manually applying the Maintainance certificates.
These certificates can be made to automatically distribute across the systems in the landscape.
refer to the below FAQ, and also to the below notes;
Note 1280664 - Distribution of maintenance certificates: Troubleshooting
When will a Maintenance Certificate be required by SAP's software logistics tools?*
Maintenance Certificate will be required for all customers as of January '09.
Details:
As of SPAM/SAINT- version 0034 the Maintenance Certificate will be required to import support packages. SPAM/SAINT- version 0034 will be released in January u201909.
All support packages released in 2008 can be applied using a SPAM/SAINT- version prior to version 0034 and therefore do not require a Maintenance Certificate. Hence, when using SPAM/SAINT- version 0034 or higher version, all support packages require a valid Maintenance Certificate in order to be imported.
Java support packages (imported using JSPM) will require a Maintenance Certificate in the near future. Currently a warning is displayed.
Which version of SAP Solution Manager will be required to benefit from automatic deployment of Maintenance Certificates?
SAP Solution Manager 7.0 SP 16 will be required to benefit from automatic deployment.
Regards,
Ravi
Edited by: Ravi Kumar on Jun 23, 2009 8:40 AM
Edited by: Ravi Kumar on Jun 23, 2009 8:44 AM

The maintenance certificate is visible for a system in the SAP Supportporta

Hi Guys,
We are using automatic distribution of maintenance certificates by SAP Solution Manager.
We are ok with prerequisites ( back. jobs , system data , SDCCN jobs etc.) but maintenance certificate is not being applied to the satellite systems.
report RAGS_MK_DISPLAY_FILE does not list down systems and neighter I can see maintenance cert. in SAP support portal.
Can somebody provide hint.
Best Regards,
Tushar

>
TusharC Chavan wrote:
> We are using automatic distribution of maintenance certificates by SAP Solution Manager.
>
> We are ok with prerequisites ( back. jobs , system data , SDCCN jobs etc.) but maintenance certificate is not being applied to the satellite systems.
>
> report RAGS_MK_DISPLAY_FILE does not list down systems and neighter I can see maintenance cert. in SAP support portal.
Hi Tushar,
Have you already checked this SAP Note with hints for trouble shooting?
[SAP Note 1280664 - Distribution of maintenance certificates: Troubleshooting|https://service.sap.com/sap/support/notes/1280664]
General information: http://www.service.sap.com/maintenancecertificate
Report RAGS_MK_DISPLAY_FILE and SAP Support Portal does not show any entries
==> That means, SolMan has not requested successfully Maintenance Certificates.
Hints for trouble shooting:
- check log of job REFRESH_ADMIN_DATA_FROM_SUPPORT
- check whether these SAP Note have been already applied. Both SAP Notes are linked in troubleshooting note.
1293657 - Error in distribution of Maintenance Certificates via SDCCN
1251060 - Error in requirement process of maintenance certificate
Good luck and best regards,
Ruediger

Getting error in distribution of Maintenance Certificate via SDCCN

Hello All,
While executing SPAU in ECC 6.0 I am getting error in distribution of Maintenance Certificate via SDCCN.
While I am trying to download note 0001293657 Fehler bei Verteilung von Wartungszertifikaten über SDCCN- I am getting error in distribution of Maintenance Certificate via SDCCN...Please suggest

Hi,
Check wheather your Maintenance certificate is valid or not.
For checking the same goto Slicense TCODE.
Thanks
Anil

Maintenance certificate

Dear All,
System not generation new Maintenance certificate.
In SDCCN of satellite system log of Maintenance Package job as below.
12.07.2009     20:30:42     Maintenance Package completed     /BDL/SAPLBDL11     0
12.07.2009     20:30:42      > Not due, due every 0 , last successful run 175430 20090702     /BDL/SAPLBDL11     0
12.07.2009     20:30:42     Get License Data from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
12.07.2009     20:30:42      > Not due, due every 7 day(s), last successful run 203050 20090709     /BDL/SAPLBDL11     0
12.07.2009     20:30:42     Refresh service definitions from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
12.07.2009     20:30:42      > Not due, due every 1 day(s), last successful run 203042 20090711     /BDL/SAPLBDL11     0
12.07.2009     20:30:42     Refresh sessions from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
12.07.2009     20:30:42      > Not due, due every 7 day(s), last successful run 203043 20090709     /BDL/SAPLBDL11     0
12.07.2009     20:30:42     Delete old session and log data :     /BDL/SAPLBDL11     0
12.07.2009     20:30:42      > Next periodic task 0000000089 has been created to run at 20090713202713     /BDL/SAPLBDL11     0
12.07.2009     20:30:42     Maintenance Package started     /BDL/SAPLBDL11     0
Please kindly help to resolve problem.
Regards,
Nikunj Thaker.

Dear David,
Thanks for reply.
Manually execute Get License Data in satellite system and log as below.
14.07.2009     10:51:41     Retrieval of license data completed from destination SM_SMNCLNT100_BACK     /BDL/SAPLBDL11     0
14.07.2009     10:51:41      > License data retrieved from Solution Manager and installed     /BDL/SAPLBDL11     0
14.07.2009     10:51:41      > Local system number: 000000000311082908     /BDL/SAPLBDL11     0
14.07.2009     10:51:41     Fetch license data from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
14.07.2009     10:51:41     Retrieval of license data started from destination SM_SMNCLNT100_BACK     /BDL/SAPLBDL11     0
After finishing above manually executed Maintenance Package in satellite syste and log as below.
         14.07.2009     10:52:41     Maintenance Package completed     /BDL/SAPLBDL11     0
         14.07.2009     10:52:41      > Not due, due every 0 , last successful run 105141 20090714     /BDL/SAPLBDL11     0
         14.07.2009     10:52:41     Get License Data from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
         14.07.2009     10:52:41      > Not due, due every 7 day(s), last successful run 203050 20090709     /BDL/SAPLBDL11     0
         14.07.2009     10:52:41     Refresh service definitions from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
         14.07.2009     10:52:41      > Not due, due every 1 day(s), last successful run 203042 20090713     /BDL/SAPLBDL11     0
         14.07.2009     10:52:41     Refresh sessions from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
         14.07.2009     10:52:41      > Not due, due every 7 day(s), last successful run 203043 20090709     /BDL/SAPLBDL11     0
         14.07.2009     10:52:41     Delete old session and log data :     /BDL/SAPLBDL11     0
         14.07.2009     10:52:41      > Next periodic task 0000000093 has been created to run at 20090715202713     /BDL/SAPLBDL110
         14.07.2009     10:52:41     Maintenance Package started     /BDL/SAPLBDL11     0
So still there is no difference in log of Maintenance Package after executing Get License Data.
Still i am not getting new maintenance certificate.
Regards,
Nikunj Thaker.

"Automatic Maintenance Certificate" is not updating satellite systems

Hi,
I want to activate Automatic Maintenance Certificate via solution manager to my satellite systems
Solution Manager is 7.01 at SPS23
Satellite systems are all on Netweaver 7.01 SPS06
Right now, Solution Manager receives automatically the maintenance certificate.
Unfortunately, my satellite systems do not receive it.
on my satellite system (PRD - ECC 6.04), in SDCCN, I see that job "Maintenance Package" shows these messages:
Maintenance Package completed
Updating license data completed from destination [Maintenance Package]
No active master Solution Manager destination maintained. [Maintenance Package]
Updating license data not possible [Maintenance Package]
note that I reviewed completely SAP note 1280664 to no avail.

Hi Daniel,
This is exactly the solution.
I finally also found another solution from http://forums.sdn.sap.com/post!reply.jspa?messageID=9122507#9122507
In managed system, goto SDCCN, browse through the menu options to reach task specific settings and then edit the RFC destination settings.
In RFC settings you get to see RFC of SM system.
Make the SM destination as master destination. Tick the Master checkox.
Thanks for your help.

SAPKB70104 No queue calculation because of a missing maintenance certificat

Dear SDNites,
I have recently installed ERP6,EHP1 on Linux with DB29.7 for our Sandbox env'.
I am trying to update the SAP patche level for ABAP and BASIS from release-701,level03,patch SAPKA/B70103 to SAPKA/B70106.
My current SPAM level is 7.01/39. When I am trying to calculate the queue after display/define, it thorws an error as follows..
"SAPKB70104 No queue calculation because of a missing maintenance certificate "
My question, as I am using the latest SPAM version..still do I need to have the maintanance certificate in place...?
Pls help me in this regard
Thanks in advance
Venu

Hello Venu,
the fact of running the last/next-to-last version of SPAM is not directly related to the error you're facing.
Besides note #1240265 that Karan Singh suggested, you can request a Maintenance Certificate manually through the SAP Support Portal.
https://websmp209.sap-ag.de/~sapidb/011000358700001504082008E
I hope this information helps.
Best regards,
Tomas Black

ACE maintenance page for HTTPS connection (non offloaded mode)?

Hello experts
how do we configure a "redirected" maintenance page for HTTPS Serverfarm when the serverfarm is down/probefailed?
lets say users are accessing https://xyz.com, and if the serverfarm is down, I want users to get redirected to https://abc.com or even http://abc.com
(getting a certificate error or a https to http redirection error is acceptable)
What i understand from TAC, since we are not terminating SSL on ACE, we have few restrcitions on using redirect. Thereafter, TAC hasnt been too helpful on this query.
HTTPS connection is directly terminated on Server with certificate. And we are using SSL Session Stickyness on ACE (I know not the best thing to do..)
Pls. assist.

so do i assume there is no way to do this without using ACE for SSL termination?
In our case, not using ACE for termiating SSL connections is to draw a line between Network and System administration, a business requirement.
Thanks for your replies.

Ssl certificates for a clustered environment

Hi all,
I have a rather large domain in one environment with one Admin Server and 6 Managed Servers.
The Managed Servers are split on two physical machines with the first machine holding the Admin Server as well.
Each pair of servers is joined in a cluster, so I have 3 clusters, each hosting one application.
Now some of the communication needs to be done over ssl and I'm wondering about the configuration. First of all I should
note that these certificates won't be seen by a client (browser), they will only be used for internal application communication.
So, do I need one certificate for each managed server for his identity keystore? Or can I use the same certificate for all of them?
They will all be accessible under the same url, under a couple of layers of routers. If I use the same certificate can I use the one on the
router, which the clients see as well? Can I or Must I?

You only need to tell nodemanager where to find its certs. If you've already chosen SSL for your nodemanager, then by default it uses the democerts that come with WL. But you really don't want to use those...
So in your nodemanager properties, use something like:
# SSL Configuration
KeyStores=CustomIdentityAndJavaStandardTrust
CustomIdentityAlias=your_cert_alias
CustomIdentityKeyStoreFileName=full_path_to_your_identity_keystore_used_by_your_mgd_server
CustomIdentityKeyStorePassPhrase=your_storepass
CustomIdentityKeyStoreType=jks
CustomIdentityPrivateKeyPassPhrase=your_keypass
This tells your nodemanager to use the same identity as your managed servers. Since it's using java standard trust, it shares the same "cacerts" as the app server. In the console, your Machine -> Configuration -> Node Manager -> Type would be SSL.
So that would be all that's required for the nodemanager.
In your trust keystore, you can just add the signer / root ca cert for your certs, or you can add the individual server certs if you want to restrict the trust a little further. Normally identity certs expire more frequently than root certs, so I don't put identity certs into the trust store since it just means more maintenance when they expire.

Problem winth install Maintenance certificate

Hello A have a problem with the Maintenance certificate, I genered the certificate but enthe end of de row there is this message:
Limited license requested
I upload this certficate in the backend (t-code: slicense) and the result in the signal red and says on Note on Validity: Not yet valid
In this link Limited license requested says:
License keys for mySAP Business Suite
Additional Documentation
The license key you requested could only be granted for a limited time, for the following reason:
Restricted license key requested
You requested a restricted license key for your system. If you need an unrestricted license key, please request a new, unrestricted license key for the same system under this installation.
I regenerated the certificate but the resul is the same, I don`t know How can I request a new, unrestricted license key for the same system under this installation.?
thanks for your help

HI Naresh
I did these steps and I upload the license in backend but the message says: 2 licenses succesfull installed then in the list of license
there are two red trafic light
ITP Q1851760771 NetWeaver_DB6 11.08.2009 31.12.9999 Perm 0020310707 000000000310985405 Not yet valid
ITP Q1851760771 Maintenance_DB6 11.08.2009 12.11.2009 Perm 0020310707 000000000310985405 Not yet valid
I don`t know what`'s the problem?
any suggestion
Regards
Danny
Edited by: Graciela Troya on Aug 13, 2009 12:35 AM

Maintenance certificate Renew

Hi,
I cannot renew the maintenance of certificate. When I go to the request a new valid maintenance is not avalaible for to keep.
What can i do? I can´t to validate a patch queue.
More thanks

Hi,
check below guide to check how you can generate maintenance certificate from solman or manually from SMP:
http://www.easymarketplace.de/Maintenance-Certificates.pdf
Thanks
Sunny

Maintenance Certificate   Update

Hi,
    I added my development system in solution manager (Through SMSY).I want to configure every 3 months maintenance certificate will be update in development system through solution manager,is it possible,if any one plz guide me to do step by step.
Thanku

Hi,
    Thnaks for response,I am trying to distribute maintenance certificate automatically in solman for the satelite systems.
In the IMG choose the following path: SAP Reference IMG -> SAP
Solution Manager -> Configuration -> Scenario-Specific
Settings -> Change Management -> Node text not found ->
Activate Automatic License Data Distribution.
But I could not find this path in SPRO. So, Where should I activete the automatic distribution. And also please provide the steps needs to be followed both the solman and saltelite systems to automatically distribute the maintenance certificate.
Mine patch level is -- ST - 400 - 0018 .
Mine is job : REFRESH_ADMIN_DATA_FROM_SUPPORT successfully finshing.
guide me for the same to proceed.
Thnaku

Looking for help to update the certificate for my Exchange Email Account...

I'm trying to update the certificate for my Exchange Email Account...Dell had me delete the account, install the new certificate on my phone, and set up the email again...But it still won't work and acts like it can't find/use the new cert. Any suggestions besides a hard resest of the phone?

That's a great question, LSchmitz!
Is the e-mail account on your cell phone? Which device? If its on your phone, an Exchange e-mail, may need to be provisioned/ set up by your employer/ IT department.
VanessaS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Maintenance Certificate for SAPNetweaver Trial

Similar Messages

Maybe you are looking for