Maintenance Dialog is missing or not maintaned

Hey...I am new in ABAP. I created a function group in dev environment and this function group consists of a database table with maintenance view and it has a transaction code. After I transport into quality environment, when i execute the the transaction code, it said that the maintenance dialog for the table is missing and not maintaned, when i checked the transport request is successful without any error. I am not sure what is the problem, Anyone can help? Thanks

Hello
Maintenance views consist of the DDIC objects and  a couple of entries in SAP standard tables. If these entries are not transported to the next system you will get the error message as described.
To ensure complete transport of your maintenance view
1) call transaction SE54,
2) enter your maintenance view (description should be table/view) and
3) choose menu Utilities -> Total Transport
This will result in a complete transport request for your maintenance view.
Regards
  Uwe

Similar Messages

  • Maintenance Dialog for V_T7INDA_OFFGRP does not exist

    Hi Friends,
    I have tried to enter the values in the view V_T7INDA_OFFGRP, but I am
    getting a message, that 'Maintenance Dialog for V_T7INDA_OFFGRP does
    not exist'.
    When I went to se54 to create the Maintenance Dialog, I am not able to
    see the View V_T7INDA_OFFGRP in the funtion group HRPBSINDA_DDIC.
    Can you please help me how I can creat the Maintenance Dialog for this
    view.
    Thanks,
    Suresh Kumar Paturi

    Procedure compiles OK if I replace
    SELECT hsecs INTO pseudoRandomSeed FROM V$TIMER;
    by
    pseudoRandomSeed := DBMS_UTILITY.GET_TIME;
    I still would like to understand the reason of the error as why the procedure cannot compile with SELECT hsecs INTO pseudoRandomSeed FROM V$TIMER;
    Thanks

  • The maintenance dialog for V_AISUSER is incomplete or not defined

    I was not able to assign S-user for SAP Support Portal functionality from SPRO.  I received this error and my ABAPer didn't seem to able to help...would anyone ever got this error message and/or know how the resolution?
    The maintenance dialog for V_AISUSER is incomplete or not defined
    Message no. SV037
    Diagnosis
    The called function with the view/table V_AISUSER needs a special maintenance dialog which, however, either does not exist at all, or does not exist completely.
    System Response
    The called function cannot be performed.
    Procedure
    Generate the required maintenance dialog.
    Thank you in advance for your assistance.
    Regards,
    Franc

    Hi Nesimi,
    I wasnot able to maintain the "assign S-user fro SAP Support Portal functionality" by drilling down the following path from SPRO>SAPSolMan>Configuration>Basic Settings>Standard Config of Basic Settings>SolMan>Connection to SAP-->Assign S-user for SAP Support Portal functionality.
    I have to follow the following path to maintain Table "AISUSER" = SPRO>SAP SolMan>Config>Scenario-Specific Settings>Service Desk>Service Provider SW Partner>Maintain Table AISUSER.
    What's a ditto...
    Thank you again for your time.
    Cheers,
    Franc Nguyen

  • The maintenance dialog for J_2IVLYCTR is incomplete or not defined

    Dear experts,
    In transaction code J2I7 following error is appering
    The maintenance dialog for J_2IVLYCTR is incomplete or not defined
    Regards,
    ABHIJEET JOSHI

    Hello,
    This depends on the version and release level, Please check this veiw of J_2IVLYCTR . If these below given entries are not their then
    MANDT     MANDT     CLNT     3     Client
    BUKRS     BUKRS     CHAR     4     Company Code
    REGISTER     J_2IREGSTR     CHAR     10     Register name
    LAYOUTNR     J_2ILAYNR     NUMC     3     Layout number
    LAYOUTNAME     TDFORM     CHAR     16     Form Name
    LAY_DESC     J_2ILAYDES     CHAR     64     Layout description
    PROGRAME     PROGRAM     CHAR     40     Program/transaction in SQL trace analysis
    ROUTINE     J_2IROUTIN     CHAR     30     Form routine
    NOOFCOPIES     J_2INOCOPI     NUMC     3     No. of copies
    OUTDEVICE     RSPOPNAME     CHAR     4     Spool: Output device
                                                                                    if not available add these entries in above mentioned table  and check J1I7 tcode.
    Regards
    Mahesh Naik.

  • Error : Maintenance dialog for ztable is incomplete or not defined

    Hi Gurus
    While maintaining the ztable through SM30 got the following error.
    Maintenance dialog for ztable is incomplete or not defined
    I have to add new enteries in the previously created ztable.
    Please suggest
    Manvir

    Go to SE11, give the table name and click on change. Then Go to utilities--> Table
    maintenance generator.
    In the table maintenance generator screen, we should give Authorization Group,
    Function Group name (Function Group name can be same as table name),
    Maintenance type can be one step or two step, usually we will create with one
    step. we should give maintenance screen number. After clicking on create button,
    a table maintenance generator will be created.
    To check it go to SM30 . In SM30, we find display, Maintain options.
    We can view the table contents by choosing Display and we can create table
    entries by choosing Maintain.

  • The maintenance dialog  for SM 30

    Hi i am maintaining a table through SM30. and i have used one display field in transaction for that table. when i am entering data through transaction that disply is getting displayed when i press ENTER. but when maintaining through SM30 thet display Maintanance dilog Incomplte,
    then i went tbel maintanance and create ,but it doesnt save
    please help me
    This is the  error i am getting'
    <b>The maintenance dialog for ZFT017_GLCST_TR is incomplete or not defined</b>
    kanishka

    Hi,
    there is a prob in Table maintenace Generation Cretaion.
    se11> table name> change.
    Menu- utilities- table mauintenace Gen .
    Give Authorisation Grp and Funct Group.
    Single Step
    Provide Screen No.
    Then Assigning the tCODe.
    Se93.
    In this U shud give TABLE VIEW :    TABLE NAME.
                              UPDATE       : X  <----
    Ensure This u have given.
    Rvert Back if any issues,
    Reward with points if helpful.
    regards,
    Naveen

  • Maintenance dialog for table

    Hello folks,
    I had successfully created a table and I tried inserting some records in to the table using table maintenance.
    I received the following error.
    'The maintenance dialog for table zxxx is incomplete or not defined'.
    What does this mean?? And what should I do??
    I am pasting the detail help over this error.
    The maintenance dialog for ZTV_DBS_RANGE_NO is incomplete or not defined
    Message no. SV 037
    Diagnosis
    The called function with the view/table ZTV_DBS_RANGE_NO needs a special maintenance dialog which, however, either does not exist at all, or does not exist completely.
    System Response
    The called function cannot be performed.
    Procedure
    Generate the required maintenance dialog.
    Please help

    You have to create the maintenance dialog for table you would like to use with transaction SM30 / SM31.
    To do this look the transaction SE55.
    (or SE11, select the table, MODIFY, (menu) Utilities -> Maintain dialog ... )
    Regards
    Frédéric
    Message was edited by: Frédéric Girod

  • Problem with a maintenance dialog for a table

    Hi,
    I created a table (ztable) with transaction code SE11 and a transaction (ztransaction) with SE93 to manage this table (ztable).
    When I use the transaction "ztransaction", I have a message like this :
    "The maintenance dialog for ZTABLE is incomplete or not defined".
    What can I do ? How can I complete or define the maintenance dialog ?
    Thanks in advance.
    Regards.
    C.

    First after creating a table you should creat a Table maintenance generator.
    Utilities -> Table Maintenance Generator .
    After creating Maintenance goto
    Environment -> Transaction
    This will succesfully create a transaction for your table
    You should give parameters while creating the transaction.
    UPDATE = 'X'
    VIEWNAME = your table name
    Bhupal

  • Adding F4 help to a field in a table maintenance dialog

    I have used SE54 to create a maintenance dialog for my table. I need to be able to use F4 in a field in the maintenance dialog that will read several values that have been entered into the table (in the same row) but not yet saved and then execute an SAP delivered function module that will present the user with valid selections based on the data input.
    I am somewhat familiar with events and modifications in SE54 but I am struggling with how to implement this.
    Thanks for your help
    Corwin Slack

    Hi Corwin,
    You can have Process on Value-Request on your screen where the field exist. You can use SE80 to edit the screen of the function group that table maintenance generator created.
    1. Edit the screen using SE80.
    2. Place a 'process on value-request' at the bottom of the flow logic.
    3. Below that, put this line
    field fieldname module get_help.
    4. Double click on GET_HELP and create an input module pool program.
    5. In this module pool, pass the values of the other fields in your screen to the function module that can provide you the list of values
    6. Use function module F4IF_INT_TABLE_VALUE_REQUEST within this module pool to popup the values.
    However, please keep in mind that the values from other fields on the screen are not populated in its field unless you hit enter.

  • View maintenance dialog

    Hi all,
    I am facing an issue in view maintenance dialog, during UCCHECK, it is showing as error with description as follows:
    Generated Code for View Maintenance Dialog is not Unicode-Compatible You can
    regenerate with the program RSVIMT_UC_VIEW_MAINT_GEN
    I am still doubt. What is the impact if I generate it as proposed? Are our own coding removed after generation? Thus we need to code manually again.
    Thanks !
    Chika

    It seems that you're in the Unicode system and the dialog is not Unicode compatible. This program will not remove any code, as long as it has been added using the proper methods (user exit, designated enhancement, etc.). In the worst case it will display an error message.
    You might want to check in advance whether your code is Unicode compatible though.

  • Photoshop Elements #11 dialog screen missing

    I AM UNABLE TO OBTAIN THE SCREEN THAT HAS THE ADVANCED DIALOG BOX ON THE LOWER LEFT HAND CORNER SO THAT I CAN STATE NAME OF CREATOR, COPYWRIGHT ETC.    I have had PS Elements since #1, and never had this problem.'    Yes, I have gone into Preferences and can set download option, but cannot get the screen I have just described.     PLEASE HELP ME

    HI,
    This still does not work.  I have tried to correct this several times 
    before by doing just what you suggest, but it does not work.   I click  on "APD
    Advanced Dialog", and it still does not appear when I load my  compactflash
    card.    This also DOES NOT bring up the  Advanced Dialog box where I can
    select either advanced or regular  etc.   Something is seriously wrong with
    this edition of Photoshop  11.   I also tried to acces the link you sent, and
    I cannot open  it.  - ???????
    We still have a problem that is not fixed.
    I still await your phone call either tomorrow (Friday) or Monday.
    Regards,
    Dave Pidcock
    David E. Pidcock
    VisionQuest Enterprises
    VisionQuest  Photography
    405 27th Avenue N.E.
    Great Falls, MT 59404
    (406)  727-2466
    [email protected] 
    In a message dated 2/21/2013 7:30:12 P.M. Mountain Standard Time, 
    [email protected] writes:
    Re:  Photoshop Elements #11 dialog screen missing
    created by andaleebfatima1
    (http://forums.adobe.com/people/andaleebfatima1)  in  Photoshop Elements - View the full  discussion
    (http://forums.adobe.com/message/5083732#5083732)

  • Maintenance dialog with Number Range Object

    Hello Experts,
    i want to create a maintenance dialog with some fields for maintain a db table. In this field i have a id. This i should increment automatically like a Number Range Object. How can i do this.
    E.g.
    id    name
    1    manfred
    2    steve
    When i will write a new name i only want to write the name not the id. The id should be the 3 in this case automatically. Can anybody say how i can do this?
    Regards
    Chris

    I would guess you can create a number range object and then use the NUMBER_GET_NEXT FM to get the next number as part of your event (before saving like event 01 or other events as per your requirement) ...
    Check out the following links which talks about making field READ only
    HOW TO MAKE FIELDS AS READ ONLY IN TABLE MAINTAINANCE
    and also the wiki entry on table maintenance
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=93454609

  • Suppress dialog box for font not found

    using VB I open AI and load ai files and send commands to save them in several image types, there are times that a dialog box stating Font not found with OK Cancel button appears. I need to suppress this dialog so my program does not hang. any advice will be highly appreciated. Thanks
    Medallo

    You cannot suppress this warning. Every time you open a document Illustrator will let you know that you do not have the font on your computer or is not active.
    The reason of this warning is because the layout may change, words or symbols could disappeared, etc. This warning cannot be ignore. If you do not have the font, you have to assigned a new font and make sure that the artwork is correct and nothing is missing.
    I hope this helps!

  • I got a new computer, told it library was on external hd, no problem.  A lot of artwork was missing though (NOT manual artwork, only previous artwork I'd asked itunes to find). I ran 'get artwork' but it's only asigned artwork to the1st song in each album

    So, I got a new computer.  As my itunes library has gone through a few in its time, it lives permanently on my external hard drive, as this generally makes moving to new computers hassle free.  I told my freshly intsalled itunes on my new computer where to find the library and it got all my songs, movies etc no problem.  However, some albums were missing artwork (NOT any of the albums I had ever manually added artwork to, thank god, these all seemed to be intact, jut ones where itunes had previously got artwork for me).  I asked itunes to get missing artwork, as is par for the course.  This it did, but it has only installed artwork for one song per album (generally the first song, or the lowest numbered track for incomplete albums, as far as I can tell). 
    It does not acknowledge these songs as missing artwork when I create a smart playlist but, erm, they are - the artwork doesn't show up on the display in the bottom LH corner or in the info tab.  WHY?  When I've added new albums 'get artwork' has always added artwork for EACH song on the album in every previous itunes I've ever had.  I don't get it at all. 
    I appreciate it might be irreperably messed up, but please don't reply with any manual adding solutions.  I have over 25,000 songs in my library and to go through and manually ask itunes to add artwork to each song (apart from the first on the album which already has it) would take SO LONG it makes me want to die inside. 
    I can't find anything else on this.  Other people have had issues with itunes match and devices, but these songs don't even have artwork on itunes, let alone on my ipod, iphone etc.

    Well my first guess was wrong. The line that failed is the one that writes out the image to disk. I've not revisited the code for that script for ages, but it seems I did add in an extra test for missing files a little while later, then forgot to upload the change. I can reproduce the error message if I deliberately rename a file to confuse iTunes so that seems the most likely reason for your problem with the script. I've uploaded a new build of CreateFolderArt which should work better.
    See FindTracks for a tool to repair broken links. You should probably get that issue fixed first.
    I know what SPSS stands for but that is all I know about it.
    tt2

  • How can I get missing contacts, notes, calendar dates and reminders that are just on my old iphone onto the iCloud for transfer to my new iPhone upgrade?

    Dear wise & wondeful people:
    How can I get missing contacts, notes, calendar dates and reminders that are just on my old iphone onto the iCloud for transfer to my new iPhone upgrade? Half of my contacts, notes, ect. were on my iCloud so have happily moved to my new iPhone but the rest are completely resistant. For example, on my iCloud I have 14 missing contacts starting with the letter A alone, however they are happily viewable on my old iPhone 4S and won't budge over into the iCloud.
    There are also 3 notes missing yet still acessible on my onld iPhone 4S, the list goes on.
    Your help would be most appreciated. Thank you so much.
    BCHR

    Hi BCHR,
    If you are having issues transfering your content from your old iPhone onto iCloud so it can be transfered to your new iPhone, you may find the following articles helpful:
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
    http://support.apple.com/kb/HT2109
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/TS3998
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/TS3999
    iCloud: Notes overview
    http://support.apple.com/kb/PH12081
    Regards,
    - Brenden

Maybe you are looking for