Maintenance Optimizer - Activate Switch Framework

When I calculate in mopz the packages the system writes, that I must activate the switch framework in the satellite system.
Whitch framework does it means?

In order to make a correct auto-calculation when customer has SAP ERP 6.0 -ECC server instance installed. MOPZ try to get the active switch framework information.
So, it's not mandatory to maintain the RFC for all product systems in SMSY that you run MOpz trasaction for. It's only mandatory for product system with PV SAP ERP 6.0 and instance ECC server.
If you have active switch frame work for this ERP system while MOPZ can't get this information by valid RFC. The calculation is not correct then.
That's why MOPZ import this new error RFC destination is not available to get switch framework information! Message no. MOPZ_CHECKS237
To deactivate the RFC check for ERP, is not recommended by SAP!
In order to bypass the RFC destination check, you can set the user profile parameter "VALIDATION_MODE" with value "X"
You can reactivate the RFC check easily when you find you need it. Delete the user profile parameter "VALIDATION_MODE" with value "X"

Similar Messages

Solution manager maintenance optimizer

Hi all,
I have what I think is an issue, and hoping someone could possibly point me in the direction to correct. I have setup our solution manager system and trying to get the maintenance optimizer option working fully. I have a java system that I pull the information from SLD perfectly fine, and it lists all installed software components via SMSY>SYSTEMS perfectly. I have assigned logical components etc. I can create a new maintenance optimizer transaction, select the proper system with assigned components, but when it lists the files to be downloaded automatically I expect to see alot more files available for download than it lists for me. I assume I am missing something, but not sure where to look.
Would anyone be able to possibly point me in the right direction on what I might be missing?
Regards,
Chris

Hi Markus,
The system is SAP EHP1 for SAP Netweaver 7.0. It has the following components installed and specified in logical components:
Adobe Document services
Application server Java
EP Core
Enterprise Portal
Along with the kernel files I also get the following files available for download via maintenance optimizer (6 in total)
FORUMS06_0-10005892.SCA SP06 for FORUMS 7.01
BP_PROJ_PORT_DESIGNCOLL
BPPPMDC17_0-10003174.SCA BP PROJ., PORT. & DCOL. 4.0 SP17
BP ERP05 PROJ SELF-SERV
BPERP5PSS17_0-10003284.SCA BP ERP05 PROJ SELF-SERV 1.0 Support Package 17
BP ERP05 MAINTENANCE TECH
BPERP5MTC07_0-10004455.SCA SP07 for BP ERP05 MAINTENANCE TECH 1.2
BP ERP SITE TECHNICIAN
BPIS7TST07_0-10004458.SCA SP07 for BP ERP SITE TECHNICIAN 1.20
BP ERP ICM ANALYST
BPIS7ICMAL06_0-10006119.SCA SP06 for BP ERP ICM ANALYST 1.41
When I look at installed system components via SMSY it correctly shows everything installed which includes:
ADOBE DOCUMENT SERVICES 7.01 0006 SP006 ADOBE DOCUMENT SERVICES 7.00
BI BASE SERVICES 7.01 0006 SP006 BI BASE SERVICES 7.01
BI INFORM. BROADCASTING 7.01 0006 SP006 BI INFORM. BROADCASTING 7.00
BI META MODEL REPOSITORY 7.01 0006 SP006 BI META MODEL REPOSITORY 7.01
BI REPORTING AND PLANNING 7.01 0006 SP006 BI REPORTING AND PLANNING 7.01
BI UNIVERSAL DATA INTEGRATION 7.01 0006 SP006 BI UNIVERSAL DATA INTEGRATION BI UDI 7.01
BI WEB APPLICATIONS 7.01 0006 SP006 BI WEB APPLICATIONS 7.00
BI WEBDYNPRO ALV 7.01 0006 SP006 BI WEBDYNPRO ALV 7.01
BP ERP FIN MDM 1.40 0006 SP006 BP for Financial MDM 1.40
BP ERP HR EIC 1.40 0006 SP006 BP für HR Employee Interaction Center 1.40
BP ERP ICM ANALYST 1.41 0004 SP004 BP for ICM-Analyst 1.41
BP ERP RECRUITER 1.40 0006 SP006 BP for Recruiter 1.40
BP ERP RECRUITING ADMIN 1.40 0006 SP006 BP for E-Recruiting Administrator 1.40
BP ERP SITE TECHNICIAN 1.20 0006 SP006 BP for Site Technician (Telecommunications) 1.20
BP ERP UT XSS 1.40 0006 SP006 BP ERP UT Definition für Self Service BP 1.40
BP ERP05 BUS UNIT ANALYST 20 1.0 0017 SP017 BP for Business Unit Analyst (mySAP ERP) 1.0
BP ERP05 COMMON PARTS 1.41 0006 SP006 BP ERP05 COMMON PARTS 1.41
BP ERP05 ESS 1.41 0006 SP006 BP for Employee Self-Service 1.41
BP ERP05 HR ADMINISTRATOR 1.41 0006 SP006 BP for HR Administrator (mySAP ERP) 1.41
BP ERP05 MAINTENANCE TECH 1.2 0006 SP006 BP for Maintenance Technician 1.2
BP ERP05 MSS 1.41 0006 SP006 BP for Manager Self-Service 1.41
BP ERP05 PROJ SELF-SERV 1.0 0016 SP016 BP for Project Self-Service (mySAP ERP) 1.0
BP ERP05 SELF-SERV ADMIN 1.0 0017 SP017 BP for Self-Service Administrator (my SAP ERP) 1.0
BP ERP05 TALENT DEV 1.01 0010 SP010 BP for Talent Development Specialist 1.01
BP_PROJ_PORT_DESIGNCOLL 4.0 0015 SP015 BP for Project Portfolio Management and Design Collaboration 4.0
CAF EU 7.01 0006 SP006 SAP Net Weaver End User 7.01
DI BUILD TOOL 7.01 0000 SAP BUILD TOOL 7.01
DI CHANGE MANAGEMENT SERVER 7.01 0006 SP006 CHANGE MANAGEMENT SERVER and SXMAN 7.00 701
DI COMPONENT BUILD SERVER 7.01 0006 SP006 COMPONENT BUILD SERVER 7.01
DI DESIGN TIME REPOSITORY 7.01 0006 SP006 DESIGN TIME REPOSITORY 7.01
FORUMS 7.01 0005 SP005 FORUMS 7.01
J2EE ENGINE BASE TABLES 7.01 0006 SP006 BASETABLES
J2EE ENGINE CORE TOOLS 7.01 0006 SP006 CORE TOOLS J2EE ENGINE
JAVA LOG VIEWER 7.01 0006 SP006 SAP JAVA LOG VIEWER 7.01
JAVA SP MANAGER 7.01 0006 SP006 JAVA SP MANAGER 7.00
KMC BASE COMPONENTS 7.01 0006 SP006 KMC BASE COMPONENTS 7.01
KMC COLLABORATION 7.01 0006 SP006 KMC COLLABORATION 7.01
KMC CONTENT MANAGEMENT 7.01 0006 SP006 KMC CONTENT MANAGEMENT 7.01
KMC UI LAYER 7.01 0006 SP006 KMC UI LAYER 7.01
KMC WEB PAGE COMPOSER 7.01 0006 SP006 KMC WEB PAGE COMPOSER 7.01
LIFECYCLE MGMT PORTAL 7.01 0006 SP006 LIFECYCLE MGMT PORTAL 7.01
LIFECYCLE MGMT TOOLS 7.01 0006 SP006 LIFECYCLE MGMT TOOLS 7.01
MI ADMINISTRATION 7.01 0006 SP006 MI ADMINISTRATION 7.01
MI DRIVERS 7.01 0006 SP006 MI DRIVERS 7.00
MI WD LAPTOP 7.01 0006 SP006 Net Weaver Mobile Infrastructure Web Dynpro LAPTOP 7.00
PDK PORTAL SERVICES 7.01 0006 SP006 PDK PORTAL SERVICES 7.00
PORTAL CORE SERVICES 7.01 0006 SP006 EPBC 7.01
PORTAL FRAMEWORK 7.01 0006 SP006 EPBC2 7.01
PORTAL PLATFORM 7.01 0006 SP006 EP - Portal Server PORTAL 7.01
PORTAL WEB DYNPRO 7.01 0006 SP006 PORTAL WEB DYNPRO 7.01
RTC 7.01 0006 SP006 RTC 7.00
RTC-STREAM 7.01 0006 SP006 RTC-STREAM 7.00
SAP CAF 7.01 0006 SP006 SAP CAF 7.01
SAP CAF-KM 7.01 0006 SP006 SAP CAF-KM 7.01
SAP CAF-UM 7.01 0006 SP006 SAP CAF-UM 7.01
SAP CPS BASIC (SCHEDULER) 7.01 0004 SP004 Job scheduling capabilities of SAP NetWeaver 7.01
SAP ESS 603 0006 SP006 SAP ESS 603
SAP INTERNET KNOWLEDGE SERVLET 7.01 0006 SP006 SAP Internet Knowledge Servlet 7.00 (SAP J2EE IKS)
SAP J2EE ENGINE 7.01 0006 SP006 SAP J2EE Engine 7.01
SAP J2EE ENGINE CORE 7.01 0006 SP006 SAP J2EE ENGINE CORE 7.01
SAP JAVA TECHNOLOGY S OFFLINE 7.01 0006 SP006 SAP JAVA TECHNOLOGY S OFFLINE SAP TECH S OFFLINE 7.01
SAP JAVA TECHNOLOGY SERVICES 7.01 0006 SP006 SAP JAVA TECHNOLOGY SERVICES (Schicht 3 Dummy) SAP JAVA TECH SERVICES
SAP MI CLIENT 7.01 0006 SP006 SAP Mobile Infrastructure Client 7.0
SAP MSS 600 0017 SP017 SAP MSS 600 (Manager Self Services)
SAP PCUI_GP 603 0006 SP006 SAP PCUI_GP 603
SAP SOFTW. DELIV. MANAGER 7.01 0000 SAP JAVA SL 7.01
SOFTWARE LIFECYCLE MANAGEMENT 7.01 0006 SP006 SOFTWARE LIFECYCLE MANAGER 7.01
UME ADMINISTRATION 7.01 0006 SP006 UME ADMINISTRATION 7.01
UWL COLL PROCESS ENGINE 7.01 0006 SP006 UWL COLL PROCESS ENGINE 7.01
VISUAL COMPOSER BASE 7.01 0006 SP006 VISUAL COMPOSER BASE 7.00
VISUAL COMPOSER BI KITS 7.01 0006 SP006 VISUAL COMPOSER BI KITS 7.00
VISUAL COMPOSER FLEX 7.01 0006 SP006 VISUAL COMPOSER FLEX 7.00
VISUAL COMPOSER FRAMEWORK 7.01 0006 SP006 VISUAL COMPOSER FRAMEWORK 7.00
VISUAL COMPOSER GP KITS 7.01 0006 SP006 VISUAL COMPOSER GP KITS 7.00
VISUAL COMPOSER XX KITS 7.01 0006 SP006 VISUAL COMPOSER XX KITS 7.00
WEB DYNPRO EXTENSIONS 7.01 0006 SP006 WEB DYNPRO EXTENSIONS 7.01
I expect to see more than the 6 previously mentioned files available for download, also the option for EHP2 which I know is available, or am I wrong in expecting this.

Problem with activating Maintenance Optimizer

I have reached the final stage of the configuration of the maintenance
optimizer. I have implemented all of the required notes in the MOPZ
collective note 1024932 (Notes 1008717 - HMTLViewer: Postdata of
length more than 255 gets truncated, (note 950975 is n/a for my system
we have SAPGUI 7.1), Note 975510 - Corrections for calls/interfaces
implmented incorrectly, and 1004691 - SNOTE:
OBJECTS_OBJREF_NOT_ASSIGNED when you implement a note, and the strongly
recommended note 997780 - Maintenance Optimizer: Checks that should
not be executed.
When I try to run the report SM_PREP_MAINTENANCE_OPTIMIZER after
implementing note 990534, I get the following error:
For object SOLAR, no sub-object SOLMAN_CONFIG is maintained
Message no. BL011
Diagnosis
An application log entry is to be made for sub-object SOLMAN_CONFIG of
the object SOLAR. This sub-object is, however, not maintained for
object SOLAR.
Objects and subobjects of the application log are created using
transaction SLG0.
System Response
The program had to be cancelled.
Procedure
Inform the system administrator
I have verified all of the steps in the document "Step by Step
Configuration of the Maintenance Optimizer". I have also done the
basic IMG settings under Solution Manager in the IMG. I did not
do "Activate integration with the Change Request Management". We are
not using Change Request Management.
Has anyone seen this type of message before? I could do the BC Sets manually but I want to use the report.

Thanks Lars. I opened a ticket with SAP and it looks like you can ignore this:
Hello,
You can ignore the message. It is displayed because when the report
runs we try to write the log to the sub-object SOLMAN_CONFIG, which does not exists with Support Package 9, due to it you get the message.
Regarding the 02 options to configure the Maintenance Optimizer it
just occurs becasue the report was not available with Support Package
9 of SAP Solution Manager, however due to the increasing number of
customers that required an easier configuration for the Maintenance
Optimizer we decided to make the report available through the note.
So there is not difference between the 02 configuration options.
The report does exactly the steps described in the alternative
configuration.
I'll give you full points!!

Problem with Maintenance Optimizer after first step

Hi all,
I have problem with Maintenance Optimizer after I choose system and save transaction, I click on Continue button, but nothing happens....
Any ideas?
Regards,
Lazar Hristov

I resolved my problem.
I activate from spro -> Initial Configuration II, then activate BC Set for mopz and now everything works fine.
Regards,
Lazar Hristov

Solman setup maintenance optimizer

Hi all,
I'm trying to setup my Solman Maintenance Optimizer to download SP.
When I read the configuration guide. It says the prerequisite is as below :-
The Maintenance Optimizer contains a lot of scenarios for maintenence procedures. The scenarios have different prerequisites.
Basic Prerequisites
   1.
      You have configured the Maintenance Optimizer in the SAP Solution Manager customizing.
      You must perform the following customizing activities for the Maintenance Optimizer:
            Assign S users for the SAP Support Portal.
            This activity specifies the S users (user ID for the SAP Service Marketplace) assigned to user IDs for the SAP Solution Manager.
            For more information see S Users in the Maintenance Optimizer.
            Enter user for communication with SAP Service and Support systems
2. This activity specifies the RFC connection SAP-OSS and the corresponding RFC user.
3.     You have assigned product versions to the system to be maintained, in the system landscape.
      You have assigned the systems to be maintained to a logical component.
      Note Note
      If you want to use a solution, you must assign the systems to be maintained, to the solution landscape. For more information, see Solution Manager System Landscape.
      End of the note.
   4.
      You have installed the Download Manager locally in your workplace. The Download Manager is in the SAP Software Distribution Center in the SAP Support Portal.
      Note Note
The item no2.
    This activity specifies the RFC connection SAP-OSS and the corresponding RFC user. <---- Is this mean I must have install and setup my Saprouter so that the SAP OSS connection is working before I can completed the SAP Solman Maintenance Optimizer setup?
Thanks.
Ck chai

Hi,
Just clarify my question.
I would like to run tcode "Solman_setup" to activate my Maintenance Optimizer for my new install SOLMAN & ECC6 System.
The reason is I need to download service pack for my ECC6 system.
Now I have some confusion on the "Solman_Setup" prerequisites
Prerequisites
You have installed the SAP Solution Manager and satisfied the following configuration prerequisites:
1)   The license key is installed. -
>OK
2)   The profile parameter /ICM_HOST_NAME_FULL or SAPLOCALHOSTFULL is set----
>OK
3)   The Transport Management System (TMS) is configured. -
> Not sure, Is this mean I have to setup my TMS in all the ECC6 system? Example --> DEV, QAS and PROD.
4)   The connection to the SAP backend system exists and works. -
> What is this mean? I need to Setup RFC connection manually using SM59? RFC connection from Solman to my ECC6-DEV,QAS, PRD?
5)   The SAP Solution Manager Java instance is up-to-date. --> not too sure. Can someone explain how this can be checked?
Thank you very much.
Ck chai

Maintenance Optimizer config step-by-step

Hi All,
I am not a SAP Basis Person,I install Solution Manager 4.0.
Now i want to configure it for SAP Service Pack downlod purpose.
Can any one help me in this regard in simplest way to configure Maintenance Optimizer.
Regds
Gyan

Hi Gyan,
when setting up the Maintenance Optimizer, you will have to carry out the basic configuration steps from the Implementation Guide of your Solution Manager system (transaction SPRO):
SAP Solution Manager
- Basic Settings
-- SAP Solution Manager System
Follow the instructions step by step! Another important point from the Implementation Guide can be found under:
SAP Solution Manager
- SAP Solution Manager System
-- Activate Integration with Change Request Management
Furthermore check, if all necessary BC-Sets have been activated (Transaction SCPR20), these BC-Sets are as follows:
SOLMAN40_SDESK_BASICFUNC_000
SOLMAN40_CHARM_BASICFUNC_001
SOLMAN40_MOPZ_TTYP_SLMO
Make sure to have the table AISUSER maintained as described in the IMG, and check if the destination SAP-OSS (transaction SM59) is having the right settings.
Do not forget to assign a Logical Component to your Solution Landscape in the transaction SMSY.
Please check also note no. 990534.
Further information on the Maintenance Optimizer you will find under http://service.sap.com/solman-mopz
In case of any problems, just ask me again!
Regards
Csaba

Maintenance Optimizer (RFC-error?)

Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Hi!
I would like to set up the maintenance optimizer activities in my SOLMAN and have the following error/information by entering the Maintenance Optimizer.
<b>How can I fix/solve this ussue?</b>
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).
Thank you
regards

Hello Peter,
it seems that your MOPZ isn't initialized correctly. Please see the document in Service marketplace, alias /solman-mopz -> very last link on the bottom ("step-by-step ...".
The entry of the missing RFC-destination is only the first thing which has to be done. You should also activate a BC-Set and maintain your iBase. All of this is decribed in the pdf above.
Regards, Alexander

How to approve in maintenance optimizer for download.

Dear All,
I need to download support pack and other software like SAP JVM Switch tool 1.0 from service market place.
It is asking for approval, Could you please specify which tcode is needed for maintenance optimizer and step by step
solution to approve the software.
Regards,
Dilip

Hi Dilip,
refer link :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/304f52c1-3aae-2910-6081-8d1deace58f3?QuickLink=events&overridelayout=true
look for section Maintenance optimizer - Screens , where step by step screen shots are provided to approve packages.
You need to go to Tcode DSWP --> go to correct/active solution --> Change management --> Maintenance optimizer
Make sure that the SAP user id you are trying to access have S user id linked , check Tcode AISUSER
Regards,

Overview of Switch framework

Hello,
I would like to know more about the Switch framework to activate the technical uses after the ERP system is upgraded to EHP4.
Are there any docs or slides available talking about this, maybe an overview on switch framework? Any help would be highly appreciated.
Thanks,
Ajay

You find an overview on some features of the Switch Framework in these weblogs:
The Three Use Cases of the Enhancement- and Switch-Framework - Part 5: The Basics about Switching
Second Try: The Three Use Cases of the Enhancement- and Switch-Framework - Part 6: The Re-Integration of the SAP Industry Solutions into the ERP Core
The Three Use Cases of the Enhancement and Switch Framework: Part 7 - The Enhancement Package Strategy of SAP ERP 6.0
How to Get the Most From the Enhancement and Switch Framework as a Customer or Partner - Tips from the Experts
Regards
Thomas

How to delete the redundant sessions in Maintenance Optimizer?

Hi experts,
As it said in title, how to delete the expired sessions as the screenshot below in Maintenance Optimizer and keep SAP Solution Manager clean?
Thank you in advance.
Best Regards,
Pany

Hello,
Check here Deleting existing maintenance optimizer transactions
Please refer to the note 845433 , with the report CRM_ORDER_DELETE and transaction type SLMO,you can delete those maintenance optimizer, hope this help to you
BR,
K.

Maintenance Optimizer "local logical system is not defined"

hello, i would like to create a new maintenance transaction to upgrade from SAP ERP 6.0 to SAP ERP 6.0 Enhanced Package 4 i follow the steps in the "maintenance optimizer configuration guide" BUT when i click to create a new maintenance transaction i faced an error told me "local logical system is not defined"!!! so how i can define Local logical system?
thanks in advance
Amr M. Abdelazeez
Mobile: 002 011 40 85 200
Linked In: http://eg.linkedin.com/in/amrabdelazeez/
Alexandria, Egypt

This should be configuration issue, please check the description in the Implementation Guide (tr: SPRO) at following point:
SAP Solution Manager
- Basic Settings
   SAP Solution Manager System
    General Settings
     Maintain Logical Systems
After having maintained the logical systems, the error should not be displayed any longer.

Local logical system is not defined-Maintenance Optimizer Config

Hi,
When I try to configure Maintenance Optimizer in SAP Solution Manager 7, it gives me an error saying "Local logical system is not defined"
But I have created a Logical client using SCC4.
And the other thing is for this created client, does not have any users on this client, If I run,
SQL> select bname, UFKLAG from sapsr3.usr02 where mandt='400';
Answer is "no rows selected"
So I cannot even login in to my new client as well. I tried with SAP/PASS no use. I tried to re-set sap by deleteing it nothing helped.
my login/no_automatic_user_sapstar parameter also have 0 (But this is in Red, I dont know why its like that)
Please help me to rectify both these issues. Issue with Maintenance Optimizer and loggin in to the new client.
Thank you!

First of all, 'Logical System' and 'Logical Client' are two different things.
For Client Problem:
You did create a client in SCC4.
1. did you create a logical system via BD54 and then did you assign that logical system to this newly created client ?
2. did you perform a local client copy to put data into this new client from an old or from a standard client like 000 ?
If you didn't perform above two things, then please do. Only then, you will be able to see some data in this client and will be able to to select statements, And, obviously the SAP*/PASS login (login/no_automatic_user_sapstar should be 0 after reactivation of profile and restart of the instance)
For MOpz issue:
Could you please search in sap marketplace for any particular note specific to MOpz ?

Problem with Maintenance Optimizer...

Hello gurus,
I had a problem which I didn´t reached a solution...
When I create a new maintenance optimizer transaction and choose, on first step "Plan Maintenance", a type of Product Version I don´t have all systems which I configure on this Product Version on SMSY (System Landscape Directory).
For instance: I configure in SMSY the Product version (group) SAP ECC 6.0 which contains three systems DEV ; QAS ; PRD.
When I open/create a new maintenance optimizer transaction and choose the SAP ECC 6.0 I only see one system, the DEV system, within his, and I want to see all three systems which I configure in SMSY!
Help me please...! TKS
Best regards,
Joao Dimas

Hi Vijay,
When I press in that URL - http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000679533& - does not appear anything about maintenance optimizer guide... it show me a notify "This folder needs to be reviewed" and I can´t see anything like you describe... I´m newest in SAP and still I have difficulties on search sometimes some things...
The link above, have you sure that's correct?
What´s the exactly name of document that you refer??
Thanks in advance,
Best regards,
Joao Dimas

Error when Launching the Maintenance optimizer

Hello,
When launching the Maintenance optimizer of solman 7.1, in the step Cionfirm Target i got the following dump:
The followin error text was processed in SD1 the systm: Value loss during allocation.
The error occurred on the application server SD1ODYLSV1_SD1_00 and in the work process. 9
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: GET_2ND_CHECK_RESULT of program CL_MO_SMP_ADAPTER=============CP
Method: LOAD_IMPACT_ASC of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: IF_COMPONENTCONTROLLER~LOAD_IMPACT_ASC of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: ONACTIONLOAD_IMPACT of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
Method: DO_HANDLE_ACTION_EVENTS of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
In the trace file of the Work process teh following error was found:
A ABAP Program CL_MO_SMP_ADAPTER=============CP        .
A Source CL_MO_SMP_ADAPTER=============CM00A      Line 19.
A Error Code CONVT_DATA_LOSS.
A Module $Id: //bas/720_REL/src/krn/runt/abxacnv.c#4 $ SAP.
A Function ab_xaCloseSimpleR Line 725.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A exceeded soft limit for RUDILOCKS (user: SAPADMIN    , ta:                     )
I tried to find something about the *RUDILOCKS * without success.
Do you have any suggestion to resolve the issue?

Hi,
Check SAP note 1505832.
Thanks
Sunny

No System Found in Maintenance Optimizer

Hi,
I have installed solution manager (ST 400 SP09) and did apply the relevant notes to setup the Maintenance Optimizer.
I could able to see the Maintenance Optimizer button in Support Package and Stack Inbox.
(Transaction SOLUTION_MANAGER> select the Solution->operation ->Change Management ->Support package Stack)
But I found following message No Systems Found along with the following message
Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).
How do I proceed further? I wanted to see the Systems defined under SMSY transaction to be displayed here.
Can any body help me by providing the exact steps define the systems in Maintenance Optimizer and how to sync the components defined under SMSY with MOZ?
Regards
Arati

Hi Amit
This doesn't resolved my issue.I am getting following message
No entries exist, double-click for long text
Message no. SV065
Diagnosis
No entries were found when importing data from the database.
Procedure
To create new entries, choose the function Edit -> New Entries.
To recover deleted data, you must first display it with the function
Select -> Display Deleted, and then discard changes with Ctrl. + F2 or
the "Discard Change" button.
Thanks
Arati

Maintenance Optimizer - Activate Switch Framework

Similar Messages

Maybe you are looking for