Maintenance Optimizer Configuration Guide

Hi All
I have a fully installed version of Solution Manager 4.0 SP12 and I am looking to configure the Maintenance Optimizer for monitoring our ECC and BW systems.
However, I feel that rather than using the wizards I need to set it up step by step.
My question, is there any documentation on how to set this up from Start to finish?
Manay thanks
Phil

Hello Guys..
The Step by Step Configuration of Maintenance Optimizer link is :
https://websmp105.sap-ag.de/~sapidb/011000358700000235502007E
Revert points is appreciated
Thank you..

Similar Messages

Maintenance optimizer configuration Steps

Dear All,
I am stuck with Maintenance optimizer configuration.
Can somone provide a usefull link for the same i am using SOLMAN 4.0 with SP 15.
Best of regards,
Gaurav Sood

Hi ,
Here are the steps :-
MAITENANCE OPTIMIZER STEPS
1) Create the system in solution manager (Tr.code-SMSY)
2) For this System to create the rfc destinations.
3) Create the logical component for system.
4) Maintain technical settings of OSS in the transaction code: OSS1
5) In TR code AISUSER maintain the user and OSS id
6) In DSWP transaction codeu2014in settings-global settings have to maintain OSS id and Password.
7)go to tr code DSWPu2014changemanagementu2014support packagesu2014click on maintenance optimizeru2014select the systemu2014continue-confirm files in download basketu2014complete transaction.
Thanks
Abullais

Solman_setup and maintenance optimizer configuration

Hi
We've newly installed Solution Manager 7.0 EHP1 and we want to configure maintenance optimizer for approving SP. Is it mandatory to use solman_setup tcode or can we configure maintenance optimizer via tcode solution_manager and smsy.
Best Regards...

Hi
IT better if u use Solman_setup because it will run a wizard and do the needful and in a proper manner but still if u are expert and have already done the setting in previous version then u can it urslf.
Go through the links to know more about this solman_setup wizard settings.
New Guided Procedure for Configuration of SAP Solution Manager
https://websmp203.sap-ag.de/~sapidb/011000358700001927282008E
Demo on Guided Procedure for Configuration of SAP Solution Manager
https://websmp203.sap-ag.de/~sapidb/011000358700000316542009E/Procedure_Configuration.exe
Hope it will help ur more
Regards
Prakhar

Maintenance Optimizer Configuration

Hello,
I have 2 issues with maintenance Optimizer. I am using Solution Manager Support Package 9. I applied the notes related to it including the 1024932 and 990534.
1. When i press the button Continue in step 1, I sometimes have a runtime error PXA_NO_FREE_SPACE. I read that I have to change the buffer size, but I don't know how i can do it.
2. When I don't have this runtime error, in the step 2 when i press the button Select files, it opens an error page "the page cannot be displayed".
Thanks in advance
François

HI François Maillard
For this you can ask to your BASIS Guy, If this server is test system, Then a simple restart will work in your condition.
Please let me know it it doesnt work,
Regards
Sukhii

Maintenance Optimizer configuration for SM7

Hi,
I am try to configure Mopz in my SM7.0 setup.
But at time of assigning S-user in tcode AISUSER, it is asking for "SAP Customer Number"
So my question is,
Is this the new field they mention in SM7.0? if yes then can anybod guide me how to configure it?
your help will be highly appriciated.
Thanking you
Regards
Pranav

Hi,
Check with following sites.
1. https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60d6ce0d-734f-2a10-e596-adbce4df51a8
2. http://www.sap.com/korea/services/pdf/Solman_4.0_Maintenance_Optimizer_Setup_Guide.pdf
Regards,
Srini Nookala

Maintenance Optimizer "local logical system is not defined"

hello, i would like to create a new maintenance transaction to upgrade from SAP ERP 6.0 to SAP ERP 6.0 Enhanced Package 4 i follow the steps in the "maintenance optimizer configuration guide" BUT when i click to create a new maintenance transaction i faced an error told me "local logical system is not defined"!!! so how i can define Local logical system?
thanks in advance
Amr M. Abdelazeez
Mobile: 002 011 40 85 200
Linked In: http://eg.linkedin.com/in/amrabdelazeez/
Alexandria, Egypt

This should be configuration issue, please check the description in the Implementation Guide (tr: SPRO) at following point:
SAP Solution Manager
- Basic Settings
   SAP Solution Manager System
    General Settings
     Maintain Logical Systems
After having maintained the logical systems, the error should not be displayed any longer.

Client for maintenance optimizer

Hi friends,
Which client is to be ussed for maintenance optimizer configuration (its 000 or 001)
Kindly advice.
Regards
Ayush johri

Hi Thomas,
I want the automatic calculated delta of available support packages and the actual support package level of my systems and for this i have to connect my DEV system and assign them to a logical component
1. How can i connect the DEV system to the logical component (if you can guide me through the steps )
2. As of installing Sol Man i havent created any solution manager landscape, now as you said sol man landscape would be used for connecting the DEV system to it. how can i do this ?
Please advice.
Your suggestions would be highly appreciated
Regards
Ayush

How to configuration Maintenance Optimizer in Solution Manager 4.0?

Hi All,
Can any tell me How to configuration Maintenance Optimizer in Solution Manager 4.0?
If any one having the document for same then please give me.
My mail id is : - <email address removed by moderator>
Thanks a lot,
Harshal

Hello Harshal,
Please go to service.sap.com/solutionmanager, click on the "maintenance optimizer" link, then a step-by-step guide is available there.
Another document is attached in Note 990534.
If you have further issues, Note 1024932 might be a good starting point.
Best regards,
Victor

Configuring Maintenance Optimizer issue

Hi All,
This is the first time I am configuring SM 4.0. I am done with installation, and want to conigure maintenance optimizer.
I followed the IMG guide step by step.
But after all done, there are no systems listed under the maintenance optimizer of my Solution Landscape.
Instead I get a message:
<b>Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).</b>
Meanwhile I have issue with my J2EE engine not starting due to some UME issues, which I am working on parallely.
Please do let me know what would be the issue.
I have followed the note 990534 and doen with the BC sets.
But I am not sure where am I making a mistake.
One more doubt is, does maintenance optimizer connect to the SAP service market place through SAPOSS??? and am I not seeing anu system because my SLD is down. Please bear with my ignorance, I am a little lost here.
I have completed the solution landscape, logical component, etc.
Please help...
Regards,
Sapfan

Hi JP,
My current SP levels are:
SAP_BASIS - 0011
SAP_ABAP - 0011
PI_BASIS 2005_11 - 0011
ST-PI 2005_11 - 0003
SAP_BW - 0011
SAP_AP - 0007
BBPCRM 5 - 0007
CPRXRPM - 0007
ST400 - 0010
ST-ICO - 0008
ST-SER - 0007
The issue is I did not connect to SAP yet, as I have only one RFC generated i.e. SAPOSS> Since my SAPRouter is not yet configured, I will connect to a valid SAPRouter once all the SM config is done.
I als got sone error in generating RFC for the main system when I used the wizard. I selected Change management and customizing directory and also selected Assign RFC for system monitoring.
I changed back the UME source to client 001, but still same.
Moreover the maintenance optimizer is not showing the satellite system.
I am really stuck.
Please let me know if you require more information.
I created the main system and defined the solution, as per the SPRO->Solution Manager -> Advanced Configuration -> Basic settings ->
I started this only after applying SP10.
Now I don see the systems both for Setup Solution monitoring and in maintenance optimizer.
WIll the system not reflect is the java ebngine is down???
Regards,
P.K

Setup guide for Maintenance Optimizer in solman 7.0 ehp1 sp18

Hi All ,
Please let me know the exact link where I can find the setup guide for Maintenance Optimizer in Solman 7.0 EHP1 sp18 .
I found a few guides but was not able to locate the correct guide for this particular version.
Thanks
Sunil Kumar

Hi Sunil,
EhP1 for Solution Manager means you have at least SPS18. Therefore documentation based on EhP1 is still valid, although Maintenance Optimizer has been updated as of SPS22+
You can refer to this guide: https://websmp106.sap-ag.de/~sapdownload/011000358700002003492008E
And also this help documentation: http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm
Regards,
-Rohan

Configuration of Maintenance Optimizer and IMG-configuration

Hi!
I am installing SAP Solution Manager 4.0 and two ERP-systems and would like to ask, whether a suitable detailed documentation about
Configuring Maintenance optimizer
IMG-Configuration
does exist?
P.S. Besides the document "Step by step Confugaration of Maintenance Optimizer" or .sim-File.
Thank you very much indead!
regards

Dear Axel,
Kindly review the URL :
http://service.sap.com/solman-mopz
On the first page at the bottom end you would find an PDF for configuration of Maintenance Optimizer and also an SAP Tutor file for the same.
Follow the steps and you are ready with the optimizer for downloading packages.
Hope the above information helps.
Regards
Amit Devale

Configure maintenance optimizer

Hi,
I am configuring "Configure Maintenance Optimizer" and I get the following error when I use T-code SM_MOPZ.
SAP MOPZ auto-configuration warnings
Message no. IMG_FASTCONF030
What's happen with my SOLMAN system?
Please advise!!
Thanks
Duypm

Hi Duypm,
Its a long process to go.
First, Raise a message with SAP for SAPROUTER certificate if you are planning to use SNC. You need to provide a public IP of your SAPRouter machine in the message.
Second, Send the filled form to SAP
Configure SNC on SAPRouter
Configure OSS1 and SAPOSS rfc destination.
Then configure Maintenance Optimizer.
Cheers.....,
Raghu

There are no stack configurations available in the Maintenance Optimizer

Hello,
I am trying to install Enhancement Pack 1 (EhP 1) on our DEV system, using SAINT in SAP NerWeaver 7.0.
I have downloaded the EHP1 and cpoied them into the "EPS\in" directory.
When I press the u201CStack Configurationu201D button, I get a pop-up that says, "There are no stack configurations available in the Maintenance Optimizer".
Does it require any files like .XML to load the files? Please let me know your suggestions.
Thanks,
Niranjan.

what happened to us was we did not download the upgrade programs for EHP1. Make sure you download both SPs in note 1169247. The first one has the SPs and upgrades SPs for Solman 7.0 to EHP1. The second download for the SPs for EHP1).
Also, we did it manually without the using the button 'stack configuration. Hope this help.
(Supp Packs and Upgrade SPs for Solman 7.0 to EHP1)
SAP Solution Manager 7.0 -> Support Package Stacks.
Target stack : SAP Solution Manager 7.0 EHP1-20 (07/2009)
Source stack : <your SAP Solution Manager 7.0 system stack>
(Support packs for EHP1)
SAP Solution Manager 7.0 EHP1 -> Support Package Stacks
Target stack : 20 (03/2009)
Source stack : 18 (11/2008)

Problem with Maintenance Optimizer...

Hello gurus,
I had a problem which I didn´t reached a solution...
When I create a new maintenance optimizer transaction and choose, on first step "Plan Maintenance", a type of Product Version I don´t have all systems which I configure on this Product Version on SMSY (System Landscape Directory).
For instance: I configure in SMSY the Product version (group) SAP ECC 6.0 which contains three systems DEV ; QAS ; PRD.
When I open/create a new maintenance optimizer transaction and choose the SAP ECC 6.0 I only see one system, the DEV system, within his, and I want to see all three systems which I configure in SMSY!
Help me please...! TKS
Best regards,
Joao Dimas

Hi Vijay,
When I press in that URL - http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000679533& - does not appear anything about maintenance optimizer guide... it show me a notify "This folder needs to be reviewed" and I can´t see anything like you describe... I´m newest in SAP and still I have difficulties on search sometimes some things...
The link above, have you sure that's correct?
What´s the exactly name of document that you refer??
Thanks in advance,
Best regards,
Joao Dimas

CHaRM, TMS, Monitoring using WILY Interoscope, Maintenance Optimizer

Hi Folks,
I am in urgent need of the configuration guide of SolMan 4.0.
as I want to implement CHaRM, TMS, Monitoring using WILY Interoscope, Maintenance Optimizer.
Also clearify the below mention doubts.
Scenario:
SAP is already implemented and Sol Man 4.0 is also installed.
We have 6 landscape of XI, BI, APO, CRM, SRM, HR, EP.
Also TMS is configured already for each and every system.
Doubts:
1. Can we do transport managment by using SolMan while we dont want to implement CHaRM.
2. Do we have to define the TMS again in the SolMan including routes and TDC or just we have to add the satellite systems with Sol Man.
3. What would be the detail steps for this.
Mail me docs at [email protected]
Thanks in advance.
Regards,
Akshay

Akshay Shail wrote:>
> I am from SAP Partener company. Do we have to pay any thing to get RKT PDFs.
>
> I would be very thankful of u if u will forward me PDFs at [email protected]
Hi Akshay,
as a registered SAP Partner, you should have access to
[SAP Support Portal - http://www.service.sap.com/support |http://www.service.sap.com/support]
Here you find all learning material from Ramp-Up Knowledge Transfer (RKT) for SAP Solution Manager 4.0.
[Ramp-Up Knowledge Transfer - SAP Solution Manager - http://www.service.sap.com/rkt-solman|http://www.service.sap.com/rkt-solman]
The documents PDFs, SAP Tutor sessions, ... may not be distributed or forwarded to you via E-Mail.
Best regards,
Ruediger

Maintenance Optimizer Configuration Guide

Similar Messages

Maybe you are looking for