Maintenance optimizer downloads error

Hi,
While I am doing the downloads for EHPI Upgrade but after choosing target, it gives me this error.
Requested Attribute Change Package 'EA-IPPE===400' not deliverable.
Requested Attribute Change Package 'EA-IPPE===400' not deliverable.
Message no.BORMMSGDELTACALC164
Please help
Thanks

Hello,
I see that the ACP 'EA-FINSERV617' is released for customers.
I cannot find any issue with the settings for this package.
Perhaps there is an issue in the marketplace. The package might have been moved, or the file has been renamed. In this case, the only way would be to create a new Maintenance Optimizer transaction.
Best regards,
Miguel Ariño

Similar Messages

Maintenance Optimizer (RFC-error?)

Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Hi!
I would like to set up the maintenance optimizer activities in my SOLMAN and have the following error/information by entering the Maintenance Optimizer.
<b>How can I fix/solve this ussue?</b>
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).
Thank you
regards

Hello Peter,
it seems that your MOPZ isn't initialized correctly. Please see the document in Service marketplace, alias /solman-mopz -> very last link on the bottom ("step-by-step ...".
The entry of the missing RFC-destination is only the first thing which has to be done. You should also activate a BC-Set and maintain your iBase. All of this is decribed in the pdf above.
Regards, Alexander

Maintenance Optimizer in SAP Solution Manager

what is Maintenance Optimizer in SAP Solution Manager and what are its benefits

Hi
even this may be useful
Ensure your Solution manager system is at the most recent Support Package Level, specifically ST 400 Patch 11, to reduce note application time
Download from oss most recent step-by-step setup guide
Oss note 1024932
Oss Note 1008717 ( N/A )
Relevant up to SP11 for Basis 700
OSS Note 950975 support for IE7 ( N/A we are using GUI)
Oss note 975510 corrections for snote ( Via OSS not snote )
Oss note 1004691 corrections for snote *** Corrections for 975510 ( UP TO SAP_BASIS 11 ) N/A
Common problem notes, but not critical for Maint Opt
0998987: Maintenance Optimizer: Empty error messages
1022072: Maintenance Optimizer: "No Data Available" message o See note 1025381 before applying 1022072.
1020789: Maintenance Optimizer: Allow all systems to be selected
1020802: Maintenance Optimizer List displays incomplete data
1024105: Maintenance Optimizer: two "Cancel" buttons
1025381: Maintenance Optimizer: Link to additional download files
1029453: Maintenance Optimizer - Wrong status displayed
1030405: Maintenance Optimizer: Browser opens in background
1030498: Maintenance Optimizer - IBase is not active
1032463: Maintenance Optimizer: Internet Explorer Script Error
1042704: Maintenance Optimizer: Display only employee partners
Partner Scenario SOLMAN4.0 Only
Os note 1021275 ( RFC Destinations ) N/A ST 400 11
Oss Note: 997780 ( N/A we are at 11 use note 939897 for ST400 SP11 Application )
Relevant for ST400 SP09 ( N/A ST 400 11 )
User:
To setup you must have SAP_ALL
General Users: ( Oss note 1032322 )
Must be assigned to role SAP_MAINT_OPT_ADMIN
Auth Object: D_SOL_VSBL ( visibility of solutions)
Auth Object: CRM_ORD_PR ( for CRM stuff )
/spro
As of Support Package level ST 400 SP10:
Call Transaction SPRO -> SAP Reference IMG ->SAP Solution Manager -> Advanced Configuration -> Basic Settings -> SAP Solution Manager System -> Change Management -> Set Up Maintenance Optimizer
This IMG activity refers to the SAP Note 990534: Solution Manager Maintenance Optimizer: BC Set. Follow the instructions in this SAP Note
N/A as of ST400 SP11
Define a Solution:
Solution_Manager Select Solution Overview New.
Enter Descriptive Name ( Ex. GTS Landscape )
Hit Continue
Select Solution Landscape Maintenance
Select System Groups & Logical Components on the Left hand Side
Select Solution Landscapes and pick the one you created
Define the solutions for that landscape
Highlight each item and click Logical Component (You must have a valid license to set this up)
Assign S-User
Transaction: AISUSER
Enter you user id and your SUSER ID for downloading
Create another SAPOSS Connection called SAP-OSS with S-User assigned
Call SOLUTION_MANAGER
Select Solution Overview
Select the solution you want to work with
Select Change Management Support Package Stacks
Click Maintenance Optimizer around middle of screen
Select the solution you want to get Sps for
Go to OSS and add the files to download basket
When done return to screen and hit continue
Select - Confirm files in Download Basket
Error message comes if your sap user and your oss user are not setup in AISUSER screen
Now go to SAP Download Manager ( On your local pc ) and download the files you just confirmed of course using the same S-User id you just added them to the basket with
Apply support packages via spam per normal process
Return to the SOLUTION_MANAGER window select the landscape you are working on
Hit Maintenance Optimizer List
Choose the maintenance transaction you are working on
You will see a list of the confirmed and downloaded sps you selected
Once you apply these to the system using SPAM you will change the status of implementation to Completed and Hit Save
This completes this activity
If you wish to do more work you will have to create a new transaction.
[Edit section] Add A New Instance to Maintenance Optimizer
Sign into Solution Manager
Ensure new instance has valid license installed and logical clients assigned
Select Landscape Components
Right Click Systems
     Select Create new system with assistant
Enter
SID / Description / Product Type / Installation Number ( Get this from SLICENSE in system you are setting up )
Next enter Sys # & MEssgae Server and hit continue
Next select Generate RFC Destinations & Assign Logical Components & Enter Client #
I always get a problem saving since SLD is not setup ignore and continue
Highlight the system you just added under Systems SAP Global Trade Services
Select Assignment to Logical Components
Now add additional software such as Net weaver ABAP & JAVA if your primary setup was of another type ( ex. GTS )
Highlight the system you wish to update under Systems and hit change
     Select Header Data
     Click Installed Product Versions
     In the product box add whatever you require for this system
     Select the version from the 2nd box and hit copy
Ex.
If you cannot setup the trusted system here is a workaround:
Create User in Target for Trusted System RFC from SM1
     User:      <Username>
     Pass:   <Pass>
     Type: Communication
Use this when setting up the trusted connection, remove the trust and use this CPIC user info for the RFC.
Generate RFCs and ensure SMSY setup is done for SID in Solution manager
Now Create a New Solution For your instance:
Go to SOLUTION_MANAGER transaction
     Select NEW
     Give Descriptive name: ex. GTS Landscape
Under Solution Landscape
     Select Solution Landscape Maintenance
     Select System Groups and Logical Components Tab
          Open Solution Landscapes
               Select the one you just defined (GTS Landscape)
SOLTION_MANAGER
Select Change Management Support Package Stacks
Select Maintenance Optimizer
Select the Product Version
     GTS 7.1
Select the System Type SID
From here you will be prompted to go to service marketplace and add the items you wish to install. You can do this beforehand as well, be sure to use the same Suser you setup in AISUSER with your sap login
It will ask you to confirm the basket, once you do that you install them normally.
Download with sap download manager, ftp and apply

Maintenance Optimizer Step 2 - Select Files cannot view

Hi,
We're using Solman 7.0 EHP to download EHP4 for ERP 6.0. We have maintained in SMSY, system type = ERP 6.0.
From the Maintenance Optimizer step 2- Select files, we cant see both the option of "maintenance" or "enhancement package installation" as shown in the SAP guide. The only option is "Find Download Files" button. Anyone here experience this issue before ?

Hi,
First of all, please make sure that:
- You are a registered ramp up customer.
- The S-user defined in AISUSER in solution manager has the
authorization to download ramp-up installation files.
Also make sure that you have installed all the notes listed in
1122966 for your Solution Manager release.
The option of installing Enhancement Packages in an ERP 6.0
system is only offered in the Solution Manager Maintenance
Optimizer if the systems assigned to the process are assigned to
the product version ERP 6.0 or ERP 2005 in the Solution Manager
system administration (transaction SMSY).   The product version
ECC 6.0 must not be used for the installation of Enhancement
Packages. The attached Note 1022072 describes step by step how to
change a product version assigned to a system.
The following notes should also be usefull:
   1134872 : Maintenance Optimizer: FAQ for Stack Delta Files in EPS
   1156571 : Maintenance Optimizer: Download Basket and SLM Download
   1168160 : MOPZ: Unicode selected automatically
   1170592 : MOPZ: S-User Enhancement
   1233954 : MOpz: No XML would be generated in EPS inbox
   1277035 : Solution Manager: EHP4 product data missing
Best regards,
Felipe Pitta

Error in download patches - Maintenance Optimizer - Urgent please

Hi,
I am getting the below error , when i tried to download patches from Maintenance optimizer. Please help me to resolve the issue ASAP.
Regards
Subbu

Hi Subbu,
pls refer below links,
consolut - SOLMAN_SAP_BACKEND008 - Assigned S user and RFC user of destination are incompatible - SOLMAN_SAP_BACKEND 008
Regards
K.N

Error in maintenance optimizer generating Stack File XML

Hi all,
In step 3 "Download Files" of maintenance optimizer transaction to implement the EHP5 of ERP, In the tab "Log" I see the following error.
*Collecting XML adjustment input data done with error or warning.
Message no.AGS_MOPZ_PLAN_MSG144*
The stack XML file is very very important to the ehpi installer, then I need to know which implications have the error below...
I create 3 Maintenance Optimizer transactions, and in all of them, the error appears.
Thanks a lot.

Hello,
Please check if the SPAM level of the Solution Manager is the latest.
If this does not help, please check the details about the error message in transaction SLG1 (this transaction is the full application log). There should be extra text / error message explaining the situation, you only have to look for the error around the time when you got the 'Collecting XML adjustment input data done with error or warning' message.
Best regards,
Miguel Ariñ

Error in Maintenance Optimizer in step "Select files for component "

Hi everybody,
i would like to download patches for my system. I have defined a solution and now i will start the Maintenance Optimizer procedure to download, but when i press a button "Select Files..." an error "the page cannot be displayed" occurred.
Does anybody know what should i check in my configuration? Where can I find more details for error?
Regards
Bogdan

Hi,
Here is the whole solution for you.
Hope you have implemented the note 990534 properly.
This is what I have done to resolve the same issue -
Apply patch ST-ICO 8 and 9
generate BC set SOLMAN40_MOPZ_TTYP_SLMO_000
generate BC set SOLMAN40_CHARM_PROXYFACT_001
If the error still persist, you will need to work on the below notes. (997780)
Goto SPRO - IMG>SAP SOL MGR>SCENARIO SPECIFIC>CHANGE REQ MGMNT>EXTNDED CONFIG>CHANGE TXN>CONSISTENCY CHECK IN CHANGE REQ MGMNT (define basic settings SOCM_CHECK_002)
Deselect the 'Integr' field (integration with change management is required) for the checks listed below. The system issues a message stating that changes are not allowed and that the entries are SAP property. This is only a warning message. Choose ENTER to ignore the message and save your changes.
Checks:
           IB_SYST_CHK
           S_USER_CHECK
           REQUEST_IN_PROCESS
           SOLUTION_ASSIGNMENT
           PRODUCT_ASSIGNMENT
           S_USER_CHECK
           EMPTY_CONTAINER
           SYSTEM_STATUS_OK
If you are getting the error "no active ibase" after this, try to implement 1030498.
Hope this helps. If this corrects your issue, please mark the question as answered and award points.
Thanks,
Mehfil Meherali

Failed to download object via Maintenance optimizer

Hi
I am downloading the file "ST-PI 2005_1_700" via Tx. DSWP and Maintenance Optimizer. If I choose the file and see my Download Basket in Download Manager I am getting the stnadard error "You need Maintenance Optimizer in order to download the objects".
What is wrong, because I am usíng MO and the user has SAP_ALL profile?
Thank you
regards

Hi Axel,
What is the status of the file inside 'Download basket'. I am guessing that it's yet to be approved,
To approve the request, you have to confirm the download basket in Maintenance Optimizer.
In the step-3 'download file' inside maintenance optimizer first select 'Confirm files in Download basket'. then it will open a pop-up window showing files waiting to be approved inside download basket. Select the required files and select 'confirm download'. Then you will be bale to download files from the download manager.
Hope it helps...
Cheers !!
Satya.
PS: Pls reward points if the answer was helpful...Thx.

Error when Launching the Maintenance optimizer

Hello,
When launching the Maintenance optimizer of solman 7.1, in the step Cionfirm Target i got the following dump:
The followin error text was processed in SD1 the systm: Value loss during allocation.
The error occurred on the application server SD1ODYLSV1_SD1_00 and in the work process. 9
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: GET_2ND_CHECK_RESULT of program CL_MO_SMP_ADAPTER=============CP
Method: LOAD_IMPACT_ASC of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: IF_COMPONENTCONTROLLER~LOAD_IMPACT_ASC of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: ONACTIONLOAD_IMPACT of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
Method: DO_HANDLE_ACTION_EVENTS of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
In the trace file of the Work process teh following error was found:
A ABAP Program CL_MO_SMP_ADAPTER=============CP        .
A Source CL_MO_SMP_ADAPTER=============CM00A      Line 19.
A Error Code CONVT_DATA_LOSS.
A Module $Id: //bas/720_REL/src/krn/runt/abxacnv.c#4 $ SAP.
A Function ab_xaCloseSimpleR Line 725.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A exceeded soft limit for RUDILOCKS (user: SAPADMIN    , ta:                     )
I tried to find something about the *RUDILOCKS * without success.
Do you have any suggestion to resolve the issue?

Hi,
Check SAP note 1505832.
Thanks
Sunny

What is best practice for using Maintenance Optimizer to download SPS + EhP

SAP indicates in note 1095233 and many other documents that the best practice is to implement an EhP along with an SP Stack in the same queue. Furthermore, the only way to download the components of an EhP is via Maintenance Optimizer. However, in step 2 (Calculate download files automatically) you must choose either Maintenance (SPS) or Enhancement Package Installation (EhP); there is no way to tell Maintenance Optimizer that you want to download both SPS and EhP.
In developing the process for my team I circumvented the problem by saying to select Maintenance first to get the SPS into the Download Basket and follow that with selecting Enhancement Package Installation to get the EhP into the Download Basket. The plan would be to include all the downloads in the SPAM/SAINT queue with the expectation that SPAM/SAINT will be able to determine what must be included.
I'm wondering now whether that is a legitimate way to approach this and I am hoping others will share their process.
Thanks,
Terry McCann
Monsanto Company
St. Louis, MO

Actually, I don't believe you will get the entire SP Stack for ERP 6, you only get those pieces of the stack that are required for the Technical Usages you select for the EhP. I'm basing that on my observation that you get a different subset of the files making up the stack depending upon your TU selection. Also, note 1095233 specifically states:
If now the corrections included in the enhancement package 3 correspond to ERP 6.0 SP level 11, SAP recommends to update also the parts of your system to SP level 11 which you do not want to update to enhancement package 3 to achieve a consistent correction level in all parts of your application: SAP recommends to update all software components to the correction status corresponding to SAP ERP 6.0 Support Package Stack 11 with the installation of SAP enhancement package 3 for SAP ERP 6.0.
Thanks,
Terry

Maintenance Optimizer Error "Value loss during allocation"

Hi Everybody,
like Error when Launching the Maintenance optimizer, i am facing the same problem with SolMan 7.1. Is there anything new?
System is new installed.
SOLMAN_SETUP is executed.
BC Set for MOPZ are activeded.
SMSY is arranged.
MOPZ is aborting after calculation the target with
On Web:
The followin error text was processed in SOL the systm: Value loss during allocation.
The error occurred on the application server _______ and in the work process. 7
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: GET_2ND_CHECK_RESULT of program CL_MO_SMP_ADAPTER=============CP
Method: LOAD_IMPACT_ASC of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: LOAD_22 of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: LOAD_CONTEXT of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: IF_COMPONENTCONTROLLER~LOAD_CONTEXT of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: HANDLEDEFAULT of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
On ST22:
Category               ABAP Programming Error
Runtime Errors         CONVT_DATA_LOSS
Except.                CX_SY_CONVERSION_DATA_LOSS
ABAP Program           CL_MO_SMP_ADAPTER=============CP
Application Component SV-SMG-MAI
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_CONVERSION_DATA_LOSS', was not
     caught in
    procedure "GET_2ND_CHECK_RESULT" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Value "01200615325000005298|01200314694900012246:01200314694900010013" was
     allocated in a field which is not long enough.
    Therefore the target field could not store all information of
     "01200615325000005298|01200314694900012246:01200314694900010013".

Hello Espartaco,
I have the same problem, too. Have there been a response to your OSS message?
With best regards
Frank Lehmann

Error when trying use the Maintenance Optimizer Transaction

I have finally gotten through a major headache setting up a SM box, but now when I try to use the maintenance Optimizer, i get the following messages and it won't go any further.
Information Procedure 8000000051 Saved
Warning Status was reset by system
Warning There is already a transaction for the systems of this product version
It stays on the screen to select the logical component and just keeps saving the procedure. I have tried deactivating the old procedures but nothing is working.
Any Ideals.

There was a configuration error, fixed it

AISUSER not assigned - Giving error during Maintenance Optimizer

Hi Tech Masters,
I am trying to set up Maintenance Optimizer on Solution Manager 7.0 SP15 ( WIndows 2003).
I am using wizard to do this. But I am getting error when I am trying to update "Assign S-User for SAP Support Portal functionality" ( Basically the AISUSER Tcode does ) :
When I am entering new entries, Its allowing me to enter User , SAP Customer No, but whenver I am trying to input Contact Person Its giving me the following error :
"Partner number 0000000000 was not found in table AICONTACTS."
Please help me out.
Thanks
Rabi Pal

Are you sure that you are entering the correct Customer Number and the corresponding S-userid is correct ?
May be this problem is related with several customer number administration ? check these notes
Note 1151450 - FAQ: Managing several customer numbers - Support Package 15
Note 1082010 - Administration of several customer numbers

Maintenance Optimizer, approval step of download basket

Hello!
Im trying to download an update for our portal from the SAP web site, using download manager. But i can't get the file in download because this one has to be approve. I ve seen that this is done in Solution manager, but i can't find how to do it.Does someone know the step to solve this probleme?
Thanks & Regards
Chris

Hi,
Have you setup maintenance optimizer?
The first Pre-requisite to setup maintenance optimizer is
SOLMAN to be
SP10
Also check these
[Tutor|https://websmp201.sap-ag.de/~sapidb/011000358700006477102006E.sim]
[Note|https://websmp201.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1024932&_NLANG=E]
This will solve your problem.
Feel free to revert back.
--Ragu

How to approve in maintenance optimizer for download.

Dear All,
I need to download support pack and other software like SAP JVM Switch tool 1.0 from service market place.
It is asking for approval, Could you please specify which tcode is needed for maintenance optimizer and step by step
solution to approve the software.
Regards,
Dilip

Hi Dilip,
refer link :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/304f52c1-3aae-2910-6081-8d1deace58f3?QuickLink=events&overridelayout=true
look for section Maintenance optimizer - Screens , where step by step screen shots are provided to approve packages.
You need to go to Tcode DSWP --> go to correct/active solution --> Change management --> Maintenance optimizer
Make sure that the SAP user id you are trying to access have S user id linked , check Tcode AISUSER
Regards,

Maintenance optimizer downloads error

Similar Messages

Maybe you are looking for