Maintenance Optimizer (RFC-error?)

Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Hi!
I would like to set up the maintenance optimizer activities in my SOLMAN and have the following error/information by entering the Maintenance Optimizer.
How can I fix/solve this ussue?
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).
Thank you
regards

Hello Peter,
it seems that your MOPZ isn't initialized correctly. Please see the document in Service marketplace, alias /solman-mopz -> very last link on the bottom ("step-by-step ...".
The entry of the missing RFC-destination is only the first thing which has to be done. You should also activate a BC-Set and maintain your iBase. All of this is decribed in the pdf above.
Regards, Alexander

Similar Messages

Maintenance optimizer downloads error

Hi,
While I am doing the downloads for EHPI Upgrade but after choosing target, it gives me this error.
Requested Attribute Change Package 'EA-IPPE===400' not deliverable.
Requested Attribute Change Package 'EA-IPPE===400' not deliverable.
Message no.BORMMSGDELTACALC164
Please help
Thanks

Hello,
I see that the ACP 'EA-FINSERV617' is released for customers.
I cannot find any issue with the settings for this package.
Perhaps there is an issue in the marketplace. The package might have been moved, or the file has been renamed. In this case, the only way would be to create a new Maintenance Optimizer transaction.
Best regards,
Miguel Ariño

Maintenance Optimizer in SAP Solution Manager

what is Maintenance Optimizer in SAP Solution Manager and what are its benefits

Hi
even this may be useful
Ensure your Solution manager system is at the most recent Support Package Level, specifically ST 400 Patch 11, to reduce note application time
Download from oss most recent step-by-step setup guide
Oss note 1024932
Oss Note 1008717 ( N/A )
Relevant up to SP11 for Basis 700
OSS Note 950975 support for IE7 ( N/A we are using GUI)
Oss note 975510 corrections for snote ( Via OSS not snote )
Oss note 1004691 corrections for snote *** Corrections for 975510 ( UP TO SAP_BASIS 11 ) N/A
Common problem notes, but not critical for Maint Opt
0998987: Maintenance Optimizer: Empty error messages
1022072: Maintenance Optimizer: "No Data Available" message o See note 1025381 before applying 1022072.
1020789: Maintenance Optimizer: Allow all systems to be selected
1020802: Maintenance Optimizer List displays incomplete data
1024105: Maintenance Optimizer: two "Cancel" buttons
1025381: Maintenance Optimizer: Link to additional download files
1029453: Maintenance Optimizer - Wrong status displayed
1030405: Maintenance Optimizer: Browser opens in background
1030498: Maintenance Optimizer - IBase is not active
1032463: Maintenance Optimizer: Internet Explorer Script Error
1042704: Maintenance Optimizer: Display only employee partners
Partner Scenario SOLMAN4.0 Only
Os note 1021275 ( RFC Destinations ) N/A ST 400 11
Oss Note: 997780 ( N/A we are at 11 use note 939897 for ST400 SP11 Application )
Relevant for ST400 SP09 ( N/A ST 400 11 )
User:
To setup you must have SAP_ALL
General Users: ( Oss note 1032322 )
Must be assigned to role SAP_MAINT_OPT_ADMIN
Auth Object: D_SOL_VSBL ( visibility of solutions)
Auth Object: CRM_ORD_PR ( for CRM stuff )
/spro
As of Support Package level ST 400 SP10:
Call Transaction SPRO -> SAP Reference IMG ->SAP Solution Manager -> Advanced Configuration -> Basic Settings -> SAP Solution Manager System -> Change Management -> Set Up Maintenance Optimizer
This IMG activity refers to the SAP Note 990534: Solution Manager Maintenance Optimizer: BC Set. Follow the instructions in this SAP Note
N/A as of ST400 SP11
Define a Solution:
Solution_Manager Select Solution Overview New.
Enter Descriptive Name ( Ex. GTS Landscape )
Hit Continue
Select Solution Landscape Maintenance
Select System Groups & Logical Components on the Left hand Side
Select Solution Landscapes and pick the one you created
Define the solutions for that landscape
Highlight each item and click Logical Component (You must have a valid license to set this up)
Assign S-User
Transaction: AISUSER
Enter you user id and your SUSER ID for downloading
Create another SAPOSS Connection called SAP-OSS with S-User assigned
Call SOLUTION_MANAGER
Select Solution Overview
Select the solution you want to work with
Select Change Management Support Package Stacks
Click Maintenance Optimizer around middle of screen
Select the solution you want to get Sps for
Go to OSS and add the files to download basket
When done return to screen and hit continue
Select - Confirm files in Download Basket
Error message comes if your sap user and your oss user are not setup in AISUSER screen
Now go to SAP Download Manager ( On your local pc ) and download the files you just confirmed of course using the same S-User id you just added them to the basket with
Apply support packages via spam per normal process
Return to the SOLUTION_MANAGER window select the landscape you are working on
Hit Maintenance Optimizer List
Choose the maintenance transaction you are working on
You will see a list of the confirmed and downloaded sps you selected
Once you apply these to the system using SPAM you will change the status of implementation to Completed and Hit Save
This completes this activity
If you wish to do more work you will have to create a new transaction.
[Edit section] Add A New Instance to Maintenance Optimizer
Sign into Solution Manager
Ensure new instance has valid license installed and logical clients assigned
Select Landscape Components
Right Click Systems
 Select Create new system with assistant
Enter
SID / Description / Product Type / Installation Number ( Get this from SLICENSE in system you are setting up )
Next enter Sys # & MEssgae Server and hit continue
Next select Generate RFC Destinations & Assign Logical Components & Enter Client #
I always get a problem saving since SLD is not setup ignore and continue
Highlight the system you just added under Systems SAP Global Trade Services
Select Assignment to Logical Components
Now add additional software such as Net weaver ABAP & JAVA if your primary setup was of another type ( ex. GTS )
Highlight the system you wish to update under Systems and hit change
 Select Header Data
 Click Installed Product Versions
 In the product box add whatever you require for this system
 Select the version from the 2nd box and hit copy
Ex.
If you cannot setup the trusted system here is a workaround:
Create User in Target for Trusted System RFC from SM1
 User: <Username>
 Pass: <Pass>
 Type: Communication
Use this when setting up the trusted connection, remove the trust and use this CPIC user info for the RFC.
Generate RFCs and ensure SMSY setup is done for SID in Solution manager
Now Create a New Solution For your instance:
Go to SOLUTION_MANAGER transaction
 Select NEW
 Give Descriptive name: ex. GTS Landscape
Under Solution Landscape
 Select Solution Landscape Maintenance
 Select System Groups and Logical Components Tab
 Open Solution Landscapes
 Select the one you just defined (GTS Landscape)
SOLTION_MANAGER
Select Change Management Support Package Stacks
Select Maintenance Optimizer
Select the Product Version
 GTS 7.1
Select the System Type SID
From here you will be prompted to go to service marketplace and add the items you wish to install. You can do this beforehand as well, be sure to use the same Suser you setup in AISUSER with your sap login
It will ask you to confirm the basket, once you do that you install them normally.
Download with sap download manager, ftp and apply

Error in download patches - Maintenance Optimizer - Urgent please

Hi,
I am getting the below error , when i tried to download patches from Maintenance optimizer. Please help me to resolve the issue ASAP.
Regards
Subbu

Hi Subbu,
pls refer below links,
consolut - SOLMAN_SAP_BACKEND008 - Assigned S user and RFC user of destination are incompatible - SOLMAN_SAP_BACKEND 008
Regards
K.N

Error when Launching the Maintenance optimizer

Hello,
When launching the Maintenance optimizer of solman 7.1, in the step Cionfirm Target i got the following dump:
The followin error text was processed in SD1 the systm: Value loss during allocation.
The error occurred on the application server SD1ODYLSV1_SD1_00 and in the work process. 9
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: GET_2ND_CHECK_RESULT of program CL_MO_SMP_ADAPTER=============CP
Method: LOAD_IMPACT_ASC of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: IF_COMPONENTCONTROLLER~LOAD_IMPACT_ASC of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: ONACTIONLOAD_IMPACT of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
Method: DO_HANDLE_ACTION_EVENTS of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
In the trace file of the Work process teh following error was found:
A ABAP Program CL_MO_SMP_ADAPTER=============CP        .
A Source CL_MO_SMP_ADAPTER=============CM00A      Line 19.
A Error Code CONVT_DATA_LOSS.
A Module $Id: //bas/720_REL/src/krn/runt/abxacnv.c#4 $ SAP.
A Function ab_xaCloseSimpleR Line 725.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A exceeded soft limit for RUDILOCKS (user: SAPADMIN    , ta:                     )
I tried to find something about the *RUDILOCKS * without success.
Do you have any suggestion to resolve the issue?

Hi,
Check SAP note 1505832.
Thanks
Sunny

Error in maintenance optimizer generating Stack File XML

Hi all,
In step 3 "Download Files" of maintenance optimizer transaction to implement the EHP5 of ERP, In the tab "Log" I see the following error.
*Collecting XML adjustment input data done with error or warning.
Message no.AGS_MOPZ_PLAN_MSG144*
The stack XML file is very very important to the ehpi installer, then I need to know which implications have the error below...
I create 3 Maintenance Optimizer transactions, and in all of them, the error appears.
Thanks a lot.

Hello,
Please check if the SPAM level of the Solution Manager is the latest.
If this does not help, please check the details about the error message in transaction SLG1 (this transaction is the full application log). There should be extra text / error message explaining the situation, you only have to look for the error around the time when you got the 'Collecting XML adjustment input data done with error or warning' message.
Best regards,
Miguel Ariñ

Maintenance Optimizer Error "Value loss during allocation"

Hi Everybody,
like Error when Launching the Maintenance optimizer, i am facing the same problem with SolMan 7.1. Is there anything new?
System is new installed.
SOLMAN_SETUP is executed.
BC Set for MOPZ are activeded.
SMSY is arranged.
MOPZ is aborting after calculation the target with
On Web:
The followin error text was processed in SOL the systm: Value loss during allocation.
The error occurred on the application server _______ and in the work process. 7
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: GET_2ND_CHECK_RESULT of program CL_MO_SMP_ADAPTER=============CP
Method: LOAD_IMPACT_ASC of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: LOAD_22 of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: LOAD_CONTEXT of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: IF_COMPONENTCONTROLLER~LOAD_CONTEXT of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: HANDLEDEFAULT of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
On ST22:
Category               ABAP Programming Error
Runtime Errors         CONVT_DATA_LOSS
Except.                CX_SY_CONVERSION_DATA_LOSS
ABAP Program           CL_MO_SMP_ADAPTER=============CP
Application Component SV-SMG-MAI
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_CONVERSION_DATA_LOSS', was not
     caught in
    procedure "GET_2ND_CHECK_RESULT" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Value "01200615325000005298|01200314694900012246:01200314694900010013" was
     allocated in a field which is not long enough.
    Therefore the target field could not store all information of
     "01200615325000005298|01200314694900012246:01200314694900010013".

Hello Espartaco,
I have the same problem, too. Have there been a response to your OSS message?
With best regards
Frank Lehmann

Error in Maintenance Optimizer in step "Select files for component "

Hi everybody,
i would like to download patches for my system. I have defined a solution and now i will start the Maintenance Optimizer procedure to download, but when i press a button "Select Files..." an error "the page cannot be displayed" occurred.
Does anybody know what should i check in my configuration? Where can I find more details for error?
Regards
Bogdan

Hi,
Here is the whole solution for you.
Hope you have implemented the note 990534 properly.
This is what I have done to resolve the same issue -
Apply patch ST-ICO 8 and 9
generate BC set SOLMAN40_MOPZ_TTYP_SLMO_000
generate BC set SOLMAN40_CHARM_PROXYFACT_001
If the error still persist, you will need to work on the below notes. (997780)
Goto SPRO - IMG>SAP SOL MGR>SCENARIO SPECIFIC>CHANGE REQ MGMNT>EXTNDED CONFIG>CHANGE TXN>CONSISTENCY CHECK IN CHANGE REQ MGMNT (define basic settings SOCM_CHECK_002)
Deselect the 'Integr' field (integration with change management is required) for the checks listed below. The system issues a message stating that changes are not allowed and that the entries are SAP property. This is only a warning message. Choose ENTER to ignore the message and save your changes.
Checks:
           IB_SYST_CHK
           S_USER_CHECK
           REQUEST_IN_PROCESS
           SOLUTION_ASSIGNMENT
           PRODUCT_ASSIGNMENT
           S_USER_CHECK
           EMPTY_CONTAINER
           SYSTEM_STATUS_OK
If you are getting the error "no active ibase" after this, try to implement 1030498.
Hope this helps. If this corrects your issue, please mark the question as answered and award points.
Thanks,
Mehfil Meherali

Error when trying use the Maintenance Optimizer Transaction

I have finally gotten through a major headache setting up a SM box, but now when I try to use the maintenance Optimizer, i get the following messages and it won't go any further.
Information Procedure 8000000051 Saved
Warning Status was reset by system
Warning There is already a transaction for the systems of this product version
It stays on the screen to select the logical component and just keeps saving the procedure. I have tried deactivating the old procedures but nothing is working.
Any Ideals.

There was a configuration error, fixed it

AISUSER not assigned - Giving error during Maintenance Optimizer

Hi Tech Masters,
I am trying to set up Maintenance Optimizer on Solution Manager 7.0 SP15 ( WIndows 2003).
I am using wizard to do this. But I am getting error when I am trying to update "Assign S-User for SAP Support Portal functionality" ( Basically the AISUSER Tcode does ) :
When I am entering new entries, Its allowing me to enter User , SAP Customer No, but whenver I am trying to input Contact Person Its giving me the following error :
"Partner number 0000000000 was not found in table AICONTACTS."
Please help me out.
Thanks
Rabi Pal

Are you sure that you are entering the correct Customer Number and the corresponding S-userid is correct ?
May be this problem is related with several customer number administration ? check these notes
Note 1151450 - FAQ: Managing several customer numbers - Support Package 15
Note 1082010 - Administration of several customer numbers

No System Found in Maintenance Optimizer

Hi,
I have installed solution manager (ST 400 SP09) and did apply the relevant notes to setup the Maintenance Optimizer.
I could able to see the Maintenance Optimizer button in Support Package and Stack Inbox.
(Transaction SOLUTION_MANAGER> select the Solution->operation ->Change Management ->Support package Stack)
But I found following message No Systems Found along with the following message
Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).
How do I proceed further? I wanted to see the Systems defined under SMSY transaction to be displayed here.
Can any body help me by providing the exact steps define the systems in Maintenance Optimizer and how to sync the components defined under SMSY with MOZ?
Regards
Arati

Hi Amit
This doesn't resolved my issue.I am getting following message
No entries exist, double-click for long text
Message no. SV065
Diagnosis
No entries were found when importing data from the database.
Procedure
To create new entries, choose the function Edit -> New Entries.
To recover deleted data, you must first display it with the function
Select -> Display Deleted, and then discard changes with Ctrl. + F2 or
the "Discard Change" button.
Thanks
Arati

Maintenance Optimizer in Solution Manager 3.2

We are experiencing the sheer joy that Solution Manager is, while trying to configure the Maintenance Optimizer.
From the document MOPZ_Component32_vers4.pdf document that is for SP15 for SolMan 3.2, we are confused by this section on Page 6.
"Your system administrator must have performed the following Customizing activities:
&#56256;&#56440; Maintain User for Communication with SAP Service and Support
&#56256;&#56440; Assign S-User for SAP Support Portal functionality or with the transaction AISUSER
Your S-User must be assigned to the same customer or corporate number as
the S-User which your administrator entered in the SAP-OSS RFC destination."
We just don't understand the last sentence. You enter an S-User in the SAP-OSS RFC destination in sm59?? Where??
Currently in AISUER I have an entry, with my SAP User ID (eg. FRED) and my S-User ID in the 'Contact Person' column (e.g. 123456, my S000123456, shortened).
We can access the Maintenance Optimizer, but packages are not visible there. No error is reported. I have the necessary Roles. Are these the correct values?
Our SAPOSS Rfc is functioning, as user OSS_RFC. What the document is trying to say about the relationship between this RFC and a service marketplace S-User is unclear.
Any assistance appreciated. Remember, SM 3.2!

Hi,
You can download this to desktop or you can transfer same to server(/usr/sap/trans/EPS/in/)
You have to uncar using SAPCAR.
Also you can directly upload from front-end using spam/saint as well.
Then apply the same using spam/saint.
Let us know if you need any clarification.
Regards

Configuring Maintenance Optimizer issue

Hi All,
This is the first time I am configuring SM 4.0. I am done with installation, and want to conigure maintenance optimizer.
I followed the IMG guide step by step.
But after all done, there are no systems listed under the maintenance optimizer of my Solution Landscape.
Instead I get a message:
Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).
Meanwhile I have issue with my J2EE engine not starting due to some UME issues, which I am working on parallely.
Please do let me know what would be the issue.
I have followed the note 990534 and doen with the BC sets.
But I am not sure where am I making a mistake.
One more doubt is, does maintenance optimizer connect to the SAP service market place through SAPOSS??? and am I not seeing anu system because my SLD is down. Please bear with my ignorance, I am a little lost here.
I have completed the solution landscape, logical component, etc.
Please help...
Regards,
Sapfan

Hi JP,
My current SP levels are:
SAP_BASIS - 0011
SAP_ABAP - 0011
PI_BASIS 2005_11 - 0011
ST-PI 2005_11 - 0003
SAP_BW - 0011
SAP_AP - 0007
BBPCRM 5 - 0007
CPRXRPM - 0007
ST400 - 0010
ST-ICO - 0008
ST-SER - 0007
The issue is I did not connect to SAP yet, as I have only one RFC generated i.e. SAPOSS> Since my SAPRouter is not yet configured, I will connect to a valid SAPRouter once all the SM config is done.
I als got sone error in generating RFC for the main system when I used the wizard. I selected Change management and customizing directory and also selected Assign RFC for system monitoring.
I changed back the UME source to client 001, but still same.
Moreover the maintenance optimizer is not showing the satellite system.
I am really stuck.
Please let me know if you require more information.
I created the main system and defined the solution, as per the SPRO->Solution Manager -> Advanced Configuration -> Basic settings ->
I started this only after applying SP10.
Now I don see the systems both for Setup Solution monitoring and in maintenance optimizer.
WIll the system not reflect is the java ebngine is down???
Regards,
P.K

Solution Manage Maintenance Optimizer Installation

Hi,
I am in the process of trying to configure maintenance optimizer for solution manager. I have performed the following pre-requisites as specified in the SAP documentation
1. Support Package 09 for Solution manager
2. Applied OSS Notes 1024932, 1008717, 0950974
3. Set up user with appropriate roles and authorizations SAP_MAINT_OPT_ADMIN
4. Activated BC Sets as dictated by OSS note 990534
5. Define a Solution
6. Assign S-user to MO user
7. Check RFC Destination and assign S-user Login details
When I enter the solution and attempt to configure MO via Change Management -> Support Package Stacks, I get as far as the screen where you select the appropriate product version. I select the product and click to continue however I receive the following message
'Condition REQUEST_IN_PROCESS is not checked without Change Management integration'
Can anyone give me any suggestions to resolve this error.

Hi Stoecker,
I am also getting same problem.i followed that note which you have mentioned.
but where do i deselet the "íntegr' field?i am not getting
can plz exploain me on this.
and also one thing i want to add SAP ECC under systems in smsy transaction.
when i am trying to add it is asking for Product key.
can u plz provide me the key?
Thanx in advance.
Thanks and Regards,
Vinnu.

SLM maintenance optimizer problems

Hi guys,
Into the maintenance optimizer, i can't update my systems.
Error : "System has not been registred in the SLM"
Procedure
1. Run transaction code /TMWFLOW/MOPZCFG;
2. Start the Multiple Software Lifecycle Manager Configuration Assistant;
3. Select an SLM or create a new SLM;
4. Choose "SLM Configuration" and register these systems in the SLM.
When i do this procedure,when i saved i had this message :
ICF Error when receiving the response : ICM_HTTP_CONNECTION_FAILED
When i do an SLM check :
The SLM Web services are unavailable.
In the sm59 my RFC HTTP created automaticlly doesn't work...
Could someone help me to correct my problem step by step ?
What shall i have to do first?
thanks

No problem for the help.
I'm glad to have help someone who can give me my first 6 or 10 points !
We had many problems in EHP1 SP18 and we found many notes that explain us that our problems will be solved in SP19 only, but i don't remember wich one...
I try to apply the documentation but i cannot configure the https accept because of the librairy libsapcrypto. The documentation tell us to go to download it on the website but we don't have the rights and you have to request this librairy to waldorf only !
With the sp19, the solman_setup appears and correct many problems, but not the SLM problems : services are unavailable !
Do you test your services in VA like i said ? Mine doesn't works...

Maintenance Optimizer (RFC-error?)

Similar Messages

Maybe you are looking for