Maintenance Optimizer TCode

Dear All,
I am a BW Consultant and I would need to install some support packages for BI7. I heard that SAP has made it mandatory to use solution manager to install the support packages. Can anyone tell what is the tcode used to get into the maintenance optimizer to install the support packages.
Regards
Vijay

Hi Vijay,
You can use Txn solution_manager --> Change management --> Support Package Stacks --> maintanace Optimizer
Please go through the below link , it will explain screen by screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/304f52c1-3aae-2910-6081-8d1deace58f3
Thanks
Prince

Similar Messages

Solution manager "Maintenance Optimizer" System Logical Component

Hello friends!
I have some troubles with my Solution Manager!
After SPS17 installation I don't see any system in SOLUTION_MANAGER transaction.
Steps for reconstructions:
1) start tcode SOLUTION_MANAGER
2) select my solution from list (the same like in tcode dswp)
3) goto Change Management --> Support Package Stacks --> Maintenance Optimizer
4) chose product version SAP ERP 6.0 (it is assigned to my solution)
5) in appears grid I don't see system (see below)
I----II--
I
I_V_I_System_I_Logical Component_I
Before installation I can select my solution. Now it's not critical because I can confirm downloads...

Hi Luke!
I didn't solve this problem...
But I've only one system in my solution, and, as I understand, it may not be showed. But I may be wrong...

Problem with Maintenance Optimizer - Solman EHP1

Hi All,
I have a solution manager 7.0 ehp1 system and maintenance optimizer does not work at all.
Initial configurarion and Basic configuration has been done - Tcode : Solman_Setup
A solution has been created and systems have been assigned to it, however when i launch create new maintenance
transaction it shows us the solution and the systems assigned under it.If i select our Production system and click on next
it comes up an error, saying the table does not contain any data. Do i need to do the SLM configuration for MOPZ to work?
Has anyone seen this error earlier. Any inputs would be of great help.
Regards,
Ershad Ahmed.

Hi,
Though the error does not give much insight. There are some warnings which tells that configuration has to be done
Please find the warnings attached in the email.
Not able to find an active SLM for selected managed systems
No configured SLM
No common SLM system is regsitered for Managed Systems
The system / systems - SID have not beed registered in SLM
Instance -type missing in SMSY for an application server instance of system .
Regards,
Ershad Ahmed

Solman_setup and maintenance optimizer configuration

Hi
We've newly installed Solution Manager 7.0 EHP1 and we want to configure maintenance optimizer for approving SP. Is it mandatory to use solman_setup tcode or can we configure maintenance optimizer via tcode solution_manager and smsy.
Best Regards...

Hi
IT better if u use Solman_setup because it will run a wizard and do the needful and in a proper manner but still if u are expert and have already done the setting in previous version then u can it urslf.
Go through the links to know more about this solman_setup wizard settings.
New Guided Procedure for Configuration of SAP Solution Manager
https://websmp203.sap-ag.de/~sapidb/011000358700001927282008E
Demo on Guided Procedure for Configuration of SAP Solution Manager
https://websmp203.sap-ag.de/~sapidb/011000358700000316542009E/Procedure_Configuration.exe
Hope it will help ur more
Regards
Prakhar

Solman setup maintenance optimizer

Hi all,
I'm trying to setup my Solman Maintenance Optimizer to download SP.
When I read the configuration guide. It says the prerequisite is as below :-
The Maintenance Optimizer contains a lot of scenarios for maintenence procedures. The scenarios have different prerequisites.
Basic Prerequisites
   1.
      You have configured the Maintenance Optimizer in the SAP Solution Manager customizing.
      You must perform the following customizing activities for the Maintenance Optimizer:
            Assign S users for the SAP Support Portal.
            This activity specifies the S users (user ID for the SAP Service Marketplace) assigned to user IDs for the SAP Solution Manager.
            For more information see S Users in the Maintenance Optimizer.
            Enter user for communication with SAP Service and Support systems
2. This activity specifies the RFC connection SAP-OSS and the corresponding RFC user.
3.     You have assigned product versions to the system to be maintained, in the system landscape.
      You have assigned the systems to be maintained to a logical component.
      Note Note
      If you want to use a solution, you must assign the systems to be maintained, to the solution landscape. For more information, see Solution Manager System Landscape.
      End of the note.
   4.
      You have installed the Download Manager locally in your workplace. The Download Manager is in the SAP Software Distribution Center in the SAP Support Portal.
      Note Note
The item no2.
    This activity specifies the RFC connection SAP-OSS and the corresponding RFC user. <---- Is this mean I must have install and setup my Saprouter so that the SAP OSS connection is working before I can completed the SAP Solman Maintenance Optimizer setup?
Thanks.
Ck chai

Hi,
Just clarify my question.
I would like to run tcode "Solman_setup" to activate my Maintenance Optimizer for my new install SOLMAN & ECC6 System.
The reason is I need to download service pack for my ECC6 system.
Now I have some confusion on the "Solman_Setup" prerequisites
Prerequisites
You have installed the SAP Solution Manager and satisfied the following configuration prerequisites:
1)   The license key is installed. -
>OK
2)   The profile parameter /ICM_HOST_NAME_FULL or SAPLOCALHOSTFULL is set----
>OK
3)   The Transport Management System (TMS) is configured. -
> Not sure, Is this mean I have to setup my TMS in all the ECC6 system? Example --> DEV, QAS and PROD.
4)   The connection to the SAP backend system exists and works. -
> What is this mean? I need to Setup RFC connection manually using SM59? RFC connection from Solman to my ECC6-DEV,QAS, PRD?
5)   The SAP Solution Manager Java instance is up-to-date. --> not too sure. Can someone explain how this can be checked?
Thank you very much.
Ck chai

Missing System under Product Version at Maintenance Optimizer

Hello Colleagues,
We currently using SAP Solution Manager 4.0 SP11 for our SAP landscape.
For upgrade our new PI 7.1 system with EHP1 we need to download respective files at SAP Solution Manager with the Maintenance Optimizer.
Under Product Version (pull down menu) at Maintenance Optimizer (TC DSWP) I am only able to select the Solution manager itself. Not the already configured PI system under System Landscape (TC SMSY).
Any idea why I am not able to select the PI system?
Many thanks in advance!
Regards,
Jochen

Hello Jochen
1. Are your Solution Manger system and P1 system in same Solution(system landscape) ?
2. Or each of the above two systems has different solution ?
If yes in the first case, then this might be filter problem in initial screen of MOPz. On the right corner you can see filter options. click on it and check if are able to select all of your systems under this Solution in which you are running MOPz tcode.
If 02nd option is true, then you should run MOpz tcode in the correct solution, in which the system P1 is maintained.

AISUSER not assigned - Giving error during Maintenance Optimizer

Hi Tech Masters,
I am trying to set up Maintenance Optimizer on Solution Manager 7.0 SP15 ( WIndows 2003).
I am using wizard to do this. But I am getting error when I am trying to update "Assign S-User for SAP Support Portal functionality" ( Basically the AISUSER Tcode does ) :
When I am entering new entries, Its allowing me to enter User , SAP Customer No, but whenver I am trying to input Contact Person Its giving me the following error :
"Partner number 0000000000 was not found in table AICONTACTS."
Please help me out.
Thanks
Rabi Pal

Are you sure that you are entering the correct Customer Number and the corresponding S-userid is correct ?
May be this problem is related with several customer number administration ? check these notes
Note 1151450 - FAQ: Managing several customer numbers - Support Package 15
Note 1082010 - Administration of several customer numbers

How to approve in maintenance optimizer for download.

Dear All,
I need to download support pack and other software like SAP JVM Switch tool 1.0 from service market place.
It is asking for approval, Could you please specify which tcode is needed for maintenance optimizer and step by step
solution to approve the software.
Regards,
Dilip

Hi Dilip,
refer link :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/304f52c1-3aae-2910-6081-8d1deace58f3?QuickLink=events&overridelayout=true
look for section Maintenance optimizer - Screens , where step by step screen shots are provided to approve packages.
You need to go to Tcode DSWP --> go to correct/active solution --> Change management --> Maintenance optimizer
Make sure that the SAP user id you are trying to access have S user id linked , check Tcode AISUSER
Regards,

After EHP1 upgarde Maintenance Optimizer not work

Dear ,
In our solution Manger Maintenance Optimizer was proper configure and working . But After Implement or Upgrade EHP1 ,When I run tcode solution_manager for downloading some SP.Then click on Maintenance Optimizer its direct goes to http://hostname/client001......etc
After Implemention EHP1 on Solution manager 7.0 ,Should we configuer Maintenance Optimizer again. OR any post implementation step after EHP1 upgrade.
why it going to http://hostname/client001......
Now how I can download SP or Note from my solution manager in that EHP1 has been upgraded.
regards

I have upgrade solman 7.0 to EHP1 solman 7.01 SP26.
in etc/hosts IP address and Host name allready exist.
when Click on Maintenance Optimizer it goes on beow site
http://saprouter.domain.ext:8000/sap/public/myssocntl?sap-client=100
Where saprouter is my solman Host Name and Client 100 is where I am logging.
is any parameter changes required for resolve this problem
regards

How to delete the redundant sessions in Maintenance Optimizer?

Hi experts,
As it said in title, how to delete the expired sessions as the screenshot below in Maintenance Optimizer and keep SAP Solution Manager clean?
Thank you in advance.
Best Regards,
Pany

Hello,
Check here Deleting existing maintenance optimizer transactions
Please refer to the note 845433 , with the report CRM_ORDER_DELETE and transaction type SLMO,you can delete those maintenance optimizer, hope this help to you
BR,
K.

Maintenance Optimizer "local logical system is not defined"

hello, i would like to create a new maintenance transaction to upgrade from SAP ERP 6.0 to SAP ERP 6.0 Enhanced Package 4 i follow the steps in the "maintenance optimizer configuration guide" BUT when i click to create a new maintenance transaction i faced an error told me "local logical system is not defined"!!! so how i can define Local logical system?
thanks in advance
Amr M. Abdelazeez
Mobile: 002 011 40 85 200
Linked In: http://eg.linkedin.com/in/amrabdelazeez/
Alexandria, Egypt

This should be configuration issue, please check the description in the Implementation Guide (tr: SPRO) at following point:
SAP Solution Manager
- Basic Settings
   SAP Solution Manager System
    General Settings
     Maintain Logical Systems
After having maintained the logical systems, the error should not be displayed any longer.

Local logical system is not defined-Maintenance Optimizer Config

Hi,
When I try to configure Maintenance Optimizer in SAP Solution Manager 7, it gives me an error saying "Local logical system is not defined"
But I have created a Logical client using SCC4.
And the other thing is for this created client, does not have any users on this client, If I run,
SQL> select bname, UFKLAG from sapsr3.usr02 where mandt='400';
Answer is "no rows selected"
So I cannot even login in to my new client as well. I tried with SAP/PASS no use. I tried to re-set sap by deleteing it nothing helped.
my login/no_automatic_user_sapstar parameter also have 0 (But this is in Red, I dont know why its like that)
Please help me to rectify both these issues. Issue with Maintenance Optimizer and loggin in to the new client.
Thank you!

First of all, 'Logical System' and 'Logical Client' are two different things.
For Client Problem:
You did create a client in SCC4.
1. did you create a logical system via BD54 and then did you assign that logical system to this newly created client ?
2. did you perform a local client copy to put data into this new client from an old or from a standard client like 000 ?
If you didn't perform above two things, then please do. Only then, you will be able to see some data in this client and will be able to to select statements, And, obviously the SAP*/PASS login (login/no_automatic_user_sapstar should be 0 after reactivation of profile and restart of the instance)
For MOpz issue:
Could you please search in sap marketplace for any particular note specific to MOpz ?

Solution manager maintenance optimizer

Hi all,
I have what I think is an issue, and hoping someone could possibly point me in the direction to correct. I have setup our solution manager system and trying to get the maintenance optimizer option working fully. I have a java system that I pull the information from SLD perfectly fine, and it lists all installed software components via SMSY>SYSTEMS perfectly. I have assigned logical components etc. I can create a new maintenance optimizer transaction, select the proper system with assigned components, but when it lists the files to be downloaded automatically I expect to see alot more files available for download than it lists for me. I assume I am missing something, but not sure where to look.
Would anyone be able to possibly point me in the right direction on what I might be missing?
Regards,
Chris

Hi Markus,
The system is SAP EHP1 for SAP Netweaver 7.0. It has the following components installed and specified in logical components:
Adobe Document services
Application server Java
EP Core
Enterprise Portal
Along with the kernel files I also get the following files available for download via maintenance optimizer (6 in total)
FORUMS06_0-10005892.SCA SP06 for FORUMS 7.01
BP_PROJ_PORT_DESIGNCOLL
BPPPMDC17_0-10003174.SCA BP PROJ., PORT. & DCOL. 4.0 SP17
BP ERP05 PROJ SELF-SERV
BPERP5PSS17_0-10003284.SCA BP ERP05 PROJ SELF-SERV 1.0 Support Package 17
BP ERP05 MAINTENANCE TECH
BPERP5MTC07_0-10004455.SCA SP07 for BP ERP05 MAINTENANCE TECH 1.2
BP ERP SITE TECHNICIAN
BPIS7TST07_0-10004458.SCA SP07 for BP ERP SITE TECHNICIAN 1.20
BP ERP ICM ANALYST
BPIS7ICMAL06_0-10006119.SCA SP06 for BP ERP ICM ANALYST 1.41
When I look at installed system components via SMSY it correctly shows everything installed which includes:
ADOBE DOCUMENT SERVICES 7.01 0006 SP006 ADOBE DOCUMENT SERVICES 7.00
BI BASE SERVICES 7.01 0006 SP006 BI BASE SERVICES 7.01
BI INFORM. BROADCASTING 7.01 0006 SP006 BI INFORM. BROADCASTING 7.00
BI META MODEL REPOSITORY 7.01 0006 SP006 BI META MODEL REPOSITORY 7.01
BI REPORTING AND PLANNING 7.01 0006 SP006 BI REPORTING AND PLANNING 7.01
BI UNIVERSAL DATA INTEGRATION 7.01 0006 SP006 BI UNIVERSAL DATA INTEGRATION BI UDI 7.01
BI WEB APPLICATIONS 7.01 0006 SP006 BI WEB APPLICATIONS 7.00
BI WEBDYNPRO ALV 7.01 0006 SP006 BI WEBDYNPRO ALV 7.01
BP ERP FIN MDM 1.40 0006 SP006 BP for Financial MDM 1.40
BP ERP HR EIC 1.40 0006 SP006 BP für HR Employee Interaction Center 1.40
BP ERP ICM ANALYST 1.41 0004 SP004 BP for ICM-Analyst 1.41
BP ERP RECRUITER 1.40 0006 SP006 BP for Recruiter 1.40
BP ERP RECRUITING ADMIN 1.40 0006 SP006 BP for E-Recruiting Administrator 1.40
BP ERP SITE TECHNICIAN 1.20 0006 SP006 BP for Site Technician (Telecommunications) 1.20
BP ERP UT XSS 1.40 0006 SP006 BP ERP UT Definition für Self Service BP 1.40
BP ERP05 BUS UNIT ANALYST 20 1.0 0017 SP017 BP for Business Unit Analyst (mySAP ERP) 1.0
BP ERP05 COMMON PARTS 1.41 0006 SP006 BP ERP05 COMMON PARTS 1.41
BP ERP05 ESS 1.41 0006 SP006 BP for Employee Self-Service 1.41
BP ERP05 HR ADMINISTRATOR 1.41 0006 SP006 BP for HR Administrator (mySAP ERP) 1.41
BP ERP05 MAINTENANCE TECH 1.2 0006 SP006 BP for Maintenance Technician 1.2
BP ERP05 MSS 1.41 0006 SP006 BP for Manager Self-Service 1.41
BP ERP05 PROJ SELF-SERV 1.0 0016 SP016 BP for Project Self-Service (mySAP ERP) 1.0
BP ERP05 SELF-SERV ADMIN 1.0 0017 SP017 BP for Self-Service Administrator (my SAP ERP) 1.0
BP ERP05 TALENT DEV 1.01 0010 SP010 BP for Talent Development Specialist 1.01
BP_PROJ_PORT_DESIGNCOLL 4.0 0015 SP015 BP for Project Portfolio Management and Design Collaboration 4.0
CAF EU 7.01 0006 SP006 SAP Net Weaver End User 7.01
DI BUILD TOOL 7.01 0000 SAP BUILD TOOL 7.01
DI CHANGE MANAGEMENT SERVER 7.01 0006 SP006 CHANGE MANAGEMENT SERVER and SXMAN 7.00 701
DI COMPONENT BUILD SERVER 7.01 0006 SP006 COMPONENT BUILD SERVER 7.01
DI DESIGN TIME REPOSITORY 7.01 0006 SP006 DESIGN TIME REPOSITORY 7.01
FORUMS 7.01 0005 SP005 FORUMS 7.01
J2EE ENGINE BASE TABLES 7.01 0006 SP006 BASETABLES
J2EE ENGINE CORE TOOLS 7.01 0006 SP006 CORE TOOLS J2EE ENGINE
JAVA LOG VIEWER 7.01 0006 SP006 SAP JAVA LOG VIEWER 7.01
JAVA SP MANAGER 7.01 0006 SP006 JAVA SP MANAGER 7.00
KMC BASE COMPONENTS 7.01 0006 SP006 KMC BASE COMPONENTS 7.01
KMC COLLABORATION 7.01 0006 SP006 KMC COLLABORATION 7.01
KMC CONTENT MANAGEMENT 7.01 0006 SP006 KMC CONTENT MANAGEMENT 7.01
KMC UI LAYER 7.01 0006 SP006 KMC UI LAYER 7.01
KMC WEB PAGE COMPOSER 7.01 0006 SP006 KMC WEB PAGE COMPOSER 7.01
LIFECYCLE MGMT PORTAL 7.01 0006 SP006 LIFECYCLE MGMT PORTAL 7.01
LIFECYCLE MGMT TOOLS 7.01 0006 SP006 LIFECYCLE MGMT TOOLS 7.01
MI ADMINISTRATION 7.01 0006 SP006 MI ADMINISTRATION 7.01
MI DRIVERS 7.01 0006 SP006 MI DRIVERS 7.00
MI WD LAPTOP 7.01 0006 SP006 Net Weaver Mobile Infrastructure Web Dynpro LAPTOP 7.00
PDK PORTAL SERVICES 7.01 0006 SP006 PDK PORTAL SERVICES 7.00
PORTAL CORE SERVICES 7.01 0006 SP006 EPBC 7.01
PORTAL FRAMEWORK 7.01 0006 SP006 EPBC2 7.01
PORTAL PLATFORM 7.01 0006 SP006 EP - Portal Server PORTAL 7.01
PORTAL WEB DYNPRO 7.01 0006 SP006 PORTAL WEB DYNPRO 7.01
RTC 7.01 0006 SP006 RTC 7.00
RTC-STREAM 7.01 0006 SP006 RTC-STREAM 7.00
SAP CAF 7.01 0006 SP006 SAP CAF 7.01
SAP CAF-KM 7.01 0006 SP006 SAP CAF-KM 7.01
SAP CAF-UM 7.01 0006 SP006 SAP CAF-UM 7.01
SAP CPS BASIC (SCHEDULER) 7.01 0004 SP004 Job scheduling capabilities of SAP NetWeaver 7.01
SAP ESS 603 0006 SP006 SAP ESS 603
SAP INTERNET KNOWLEDGE SERVLET 7.01 0006 SP006 SAP Internet Knowledge Servlet 7.00 (SAP J2EE IKS)
SAP J2EE ENGINE 7.01 0006 SP006 SAP J2EE Engine 7.01
SAP J2EE ENGINE CORE 7.01 0006 SP006 SAP J2EE ENGINE CORE 7.01
SAP JAVA TECHNOLOGY S OFFLINE 7.01 0006 SP006 SAP JAVA TECHNOLOGY S OFFLINE SAP TECH S OFFLINE 7.01
SAP JAVA TECHNOLOGY SERVICES 7.01 0006 SP006 SAP JAVA TECHNOLOGY SERVICES (Schicht 3 Dummy) SAP JAVA TECH SERVICES
SAP MI CLIENT 7.01 0006 SP006 SAP Mobile Infrastructure Client 7.0
SAP MSS 600 0017 SP017 SAP MSS 600 (Manager Self Services)
SAP PCUI_GP 603 0006 SP006 SAP PCUI_GP 603
SAP SOFTW. DELIV. MANAGER 7.01 0000 SAP JAVA SL 7.01
SOFTWARE LIFECYCLE MANAGEMENT 7.01 0006 SP006 SOFTWARE LIFECYCLE MANAGER 7.01
UME ADMINISTRATION 7.01 0006 SP006 UME ADMINISTRATION 7.01
UWL COLL PROCESS ENGINE 7.01 0006 SP006 UWL COLL PROCESS ENGINE 7.01
VISUAL COMPOSER BASE 7.01 0006 SP006 VISUAL COMPOSER BASE 7.00
VISUAL COMPOSER BI KITS 7.01 0006 SP006 VISUAL COMPOSER BI KITS 7.00
VISUAL COMPOSER FLEX 7.01 0006 SP006 VISUAL COMPOSER FLEX 7.00
VISUAL COMPOSER FRAMEWORK 7.01 0006 SP006 VISUAL COMPOSER FRAMEWORK 7.00
VISUAL COMPOSER GP KITS 7.01 0006 SP006 VISUAL COMPOSER GP KITS 7.00
VISUAL COMPOSER XX KITS 7.01 0006 SP006 VISUAL COMPOSER XX KITS 7.00
WEB DYNPRO EXTENSIONS 7.01 0006 SP006 WEB DYNPRO EXTENSIONS 7.01
I expect to see more than the 6 previously mentioned files available for download, also the option for EHP2 which I know is available, or am I wrong in expecting this.

Problem with Maintenance Optimizer...

Hello gurus,
I had a problem which I didn´t reached a solution...
When I create a new maintenance optimizer transaction and choose, on first step "Plan Maintenance", a type of Product Version I don´t have all systems which I configure on this Product Version on SMSY (System Landscape Directory).
For instance: I configure in SMSY the Product version (group) SAP ECC 6.0 which contains three systems DEV ; QAS ; PRD.
When I open/create a new maintenance optimizer transaction and choose the SAP ECC 6.0 I only see one system, the DEV system, within his, and I want to see all three systems which I configure in SMSY!
Help me please...! TKS
Best regards,
Joao Dimas

Hi Vijay,
When I press in that URL - http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000679533& - does not appear anything about maintenance optimizer guide... it show me a notify "This folder needs to be reviewed" and I can´t see anything like you describe... I´m newest in SAP and still I have difficulties on search sometimes some things...
The link above, have you sure that's correct?
What´s the exactly name of document that you refer??
Thanks in advance,
Best regards,
Joao Dimas

Error when Launching the Maintenance optimizer

Hello,
When launching the Maintenance optimizer of solman 7.1, in the step Cionfirm Target i got the following dump:
The followin error text was processed in SD1 the systm: Value loss during allocation.
The error occurred on the application server SD1ODYLSV1_SD1_00 and in the work process. 9
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: GET_2ND_CHECK_RESULT of program CL_MO_SMP_ADAPTER=============CP
Method: LOAD_IMPACT_ASC of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: IF_COMPONENTCONTROLLER~LOAD_IMPACT_ASC of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: ONACTIONLOAD_IMPACT of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
Method: DO_HANDLE_ACTION_EVENTS of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
In the trace file of the Work process teh following error was found:
A ABAP Program CL_MO_SMP_ADAPTER=============CP        .
A Source CL_MO_SMP_ADAPTER=============CM00A      Line 19.
A Error Code CONVT_DATA_LOSS.
A Module $Id: //bas/720_REL/src/krn/runt/abxacnv.c#4 $ SAP.
A Function ab_xaCloseSimpleR Line 725.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A exceeded soft limit for RUDILOCKS (user: SAPADMIN    , ta:                     )
I tried to find something about the *RUDILOCKS * without success.
Do you have any suggestion to resolve the issue?

Hi,
Check SAP note 1505832.
Thanks
Sunny

Maintenance Optimizer TCode

Similar Messages

Maybe you are looking for