Maintenance Optimizer - Under Change Management in solman_workcenter

Hello,
If I go to transaction solution_manager and navigate to the Maintenance Optimizer in our solman system, I see dozens of lines of maintenance requests. Furthermore, I go start a new transaction and I will be shown the appropriate logical components which are assigned to the solution landscape that I chose when entering solution_manager/dswp.
However, when I use solman_workcenter instead (which is the direction that we want to go), and then go to the change management tab, and click on maintenance optimizer, I am not shown any maintenance requests. Furthermore, when I try to start a new transaction, the logical components are not displayed and I cannot choose the system for which I want to the transaction for.
Am I missing some configuration or setup within SOLMAN_WORKCENTER which is preventing me from being placed into the appropriate Solution Landscape?
Thank you.

John,
Looks like this is an authorization issue.
Please check the user has these following roles.
SAP_SMWORK_ADMINISTRATOR_COMP
SAP_SMWORK_BASIC
SAP_SMWORK_BPM
SAP_SMWORK_CHANGE_MAN
SAP_SMWORK_DIAG
SAP_SMWORK_INCIDENT_MAN
SAP_SMWORK_JOB_MAN
SAP_SMWORK_LANDSCAPE_MAN
SAP_SMWORK_SETUP
SAP_SMWORK_SYS_ADMIN
SAP_SMWORK_SYS_MON
It's working fine for us.
Our user has these above said roles.
Regards,
Sanjai

Similar Messages

How to configuration Maintenance Optimizer in Solution Manager 4.0?

Hi All,
Can any tell me How to configuration Maintenance Optimizer in Solution Manager 4.0?
If any one having the document for same then please give me.
My mail id is : - <email address removed by moderator>
Thanks a lot,
Harshal

Hello Harshal,
Please go to service.sap.com/solutionmanager, click on the "maintenance optimizer" link, then a step-by-step guide is available there.
Another document is attached in Note 990534.
If you have further issues, Note 1024932 might be a good starting point.
Best regards,
Victor

Error with Maintenance Optimizer in Solution Manager 4.0

Hi, I am configuring Solution Manager for download SP, I check marketplace and download the guide, when I try to download a SP following message show me:
"Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM)."
I go to sm59, verify RFC SAP-OSS with correct data, I found at guide following Host :
/H/54.16.44.50/S/sapdp99/H/54.62.200.35/S/
When I try press Connection Test Buttom I can not connect to SAP.
Do you know which can be my error? .....
Regards.

Hi,
Following the note 1024932
Steps to do before configre the maintance optimizer you need to configure sattilite systems in solution manager.
go to SMSY and configre R\3 systems.For these systems you need to create RFC connections and Logical comp.
http://service.sap.com/rkt-solman
for tutors and PDFs how to set up MOPZ.
Points if it helpfull
Regards
Neni

Maintenance Optimizer in Solution Manager 3.2

We are experiencing the sheer joy that Solution Manager is, while trying to configure the Maintenance Optimizer.
From the document MOPZ_Component32_vers4.pdf document that is for SP15 for SolMan 3.2, we are confused by this section on Page 6.
"Your system administrator must have performed the following Customizing activities:
&#56256;&#56440; Maintain User for Communication with SAP Service and Support
&#56256;&#56440; Assign S-User for SAP Support Portal functionality or with the transaction AISUSER
Your S-User must be assigned to the same customer or corporate number as
the S-User which your administrator entered in the SAP-OSS RFC destination."
We just don't understand the last sentence. You enter an S-User in the SAP-OSS RFC destination in sm59?? Where??
Currently in AISUER I have an entry, with my SAP User ID (eg. FRED) and my S-User ID in the 'Contact Person' column (e.g. 123456, my S000123456, shortened).
We can access the Maintenance Optimizer, but packages are not visible there. No error is reported. I have the necessary Roles. Are these the correct values?
Our SAPOSS Rfc is functioning, as user OSS_RFC. What the document is trying to say about the relationship between this RFC and a service marketplace S-User is unclear.
Any assistance appreciated. Remember, SM 3.2!

Hi,
You can download this to desktop or you can transfer same to server(/usr/sap/trans/EPS/in/)
You have to uncar using SAPCAR.
Also you can directly upload from front-end using spam/saint as well.
Then apply the same using spam/saint.
Let us know if you need any clarification.
Regards

Specifying Critical Transport Objects under Change Management Extend config

I'm trying to configure Change Management and I am in SPRO under SAP Solution Manager -> Config -> Scenario-specific settings -> Change Managment-> Extended config -> Change Request Management -> Specify Critical Transport Objects.
It states that you need to select the system/clients for which you want to specify critical transport objects. however, i do not see my systems listed there. I'm assuming i've missed a prior step somehow.
Any help would be appreciated! Thank you!
Margo

Hi.
There are several things necessary to make the system appear in this transaction (/N/TMWFLOW/CMSCONF -> critical obejcts)
You need:
- a smi project
- a logical component assigned to that project which contains your systems
- at least one system within your logical component of type "developement system"
- the project needs to be released for change request management (tx: solar_project_admin, "activate change request management")
Hope this helps.
/cheers

Upgrade button missing in maintenance optimizer of Solution manager

Hi,
We are going to perform upgrade R/3 4.7*110 Non uniocde to ERP 6.0 EHP non unicode.
We used SAP EHP 1 for SAP Solution Manager 7.0 and support packake for SAP EHP 1 for SAP Solution Manager 7.0 is 24.
Applied following OSS notes pertaining to MOPZ :
0001450757
0001461849
0001485385
0001548530
0001590226
COnfigured using tx code SMSY - Product System is SAP ERP and product version is SAP ERP 2004.
Created logical components and assigned to <SID> of R/3 4.7 Development system.
Then created solution and configured solution landscape . Logical component was assigned to solution landscape.
Then clicked on "Create new Optimizer transaction"
Then select product version : ERP 2004
Then select Product system and selected <SID>.
But only "maintenance" button was displayed.
However "Upgrade with enhancement package" button is not showing.
Please help us the solution.
Thanks
ap

A Prasad Rao wrote:
Hi Sunny
> For R/3 4.7*110 product name is ERP and product version is ERP 2004
>
> I want upgrade button or upgrade with Enhancement package button should appear
>
> It seems we need to apply some OSS notes but coul not find anything becasue SP stack for solman installed was 24.
>
> Please help
> Thanks and Regards
> APR
As I said earlier, you need to register it as ERP 6.0 only to get Enhancement Package installation button. There is no other option for it. If you want to confirm then check How to install EHP4 guide on http://service.sap.com/erp-ehp.
Thanks
Sunny

Solution Manage Maintenance Optimizer Installation

Hi,
I am in the process of trying to configure maintenance optimizer for solution manager. I have performed the following pre-requisites as specified in the SAP documentation
1. Support Package 09 for Solution manager
2. Applied OSS Notes 1024932, 1008717, 0950974
3. Set up user with appropriate roles and authorizations SAP_MAINT_OPT_ADMIN
4. Activated BC Sets as dictated by OSS note 990534
5. Define a Solution
6. Assign S-user to MO user
7. Check RFC Destination and assign S-user Login details
When I enter the solution and attempt to configure MO via Change Management -> Support Package Stacks, I get as far as the screen where you select the appropriate product version. I select the product and click to continue however I receive the following message
<i>'Condition REQUEST_IN_PROCESS is not checked without Change Management integration'</i>
Can anyone give me any suggestions to resolve this error.

Hi Stoecker,
I am also getting same problem.i followed that note which you have mentioned.
but where do i deselet the "íntegr' field?i am not getting
can plz exploain me on this.
and also one thing i want to add SAP ECC under systems in smsy transaction.
when i am trying to add it is asking for Product key.
can u plz provide me the key?
Thanx in advance.
Thanks and Regards,
Vinnu.

SOL MAN - Maintenance Optimizer

Hi all
I configured Maintenance Optimizer in Solution Manager 4.0 but when launching:
dswp -> change management -> support package stack - > maintenance optimizer
select product versrion
select system
-> continue
only procedure 8000000x saved displayed on status bar. No further screen is displayed.
I read note 1032322 and attached file Setup_Maintenance_Optimizer.zip
RFC connection is working well.
Is anything missing in customizing?
Thanks
R

Hi raffaele,
I'm getting problems with setting RFC connection. Can i get your help ?
topic: Maintance optimizer - connection settings
mail: [email protected]
Thanks in advance,
Dimitry Haritonov

Change Management. Cannot go to the next phase ... And common questions.

Hi dear colleagues!
Here there are some unpleasant problems which has arisen during Change Management functions realization...
1. After approving of Urgent Correction by so-called "Change Manager", "developer" couldn't set it status "in development" -> and begin corrections in DEV system. It outputs in status bar: "NO ACTIONS IN THE WORK LIST".
2. How should i link some urgent correction (or simply Service Message) to a specific Maintenance Cycle?
The same problem I cannot go to the next phase, system outputs that "No Maintenance Cycle is open for the current system".
3. And please can u explain in a simple words: Should i always make a maintenance project for using "Change Management" functions?
4. Can we use "Change Management" for 4.0C (vers. of satellite) systems?
Any help and tips would really appreciate.
Best regards,
Vladimir

Hi,
For configuring change management, you will have to follow the SPRO guidelines for setting up transport routes between satellite systems.
Well i list down the activities that you need to do. Details you can find in SPRO -- > SAP Solution Manager --> Scenario Specific Settings --> Change Request Management --> Standard Configuration --> transport management System
1) Activate Extended transport control by setting System Parameter CTC=1 in STMS --> Systems
2)Create Client specific transport route between satellite systems
3) Ensure that all the systems in the domain have the same transport group.
4)Configure or activate Single transport Strategy in STMS --> Overview --> transport routes.
5)Activate TMS Trusted services in STMS --> Overview --> Systems --> Goto --> transport Domain --> Management Tab page --> Security option group box.
Besides these activities, you will have to execute the SPRO IMG Activity
SAP Solution Manager --> Basic Settings --> SAP Solution Manager System --> Activate Integration with Change Request Management
For activity Intigration Solution Manager make the following entry
APPL: Change Request Management
RFC Destination : NONE
For activity Integration Change Request Management
make the entries in table BCOS_CUST as g
iven in the IMG instruction.
Now in SOLAR_PROJECT_ADMIN you can activate a maintenance project for change management by going to System Landscape --> Project Cycle
Click the check box Activate Change request Management.
(NOTE: The above option comes only in Solution Manager 4.0, for SOLMAN 3.2 you can directly create maintenance cycle in /n/tmwflow/cmsconf --> Distribution Routes --> Project Landscape group box .)
Now you can create a maintenance cycle by clickin on the button Create Task List in project cycle tab page.
Navigate to task list and activate the tasklist (Maintenance Cycle) by clicking on the status button.
Now while creating change request ensure that you are assigning the correct ibase /component of the production system in the satellite system landscape. You have to enter the ibase component of the client of the production system to whcih the client specific transport route has been made. You can find this number in transaction IB52
Hope now u can move on with CHARM.

AISUSER not assigned - Giving error during Maintenance Optimizer

Hi Tech Masters,
I am trying to set up Maintenance Optimizer on Solution Manager 7.0 SP15 ( WIndows 2003).
I am using wizard to do this. But I am getting error when I am trying to update "Assign S-User for SAP Support Portal functionality" ( Basically the AISUSER Tcode does ) :
When I am entering new entries, Its allowing me to enter User , SAP Customer No, but whenver I am trying to input Contact Person Its giving me the following error :
"Partner number 0000000000 was not found in table AICONTACTS."
Please help me out.
Thanks
Rabi Pal

Are you sure that you are entering the correct Customer Number and the corresponding S-userid is correct ?
May be this problem is related with several customer number administration ? check these notes
Note 1151450 - FAQ: Managing several customer numbers - Support Package 15
Note 1082010 - Administration of several customer numbers

Maintenance Optimizer in SAP Solution Manager

what is Maintenance Optimizer in SAP Solution Manager and what are its benefits

Hi
even this may be useful
Ensure your Solution manager system is at the most recent Support Package Level, specifically ST 400 Patch 11, to reduce note application time
Download from oss most recent step-by-step setup guide
Oss note 1024932
Oss Note 1008717 ( N/A )
Relevant up to SP11 for Basis 700
OSS Note 950975 support for IE7 ( N/A we are using GUI)
Oss note 975510 corrections for snote ( Via OSS not snote )
Oss note 1004691 corrections for snote *** Corrections for 975510 ( UP TO SAP_BASIS 11 ) N/A
Common problem notes, but not critical for Maint Opt
0998987: Maintenance Optimizer: Empty error messages
1022072: Maintenance Optimizer: "No Data Available" message o See note 1025381 before applying 1022072.
1020789: Maintenance Optimizer: Allow all systems to be selected
1020802: Maintenance Optimizer List displays incomplete data
1024105: Maintenance Optimizer: two "Cancel" buttons
1025381: Maintenance Optimizer: Link to additional download files
1029453: Maintenance Optimizer - Wrong status displayed
1030405: Maintenance Optimizer: Browser opens in background
1030498: Maintenance Optimizer - IBase is not active
1032463: Maintenance Optimizer: Internet Explorer Script Error
1042704: Maintenance Optimizer: Display only employee partners
Partner Scenario SOLMAN4.0 Only
Os note 1021275 ( RFC Destinations ) N/A ST 400 11
Oss Note: 997780 ( N/A we are at 11 use note 939897 for ST400 SP11 Application )
Relevant for ST400 SP09 ( N/A ST 400 11 )
User:
To setup you must have SAP_ALL
General Users: ( Oss note 1032322 )
Must be assigned to role SAP_MAINT_OPT_ADMIN
Auth Object: D_SOL_VSBL ( visibility of solutions)
Auth Object: CRM_ORD_PR ( for CRM stuff )
/spro
As of Support Package level ST 400 SP10:
Call Transaction SPRO -> SAP Reference IMG ->SAP Solution Manager -> Advanced Configuration -> Basic Settings -> SAP Solution Manager System -> Change Management -> Set Up Maintenance Optimizer
This IMG activity refers to the SAP Note 990534: Solution Manager Maintenance Optimizer: BC Set. Follow the instructions in this SAP Note
N/A as of ST400 SP11
Define a Solution:
Solution_Manager Select Solution Overview New.
Enter Descriptive Name ( Ex. GTS Landscape )
Hit Continue
Select Solution Landscape Maintenance
Select System Groups & Logical Components on the Left hand Side
Select Solution Landscapes and pick the one you created
Define the solutions for that landscape
Highlight each item and click Logical Component (You must have a valid license to set this up)
Assign S-User
Transaction: AISUSER
Enter you user id and your SUSER ID for downloading
Create another SAPOSS Connection called SAP-OSS with S-User assigned
Call SOLUTION_MANAGER
Select Solution Overview
Select the solution you want to work with
Select Change Management Support Package Stacks
Click Maintenance Optimizer around middle of screen
Select the solution you want to get Sps for
Go to OSS and add the files to download basket
When done return to screen and hit continue
Select - Confirm files in Download Basket
Error message comes if your sap user and your oss user are not setup in AISUSER screen
Now go to SAP Download Manager ( On your local pc ) and download the files you just confirmed of course using the same S-User id you just added them to the basket with
Apply support packages via spam per normal process
Return to the SOLUTION_MANAGER window select the landscape you are working on
Hit Maintenance Optimizer List
Choose the maintenance transaction you are working on
You will see a list of the confirmed and downloaded sps you selected
Once you apply these to the system using SPAM you will change the status of implementation to Completed and Hit Save
This completes this activity
If you wish to do more work you will have to create a new transaction.
[Edit section] Add A New Instance to Maintenance Optimizer
Sign into Solution Manager
Ensure new instance has valid license installed and logical clients assigned
Select Landscape Components
Right Click Systems
     Select Create new system with assistant
Enter
SID / Description / Product Type / Installation Number ( Get this from SLICENSE in system you are setting up )
Next enter Sys # & MEssgae Server and hit continue
Next select Generate RFC Destinations & Assign Logical Components & Enter Client #
I always get a problem saving since SLD is not setup ignore and continue
Highlight the system you just added under Systems SAP Global Trade Services
Select Assignment to Logical Components
Now add additional software such as Net weaver ABAP & JAVA if your primary setup was of another type ( ex. GTS )
Highlight the system you wish to update under Systems and hit change
     Select Header Data
     Click Installed Product Versions
     In the product box add whatever you require for this system
     Select the version from the 2nd box and hit copy
Ex.
If you cannot setup the trusted system here is a workaround:
Create User in Target for Trusted System RFC from SM1
     User:      <Username>
     Pass:   <Pass>
     Type: Communication
Use this when setting up the trusted connection, remove the trust and use this CPIC user info for the RFC.
Generate RFCs and ensure SMSY setup is done for SID in Solution manager
Now Create a New Solution For your instance:
Go to SOLUTION_MANAGER transaction
     Select NEW
     Give Descriptive name: ex. GTS Landscape
Under Solution Landscape
     Select Solution Landscape Maintenance
     Select System Groups and Logical Components Tab
          Open Solution Landscapes
               Select the one you just defined (GTS Landscape)
SOLTION_MANAGER
Select Change Management Support Package Stacks
Select Maintenance Optimizer
Select the Product Version
     GTS 7.1
Select the System Type SID
From here you will be prompted to go to service marketplace and add the items you wish to install. You can do this beforehand as well, be sure to use the same Suser you setup in AISUSER with your sap login
It will ask you to confirm the basket, once you do that you install them normally.
Download with sap download manager, ftp and apply

Solution manager maintenance optimizer

Hi all,
I have what I think is an issue, and hoping someone could possibly point me in the direction to correct. I have setup our solution manager system and trying to get the maintenance optimizer option working fully. I have a java system that I pull the information from SLD perfectly fine, and it lists all installed software components via SMSY>SYSTEMS perfectly. I have assigned logical components etc. I can create a new maintenance optimizer transaction, select the proper system with assigned components, but when it lists the files to be downloaded automatically I expect to see alot more files available for download than it lists for me. I assume I am missing something, but not sure where to look.
Would anyone be able to possibly point me in the right direction on what I might be missing?
Regards,
Chris

Hi Markus,
The system is SAP EHP1 for SAP Netweaver 7.0. It has the following components installed and specified in logical components:
Adobe Document services
Application server Java
EP Core
Enterprise Portal
Along with the kernel files I also get the following files available for download via maintenance optimizer (6 in total)
FORUMS06_0-10005892.SCA SP06 for FORUMS 7.01
BP_PROJ_PORT_DESIGNCOLL
BPPPMDC17_0-10003174.SCA BP PROJ., PORT. & DCOL. 4.0 SP17
BP ERP05 PROJ SELF-SERV
BPERP5PSS17_0-10003284.SCA BP ERP05 PROJ SELF-SERV 1.0 Support Package 17
BP ERP05 MAINTENANCE TECH
BPERP5MTC07_0-10004455.SCA SP07 for BP ERP05 MAINTENANCE TECH 1.2
BP ERP SITE TECHNICIAN
BPIS7TST07_0-10004458.SCA SP07 for BP ERP SITE TECHNICIAN 1.20
BP ERP ICM ANALYST
BPIS7ICMAL06_0-10006119.SCA SP06 for BP ERP ICM ANALYST 1.41
When I look at installed system components via SMSY it correctly shows everything installed which includes:
ADOBE DOCUMENT SERVICES 7.01 0006 SP006 ADOBE DOCUMENT SERVICES 7.00
BI BASE SERVICES 7.01 0006 SP006 BI BASE SERVICES 7.01
BI INFORM. BROADCASTING 7.01 0006 SP006 BI INFORM. BROADCASTING 7.00
BI META MODEL REPOSITORY 7.01 0006 SP006 BI META MODEL REPOSITORY 7.01
BI REPORTING AND PLANNING 7.01 0006 SP006 BI REPORTING AND PLANNING 7.01
BI UNIVERSAL DATA INTEGRATION 7.01 0006 SP006 BI UNIVERSAL DATA INTEGRATION BI UDI 7.01
BI WEB APPLICATIONS 7.01 0006 SP006 BI WEB APPLICATIONS 7.00
BI WEBDYNPRO ALV 7.01 0006 SP006 BI WEBDYNPRO ALV 7.01
BP ERP FIN MDM 1.40 0006 SP006 BP for Financial MDM 1.40
BP ERP HR EIC 1.40 0006 SP006 BP für HR Employee Interaction Center 1.40
BP ERP ICM ANALYST 1.41 0004 SP004 BP for ICM-Analyst 1.41
BP ERP RECRUITER 1.40 0006 SP006 BP for Recruiter 1.40
BP ERP RECRUITING ADMIN 1.40 0006 SP006 BP for E-Recruiting Administrator 1.40
BP ERP SITE TECHNICIAN 1.20 0006 SP006 BP for Site Technician (Telecommunications) 1.20
BP ERP UT XSS 1.40 0006 SP006 BP ERP UT Definition für Self Service BP 1.40
BP ERP05 BUS UNIT ANALYST 20 1.0 0017 SP017 BP for Business Unit Analyst (mySAP ERP) 1.0
BP ERP05 COMMON PARTS 1.41 0006 SP006 BP ERP05 COMMON PARTS 1.41
BP ERP05 ESS 1.41 0006 SP006 BP for Employee Self-Service 1.41
BP ERP05 HR ADMINISTRATOR 1.41 0006 SP006 BP for HR Administrator (mySAP ERP) 1.41
BP ERP05 MAINTENANCE TECH 1.2 0006 SP006 BP for Maintenance Technician 1.2
BP ERP05 MSS 1.41 0006 SP006 BP for Manager Self-Service 1.41
BP ERP05 PROJ SELF-SERV 1.0 0016 SP016 BP for Project Self-Service (mySAP ERP) 1.0
BP ERP05 SELF-SERV ADMIN 1.0 0017 SP017 BP for Self-Service Administrator (my SAP ERP) 1.0
BP ERP05 TALENT DEV 1.01 0010 SP010 BP for Talent Development Specialist 1.01
BP_PROJ_PORT_DESIGNCOLL 4.0 0015 SP015 BP for Project Portfolio Management and Design Collaboration 4.0
CAF EU 7.01 0006 SP006 SAP Net Weaver End User 7.01
DI BUILD TOOL 7.01 0000 SAP BUILD TOOL 7.01
DI CHANGE MANAGEMENT SERVER 7.01 0006 SP006 CHANGE MANAGEMENT SERVER and SXMAN 7.00 701
DI COMPONENT BUILD SERVER 7.01 0006 SP006 COMPONENT BUILD SERVER 7.01
DI DESIGN TIME REPOSITORY 7.01 0006 SP006 DESIGN TIME REPOSITORY 7.01
FORUMS 7.01 0005 SP005 FORUMS 7.01
J2EE ENGINE BASE TABLES 7.01 0006 SP006 BASETABLES
J2EE ENGINE CORE TOOLS 7.01 0006 SP006 CORE TOOLS J2EE ENGINE
JAVA LOG VIEWER 7.01 0006 SP006 SAP JAVA LOG VIEWER 7.01
JAVA SP MANAGER 7.01 0006 SP006 JAVA SP MANAGER 7.00
KMC BASE COMPONENTS 7.01 0006 SP006 KMC BASE COMPONENTS 7.01
KMC COLLABORATION 7.01 0006 SP006 KMC COLLABORATION 7.01
KMC CONTENT MANAGEMENT 7.01 0006 SP006 KMC CONTENT MANAGEMENT 7.01
KMC UI LAYER 7.01 0006 SP006 KMC UI LAYER 7.01
KMC WEB PAGE COMPOSER 7.01 0006 SP006 KMC WEB PAGE COMPOSER 7.01
LIFECYCLE MGMT PORTAL 7.01 0006 SP006 LIFECYCLE MGMT PORTAL 7.01
LIFECYCLE MGMT TOOLS 7.01 0006 SP006 LIFECYCLE MGMT TOOLS 7.01
MI ADMINISTRATION 7.01 0006 SP006 MI ADMINISTRATION 7.01
MI DRIVERS 7.01 0006 SP006 MI DRIVERS 7.00
MI WD LAPTOP 7.01 0006 SP006 Net Weaver Mobile Infrastructure Web Dynpro LAPTOP 7.00
PDK PORTAL SERVICES 7.01 0006 SP006 PDK PORTAL SERVICES 7.00
PORTAL CORE SERVICES 7.01 0006 SP006 EPBC 7.01
PORTAL FRAMEWORK 7.01 0006 SP006 EPBC2 7.01
PORTAL PLATFORM 7.01 0006 SP006 EP - Portal Server PORTAL 7.01
PORTAL WEB DYNPRO 7.01 0006 SP006 PORTAL WEB DYNPRO 7.01
RTC 7.01 0006 SP006 RTC 7.00
RTC-STREAM 7.01 0006 SP006 RTC-STREAM 7.00
SAP CAF 7.01 0006 SP006 SAP CAF 7.01
SAP CAF-KM 7.01 0006 SP006 SAP CAF-KM 7.01
SAP CAF-UM 7.01 0006 SP006 SAP CAF-UM 7.01
SAP CPS BASIC (SCHEDULER) 7.01 0004 SP004 Job scheduling capabilities of SAP NetWeaver 7.01
SAP ESS 603 0006 SP006 SAP ESS 603
SAP INTERNET KNOWLEDGE SERVLET 7.01 0006 SP006 SAP Internet Knowledge Servlet 7.00 (SAP J2EE IKS)
SAP J2EE ENGINE 7.01 0006 SP006 SAP J2EE Engine 7.01
SAP J2EE ENGINE CORE 7.01 0006 SP006 SAP J2EE ENGINE CORE 7.01
SAP JAVA TECHNOLOGY S OFFLINE 7.01 0006 SP006 SAP JAVA TECHNOLOGY S OFFLINE SAP TECH S OFFLINE 7.01
SAP JAVA TECHNOLOGY SERVICES 7.01 0006 SP006 SAP JAVA TECHNOLOGY SERVICES (Schicht 3 Dummy) SAP JAVA TECH SERVICES
SAP MI CLIENT 7.01 0006 SP006 SAP Mobile Infrastructure Client 7.0
SAP MSS 600 0017 SP017 SAP MSS 600 (Manager Self Services)
SAP PCUI_GP 603 0006 SP006 SAP PCUI_GP 603
SAP SOFTW. DELIV. MANAGER 7.01 0000 SAP JAVA SL 7.01
SOFTWARE LIFECYCLE MANAGEMENT 7.01 0006 SP006 SOFTWARE LIFECYCLE MANAGER 7.01
UME ADMINISTRATION 7.01 0006 SP006 UME ADMINISTRATION 7.01
UWL COLL PROCESS ENGINE 7.01 0006 SP006 UWL COLL PROCESS ENGINE 7.01
VISUAL COMPOSER BASE 7.01 0006 SP006 VISUAL COMPOSER BASE 7.00
VISUAL COMPOSER BI KITS 7.01 0006 SP006 VISUAL COMPOSER BI KITS 7.00
VISUAL COMPOSER FLEX 7.01 0006 SP006 VISUAL COMPOSER FLEX 7.00
VISUAL COMPOSER FRAMEWORK 7.01 0006 SP006 VISUAL COMPOSER FRAMEWORK 7.00
VISUAL COMPOSER GP KITS 7.01 0006 SP006 VISUAL COMPOSER GP KITS 7.00
VISUAL COMPOSER XX KITS 7.01 0006 SP006 VISUAL COMPOSER XX KITS 7.00
WEB DYNPRO EXTENSIONS 7.01 0006 SP006 WEB DYNPRO EXTENSIONS 7.01
I expect to see more than the 6 previously mentioned files available for download, also the option for EHP2 which I know is available, or am I wrong in expecting this.

Solution manager "Maintenance Optimizer" System Logical Component

Hello friends!
I have some troubles with my Solution Manager!
After SPS17 installation I don't see any system in SOLUTION_MANAGER transaction.
Steps for reconstructions:
1) start tcode SOLUTION_MANAGER
2) select my solution from list (the same like in tcode dswp)
3) goto Change Management --> Support Package Stacks --> Maintenance Optimizer
4) chose product version SAP ERP 6.0 (it is assigned to my solution)
5) in appears grid I don't see system (see below)
I----II--
I
I_V_I_System_I_Logical Component_I
Before installation I can select my solution. Now it's not critical because I can confirm downloads...

Hi Luke!
I didn't solve this problem...
But I've only one system in my solution, and, as I understand, it may not be showed. But I may be wrong...

Missing System under Product Version at Maintenance Optimizer

Hello Colleagues,
We currently using SAP Solution Manager 4.0 SP11 for our SAP landscape.
For upgrade our new PI 7.1 system with EHP1 we need to download respective files at SAP Solution Manager with the Maintenance Optimizer.
Under Product Version (pull down menu) at Maintenance Optimizer (TC DSWP) I am only able to select the Solution manager itself. Not the already configured PI system under System Landscape (TC SMSY).
Any idea why I am not able to select the PI system?
Many thanks in advance!
Regards,
Jochen

Hello Jochen
1. Are your Solution Manger system and P1 system in same Solution(system landscape) ?
2. Or each of the above two systems has different solution ?
If yes in the first case, then this might be filter problem in initial screen of MOPz. On the right corner you can see filter options. click on it and check if are able to select all of your systems under this Solution in which you are running MOPz tcode.
If 02nd option is true, then you should run MOpz tcode in the correct solution, in which the system P1 is maintained.

No System Found in Maintenance Optimizer

Hi,
I have installed solution manager (ST 400 SP09) and did apply the relevant notes to setup the Maintenance Optimizer.
I could able to see the Maintenance Optimizer button in Support Package and Stack Inbox.
(Transaction SOLUTION_MANAGER> select the Solution->operation ->Change Management ->Support package Stack)
But I found following message No Systems Found along with the following message
Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).
How do I proceed further? I wanted to see the Systems defined under SMSY transaction to be displayed here.
Can any body help me by providing the exact steps define the systems in Maintenance Optimizer and how to sync the components defined under SMSY with MOZ?
Regards
Arati

Hi Amit
This doesn't resolved my issue.I am getting following message
No entries exist, double-click for long text
Message no. SV065
Diagnosis
No entries were found when importing data from the database.
Procedure
To create new entries, choose the function Edit -> New Entries.
To recover deleted data, you must first display it with the function
Select -> Display Deleted, and then discard changes with Ctrl. + F2 or
the "Discard Change" button.
Thanks
Arati

Maintenance Optimizer - Under Change Management in solman_workcenter

Similar Messages

Maybe you are looking for