Maintenance Optimizer

Dear all,
When starting "Create New Maintenance Transaction" in Maintenance Optimizer, an information message prompted:"Status profile SLMO0001 does not exist. Please checl." and the following messages are shown after:
Warning Customizing not available in logon language EN, use language EN
Error Status profile SLMO0001 does not exist. Please check
Error Status profile SLMO0001 does not exist. Please check
Warning Status values of procedure type SLMO not read
I tried to implement note#1090202, all succeeded except step 2(a).  When adding in SOCM_ACTION_003 I have an error message:
Entry SLMO0001   does not exist in TJ20 (check entry)
Solution Manager Package Level:
ST     400     0013     SAPKITL423     SAP Solution Manager Tool     Component Supp. Pkg.
Would anyone can help?
Many thanks!
Daniel

Hi,
i had the same problem and i solved it with note 1090202 this problem is caused because of a missing customizing setting.
I dont know how the creater of this thread could be so egoistically and mark this thread as answerded without posting the solution. I think this is a insolence.
( He mentioned the same not as i do, but he didn´t wrote that this was the final solution)
I hope i can help somebody with posting my solution!
BR
Stefan

Similar Messages

  • How to delete the redundant sessions in Maintenance Optimizer?

    Hi experts,
    As it said in title, how to delete the expired sessions as the screenshot below in Maintenance Optimizer and keep SAP Solution Manager clean?
    Thank you in advance.
    Best Regards,
    Pany

    Hello,
    Check here Deleting existing maintenance optimizer transactions
    Please  refer to the note 845433 , with the report CRM_ORDER_DELETE  and transaction type SLMO,you can delete those maintenance optimizer, hope this help to you
    BR,
    K.

  • Maintenance Optimizer "local logical system is not defined"

    hello, i would like to create a new maintenance transaction to upgrade from SAP ERP 6.0 to SAP ERP 6.0 Enhanced Package 4 i follow the steps in the "maintenance optimizer configuration guide" BUT when i click to create a new maintenance transaction i faced an error told me "local logical system is not defined"!!! so how i can define Local logical system?
    thanks in advance
    Amr M. Abdelazeez
    Mobile: 002 011 40 85 200
    Linked In: http://eg.linkedin.com/in/amrabdelazeez/
    Alexandria, Egypt

    This should be configuration issue, please check the description in the Implementation Guide (tr: SPRO) at following point:
    SAP Solution Manager
    - Basic Settings
       SAP Solution Manager System
        General Settings
         Maintain Logical Systems
    After having maintained the logical systems, the error should not be displayed any longer.

  • Local logical system is not defined-Maintenance Optimizer Config

    Hi,
    When I try to configure Maintenance Optimizer in SAP Solution Manager 7, it gives me an error saying "Local logical system is not defined"
    But I have created a Logical client using SCC4.
    And the other thing is for this created client, does not have any users on this client, If I run,
    SQL> select bname, UFKLAG from sapsr3.usr02 where mandt='400';
    Answer is "no rows selected"
    So I cannot even login in to my new client as well. I tried with SAP/PASS no use. I tried to re-set sap by deleteing it nothing helped.
    my login/no_automatic_user_sapstar parameter also have 0 (But this is in Red, I dont know why its like that)
    Please help me to rectify both these issues. Issue with Maintenance Optimizer and loggin in to the new client.
    Thank you!

    First of all, 'Logical System' and 'Logical Client' are two different things.
    For Client Problem:
    You did create a client in SCC4.
    1. did you create a logical system via BD54 and then did you assign that logical system to this newly created client ?
    2. did you perform a local client copy to put data into this new client from an old or from a standard client like 000 ?
    If you didn't perform above two things, then please do. Only then, you will be able to see some data in this client and will be able to to select statements, And, obviously the SAP*/PASS login (login/no_automatic_user_sapstar should be 0 after reactivation of profile and restart of the instance)
    For MOpz issue:
    Could you please search in sap marketplace for any particular note specific to MOpz ?

  • Solution manager maintenance optimizer

    Hi all,
    I have what I think is an issue, and hoping someone could possibly point me in the direction to correct. I have setup our solution manager system and trying to get the maintenance optimizer option working fully. I have a java system that I pull the information from SLD perfectly fine, and it lists all installed software components via SMSY>SYSTEMS perfectly. I have assigned logical components etc. I can create a new maintenance optimizer transaction, select the proper system with assigned components, but when it lists the files to be downloaded automatically I expect to see alot more files available for download than it lists for me. I assume I am missing something, but not sure where to look.
    Would anyone be able to possibly point me in the right direction on what I might be missing?
    Regards,
    Chris

    Hi Markus,
    The system is SAP EHP1 for SAP Netweaver 7.0. It has the following components installed and specified in logical components:
    Adobe Document services
    Application server Java
    EP Core
    Enterprise Portal
    Along with the kernel files I also get the following files available for download via maintenance optimizer (6 in total)
    FORUMS06_0-10005892.SCA SP06 for FORUMS 7.01
    BP_PROJ_PORT_DESIGNCOLL
    BPPPMDC17_0-10003174.SCA BP PROJ., PORT. & DCOL. 4.0 SP17
    BP ERP05 PROJ SELF-SERV
    BPERP5PSS17_0-10003284.SCA BP ERP05 PROJ SELF-SERV 1.0 Support Package 17
    BP ERP05 MAINTENANCE TECH
    BPERP5MTC07_0-10004455.SCA SP07 for BP ERP05 MAINTENANCE TECH 1.2
    BP ERP SITE TECHNICIAN
    BPIS7TST07_0-10004458.SCA SP07 for BP ERP SITE TECHNICIAN 1.20
    BP ERP ICM ANALYST
    BPIS7ICMAL06_0-10006119.SCA SP06 for BP ERP ICM ANALYST 1.41
    When I look at installed system components via SMSY it correctly shows everything installed which includes:
    ADOBE DOCUMENT SERVICES 7.01 0006 SP006 ADOBE DOCUMENT SERVICES 7.00
    BI BASE SERVICES 7.01 0006 SP006 BI BASE SERVICES 7.01
    BI INFORM. BROADCASTING 7.01 0006 SP006 BI INFORM. BROADCASTING 7.00
    BI META MODEL REPOSITORY 7.01 0006 SP006 BI META MODEL REPOSITORY 7.01
    BI REPORTING AND PLANNING 7.01 0006 SP006 BI REPORTING AND PLANNING 7.01
    BI UNIVERSAL DATA INTEGRATION 7.01 0006 SP006 BI UNIVERSAL DATA INTEGRATION BI UDI 7.01
    BI WEB APPLICATIONS 7.01 0006 SP006 BI WEB APPLICATIONS 7.00
    BI WEBDYNPRO ALV 7.01 0006 SP006 BI WEBDYNPRO ALV 7.01
    BP ERP FIN MDM 1.40 0006 SP006 BP for Financial MDM 1.40
    BP ERP HR EIC 1.40 0006 SP006 BP für HR Employee Interaction Center 1.40
    BP ERP ICM ANALYST 1.41 0004 SP004 BP for ICM-Analyst 1.41
    BP ERP RECRUITER 1.40 0006 SP006 BP for Recruiter 1.40
    BP ERP RECRUITING ADMIN 1.40 0006 SP006 BP for E-Recruiting Administrator 1.40
    BP ERP SITE TECHNICIAN 1.20 0006 SP006 BP for Site Technician (Telecommunications) 1.20
    BP ERP UT XSS 1.40 0006 SP006 BP ERP UT Definition für Self Service BP 1.40
    BP ERP05 BUS UNIT ANALYST 20 1.0 0017 SP017 BP for Business Unit Analyst (mySAP ERP) 1.0
    BP ERP05 COMMON PARTS 1.41 0006 SP006 BP ERP05 COMMON PARTS 1.41
    BP ERP05 ESS 1.41 0006 SP006 BP for Employee Self-Service 1.41
    BP ERP05 HR ADMINISTRATOR 1.41 0006 SP006 BP for HR Administrator (mySAP ERP) 1.41
    BP ERP05 MAINTENANCE TECH 1.2 0006 SP006 BP for Maintenance Technician 1.2
    BP ERP05 MSS 1.41 0006 SP006 BP for Manager Self-Service 1.41
    BP ERP05 PROJ SELF-SERV 1.0 0016 SP016 BP for Project Self-Service (mySAP ERP) 1.0
    BP ERP05 SELF-SERV ADMIN 1.0 0017 SP017 BP for Self-Service Administrator (my SAP ERP) 1.0
    BP ERP05 TALENT DEV 1.01 0010 SP010 BP for Talent Development Specialist 1.01
    BP_PROJ_PORT_DESIGNCOLL 4.0 0015 SP015 BP for Project Portfolio Management and Design Collaboration 4.0
    CAF EU 7.01 0006 SP006 SAP Net Weaver End User 7.01
    DI BUILD TOOL 7.01 0000  SAP BUILD TOOL 7.01
    DI CHANGE MANAGEMENT SERVER 7.01 0006 SP006 CHANGE MANAGEMENT SERVER and SXMAN 7.00 701
    DI COMPONENT BUILD SERVER 7.01 0006 SP006 COMPONENT BUILD SERVER 7.01
    DI DESIGN TIME REPOSITORY 7.01 0006 SP006 DESIGN TIME REPOSITORY 7.01
    FORUMS 7.01 0005 SP005 FORUMS 7.01
    J2EE ENGINE BASE TABLES 7.01 0006 SP006 BASETABLES
    J2EE ENGINE CORE TOOLS 7.01 0006 SP006 CORE TOOLS J2EE ENGINE
    JAVA LOG VIEWER 7.01 0006 SP006 SAP JAVA LOG VIEWER 7.01
    JAVA SP MANAGER 7.01 0006 SP006 JAVA SP MANAGER 7.00
    KMC BASE COMPONENTS 7.01 0006 SP006 KMC BASE COMPONENTS 7.01
    KMC COLLABORATION 7.01 0006 SP006 KMC COLLABORATION 7.01
    KMC CONTENT MANAGEMENT 7.01 0006 SP006 KMC CONTENT MANAGEMENT 7.01
    KMC UI LAYER 7.01 0006 SP006 KMC UI LAYER 7.01
    KMC WEB PAGE COMPOSER 7.01 0006 SP006 KMC WEB PAGE COMPOSER 7.01
    LIFECYCLE MGMT PORTAL 7.01 0006 SP006 LIFECYCLE MGMT PORTAL 7.01
    LIFECYCLE MGMT TOOLS 7.01 0006 SP006 LIFECYCLE MGMT TOOLS 7.01
    MI ADMINISTRATION 7.01 0006 SP006 MI ADMINISTRATION 7.01
    MI DRIVERS 7.01 0006 SP006 MI DRIVERS 7.00
    MI WD LAPTOP 7.01 0006 SP006 Net Weaver Mobile Infrastructure Web Dynpro LAPTOP 7.00
    PDK PORTAL SERVICES 7.01 0006 SP006 PDK PORTAL SERVICES 7.00
    PORTAL CORE SERVICES 7.01 0006 SP006 EPBC 7.01
    PORTAL FRAMEWORK 7.01 0006 SP006 EPBC2 7.01
    PORTAL PLATFORM 7.01 0006 SP006 EP - Portal Server PORTAL 7.01
    PORTAL WEB DYNPRO 7.01 0006 SP006 PORTAL WEB DYNPRO 7.01
    RTC 7.01 0006 SP006 RTC 7.00
    RTC-STREAM 7.01 0006 SP006 RTC-STREAM 7.00
    SAP CAF 7.01 0006 SP006 SAP CAF 7.01
    SAP CAF-KM 7.01 0006 SP006 SAP CAF-KM 7.01
    SAP CAF-UM 7.01 0006 SP006 SAP CAF-UM 7.01
    SAP CPS BASIC (SCHEDULER) 7.01 0004 SP004 Job scheduling capabilities of SAP NetWeaver 7.01
    SAP ESS 603 0006 SP006 SAP ESS 603
    SAP INTERNET KNOWLEDGE SERVLET 7.01 0006 SP006 SAP Internet Knowledge Servlet 7.00 (SAP J2EE IKS)
    SAP J2EE ENGINE 7.01 0006 SP006 SAP J2EE Engine 7.01
    SAP J2EE ENGINE CORE 7.01 0006 SP006 SAP J2EE ENGINE CORE 7.01
    SAP JAVA TECHNOLOGY S OFFLINE 7.01 0006 SP006 SAP JAVA TECHNOLOGY S OFFLINE SAP TECH S OFFLINE 7.01
    SAP JAVA TECHNOLOGY SERVICES 7.01 0006 SP006 SAP JAVA TECHNOLOGY SERVICES (Schicht 3 Dummy) SAP JAVA TECH SERVICES 
    SAP MI CLIENT 7.01 0006 SP006 SAP Mobile Infrastructure Client 7.0
    SAP MSS 600 0017 SP017 SAP MSS 600 (Manager Self Services)
    SAP PCUI_GP 603 0006 SP006 SAP PCUI_GP 603
    SAP SOFTW. DELIV. MANAGER 7.01 0000  SAP JAVA SL 7.01
    SOFTWARE LIFECYCLE MANAGEMENT 7.01 0006 SP006 SOFTWARE LIFECYCLE MANAGER 7.01
    UME ADMINISTRATION 7.01 0006 SP006 UME ADMINISTRATION 7.01
    UWL COLL PROCESS ENGINE 7.01 0006 SP006 UWL COLL PROCESS ENGINE 7.01
    VISUAL COMPOSER BASE 7.01 0006 SP006 VISUAL COMPOSER BASE 7.00
    VISUAL COMPOSER BI KITS 7.01 0006 SP006 VISUAL COMPOSER BI KITS 7.00
    VISUAL COMPOSER FLEX 7.01 0006 SP006 VISUAL COMPOSER FLEX 7.00
    VISUAL COMPOSER FRAMEWORK 7.01 0006 SP006 VISUAL COMPOSER FRAMEWORK 7.00
    VISUAL COMPOSER GP KITS 7.01 0006 SP006 VISUAL COMPOSER GP KITS 7.00
    VISUAL COMPOSER XX KITS 7.01 0006 SP006 VISUAL COMPOSER XX KITS 7.00
    WEB DYNPRO EXTENSIONS 7.01 0006 SP006 WEB DYNPRO EXTENSIONS 7.01
    I expect to see more than the 6 previously mentioned files available for download, also the option for EHP2 which I know is available, or am I wrong in expecting this.

  • Problem with Maintenance Optimizer...

    Hello gurus,
    I had a problem which I didn´t reached a solution...
    When I create a new maintenance optimizer transaction and choose, on first step "Plan Maintenance", a type of Product Version I don´t have all systems which I configure on this Product Version on SMSY (System Landscape Directory).
    For instance: I configure in SMSY the Product version (group) SAP ECC 6.0 which contains three systems DEV ; QAS ; PRD.
    When I open/create a new maintenance optimizer transaction and choose the SAP ECC 6.0 I only see one system, the DEV system, within his, and I want to see all three systems which I configure in SMSY!
    Help me please...! TKS
    Best regards,
    Joao Dimas

    Hi Vijay,
    When I press in that URL - http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000679533& - does not appear anything about maintenance optimizer guide... it show me a notify "This folder needs to be reviewed" and I can´t see anything like you describe... I´m newest in SAP and still I have difficulties on search sometimes some things...
    The link above, have you sure that's correct?
    What´s the exactly name of document that you refer??
    Thanks in advance,
    Best regards,
    Joao Dimas

  • Error when Launching the Maintenance optimizer

    Hello,
    When launching the Maintenance optimizer of solman 7.1, in the step Cionfirm Target i got the following dump:
    The followin error text was processed in SD1 the systm: Value loss during allocation.
    The error occurred on the application server SD1ODYLSV1_SD1_00 and in the work process. 9
    The termination type was: RABAX_STATE
    The ABAP call hierarchy was:
    Method: GET_2ND_CHECK_RESULT of program CL_MO_SMP_ADAPTER=============CP
    Method: LOAD_IMPACT_ASC of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
    Method: IF_COMPONENTCONTROLLER~LOAD_IMPACT_ASC of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
    Method: ONACTIONLOAD_IMPACT of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
    Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
    Method: DO_HANDLE_ACTION_EVENTS of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
    In the trace file of the Work process teh following error was found:
    A  ABAP Program CL_MO_SMP_ADAPTER=============CP        .
    A  Source CL_MO_SMP_ADAPTER=============CM00A      Line 19.
    A  Error Code CONVT_DATA_LOSS.
    A  Module  $Id: //bas/720_REL/src/krn/runt/abxacnv.c#4 $ SAP.
    A  Function ab_xaCloseSimpleR Line 725.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  exceeded soft limit for RUDILOCKS (user: SAPADMIN    , ta:                     )
    I tried to find something about the *RUDILOCKS * without success.
    Do you have any suggestion to resolve the issue?

    Hi,
    Check SAP note 1505832.
    Thanks
    Sunny

  • No System Found in Maintenance Optimizer

    Hi,
    I have installed solution manager (ST 400 SP09) and did apply the relevant notes to setup the Maintenance Optimizer.
    I could able to see the “Maintenance Optimizer” button in Support Package and Stack Inbox.
    (Transaction SOLUTION_MANAGER> select the Solution->operation ->Change Management ->Support package Stack)
    But I found following message “No Systems Found” along with the following message
    Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
    Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
    Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).
    How do I proceed further? I wanted to see the Systems defined under SMSY transaction to be displayed here.
    Can any body help me by providing the exact steps define the systems in Maintenance Optimizer and how to sync the components defined under SMSY with MOZ?
    Regards
    Arati

    Hi Amit
    This doesn't resolved my issue.I am getting following message
    No entries exist, double-click for long text
    Message no. SV065
    Diagnosis
    No entries were found when importing data from the database.
    Procedure
    To create new entries, choose the function Edit -> New Entries.
    To recover deleted data, you must first display it with the function
    Select -> Display Deleted, and then discard changes with Ctrl. + F2 or
    the "Discard Change" button.
    Thanks
    Arati

  • What is best practice for using Maintenance Optimizer to download SPS + EhP

    SAP indicates in note 1095233 and many other documents that the best practice is to implement an EhP along with an SP Stack in the same queue. Furthermore, the only way to download the components of an EhP is via Maintenance Optimizer. However, in step 2 (Calculate download files automatically) you must choose either Maintenance (SPS) or Enhancement Package Installation (EhP); there is no way to tell Maintenance Optimizer that you want to download both SPS and EhP.
    In developing the process for my team I circumvented the problem by saying to select Maintenance first to get the SPS into the Download Basket and follow that with selecting Enhancement Package Installation to get the EhP into the Download Basket. The plan would be to include all the downloads in the SPAM/SAINT queue with the expectation that SPAM/SAINT will be able to determine what must be included.
    I'm wondering now whether that is a legitimate way to approach this and I am hoping others will share their process.
    Thanks,
    Terry McCann
    Monsanto Company
    St. Louis, MO

    Actually, I don't believe you will get the entire SP Stack for ERP 6, you only get those pieces of the stack that are required for the Technical Usages you select for the EhP.  I'm basing that on my observation that you get a different subset of the files making up the stack depending upon your TU selection. Also, note 1095233 specifically states:
    If now the corrections included in the enhancement package 3 correspond to ERP 6.0 SP level 11, SAP  recommends to update also the parts of your system to SP level 11 which you do not want to update to enhancement package 3  to achieve a consistent correction level in all parts of your application: SAP recommends to update all software components to the correction status corresponding to SAP ERP 6.0 Support Package Stack 11 with the installation of SAP enhancement package 3 for SAP ERP 6.0.
    Thanks,
    Terry

  • Solman 7.0 - Question regarding "New Maintenance Optimizer Transaction"

    Hi All,
    Since I'm quite new on Solman transactions, while monitoring my queue, I found 4 tickets that says "New Maintenance Optimizer Transaction".
    This is what's inside:
    "Internal Note             SOLMAN_ADMIN 08.04.2014 08:41:25
    The status was set to the value 'Selection'"
    Can someone help me on where to find information regarding this, or if this is something I should take a look at?
    Thanks!

    Hi Bua,
    Somebody has created an new maintenance transaction from MOPZ of solman, which is used for generated XML for applying support packs and EHPs.
    Selection mean, that the user was selecting the components but has now done anything or updated the status
    Divyanshu

  • Maintenance Optimizer - Systems and Logical Components are not displayed

    Hi Experts,
    When I use the Maintenance Optimizer and select a product version, I do not get any Systems and the relevant Logical Component so that I can select one of those that are displayed. Did I miss any configuration settings or is there anything else that I need to do. Please give me the checklist that I need to look into before selecting a product version in the maintenance optimizer. Please help me out of this.
    Thanks in advance,
    Sagar.K

    Hi,
    Check this link... it has complete step by step configuration of Maintenance Optimizer...
    https://websmp105.sap-ag.de/~sapidb/011000358700000235502007E
    https://websmp208.sap-ag.de/solman-mopz --> SAP Tutor on Maintenance Optimizer
    Award points if found useful

  • Error in maintenance optimizer generating Stack File XML

    Hi all,
    In step 3 "Download Files" of maintenance optimizer transaction to implement the EHP5 of ERP, In the tab "Log" I see the following error.
    *Collecting XML adjustment input data done with error or warning.
    Message no.AGS_MOPZ_PLAN_MSG144*
    The stack XML file is very very important to the ehpi installer, then I need to know which implications have the error below...
    I create 3 Maintenance Optimizer transactions, and in all of them, the error appears.
    Thanks  a lot.

    Hello,
    Please check if the SPAM level of the Solution Manager is the latest.
    If this does not help, please check the details about the error message in transaction SLG1 (this transaction is the full application log). There should be extra text / error message explaining the situation, you only have to look for the error around the time when you got the 'Collecting XML adjustment input data done with error or warning' message.
    Best regards,
    Miguel Ariñ

  • How to configuration Maintenance Optimizer in Solution Manager 4.0?

    Hi All,
    Can any tell me How to configuration Maintenance Optimizer in Solution Manager 4.0?
    If any one having the document for same then please give me.
    My mail id is : - <email address removed by moderator>
    Thanks a lot,
    Harshal

    Hello Harshal,
    Please go to service.sap.com/solutionmanager, click on the "maintenance optimizer" link, then a step-by-step guide is available there.
    Another document is attached in Note 990534.
    If you have further issues, Note 1024932 might be a good starting point.
    Best regards,
    Victor

  • Maintenance Optimizer in Solution Manager 3.2

    We are experiencing the sheer joy that Solution Manager is, while trying to configure the Maintenance Optimizer.
    From the document MOPZ_Component32_vers4.pdf document that is for SP15 for SolMan 3.2, we are confused by this section on Page 6.
    "Your system administrator must have performed the following Customizing activities:
    &#56256;&#56440; Maintain User for Communication with SAP Service and Support
    &#56256;&#56440; Assign S-User for SAP Support Portal functionality or with the transaction AISUSER
    Your S-User must be assigned to the same customer or corporate number as
    the S-User which your administrator entered in the SAP-OSS RFC destination."
    We just don't understand the last sentence.  You enter an S-User in the SAP-OSS RFC destination in sm59??  Where??
    Currently in AISUER I have an entry, with my SAP User ID (eg. FRED) and my S-User ID in the 'Contact Person' column (e.g. 123456, my S000123456, shortened).
    We can access the Maintenance Optimizer, but packages are not visible there.  No error is reported.  I have the necessary Roles.  Are these the correct values?
    Our SAPOSS Rfc is functioning, as user OSS_RFC. What the document is trying to say about the relationship between this RFC and a service marketplace S-User is unclear.
    Any assistance appreciated.  Remember, SM 3.2!

    Hi,
    You can download this to desktop or you  can transfer same to server(/usr/sap/trans/EPS/in/)
    You have to uncar using SAPCAR.
    Also you can directly upload from front-end using spam/saint as well.
    Then apply the same using spam/saint.
    Let us know if you need any clarification.
    Regards

  • Configuring Maintenance Optimizer issue

    Hi All,
    This is the first time I am configuring SM 4.0. I am done with installation, and want to conigure maintenance optimizer.
    I followed the IMG guide step by step.
    But after all done, there are no systems listed under the maintenance optimizer of my Solution Landscape.
    Instead I get a message:
    <b>Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
    Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
    Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).</b>
    Meanwhile I have issue with my J2EE engine not starting due to some UME issues, which I am working on parallely.
    Please do let me know what would be the issue.
    I have followed the note 990534 and doen with the BC sets.
    But I am not sure where am I making a mistake.
    One more doubt is, does maintenance optimizer connect to the SAP service market place through SAPOSS??? and am I not seeing anu system because my SLD is down. Please bear with my ignorance, I am a little lost here.
    I have completed the solution landscape, logical component, etc.
    Please help...
    Regards,
    Sapfan

    Hi JP,
    My current SP levels are:
    SAP_BASIS - 0011
    SAP_ABAP - 0011
    PI_BASIS 2005_11 - 0011
    ST-PI 2005_11 - 0003
    SAP_BW - 0011
    SAP_AP - 0007
    BBPCRM 5 - 0007
    CPRXRPM - 0007
    ST400 - 0010
    ST-ICO - 0008
    ST-SER - 0007
    The issue is I did not connect to SAP yet, as I have only one RFC generated i.e. SAPOSS> Since my SAPRouter is not yet configured, I will connect to a valid  SAPRouter once all the SM config is done.
    I als got sone error in generating RFC for the main system when I used the wizard. I selected Change management and customizing directory and also selected Assign RFC for system monitoring.
    I changed back the UME source to client 001, but still same.
    Moreover the maintenance optimizer is not showing the satellite system.
    I am really stuck.
    Please let me know if you require more information.
    I created the main system and defined the solution, as per the SPRO->Solution Manager -> Advanced Configuration -> Basic settings ->
    I started this only after applying SP10.
    Now I don see the systems both for Setup Solution monitoring and in maintenance optimizer.
    WIll the system not reflect is the java ebngine is down???
    Regards,
    P.K

  • SOL MAN - Maintenance Optimizer

    Hi all
    I configured Maintenance Optimizer in Solution Manager 4.0 but when launching:
    dswp -> change management -> support package stack - > maintenance optimizer
    select product versrion
    select system
    -> continue
    only procedure 8000000x saved displayed on status bar. No further screen is displayed.
    I read note 1032322 and attached file Setup_Maintenance_Optimizer.zip
    RFC connection is working well.
    Is anything missing in customizing?
    Thanks
    R

    Hi raffaele,
    I'm getting problems with setting RFC connection. Can i get your help ?
    topic: Maintance optimizer - connection settings
    mail: [email protected]
    Thanks in advance,
    Dimitry Haritonov

Maybe you are looking for