Maintenance order plan cost

Dear frnds,
       I am facing problem to get plane activity cost of a maintenance order. i am taken a formula SAPC20 in work center & made duration is a activity under standard value & assign it in activity type labor which already have value in KP26.
But when i create order it give me log at atime of cost determination
"Missing formula in work center TESTMAIN"
massage no     E   CK      430
it is may be due to formula missing or standard value missing.
If i used same work center in routing & made production order then there is no error, i also not get any option to put standard value in maintenance order or maintenance task list as i get in prod order & routing.
Plz help me to resolve it.
Thanks & Regards
Rakesh saxena

Dear,
In that case you need to create the new special sprocument key with activity type as power, labour. Best way copy from standard one. Then define the parameter and define the formule by using activity type and formula parameter.
For details please refer this link,
[Work Center Formula  |http://www.sap-img.com/production/set-parameter-and-work-center-formula.htm]
Hope it will solve your problem.
Regards,
R.Brahmankar

Similar Messages

  • Plant Maintenance Order planning costs transfer to Cost Centers.

    Hello,
    1.  Capacity Planning
    I'm trying to get planning information from a PM order back to a cost center.
    I have planned operations in a PM order with a valid activity type and the work center is linked to the Cost Center.
    But I cannot see any information in KSBL, Cost Center planning report.
    I have tried KSPP - Transfer to Cost Center and KSOP - Transfer to Activity based costing.
    Both come up empty.
    What am I missing?
    2.  Costing.
    I would like the planned costs in the PM order to settle to the cost center plan.  But the PM orders are not configured for planned settlement (I believe that's an SAP setting). 
    How do I get the planned costs into a cost center's plan?
    Thank you very much for your help,
    Dan.

    Thanks, but I'm trying to integrate the planning that happens in a PM order with the cost center.  I was able to get planned costs from the orders via S_ALR_87012993.
    the lack of planned settlement in a PM order is annoying.  We do a lot of work on PM orders and settle actual costs to cost centers.  It would be nice to use that same functionality (Operations, Components, task lists) to be able to plan costs and settle the planned costs to cost centers.  Internal Orders can settle planned costs to cost centers, why not PM orders?
    I believe the KSPP transaction helps to link the two objects somehow, but I can't get it to work.  If anybody has any insights, that would be great.
    Or should I be pursuing something else?
    Thanks.
    Dan.

  • Order plan cost not appearing in PS report.

    Dear PS friends,
    I have an issue in order plan cost updation ( budget report ).
    Used the prescribed WBS in maintenance order ( additional data ), but its not appearing in planned cost of CJ31 screen.
    Checked the following
    a)  WBS is account assignment element.
    b) Network type order appended indicator in OPSV.
    c) Setting in network type parameters for " determine plan  
        cost".
    d) WBS and order - both are showing plan cost when booked separately, but not integrated.
    Can anybody help me to resolve this ! 
    Thanks in advance
    --  Sri  --
    Edited by: Srinivasan Madaswamy on May 18, 2008 2:15 PM

    Hi,
    In case of the maintenance order (Order Category:30)
    Please check the follwoing in Tcode OPSV:
    1. type is maintained default i.e ++++ (this will consider all the order types mantioned for maintenance order.
    2. Please selelct the appropriate controlling area.
    3. Appended plan indicator has to be checked mark,
    4. Assigned funds in the plan indicator has to be checked mark,
    5. In Tcode IW32: In the additional data Tab assign the WBS Element. Save the maintenance order.
    Hope its useful.
    Reward point if useful. Revert abck if any other issue.
    Thanks..

  • CN41N and S_ALR_87013533 report not showing Production order planned cost

    Hi Experts,
    I am having issue to get total planned production order values in my CN41N or S_ALR_87013533 cost report. I am facing 2 issues :
    1. CN41N repoet does not show individual material cost planned in BOM.
    2. CN41N report and S_ALR87013533 report does not show total value but only picking fixed value.
    Example :
    1. CN41N report :
    Above screenshot shows no values in Project plan cost & Order cost column but it shows total cost as a lumpsum on top for project. I need to know how can i get material cost populated here for Project Valuated stock material?
    2. S_ALR_87013533
    This report shows Total Cost of BOM as 1 line under Material Procurement activity similar to CN41N report. Also Order value is picking from Fixed cost from planned order and total cost is added on top. How can i get Total cost picked from production order?
    Is there any Setting in PS config which allow me to pick the detail production order plan cost in both report under planned cost.
    Thanks in advance.
    Ashish

    Hi Ashish,
    I doubt whether Item level reporting  in S_ALR... (hierarchy report) is possible or not because I haven't seen item level cost in them only the lump-sum cost because they are summarized at cost object level itself. Navigation path are there which we use to go into details of cost.
    Please check the following links:
    https://scn.sap.com/thread/1743833
    (In the above thread,focus on  Mr. Mohamed Rafi comment.)
    http://scn.sap.com/thread/3530080
    http://scn.sap.com/thread/1311820
    Order cost plan in report CN41N
    Display of plan cost., CN41N | ABAP, SAP, benX AG, benXBrain,&…
    Just an additional pointer ,have a look on your costing variant and variation variant settings for material section.
    Regards
    Saurabh

  • Service Order Planned Costs and Cost Center Planned Line Items

    Experts,
    I am curious of Service Order Planned costs, and whether or not these planned costs are being posted to the Cost Center linked to the Service Order Operation's work center.
    I am a but puzzled as I don't see any planned costs from any Service Order Operation in a cost center linked to the Operations work center, when reviewing "Cost Centers: Plan Line Items" report.
    BR,
    Cenk

    The planned costs were input in one of the Service Order operations as planned hours. There is a column for it in the operations list. The amount of hours have incurred a planned cost on the Service Order header.
    I simply assumed that this cost would be credited to the Cost Center linked to the operation's Work Center. But that is obviously not the case. I am not familiar with the PLICC field and the functionality it provides.
    Thanks!

  • Material cost in production order plan cost

    Dear all,
    -we are in sales order cost object with non-valuated stock...
    -we have created two production orders from MRP run. First one is for semi finished material and second one is for finished material.
    Issue-1
    Both production orders not showing material cost in production order plan cost...
    Issue-2
    When i consumed raw material against semi-finished material production order (261-E), system not gnerated any document and material cost not updated either in production order or sales order...
    where should i do changes in configuration to get updated material cost in the production order...
    Best regards
    Kishore

    Hi
    Issue 1 : Check Whether Standard cost is present for header material of prod order, and under control tab of order costing variant for plan is present.
    Issue 2 : Use 261 instead 261E.
    Rajneesh

  • Plant Maintenance Order Act Costs-0PM_OM_OPA_2 or 0CO_OM_OPA_6 datasources?

    To get Actual/plan costs for the value categories in Plant Maintenance workorders, which DataSource  would I use? The 0PM_OM_OPA_2 or 0CO_OM_OPA_6?
    What is the difference? The 0CO_OM_OPA_6 is already pulling data for Internal orders in our system.
    How can I check to see if this is also pulling in Maintenance Order data?
    Since 0CO_OM_OPA_6 is already pulling in data, does it make sense to use this DataSource  instead of activating the 0PM_OM_OPA_2 data source?
    Please advise.
    Thanks.

    Sorry, I should explain my requirement in detail.
    I should not use the LO Cockpit 2LIS_17_13HDR or 2LIS_17_13OPER datasources. But I need to get the WorkOrder Header and Detail data (operation lines with confirmations, AFVC and AFRU tables) along with the actual costs to create a custom BEx query for the work order header/detail and actual costs.
    My initial thought was to enhance 0COORDER_ATTR and get the WorkOrder header data. 0COORDER does not have the Equipment or Functional Location. 0COORDER_ATTR would need to be enhanced to add these.
    For Operation line and confirmations data, write a Generic data source to populate a DSO. Then use the actual costs data coming from the 0CO_OM_OPA_6 datasource.
    After further thought, I am wondering if I can use 0PM_ORDER as is without enhancements and use the 0PM_OM_OPA_2 to get the actual line data. Also, here I have a question. 0PM_OM_OPA_2 is used to populate 0PM_DSO4 DSO along with 3 other datasources, the 2LIS_17_13HDR , 13OPER and 1 datasources. Since I cannot use the LO datasources, can I poulate the DSO with just this one datasource(0PMOM_OPA_2)?
    For operational lines I would still write the generic data source (a view might suffice).
    Experts out there, please let me know if I really off here, with the design.
    Really appreciate any thoughts.
    Thanks.

  • PM Order: Plan cost is Zero where as Actual cost is having value

    Dear Experts,
    I wanted to know why Plan cost is comming zero in the Maintenance order, where as Actual cost is having value.
    Please guide me where it is going wroung
    Regards

    Dear PeteA/Manish,
    I have assigned two components, and agaist which Reservation created since i had mentioned Stock item.
    Then I have issued material against Reservation, then done TECO and processed for Settlement.
    This what i have done, after seeing my settlement i have come to knwo that Plan cost was Zero.
    Thanks for your suggestion.

  • Work orders planned cost report

    Hello
    In our organization, works order can have two types of settlement receivers (cost centers or internal orders). To report planned cost by receivers, we create automatically groups of works orders (by receiver) and uses standard transaction S_ALR_*.
    But it works only if settlement is not modified.
    Does one of you know a better way to report those costs?
    Thanks

    Hi,
    I don't want to report planned costs by maintenance objects but by receivers.
    For exmaple: i have 2 work orders on the same receiver (cost center 1)
    WO1    CC1   11/2011      500u20AC
    WO2    CC1   11/2011      600u20AC
    I try to report planned cost  for CC1
    Regards
    Simon
    Edited by: Simon Maes on Nov 25, 2011 11:31 AM

  • In which table production order planned cost and actual cost i can see?

    Dear PP Guru,s,
    from which table i can see productuion order planned and actaul cost. i checked following tables AUFK, AFVC, AFVV, CAUFV, AFRU, AFKO, AFPO. but i did not found planned cost and actual cost field. is there any other way to get this data with respect production order?
    Regards,
    sree

    Dear,
    Planned and actual costs of prod order from COEP, COSS, COSP  S027 tables
    production order shows the planned cost based on the quantity structure.
    Please refer my reply in this thread for details,
    Re: Actual Halb Material Cost
    Regards,
    R.Brahmankar

  • Production order Planned cost

    Hi gurus,
    may i know how planned cost in production oder is being generated and in table COSS or COSP, what are the criterions that the system will considered before it determines which period will the planned cost be posted to?
    Thanks in advance.
    Regards
    Yiming

    Planned cost for a production/planned order is determined based on the cost of the raw materials and on the activity cost.
    In material master we will define the cost of the material.In BOM we will define how much qty of components/rawmaterial is required for making the header material.Based on thisraw material cost for making an item will be calculated
    In routing we will define how much power,labour etc required for making an item.In KP26 we can maintain cost on a monthly basis.Based on this cost system will calculate the activity cost.
    I think now it is clear

  • MTO Production order planned cost

    Hello
    We have a MTO production order.Need to know plan cost of order.But unable to get in COEP or other csoting tables.Any other table where we can get the data.
    Thaks in advance.

    Hi,
    Check COSP table it is for planned cost.
    Regards,
    Sreekanth

  • The additive cost can not display on the work order plan cost

    dear friends
    first i run the ck74n for the additive cost ,second i run the ck11n for cost estimate ,i can see that the additive cost update to the standard cost successfully ,at last i run the ck24 mark and release the standard cost,but when i raise a work order ,i can  not see the additive cost in the plan cost ,i do not know the reason ,do you have some suggestion
    thanks

    Hi
    This behaviour is expected and standard...
    In Std cost estimate, you have the option of inputting components manually in CK74N... But the actual costs in Prod order will come either from Material issues/Activity Confirmations or manual postings from FI... There is no option to enter additive costs in actuals.. Hence, there is no option of "additive costs" in the Planned costng variant of Prod order
    If you enter any additive costs in CK11N, It is done because you cant estimate it through Qty Structure.. But, during actuals, the actual costs are all available through Material issues/Activity Confirmations.. hence, the additive costs does not apply here
    BR,Ajay M

  • Production order -plan cost

    Dear all
    MY scanerio is MTO . A is a header material and B is a component .both material is having individual indicator 1 in material master.
    sale order----mrp run ---plan order generated.
    when i have converted  plan order to production order ,bom has been copied but costing relevency indicator has not copied in component overview screen in production order . but that indicator is available in bom at component level.(material B)
    but whey i have been  removed individual indicator from material master of material B and assigned 2 (collective indicator) .In that case costing relevancy is copied in production order at component lavel (material B)
    PLzz guide me what  setting is required for copy the costing relevency indicator in component lavel in production order

    Surendra,
    I think your Sales order stock is non-valuated, that is the reason you are not getting cost relevancy Indicator active for the Component. Meaning that when you recieve the component against the sales order, that time itself the cost of the component gets transferred to the Sales order and in Production order you are just Issuing Quantity and it will not have values.
    You can check in the Production Order header - Goods Reciept tab, that the "GR Non- Valuated" check box would be active.
    So if you want the component cost to be transferred to the production order and then the sales order, then you can use "Collective Indicator -2" in the material master of the component. This means you are not purchasing against the sales order, rather consumping from avaialble inventory.
    Regards,
    Prasobh

  • G/L accounts or cost elements for maintenance order

    Hi,
    Can anybody explain the following.
    1- What are the applications of inventory and consumption cost element / GL accounts, while posting goods issuance, good receipt and maintain service entry sheet with reference of maintenance orders' reservations and purchase requisitions? I want to know which cost element or GL account is debit and credit during every posting. And What are their impacts on maintenance order?
    2- What is the purpose of "source" (cost element group) and "settlement cost element assignment" in allocation structure when we want settle maintenance order on cost center?
    3- On which accounting term, the maintenance order should be settled, cost center or GL account? what is the best practices?
    Regards,

    Goods Issue & Goods Receipt:
    In OBYC, G/L account for Inventory posting & Offset account for that Inventory posting will be maintained. Inventory posting will be BSX & Offset will be GBB.
    In Material Master, valuation class will be assigned. Based on this valuation class, this entry will be taken.
    Service Entry Sheet:
    Problem with Service Entry Sheet creation through ML81N
    service entry sheet

Maybe you are looking for