Maintenance schedule for every month /3 months
Hi Guys
I hope you can advice about my requirement.The subject is that client is installing the machine at client location and they are carrying the periodic visits also. The requirement is that after installation of equipment the perdiodic calls should be genearted for everey months for 3 months. After 3rd month , the next periodic calls will go every 3 months.
Here important thing is that, These maintenance plans should be generated automatically once the equipment is installed. The installation date has to fetch by the system automatically based on the sales delevery to the customer.
Do you any idea about the implementing this process.
Hi
Yes it is possible, but we cant do. Since the equipment installation is happening on frequent mode.Also the installation work is doing by the nurse and they will not have SAP access. Always they work with PDA device. We need the maintenenance plan creation automatic mode once they are delevered the equipment to patients. The delevery completed tick mark selection they do.
All rest of things in back ground system has to take care. Should not be any manual work.
Regards
Thenna
Similar Messages
-
How to take list of preventive maintenance jobs for every month- kindly hel
dear friends,
kindly help -how to take the list of preventive maintenance jobs for month basis.
kindly provide me T-CODES.
regards,
g.v.shivakkumarShivakumar,
Use transaction "IW38" to select all PM orders for the month. The selection can be based on specific "order type", Status ", "Equipment"/ "Functional Location" or " "maintenance plan" with period interms of date.
Hope this helps...Reward your points and close the thread.
Regards,
Prasobh -
Dyamic execution of report for every month and data through mail.
Dear Friends,
We are using ECC6.00 With EHP4. My requirement is to send the list of pending notifications with the list details as appearing in transaction QM10. Every month i am supposed to change the from date and to date for example 01.07.2010 to 31.07.2010 for the month July.
How can i make system calculate the from and to date for every month and send mail.
I can schedule the job using SM36 but how to make system calculate the from and to date dynamically for every month. i.e., for august system should calculate date 01.08.2010 to 30.08.2010 automatically as the next month is reached.
Experts help required.
Regards,
M.M1. You need to create a variant.
2. In this blank out the date and give all the required values which will filter for the Pending nofitications like notificaiton type, status, etc.
3. Then click save.
4. When you click save it will give you an option to save as variant.
5. Now in the Variant Attributes screen give the variant name/meanting
6. In the below you will get a "objects for selection screen)
7. In the same you will get the filed name calle d" notification date"/
8. Here Move the curson to the righ side you will find the selection variable, change to D-Dyanamic date calcuation and after that right side you will see one more column for the name of variable(input using only f4)
9. Here press f4,
10. then ypou get a pop up for selection varaible. there first Put "I: for current date and also 'I" for hte Current date +/- ??? days
in this give 30 days.
11. You can also use other function her.e
Now once the variant is created then you have to schedule a job for this program + variant in the sm36 and in the distribution list
you need to mention the email
check and let me know for the feedback
reg
dsk -
In ALV: Subtotals for every month, not for every day, possible?
Hello,
in my Alv-Grid I have a date column, which I want to use to generate subtotals. But I don't want to have a subtotal for every date, but for every month. Is there a method to accomplish this with subtotals? Thanks.
Regards, Lars.Hi Stembergg,
1. Its not possible with only date field.
2. However, if you have one EXTRA FIELD
which contains the Month
only then it is possible.
( You may hide this extra field if u don't
won't to display. But anyhow, u need to
modify your logic and the internal table
and accordingly populate the extra field)
3. There is contraint in alv
that we cannot use any function for any column value
for any claculation/grouping purpose.
Hope it helps.
Regards,
Amit M.
Message was edited by: Amit Mittal -
I've 1.85TB empty space on my Time Machine, but it only retains back-ups to the beginning of the previous month. I should be able to access weekly back-ups for every month before that until the disk is full. Any ideas why it deletes stuff older than a month?
Thanks, Rigby.If you are using Ethernet to connect your Mac to the Time Capsule, are you allowing at least 2-3 minutes for Time Machine to fully load when you open the application to see your backups?
If you are using wireless to connect, you may need to allow 8-10 minutes or longer for everything to fully load, depending on the speed of your wireless connection.
If you see only white time "bars" on the timeline at the right of the screen, you are seeing temporary backups. Permanent backups are displayed with purple "bars". -
Schedule of Risk Analysis for every month end
Hi All,
I'm trying to create monthly background job for Risk Analysis in the GRC CC. I notice that there is no option that I can select to create the job, such that it recognise automatically the last working day for the month. Any idea on this how to and if its possible??
Another option that I can think of is maybe to create the job on the first working day of the new month instead of the last working day.
Anyone encounter such request within yuor organisation or whats the best practise that you are exercising now?
Thanks.
RaymondHi Raymond,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50cd7177-5c22-2a10-8cba-8e0c64bc4ea8
Regards
Gangadhar -
Different maps for every month in FDQM for a single location/Entity
Hi,
Is it possible to have different account maps for each and every month in FDQM for a single entity/location.
The requirement is,client needs to change accounts map each and every month,for eg; if in Jan ,account 1 is mapped to X, in feb same account 1 is mapped to y.
Could any one tell me if this is possible in FDQM,if yes..how can we maintain different account maps for each period for one specific entity.
RegardsThis is possible with the appropriate business process. FDM will apply the current map that exists to the current dataset. It will not retroactively change prior periods unless you specifically reprocess the maps (wither by reimporting data or by selecting Process Logic/Maps) for historical data.
So as a map is updated monthly, the historical data is maintained and the current data uses the "new" map. If for some reason the prior period does need to be reprocessed with the "old" map, you can use the restore function to bring the map back to what it was during that period. -
Generate yearmonth for every month of the year
Hi,
I need to generate all the dates in the format of yyyymm starting with the last month.
I mean something like below :
rownum yearmonth
1 201204
2 201203
3 201202
4 201201
5 201112
...I know we need to make of pseudo column LEVEL, but cant seem to make it work. Please advise.
Thanks
BilluThanks for responding.
marcusrangel -- I need to use the list of dates from the query for every cutoff that we have for comparision.
stew -- your query worked just fine.
Thanks -
Profit & Loss Report for Every month
Hi,
Can anyone tell me is it possible to get the report on Profit & Loss Report to every month for each PROJECT? If possible please let me know the T.Code.
Regards,
Mohan.Hi
try this tcodes
S_ALR_87013572 - Project results
CJIF - Results Analysis
Also F.08 is not balance sheet report because we don't assign Financial statement version there
Regards
Tanmoy -
Regular Preventive Maintenance schedule for xsan volume ??
hi
Is there is any weekly , monthly regular Preventive Maintenance schedule which we should perform for xsan volume like defragment , some commands etc
What are the steps for regular Maintenance for xsan ,servers which apple recommends ?
thanksHi,
I do not do such maintainance. However every night a cvfsck -nv is run. This is a readonly file system check. If in the result of this a line exist which says:
Filesystem would have been modified
Then a real filesystem check is needed.
A defrag is only performed on files, not on empty space. It takes very very long, and I do not expect much of it. So I do not do this.
Hope this helps,
Regards
Donald -
Why have iCal entries suddenly appeared in duplicate for every month?
My iPhones and iPad are synced with my iMac via iCloud. All devices work perfectly except iCal on my iMac shows all entries in duplicate.
Adding a new entry shows up as a duplicate in the iMac but as a single entry on all other devices (which is correct)Cactus,
Here are two troubleshooting articles which may be helpful for you:
1. iCloud: Advanced Calendar and iCal troubleshooting
2. iCloud: Resolving duplicate calendars after setting up your calendar application for iCloud Calendar -
Maintenance schedule - Multiple counter
Hi,
For the following
Maintenance schedule for every 2 weeks or 3,000 miles:
1. Check engine oil, transmission fluid and coolant.
I need to generate a notification at 3000 miles or 14 days whichever is occured earlier (i.e.., only one notification should generate)
How we can map this scenario in PM module ?Also this is my scenario
Maintenance schedule for every month or 1,000 miles:
2. Check tire pressure - with tire gauge.
3. Check transmission fluid.
4. Check brake fluid.
5. Wax car (to protect finish).
6. Check belts and hoses.
Car maintenance schedule for every 3 months or 3,000 miles:
7. Change oil and oil filter
8. Lubricate chassis.
9. Check transmission fluid.
10. Check all drive belts (fan belts) frayed or cracked belts.
Maintenance schedule for every 6 months or 6,000 miles:
11. Change oil and filter
12. Inspect suspension.
13. Rotate tires. -
Hardware Preventive Maintenance Schedule
I'm trying to find a recommended schedule for Sun Server maintanence. If anyone can point me in the right direction it would be greatly appreciated.
Dear Makarand Gurjar
The purpose of the report is, every month begining maintenance person will give the list of equipment scheduled for preventive maintenance to production department. If that list has planned time for preventive maintenance, it will be very useful for them to release the equipment for preventive and plan the production accordingly. In IW38 / IW39, we will get only the equipment for which preventive maintenance order is created. Say for Eg. If an equipment is scheduled for every month preventive maintenance and the scheduled date is 25th of every month and call horizan is 90%, then the order will be released only on 22nd. If we take the report on 1st of the month it will not come.
In IP24 we can get all the equipment schedule for that month, but in the planned time is not there .
Regards,
Babu R -
How to run process chain in day of 20 and 2 every month?
Dear all,
I have to run process chain in day of 20 and 2 every month,but the settting of PC just allow Scheduled start every month once
time.
Please tell me the way of setting process chain.
Thanks.Hi,
(1) Create an event in the BW system
Define a system event (for example SAP_BW_TRIGGER) with Transaction SM62. Lets says it is "EVENTX". Use this even in the Process chain and execute the process chain as repeative job.
(2) Use the below lines of code in the program for calling a Fucntion which trigeres the event created above . Here in this program you will call the the Below FM if and only id the sy-datum is 20 th or 2nd of the month ( as mentioned by our friend suggested).
call function 'BP_EVENT_RAISE'
exporting
eventid = EVENTX
exceptions
bad_eventid = 1
eventid_does_not_exist = 2
eventid_missing = 3
raise_failed = 4
others = 5.
endfunction.
Regards,
Anil Kumar Sharma .P -
To retrieve SCC4 changes for a month
Hi,
We need to retrieve SCC4 changes for every month.
For this, we will have to run program RSVTPROT for table T000. Since we need this data on 1st calendar day of every month, we are scheduling a monthly job for the same.
We are facing problem while giving 'variant' for this job. Our requirement is that the report should run against a dynamic variant where the SCC4 changes for the past month is retrieved. While creating this variant we can give a particular time period only.
Please advise.
Is there any way we can create such a variant or we will have to schedule a job manually on every last day of the month with a new variant for that time period.You can use selection variables which dynamically calculate the FROM and TO dates based on the current data or an option such as "First day of the previous month" etc.
I don't see any problem, except that this is not specifically security related. Perhaps a "Did not read the documentation forum" is needed for it...
Cheers,
Julius
Maybe you are looking for
-
How can i restore my iphone 4s without connecting to itunes?
My iphone 4s wont let me access the phone and keeps saying 'the SIM car inserted in this phone is not supported...' although the sim card inserted in the phone is my original sim which ive always had with the phone. Ive tried inserting other sim card
-
How to create a file which i can attach to an email using the same print routine i use for printing
Hi all, In my current code i print a document. What I would like to do is attach this file - possibly as a pdf - to an email using the same print routine ( with some additional code obviously) Did some research on the web and can't find a solution to
-
I have a PC and a need help to configure my external hard disk on my network. Thanks
I have a PC and a need help to configure my external hard disk on my network. Thanks
-
Oracle Forma and Report Material
Hello Gurus, I would like to learn Forms and Reports 6i. Do we have a good Video material for this with examples. If not can you help me in downloading some stuffs from the internet. I would like a material from programmatic point of view. Any help o
-
I have a wireless broadband provider and when plugged directly into the device I am getting 2Meg speed. I bought a Linksys WRT54GR wireless router and after plugging the broadband device into the wireless router I am now only getting about 500Kb/s. W